blob: a03e469d1e744313be10d85a5160f043871e29d0 [file] [log] [blame]
wdenk5cf91d62004-04-23 20:32:05 +00001/*
2 * (C) Copyright 2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * This code is based on linux driver for sl811hs chip, source at
6 * drivers/usb/host/sl811.c:
7 *
8 * SL811 Host Controller Interface driver for USB.
9 *
10 * Copyright (c) 2003/06, Courage Co., Ltd.
11 *
12 * Based on:
13 * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
14 * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
15 * Adam Richter, Gregory P. Smith;
16 * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
17 * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
18 *
19 * See file CREDITS for list of people who contributed to this
20 * project.
21 *
22 * This program is free software; you can redistribute it and/or
23 * modify it under the terms of the GNU General Public License as
24 * published by the Free Software Foundation; either version 2 of
25 * the License, or (at your option) any later version.
26 *
27 * This program is distributed in the hope that it will be useful,
28 * but WITHOUT ANY WARRANTY; without even the implied warranty of
29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
30 * GNU General Public License for more details.
31 *
32 * You should have received a copy of the GNU General Public License
33 * along with this program; if not, write to the Free Software
34 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
35 * MA 02111-1307 USA
36 */
37
38#include <common.h>
wdenk5cf91d62004-04-23 20:32:05 +000039#include <mpc8xx.h>
40#include <usb.h>
41#include "sl811.h"
42
Jean-Christophe PLAGNIOL-VILLARDe4558662007-11-24 19:40:11 +010043#include "../../board/kup/common/kup.h"
wdenk5cf91d62004-04-23 20:32:05 +000044
45#ifdef __PPC__
46# define EIEIO __asm__ volatile ("eieio")
47#else
48# define EIEIO /* nothing */
49#endif
50
51#define SL811_ADR (0x50000000)
52#define SL811_DAT (0x50000001)
53
54#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
55
56#ifdef SL811_DEBUG
57static int debug = 9;
58#endif
59
60static int root_hub_devnum = 0;
61static struct usb_port_status rh_status = { 0 };/* root hub port status */
62
63static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
64 void *data, int buf_len, struct devrequest *cmd);
65
66static void sl811_write (__u8 index, __u8 data)
67{
68 *(volatile unsigned char *) (SL811_ADR) = index;
69 EIEIO;
70 *(volatile unsigned char *) (SL811_DAT) = data;
71 EIEIO;
72}
73
74static __u8 sl811_read (__u8 index)
75{
76 __u8 data;
77
78 *(volatile unsigned char *) (SL811_ADR) = index;
79 EIEIO;
80 data = *(volatile unsigned char *) (SL811_DAT);
81 EIEIO;
82 return (data);
83}
84
85/*
86 * Read consecutive bytes of data from the SL811H/SL11H buffer
87 */
88static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
89{
90 *(volatile unsigned char *) (SL811_ADR) = offset;
91 EIEIO;
92 while (size--) {
93 *buf++ = *(volatile unsigned char *) (SL811_DAT);
94 EIEIO;
95 }
96}
97
98/*
99 * Write consecutive bytes of data to the SL811H/SL11H buffer
100 */
101static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
102{
103 *(volatile unsigned char *) (SL811_ADR) = offset;
104 EIEIO;
105 while (size--) {
106 *(volatile unsigned char *) (SL811_DAT) = *buf++;
107 EIEIO;
108 }
109}
110
111int usb_init_kup4x (void)
112{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200113 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
wdenk5cf91d62004-04-23 20:32:05 +0000114 volatile memctl8xx_t *memctl = &immap->im_memctl;
115 int i;
116 unsigned char tmp;
117
118 memctl = &immap->im_memctl;
119 memctl->memc_or7 = 0xFFFF8726;
120 memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */
121 /* BP 14 low = USB ON */
122 immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
123 /* PB 14 nomal port */
124 immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
125 /* output */
126 immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
127
128 puts ("USB: ");
129
130 for (i = 0x10; i < 0xff; i++) {
131 sl811_write(i, i);
132 tmp = (sl811_read(i));
133 if (tmp != i) {
134 printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
135 return (-1);
136 }
137 }
138 printf ("SL811 ready\n");
139 return (0);
140}
141
142/*
143 * This function resets SL811HS controller and detects the speed of
144 * the connecting device
145 *
146 * Return: 0 = no device attached; 1 = USB device attached
147 */
148static int sl811_hc_reset(void)
149{
150 int status ;
151
152 sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
153 sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
154
155 mdelay(20);
156
157 /* Disable hardware SOF generation, clear all irq status. */
158 sl811_write(SL811_CTRL1, 0);
159 mdelay(2);
160 sl811_write(SL811_INTRSTS, 0xff);
161 status = sl811_read(SL811_INTRSTS);
162
163 if (status & SL811_INTR_NOTPRESENT) {
164 /* Device is not present */
165 PDEBUG(0, "Device not present\n");
166 rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
167 rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
168 sl811_write(SL811_INTR, SL811_INTR_INSRMV);
169 return 0;
170 }
171
172 /* Send SOF to address 0, endpoint 0. */
173 sl811_write(SL811_LEN_B, 0);
174 sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
175 sl811_write(SL811_DEV_B, 0x00);
176 sl811_write(SL811_SOFLOW, SL811_12M_LOW);
177
178 if (status & SL811_INTR_SPEED_FULL) {
179 /* full speed device connect directly to root hub */
180 PDEBUG (0, "Full speed Device attached\n");
181
182 sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
183 mdelay(20);
184 sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
185 sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
186
187 /* start the SOF or EOP */
188 sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
189 rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
190 rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
191 mdelay(2);
192 sl811_write(SL811_INTRSTS, 0xff);
193 } else {
194 /* slow speed device connect directly to root-hub */
195 PDEBUG(0, "Low speed Device attached\n");
196
197 sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
198 mdelay(20);
199 sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
200 sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
201
202 /* start the SOF or EOP */
203 sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
204 rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
205 mdelay(2);
206 sl811_write(SL811_INTRSTS, 0xff);
207 }
208
209 rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
210 sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
211
212 return 1;
213}
214
215int usb_lowlevel_init(void)
216{
217 root_hub_devnum = 0;
218 sl811_hc_reset();
219 return 0;
220}
221
222int usb_lowlevel_stop(void)
223{
224 sl811_hc_reset();
225 return 0;
226}
227
wdenk953e2062004-05-12 13:20:19 +0000228static int calc_needed_buswidth(int bytes, int need_preamble)
wdenk32877d62004-05-05 19:44:41 +0000229{
wdenk953e2062004-05-12 13:20:19 +0000230 return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048;
wdenk32877d62004-05-05 19:44:41 +0000231}
232
wdenk953e2062004-05-12 13:20:19 +0000233static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len)
wdenk5cf91d62004-04-23 20:32:05 +0000234{
235 __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
wdenk2729af92004-05-03 20:45:30 +0000236 __u16 status = 0;
wdenk953e2062004-05-12 13:20:19 +0000237 int err = 0, time_start = get_timer(0);
238 int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
239 usb_pipeslow(pipe);
wdenk5cf91d62004-04-23 20:32:05 +0000240
241 if (len > 239)
242 return -1;
243
wdenk953e2062004-05-12 13:20:19 +0000244 if (usb_pipeout(pipe))
wdenk5cf91d62004-04-23 20:32:05 +0000245 ctrl |= SL811_USB_CTRL_DIR_OUT;
wdenk953e2062004-05-12 13:20:19 +0000246 if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
wdenk5cf91d62004-04-23 20:32:05 +0000247 ctrl |= SL811_USB_CTRL_TOGGLE_1;
wdenk953e2062004-05-12 13:20:19 +0000248 if (need_preamble)
249 ctrl |= SL811_USB_CTRL_PREAMBLE;
wdenk02b11f82004-05-12 22:54:36 +0000250
wdenk2729af92004-05-03 20:45:30 +0000251 sl811_write(SL811_INTRSTS, 0xff);
wdenk5cf91d62004-04-23 20:32:05 +0000252
253 while (err < 3) {
wdenk2729af92004-05-03 20:45:30 +0000254 sl811_write(SL811_ADDR_A, 0x10);
255 sl811_write(SL811_LEN_A, len);
wdenk953e2062004-05-12 13:20:19 +0000256 if (usb_pipeout(pipe) && len)
wdenk2729af92004-05-03 20:45:30 +0000257 sl811_write_buf(0x10, buffer, len);
258
wdenk953e2062004-05-12 13:20:19 +0000259 if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
260 sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble))
wdenk5cf91d62004-04-23 20:32:05 +0000261 ctrl |= SL811_USB_CTRL_SOF;
262 else
263 ctrl &= ~SL811_USB_CTRL_SOF;
wdenk2729af92004-05-03 20:45:30 +0000264
wdenk5cf91d62004-04-23 20:32:05 +0000265 sl811_write(SL811_CTRL_A, ctrl);
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200266 while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200267 if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
wdenk2729af92004-05-03 20:45:30 +0000268 printf("USB transmit timed out\n");
269 return -USB_ST_CRC_ERR;
270 }
271 }
wdenk5cf91d62004-04-23 20:32:05 +0000272
273 sl811_write(SL811_INTRSTS, 0xff);
274 status = sl811_read(SL811_STS_A);
275
276 if (status & SL811_USB_STS_ACK) {
277 int remainder = sl811_read(SL811_CNT_A);
278 if (remainder) {
279 PDEBUG(0, "usb transfer remainder = %d\n", remainder);
280 len -= remainder;
281 }
wdenk953e2062004-05-12 13:20:19 +0000282 if (usb_pipein(pipe) && len)
wdenk5cf91d62004-04-23 20:32:05 +0000283 sl811_read_buf(0x10, buffer, len);
284 return len;
285 }
286
287 if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
288 continue;
289
290 PDEBUG(0, "usb transfer error %#x\n", (int)status);
291 err++;
292 }
293
wdenk2729af92004-05-03 20:45:30 +0000294 err = 0;
295
296 if (status & SL811_USB_STS_ERROR)
297 err |= USB_ST_BUF_ERR;
298 if (status & SL811_USB_STS_TIMEOUT)
299 err |= USB_ST_CRC_ERR;
300 if (status & SL811_USB_STS_STALL)
301 err |= USB_ST_STALLED;
302
303 return -err;
wdenk5cf91d62004-04-23 20:32:05 +0000304}
305
306int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
307 int len)
308{
309 int dir_out = usb_pipeout(pipe);
310 int ep = usb_pipeendpoint(pipe);
wdenk5cf91d62004-04-23 20:32:05 +0000311 int max = usb_maxpacket(dev, pipe);
312 int done = 0;
313
314 PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
315 usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
316
317 dev->status = 0;
318
319 sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
320 sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
321 while (done < len) {
wdenk953e2062004-05-12 13:20:19 +0000322 int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
wdenk5cf91d62004-04-23 20:32:05 +0000323 max > len - done ? len - done : max);
324 if (res < 0) {
wdenk2729af92004-05-03 20:45:30 +0000325 dev->status = -res;
wdenk5cf91d62004-04-23 20:32:05 +0000326 return res;
327 }
328
329 if (!dir_out && res < max) /* short packet */
330 break;
331
332 done += res;
333 usb_dotoggle(dev, ep, dir_out);
334 }
335
336 dev->act_len = done;
337
338 return 0;
339}
340
341int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
342 int len,struct devrequest *setup)
343{
344 int done = 0;
345 int devnum = usb_pipedevice(pipe);
wdenk953e2062004-05-12 13:20:19 +0000346 int ep = usb_pipeendpoint(pipe);
wdenk5cf91d62004-04-23 20:32:05 +0000347
348 dev->status = 0;
349
350 if (devnum == root_hub_devnum)
351 return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
352
wdenk953e2062004-05-12 13:20:19 +0000353 PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n",
354 devnum, ep, buffer, len, (int)setup->requesttype,
355 (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64);
wdenk5cf91d62004-04-23 20:32:05 +0000356
357 sl811_write(SL811_DEV_A, devnum);
wdenk953e2062004-05-12 13:20:19 +0000358 sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep));
wdenk5cf91d62004-04-23 20:32:05 +0000359 /* setup phase */
wdenk953e2062004-05-12 13:20:19 +0000360 usb_settoggle(dev, ep, 1, 0);
361 if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep),
362 (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
363 int dir_in = usb_pipein(pipe);
wdenk5cf91d62004-04-23 20:32:05 +0000364 int max = usb_maxpacket(dev, pipe);
365
366 /* data phase */
367 sl811_write(SL811_PIDEP_A,
wdenk953e2062004-05-12 13:20:19 +0000368 PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep));
369 usb_settoggle(dev, ep, usb_pipeout(pipe), 1);
wdenk5cf91d62004-04-23 20:32:05 +0000370 while (done < len) {
wdenk953e2062004-05-12 13:20:19 +0000371 int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
wdenk5cf91d62004-04-23 20:32:05 +0000372 max > len - done ? len - done : max);
wdenk2729af92004-05-03 20:45:30 +0000373 if (res < 0) {
wdenk953e2062004-05-12 13:20:19 +0000374 PDEBUG(0, "status data failed!\n");
wdenk2729af92004-05-03 20:45:30 +0000375 dev->status = -res;
376 return 0;
377 }
wdenk5cf91d62004-04-23 20:32:05 +0000378 done += res;
wdenk953e2062004-05-12 13:20:19 +0000379 usb_dotoggle(dev, ep, usb_pipeout(pipe));
wdenk5cf91d62004-04-23 20:32:05 +0000380 if (dir_in && res < max) /* short packet */
381 break;
wdenk5cf91d62004-04-23 20:32:05 +0000382 }
383
384 /* status phase */
385 sl811_write(SL811_PIDEP_A,
wdenk953e2062004-05-12 13:20:19 +0000386 PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep));
387 usb_settoggle(dev, ep, !usb_pipeout(pipe), 1);
wdenk02b11f82004-05-12 22:54:36 +0000388 if (sl811_send_packet(dev,
389 !dir_in ? usb_rcvctrlpipe(dev, ep) :
390 usb_sndctrlpipe(dev, ep),
wdenk953e2062004-05-12 13:20:19 +0000391 0, 0) < 0) {
wdenk5cf91d62004-04-23 20:32:05 +0000392 PDEBUG(0, "status phase failed!\n");
393 dev->status = -1;
394 }
395 } else {
396 PDEBUG(0, "setup phase failed!\n");
397 dev->status = -1;
398 }
399
400 dev->act_len = done;
401
402 return done;
403}
404
405int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
406 int len, int interval)
407{
wdenk2729af92004-05-03 20:45:30 +0000408 PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
wdenk5cf91d62004-04-23 20:32:05 +0000409 buffer, len, interval);
410 return -1;
411}
412
413/*
414 * SL811 Virtual Root Hub
415 */
416
417/* Device descriptor */
418static __u8 sl811_rh_dev_des[] =
419{
420 0x12, /* __u8 bLength; */
421 0x01, /* __u8 bDescriptorType; Device */
422 0x10, /* __u16 bcdUSB; v1.1 */
423 0x01,
424 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
425 0x00, /* __u8 bDeviceSubClass; */
426 0x00, /* __u8 bDeviceProtocol; */
427 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
428 0x00, /* __u16 idVendor; */
429 0x00,
430 0x00, /* __u16 idProduct; */
431 0x00,
432 0x00, /* __u16 bcdDevice; */
433 0x00,
434 0x00, /* __u8 iManufacturer; */
435 0x02, /* __u8 iProduct; */
436 0x01, /* __u8 iSerialNumber; */
437 0x01 /* __u8 bNumConfigurations; */
438};
439
440/* Configuration descriptor */
441static __u8 sl811_rh_config_des[] =
442{
443 0x09, /* __u8 bLength; */
444 0x02, /* __u8 bDescriptorType; Configuration */
445 0x19, /* __u16 wTotalLength; */
446 0x00,
447 0x01, /* __u8 bNumInterfaces; */
448 0x01, /* __u8 bConfigurationValue; */
449 0x00, /* __u8 iConfiguration; */
450 0x40, /* __u8 bmAttributes;
451 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
452 4..0: resvd */
453 0x00, /* __u8 MaxPower; */
454
455 /* interface */
456 0x09, /* __u8 if_bLength; */
457 0x04, /* __u8 if_bDescriptorType; Interface */
458 0x00, /* __u8 if_bInterfaceNumber; */
459 0x00, /* __u8 if_bAlternateSetting; */
460 0x01, /* __u8 if_bNumEndpoints; */
461 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
462 0x00, /* __u8 if_bInterfaceSubClass; */
463 0x00, /* __u8 if_bInterfaceProtocol; */
464 0x00, /* __u8 if_iInterface; */
465
466 /* endpoint */
467 0x07, /* __u8 ep_bLength; */
468 0x05, /* __u8 ep_bDescriptorType; Endpoint */
469 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
470 0x03, /* __u8 ep_bmAttributes; Interrupt */
471 0x08, /* __u16 ep_wMaxPacketSize; */
472 0x00,
473 0xff /* __u8 ep_bInterval; 255 ms */
474};
475
476/* root hub class descriptor*/
477static __u8 sl811_rh_hub_des[] =
478{
479 0x09, /* __u8 bLength; */
480 0x29, /* __u8 bDescriptorType; Hub-descriptor */
481 0x01, /* __u8 bNbrPorts; */
482 0x00, /* __u16 wHubCharacteristics; */
483 0x00,
484 0x50, /* __u8 bPwrOn2pwrGood; 2ms */
485 0x00, /* __u8 bHubContrCurrent; 0 mA */
486 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */
487 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
488};
489
490/*
491 * helper routine for returning string descriptors in UTF-16LE
492 * input can actually be ISO-8859-1; ASCII is its 7-bit subset
493 */
494static int ascii2utf (char *s, u8 *utf, int utfmax)
495{
496 int retval;
497
498 for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
499 *utf++ = *s++;
500 *utf++ = 0;
501 }
502 return retval;
503}
504
505/*
506 * root_hub_string is used by each host controller's root hub code,
507 * so that they're identified consistently throughout the system.
508 */
wdenk32877d62004-05-05 19:44:41 +0000509static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
wdenk5cf91d62004-04-23 20:32:05 +0000510{
511 char buf [30];
512
513 /* assert (len > (2 * (sizeof (buf) + 1)));
514 assert (strlen (type) <= 8);*/
515
516 /* language ids */
517 if (id == 0) {
wdenk953e2062004-05-12 13:20:19 +0000518 *data++ = 4; *data++ = 3; /* 4 bytes data */
wdenk5cf91d62004-04-23 20:32:05 +0000519 *data++ = 0; *data++ = 0; /* some language id */
520 return 4;
521
522 /* serial number */
523 } else if (id == 1) {
wdenk953e2062004-05-12 13:20:19 +0000524 sprintf (buf, "%#x", serial);
wdenk5cf91d62004-04-23 20:32:05 +0000525
526 /* product description */
527 } else if (id == 2) {
528 sprintf (buf, "USB %s Root Hub", type);
529
530 /* id 3 == vendor description */
531
532 /* unsupported IDs --> "stall" */
533 } else
534 return 0;
535
wdenk953e2062004-05-12 13:20:19 +0000536 ascii2utf (buf, data + 2, len - 2);
537 data [0] = 2 + strlen(buf) * 2;
wdenk5cf91d62004-04-23 20:32:05 +0000538 data [1] = 3;
539 return data [0];
540}
541
542/* helper macro */
543#define OK(x) len = (x); break
544
545/*
546 * This function handles all USB request to the the virtual root hub
547 */
548static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
549 void *data, int buf_len, struct devrequest *cmd)
550{
551 __u8 data_buf[16];
552 __u8 *bufp = data_buf;
553 int len = 0;
554 int status = 0;
555
556 __u16 bmRType_bReq;
557 __u16 wValue;
558 __u16 wIndex;
559 __u16 wLength;
560
561 if (usb_pipeint(pipe)) {
562 PDEBUG(0, "interrupt transfer unimplemented!\n");
563 return 0;
564 }
565
566 bmRType_bReq = cmd->requesttype | (cmd->request << 8);
567 wValue = le16_to_cpu (cmd->value);
568 wIndex = le16_to_cpu (cmd->index);
569 wLength = le16_to_cpu (cmd->length);
570
571 PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
572 bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
573
574 /* Request Destination:
575 without flags: Device,
576 USB_RECIP_INTERFACE: interface,
577 USB_RECIP_ENDPOINT: endpoint,
578 USB_TYPE_CLASS means HUB here,
579 USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here
580 */
581 switch (bmRType_bReq) {
582 case RH_GET_STATUS:
583 *(__u16 *)bufp = cpu_to_le16(1);
584 OK(2);
585
586 case RH_GET_STATUS | USB_RECIP_INTERFACE:
587 *(__u16 *)bufp = cpu_to_le16(0);
588 OK(2);
589
590 case RH_GET_STATUS | USB_RECIP_ENDPOINT:
591 *(__u16 *)bufp = cpu_to_le16(0);
592 OK(2);
593
594 case RH_GET_STATUS | USB_TYPE_CLASS:
595 *(__u32 *)bufp = cpu_to_le32(0);
596 OK(4);
597
598 case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
599 *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
600 OK(4);
601
602 case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
603 switch (wValue) {
604 case 1:
605 OK(0);
606 }
607 break;
608
609 case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
610 switch (wValue) {
611 case C_HUB_LOCAL_POWER:
612 OK(0);
613
614 case C_HUB_OVER_CURRENT:
615 OK(0);
616 }
617 break;
618
619 case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
620 switch (wValue) {
621 case USB_PORT_FEAT_ENABLE:
622 rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
623 OK(0);
624
625 case USB_PORT_FEAT_SUSPEND:
626 rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
627 OK(0);
628
629 case USB_PORT_FEAT_POWER:
630 rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
631 OK(0);
632
633 case USB_PORT_FEAT_C_CONNECTION:
634 rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
635 OK(0);
636
637 case USB_PORT_FEAT_C_ENABLE:
638 rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
639 OK(0);
640
641 case USB_PORT_FEAT_C_SUSPEND:
642 rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
643 OK(0);
644
645 case USB_PORT_FEAT_C_OVER_CURRENT:
646 rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
647 OK(0);
648
649 case USB_PORT_FEAT_C_RESET:
650 rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
651 OK(0);
652 }
653 break;
654
655 case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
656 switch (wValue) {
657 case USB_PORT_FEAT_SUSPEND:
658 rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
659 OK(0);
660
661 case USB_PORT_FEAT_RESET:
662 rh_status.wPortStatus |= USB_PORT_STAT_RESET;
663 rh_status.wPortChange = 0;
664 rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
665 rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
666 rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
667 OK(0);
668
669 case USB_PORT_FEAT_POWER:
670 rh_status.wPortStatus |= USB_PORT_STAT_POWER;
671 OK(0);
672
673 case USB_PORT_FEAT_ENABLE:
674 rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
675 OK(0);
676 }
677 break;
678
679 case RH_SET_ADDRESS:
680 root_hub_devnum = wValue;
681 OK(0);
682
683 case RH_GET_DESCRIPTOR:
684 switch ((wValue & 0xff00) >> 8) {
685 case USB_DT_DEVICE:
686 len = sizeof(sl811_rh_dev_des);
687 bufp = sl811_rh_dev_des;
688 OK(len);
689
690 case USB_DT_CONFIG:
691 len = sizeof(sl811_rh_config_des);
692 bufp = sl811_rh_config_des;
693 OK(len);
694
695 case USB_DT_STRING:
696 len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength);
697 if (len > 0) {
698 bufp = data;
699 OK(len);
700 }
701
702 default:
703 status = -32;
704 }
705 break;
706
707 case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
708 len = sizeof(sl811_rh_hub_des);
709 bufp = sl811_rh_hub_des;
710 OK(len);
711
712 case RH_GET_CONFIGURATION:
713 bufp[0] = 0x01;
714 OK(1);
715
716 case RH_SET_CONFIGURATION:
717 OK(0);
718
719 default:
720 PDEBUG(1, "unsupported root hub command\n");
721 status = -32;
722 }
723
724 len = min(len, buf_len);
725 if (data != bufp)
726 memcpy(data, bufp, len);
727
728 PDEBUG(5, "len = %d, status = %d\n", len, status);
729
730 usb_dev->status = status;
731 usb_dev->act_len = len;
732
733 return status == 0 ? len : status;
734}