Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Renesas RCar Gen2 CPG MSSR driver |
| 4 | * |
| 5 | * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> |
| 6 | * |
| 7 | * Based on the following driver from Linux kernel: |
| 8 | * r8a7796 Clock Pulse Generator / Module Standby and Software Reset |
| 9 | * |
| 10 | * Copyright (C) 2016 Glider bvba |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 11 | */ |
| 12 | |
| 13 | #include <common.h> |
| 14 | #include <clk-uclass.h> |
| 15 | #include <dm.h> |
| 16 | #include <errno.h> |
Simon Glass | f7ae49f | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 17 | #include <log.h> |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 18 | #include <asm/io.h> |
| 19 | |
| 20 | #include <dt-bindings/clock/renesas-cpg-mssr.h> |
| 21 | |
| 22 | #include "renesas-cpg-mssr.h" |
| 23 | #include "rcar-gen2-cpg.h" |
| 24 | |
| 25 | #define CPG_RST_MODEMR 0x0060 |
| 26 | |
| 27 | #define CPG_PLL0CR 0x00d8 |
| 28 | #define CPG_SDCKCR 0x0074 |
| 29 | |
| 30 | struct clk_div_table { |
| 31 | u8 val; |
| 32 | u8 div; |
| 33 | }; |
| 34 | |
| 35 | /* SDHI divisors */ |
| 36 | static const struct clk_div_table cpg_sdh_div_table[] = { |
| 37 | { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, |
| 38 | { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, |
| 39 | { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 }, |
| 40 | }; |
| 41 | |
| 42 | static const struct clk_div_table cpg_sd01_div_table[] = { |
| 43 | { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, |
| 44 | { 8, 24 }, { 10, 36 }, { 11, 48 }, { 12, 10 }, |
| 45 | { 0, 0 }, |
| 46 | }; |
| 47 | |
Marek Vasut | 45b01b4 | 2019-03-18 05:11:42 +0100 | [diff] [blame] | 48 | static u8 gen2_clk_get_sdh_div(const struct clk_div_table *table, u8 val) |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 49 | { |
Marek Vasut | 45b01b4 | 2019-03-18 05:11:42 +0100 | [diff] [blame] | 50 | for (;;) { |
| 51 | if (!(*table).div) |
| 52 | return 0xff; |
| 53 | |
| 54 | if ((*table).val == val) |
| 55 | return (*table).div; |
| 56 | |
| 57 | table++; |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 58 | } |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 59 | } |
| 60 | |
| 61 | static int gen2_clk_enable(struct clk *clk) |
| 62 | { |
| 63 | struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| 64 | |
| 65 | return renesas_clk_endisable(clk, priv->base, true); |
| 66 | } |
| 67 | |
| 68 | static int gen2_clk_disable(struct clk *clk) |
| 69 | { |
| 70 | struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| 71 | |
| 72 | return renesas_clk_endisable(clk, priv->base, false); |
| 73 | } |
| 74 | |
| 75 | static ulong gen2_clk_get_rate(struct clk *clk) |
| 76 | { |
| 77 | struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| 78 | struct cpg_mssr_info *info = priv->info; |
| 79 | struct clk parent; |
| 80 | const struct cpg_core_clk *core; |
| 81 | const struct rcar_gen2_cpg_pll_config *pll_config = |
| 82 | priv->cpg_pll_config; |
| 83 | u32 value, mult, div, rate = 0; |
| 84 | int ret; |
| 85 | |
| 86 | debug("%s[%i] Clock: id=%lu\n", __func__, __LINE__, clk->id); |
| 87 | |
| 88 | ret = renesas_clk_get_parent(clk, info, &parent); |
| 89 | if (ret) { |
| 90 | printf("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| 91 | return ret; |
| 92 | } |
| 93 | |
| 94 | if (renesas_clk_is_mod(clk)) { |
| 95 | rate = gen2_clk_get_rate(&parent); |
| 96 | debug("%s[%i] MOD clk: parent=%lu => rate=%u\n", |
| 97 | __func__, __LINE__, parent.id, rate); |
| 98 | return rate; |
| 99 | } |
| 100 | |
| 101 | ret = renesas_clk_get_core(clk, info, &core); |
| 102 | if (ret) |
| 103 | return ret; |
| 104 | |
| 105 | switch (core->type) { |
| 106 | case CLK_TYPE_IN: |
| 107 | if (core->id == info->clk_extal_id) { |
| 108 | rate = clk_get_rate(&priv->clk_extal); |
| 109 | debug("%s[%i] EXTAL clk: rate=%u\n", |
| 110 | __func__, __LINE__, rate); |
| 111 | return rate; |
| 112 | } |
| 113 | |
| 114 | if (core->id == info->clk_extal_usb_id) { |
| 115 | rate = clk_get_rate(&priv->clk_extal_usb); |
| 116 | debug("%s[%i] EXTALR clk: rate=%u\n", |
| 117 | __func__, __LINE__, rate); |
| 118 | return rate; |
| 119 | } |
| 120 | |
| 121 | return -EINVAL; |
| 122 | |
| 123 | case CLK_TYPE_FF: |
| 124 | rate = (gen2_clk_get_rate(&parent) * core->mult) / core->div; |
Marek Vasut | 4b135d5 | 2019-03-18 05:38:08 +0100 | [diff] [blame] | 125 | debug("%s[%i] FIXED clk: parent=%i mul=%i div=%i => rate=%u\n", |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 126 | __func__, __LINE__, |
| 127 | core->parent, core->mult, core->div, rate); |
| 128 | return rate; |
| 129 | |
| 130 | case CLK_TYPE_DIV6P1: /* DIV6 Clock with 1 parent clock */ |
| 131 | value = (readl(priv->base + core->offset) & 0x3f) + 1; |
| 132 | rate = gen2_clk_get_rate(&parent) / value; |
| 133 | debug("%s[%i] DIV6P1 clk: parent=%i div=%i => rate=%u\n", |
| 134 | __func__, __LINE__, |
| 135 | core->parent, value, rate); |
| 136 | return rate; |
| 137 | |
| 138 | case CLK_TYPE_GEN2_MAIN: |
| 139 | rate = gen2_clk_get_rate(&parent) / pll_config->extal_div; |
| 140 | debug("%s[%i] MAIN clk: parent=%i extal_div=%i => rate=%u\n", |
| 141 | __func__, __LINE__, |
| 142 | core->parent, pll_config->extal_div, rate); |
| 143 | return rate; |
| 144 | |
| 145 | case CLK_TYPE_GEN2_PLL0: |
| 146 | /* |
| 147 | * PLL0 is a configurable multiplier clock except on R-Car |
| 148 | * V2H/E2. Register the PLL0 clock as a fixed factor clock for |
| 149 | * now as there's no generic multiplier clock implementation and |
| 150 | * we currently have no need to change the multiplier value. |
| 151 | */ |
| 152 | mult = pll_config->pll0_mult; |
| 153 | if (!mult) { |
| 154 | value = readl(priv->base + CPG_PLL0CR); |
| 155 | mult = (((value >> 24) & 0x7f) + 1) * 2; |
| 156 | } |
| 157 | |
| 158 | rate = (gen2_clk_get_rate(&parent) * mult) / info->pll0_div; |
| 159 | debug("%s[%i] PLL0 clk: parent=%i mult=%u => rate=%u\n", |
| 160 | __func__, __LINE__, core->parent, mult, rate); |
| 161 | return rate; |
| 162 | |
| 163 | case CLK_TYPE_GEN2_PLL1: |
| 164 | rate = (gen2_clk_get_rate(&parent) * pll_config->pll1_mult) / 2; |
| 165 | debug("%s[%i] PLL1 clk: parent=%i mul=%i => rate=%u\n", |
| 166 | __func__, __LINE__, |
| 167 | core->parent, pll_config->pll1_mult, rate); |
| 168 | return rate; |
| 169 | |
| 170 | case CLK_TYPE_GEN2_PLL3: |
| 171 | rate = gen2_clk_get_rate(&parent) * pll_config->pll3_mult; |
| 172 | debug("%s[%i] PLL3 clk: parent=%i mul=%i => rate=%u\n", |
| 173 | __func__, __LINE__, |
| 174 | core->parent, pll_config->pll3_mult, rate); |
| 175 | return rate; |
| 176 | |
| 177 | case CLK_TYPE_GEN2_SDH: |
| 178 | value = (readl(priv->base + CPG_SDCKCR) >> 8) & 0xf; |
| 179 | div = gen2_clk_get_sdh_div(cpg_sdh_div_table, value); |
| 180 | rate = gen2_clk_get_rate(&parent) / div; |
| 181 | debug("%s[%i] SDH clk: parent=%i div=%i => rate=%u\n", |
| 182 | __func__, __LINE__, |
| 183 | core->parent, div, rate); |
| 184 | return rate; |
| 185 | |
| 186 | case CLK_TYPE_GEN2_SD0: |
| 187 | value = (readl(priv->base + CPG_SDCKCR) >> 4) & 0xf; |
| 188 | div = gen2_clk_get_sdh_div(cpg_sd01_div_table, value); |
| 189 | rate = gen2_clk_get_rate(&parent) / div; |
| 190 | debug("%s[%i] SD0 clk: parent=%i div=%i => rate=%u\n", |
| 191 | __func__, __LINE__, |
| 192 | core->parent, div, rate); |
| 193 | return rate; |
| 194 | |
| 195 | case CLK_TYPE_GEN2_SD1: |
| 196 | value = (readl(priv->base + CPG_SDCKCR) >> 0) & 0xf; |
| 197 | div = gen2_clk_get_sdh_div(cpg_sd01_div_table, value); |
| 198 | rate = gen2_clk_get_rate(&parent) / div; |
| 199 | debug("%s[%i] SD1 clk: parent=%i div=%i => rate=%u\n", |
| 200 | __func__, __LINE__, |
| 201 | core->parent, div, rate); |
| 202 | return rate; |
| 203 | } |
| 204 | |
| 205 | printf("%s[%i] unknown fail\n", __func__, __LINE__); |
| 206 | |
| 207 | return -ENOENT; |
| 208 | } |
| 209 | |
Marek Vasut | 3cb2849 | 2019-03-18 06:04:02 +0100 | [diff] [blame] | 210 | static int gen2_clk_setup_mmcif_div(struct clk *clk, ulong rate) |
| 211 | { |
| 212 | struct gen2_clk_priv *priv = dev_get_priv(clk->dev); |
| 213 | struct cpg_mssr_info *info = priv->info; |
| 214 | const struct cpg_core_clk *core; |
| 215 | struct clk parent, pparent; |
| 216 | u32 val; |
| 217 | int ret; |
| 218 | |
| 219 | ret = renesas_clk_get_parent(clk, info, &parent); |
| 220 | if (ret) { |
| 221 | debug("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| 222 | return ret; |
| 223 | } |
| 224 | |
| 225 | if (renesas_clk_is_mod(&parent)) |
| 226 | return 0; |
| 227 | |
| 228 | ret = renesas_clk_get_core(&parent, info, &core); |
| 229 | if (ret) |
| 230 | return ret; |
| 231 | |
| 232 | if (strcmp(core->name, "mmc0") && strcmp(core->name, "mmc1")) |
| 233 | return 0; |
| 234 | |
| 235 | ret = renesas_clk_get_parent(&parent, info, &pparent); |
| 236 | if (ret) { |
| 237 | debug("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); |
| 238 | return ret; |
| 239 | } |
| 240 | |
| 241 | val = (gen2_clk_get_rate(&pparent) / rate) - 1; |
| 242 | |
| 243 | debug("%s[%i] MMCIF offset=%x\n", __func__, __LINE__, core->offset); |
| 244 | |
| 245 | writel(val, priv->base + core->offset); |
| 246 | |
| 247 | return 0; |
| 248 | } |
| 249 | |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 250 | static ulong gen2_clk_set_rate(struct clk *clk, ulong rate) |
| 251 | { |
Marek Vasut | 3cb2849 | 2019-03-18 06:04:02 +0100 | [diff] [blame] | 252 | /* Force correct MMC-IF divider configuration if applicable */ |
| 253 | gen2_clk_setup_mmcif_div(clk, rate); |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 254 | return gen2_clk_get_rate(clk); |
| 255 | } |
| 256 | |
| 257 | static int gen2_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) |
| 258 | { |
| 259 | if (args->args_count != 2) { |
| 260 | debug("Invaild args_count: %d\n", args->args_count); |
| 261 | return -EINVAL; |
| 262 | } |
| 263 | |
| 264 | clk->id = (args->args[0] << 16) | args->args[1]; |
| 265 | |
| 266 | return 0; |
| 267 | } |
| 268 | |
| 269 | const struct clk_ops gen2_clk_ops = { |
| 270 | .enable = gen2_clk_enable, |
| 271 | .disable = gen2_clk_disable, |
| 272 | .get_rate = gen2_clk_get_rate, |
| 273 | .set_rate = gen2_clk_set_rate, |
| 274 | .of_xlate = gen2_clk_of_xlate, |
| 275 | }; |
| 276 | |
| 277 | int gen2_clk_probe(struct udevice *dev) |
| 278 | { |
| 279 | struct gen2_clk_priv *priv = dev_get_priv(dev); |
| 280 | struct cpg_mssr_info *info = |
| 281 | (struct cpg_mssr_info *)dev_get_driver_data(dev); |
| 282 | fdt_addr_t rst_base; |
| 283 | u32 cpg_mode; |
| 284 | int ret; |
| 285 | |
Masahiro Yamada | 8613c8d | 2020-07-17 14:36:46 +0900 | [diff] [blame] | 286 | priv->base = dev_read_addr_ptr(dev); |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 287 | if (!priv->base) |
| 288 | return -EINVAL; |
| 289 | |
| 290 | priv->info = info; |
| 291 | ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1, info->reset_node); |
| 292 | if (ret < 0) |
| 293 | return ret; |
| 294 | |
Marek Vasut | 061ef41 | 2020-03-21 16:45:29 +0100 | [diff] [blame] | 295 | rst_base = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, ret, "reg", |
| 296 | 0, NULL, false); |
Marek Vasut | dedb60f | 2018-01-08 16:38:51 +0100 | [diff] [blame] | 297 | if (rst_base == FDT_ADDR_T_NONE) |
| 298 | return -EINVAL; |
| 299 | |
| 300 | cpg_mode = readl(rst_base + CPG_RST_MODEMR); |
| 301 | |
| 302 | priv->cpg_pll_config = |
| 303 | (struct rcar_gen2_cpg_pll_config *)info->get_pll_config(cpg_mode); |
| 304 | if (!priv->cpg_pll_config->extal_div) |
| 305 | return -EINVAL; |
| 306 | |
| 307 | ret = clk_get_by_name(dev, "extal", &priv->clk_extal); |
| 308 | if (ret < 0) |
| 309 | return ret; |
| 310 | |
| 311 | if (info->extal_usb_node) { |
| 312 | ret = clk_get_by_name(dev, info->extal_usb_node, |
| 313 | &priv->clk_extal_usb); |
| 314 | if (ret < 0) |
| 315 | return ret; |
| 316 | } |
| 317 | |
| 318 | return 0; |
| 319 | } |
| 320 | |
| 321 | int gen2_clk_remove(struct udevice *dev) |
| 322 | { |
| 323 | struct gen2_clk_priv *priv = dev_get_priv(dev); |
| 324 | |
| 325 | return renesas_clk_remove(priv->base, priv->info); |
| 326 | } |