blob: 30a5859c55f7203622b10768d7a1aa22b77e4f8c [file] [log] [blame]
Suriyan Ramasami0ad6c342013-04-11 07:17:25 +00001/*
2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
3 *
4 * Based on dockstar.h originally written by
5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
6 *
7 * Based on sheevaplug.h originally written by
8 * Prafulla Wadaskar <prafulla@marvell.com>
9 * (C) Copyright 2009
10 * Marvell Semiconductor <www.marvell.com>
11 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020012 * SPDX-License-Identifier: GPL-2.0+
Suriyan Ramasami0ad6c342013-04-11 07:17:25 +000013 */
14
15#ifndef _CONFIG_GOFLEXHOME_H
16#define _CONFIG_GOFLEXHOME_H
17
18/*
19 * Version number information
20 */
21#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
22
23/*
24 * High Level Configuration Options (easy to change)
25 */
26#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
27#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
28#define CONFIG_KW88F6281 1 /* SOC Name */
29#define CONFIG_MACH_GOFLEXHOME /* Machine type */
30#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
31
32/*
33 * Default GPIO configuration and LED status
34 */
35#define GOFLEXHOME_OE_LOW (~(0))
36#define GOFLEXHOME_OE_HIGH (~(0))
37#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
38#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
39
40/* PHY related */
41#define MV88E1116_LED_FCTRL_REG 10
42#define MV88E1116_CPRSP_CR3_REG 21
43#define MV88E1116_MAC_CTRL_REG 21
44#define MV88E1116_PGADR_REG 22
45#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
46#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
47
48/*
49 * Commands configuration
50 */
51#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
52#define CONFIG_CONSOLE_MUX
53#define CONFIG_SYS_CONSOLE_IS_IN_ENV
54
55#include <config_cmd_default.h>
56#define CONFIG_CMD_DHCP
57#define CONFIG_CMD_ENV
58#define CONFIG_CMD_MII
59#define CONFIG_CMD_NAND
60#define CONFIG_CMD_PING
61#define CONFIG_CMD_USB
62#define CONFIG_CMD_IDE
63#define CONFIG_CMD_DATE
64#define CONFIG_CMD_EXT4
65#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
66
67/*
68 * mv-common.h should be defined after CMD configs since it used them
69 * to enable certain macros
70 */
71#include "mv-common.h"
72
73#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
74#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */
75
76/*
77 * Environment variables configurations
78 */
79#ifdef CONFIG_CMD_NAND
80#define CONFIG_ENV_IS_IN_NAND 1
81#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
82#else
83#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
84#endif
85/*
86 * max 4k env size is enough, but in case of nand
87 * it has to be rounded to sector size
88 */
89#define CONFIG_ENV_SIZE 0x20000 /* 128k */
90#define CONFIG_ENV_ADDR 0xC0000
91#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
92
93/*
94 * Default environment variables
95 */
96#define CONFIG_BOOTCOMMAND \
97 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
98 "ubi part root; " \
99 "ubifsmount ubi:root; " \
100 "ubifsload 0x800000 ${kernel}; " \
101 "bootm 0x800000"
102
103#define CONFIG_MTDPARTS \
104 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
105
106#define CONFIG_EXTRA_ENV_SETTINGS \
107 "console=console=ttyS0,115200\0" \
108 "mtdids=nand0=orion_nand\0" \
109 "mtdparts="CONFIG_MTDPARTS \
110 "kernel=/boot/uImage\0" \
111 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
112
113/*
114 * Ethernet Driver configuration
115 */
116#ifdef CONFIG_CMD_NET
117#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
118#define CONFIG_PHY_BASE_ADR 0
119#endif /* CONFIG_CMD_NET */
120
121/*
122 * * SATA Driver configuration
123 * */
124#ifdef CONFIG_MVSATA_IDE
125#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
126#endif /*CONFIG_MVSATA_IDE*/
127
128/*
129 * * RTC driver configuration
130 * */
131#ifdef CONFIG_CMD_DATE
132#define CONFIG_RTC_MV
133#endif /* CONFIG_CMD_DATE */
134
135#endif /* _CONFIG_GOFLEXHOME_H */