Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / fec546264797022be2d70c441bd2d07fe9045056 / . / board / d-link / dns325 / dns325.c
blob: 8ebfe4c601890307df5cbebd3a9da16a95d5c8ea [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -0400[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]2/*
3 * Copyright (C) 2011
Stefan Herbrechtsmeier16437a12014-12-28 14:09:50 +0100[diff] [blame]4 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]5 *
6 * Based on Kirkwood support:
7 * (C) Copyright 2009
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]10 */
11
12#include <common.h>
Simon Glass691d7192020-05-10 11:40:02 -0600[diff] [blame]13#include <init.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -0600[diff] [blame]14#include <log.h>
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]15#include <miiphy.h>
Simon Glass5e6267a2019-12-28 10:44:48 -0700[diff] [blame]16#include <net.h>
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]17#include <netdev.h>
18#include <asm/arch/cpu.h>
Stefan Roese3dc23f72014-10-22 12:13:06 +0200[diff] [blame]19#include <asm/arch/soc.h>
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]20#include <asm/arch/mpp.h>
21#include <asm/arch/gpio.h>
Simon Glass401d1c42020-10-30 21:38:53 -0600[diff] [blame]22#include <asm/global_data.h>
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]23#include "dns325.h"
24
25DECLARE_GLOBAL_DATA_PTR;
26
27int board_early_init_f(void)
28{
29 /* Gpio configuration */
Stefan Roesed5c51322014-10-22 12:13:11 +0200[diff] [blame]30 mvebu_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
31 DNS325_OE_LOW, DNS325_OE_HIGH);
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]32
33 /* Multi-Purpose Pins Functionality configuration */
Albert ARIBAUD9d86f0c2012-11-26 11:27:36 +0000[diff] [blame]34 static const u32 kwmpp_config[] = {
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]35 MPP0_NF_IO2,
36 MPP1_NF_IO3,
37 MPP2_NF_IO4,
38 MPP3_NF_IO5,
39 MPP4_NF_IO6,
40 MPP5_NF_IO7,
41 MPP6_SYSRST_OUTn,
42 MPP7_GPO,
43 MPP8_TW_SDA,
44 MPP9_TW_SCK,
45 MPP10_UART0_TXD,
46 MPP11_UART0_RXD,
47 MPP12_SD_CLK,
48 MPP13_SD_CMD,
49 MPP14_SD_D0,
50 MPP15_SD_D1,
51 MPP16_SD_D2,
52 MPP17_SD_D3,
53 MPP18_NF_IO0,
54 MPP19_NF_IO1,
55 MPP20_SATA1_ACTn, /* sata1(left) status led */
56 MPP21_SATA0_ACTn, /* sata0(right) status led */
57 MPP22_GPIO,
58 MPP23_GPIO,
59 MPP24_GPIO, /* power off out */
60 MPP25_GPIO,
61 MPP26_GPIO, /* power led */
62 MPP27_GPIO, /* sata0(right) error led */
63 MPP28_GPIO, /* sata1(left) error led */
64 MPP29_GPIO, /* usb error led */
65 MPP30_GPIO,
66 MPP31_GPIO,
67 MPP32_GPIO,
68 MPP33_GPIO,
69 MPP34_GPIO, /* power key */
70 MPP35_GPIO,
71 MPP36_GPIO,
72 MPP37_GPIO,
73 MPP38_GPIO,
74 MPP39_GPIO, /* enable sata 0 */
75 MPP40_GPIO, /* enable sata 1 */
76 MPP41_GPIO, /* hdd0 present */
77 MPP42_GPIO, /* hdd1 present */
78 MPP43_GPIO, /* usb status led */
79 MPP44_GPIO, /* fan status */
80 MPP45_GPIO, /* fan high speed */
81 MPP46_GPIO, /* fan low speed */
82 MPP47_GPIO, /* usb umount */
83 MPP48_GPIO, /* factory reset */
84 MPP49_GPIO, /* thermal sensor */
85 0
86 };
Valentin Longchamp84683632012-06-01 01:31:00 +0000[diff] [blame]87 kirkwood_mpp_conf(kwmpp_config, NULL);
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]88
89 kw_gpio_set_blink(DNS325_GPIO_LED_POWER , 1);
90
91 kw_gpio_set_value(DNS325_GPIO_SATA0_EN , 1);
Stefan Roesefec54622023-08-11 10:02:04 +0200[diff] [blame^]92 kw_gpio_set_value(DNS325_GPIO_SATA1_EN , 1);
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]93 return 0;
94}
95
96int board_init(void)
97{
98 /* Boot parameters address */
Stefan Roese96c5f082014-10-22 12:13:13 +0200[diff] [blame]99 gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
Stefanbfacf462011-12-23 06:35:04 +0000[diff] [blame]100
101 return 0;
102}
103
104#ifdef CONFIG_RESET_PHY_R
105/* Configure and initialize PHY */
106void reset_phy(void)
107{
108 u16 reg;
109 u16 devadr;
110 char *name = "egiga0";
111
112 if (miiphy_set_current_dev(name))
113 return;
114
115 /* command to read PHY dev address */
116 if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
117 printf("Err..(%s) could not read PHY dev address\n", __func__);
118 return;
119 }
120
121 /*
122 * Enable RGMII delay on Tx and Rx for CPU port
123 * Ref: sec 4.7.2 of chip datasheet
124 */
125 miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
126 miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
127 reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
128 miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
129 miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
130
131 /* reset the phy */
132 miiphy_reset(name, devadr);
133
134 debug("88E1116 Initialized on %s\n", name);
135}
136#endif /* CONFIG_RESET_PHY_R */