blob: 486d9ee63c4f8b84caccafa2fb1c70995a5ff9ba [file] [log] [blame]
Andreas Bießmanna420dfe2012-09-04 11:33:29 +00001/*
2 * Copyright (C) 2006 Atmel Corporation
3 *
4 * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com>
5 *
6 * Configuration settings for the AVR32 Network Gateway
7 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02008 * SPDX-License-Identifier: GPL-2.0+
Andreas Bießmanna420dfe2012-09-04 11:33:29 +00009 */
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13#include <asm/arch/hardware.h>
14
Andreas Bießmanna420dfe2012-09-04 11:33:29 +000015#define CONFIG_AT32AP
16#define CONFIG_AT32AP7000
17#define CONFIG_ATNGW100MKII
18
Andreas Bießmanned78b112015-03-01 22:01:13 +010019#define CONFIG_BOARD_EARLY_INIT_F
20#define CONFIG_BOARD_EARLY_INIT_R
21
Andreas Bießmanna420dfe2012-09-04 11:33:29 +000022/*
Andreas Bießmanna420dfe2012-09-04 11:33:29 +000023 * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
24 * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
25 * and the PBA bus to run at 1/4 the PLL frequency.
26 */
27#define CONFIG_PLL
28#define CONFIG_SYS_POWER_MANAGER
29#define CONFIG_SYS_OSC0_HZ 20000000
30#define CONFIG_SYS_PLL0_DIV 1
31#define CONFIG_SYS_PLL0_MUL 7
32#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
33/*
34 * Set the CPU running at:
35 * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
36 */
37#define CONFIG_SYS_CLKDIV_CPU 0
38/*
39 * Set the HSB running at:
40 * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
41 */
42#define CONFIG_SYS_CLKDIV_HSB 1
43/*
44 * Set the PBA running at:
45 * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
46 */
47#define CONFIG_SYS_CLKDIV_PBA 2
48/*
49 * Set the PBB running at:
50 * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
51 */
52#define CONFIG_SYS_CLKDIV_PBB 1
53
54/* Reserve VM regions for NOR flash, NAND flash and SDRAM */
55#define CONFIG_SYS_NR_VM_REGIONS 3
56
57/*
58 * The PLLOPT register controls the PLL like this:
59 * icp = PLLOPT<2>
60 * ivco = PLLOPT<1:0>
61 *
62 * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
63 */
64#define CONFIG_SYS_PLL0_OPT 0x04
65
66#define CONFIG_USART_BASE ATMEL_BASE_USART1
67#define CONFIG_USART_ID 1
68
69/* User serviceable stuff */
70#define CONFIG_DOS_PARTITION
71
72#define CONFIG_CMDLINE_TAG
73#define CONFIG_SETUP_MEMORY_TAGS
74#define CONFIG_INITRD_TAG
75
76#define CONFIG_STACKSIZE (2048)
77
78#define CONFIG_BAUDRATE 115200
79#define CONFIG_BOOTARGS \
80 "root=mtd:main rootfstype=jffs2"
81#define CONFIG_BOOTCOMMAND \
82 "fsload 0x10400000 /uImage; bootm"
83
Andreas Bießmanna420dfe2012-09-04 11:33:29 +000084#define CONFIG_BOOTDELAY 1
Andreas Bießmanna420dfe2012-09-04 11:33:29 +000085
86/*
87 * After booting the board for the first time, new ethernet addresses
88 * should be generated and assigned to the environment variables
89 * "ethaddr" and "eth1addr". This is normally done during production.
90 */
91#define CONFIG_OVERWRITE_ETHADDR_ONCE
Andreas Bießmanna420dfe2012-09-04 11:33:29 +000092
93/*
94 * BOOTP/DHCP options
95 */
96#define CONFIG_BOOTP_SUBNETMASK
97#define CONFIG_BOOTP_GATEWAY
98
99/*
100 * Command line configuration.
101 */
Andreas Bießmanna420dfe2012-09-04 11:33:29 +0000102#define CONFIG_CMD_ASKENV
103#define CONFIG_CMD_DHCP
104#define CONFIG_CMD_EXT2
105#define CONFIG_CMD_FAT
106#define CONFIG_CMD_JFFS2
107#define CONFIG_CMD_MMC
108#define CONFIG_CMD_SF
109#define CONFIG_CMD_SPI
110#define CONFIG_CMD_MII
111
Andreas Bießmanna420dfe2012-09-04 11:33:29 +0000112
113#define CONFIG_ATMEL_USART
114#define CONFIG_MACB
115#define CONFIG_PORTMUX_PIO
116#define CONFIG_SYS_NR_PIOS 5
117#define CONFIG_SYS_HSDRAMC
118#define CONFIG_MMC
119#define CONFIG_GENERIC_ATMEL_MCI
120#define CONFIG_GENERIC_MMC
Andreas Bießmanna420dfe2012-09-04 11:33:29 +0000121#define CONFIG_ATMEL_SPI
122
Andreas Bießmanna420dfe2012-09-04 11:33:29 +0000123#define CONFIG_SPI_FLASH_ATMEL
124
125#define CONFIG_SYS_DCACHE_LINESZ 32
126#define CONFIG_SYS_ICACHE_LINESZ 32
127
128#define CONFIG_NR_DRAM_BANKS 1
129
130#define CONFIG_SYS_FLASH_CFI
131#define CONFIG_FLASH_CFI_DRIVER
132#define CONFIG_SYS_FLASH_PROTECTION
133
134#define CONFIG_SYS_FLASH_BASE 0x00000000
135#define CONFIG_SYS_FLASH_SIZE 0x800000
136#define CONFIG_SYS_MAX_FLASH_BANKS 1
137#define CONFIG_SYS_MAX_FLASH_SECT 135
138
139#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
Andreas Bießmann024cd742014-05-16 12:17:41 +0200140#define CONFIG_SYS_TEXT_BASE 0x00000000
Andreas Bießmanna420dfe2012-09-04 11:33:29 +0000141
142#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
143#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
144#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
145
146#define CONFIG_ENV_IS_IN_FLASH
147#define CONFIG_ENV_SIZE 65536
148#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
149
150#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
151
152#define CONFIG_SYS_MALLOC_LEN (256*1024)
Andreas Bießmanna420dfe2012-09-04 11:33:29 +0000153
154/* Allow 4MB for the kernel run-time image */
155#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
156#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
157
158/* Other configuration settings that shouldn't have to change all that often */
159#define CONFIG_SYS_PROMPT "U-Boot> "
160#define CONFIG_SYS_CBSIZE 256
161#define CONFIG_SYS_MAXARGS 16
162#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
163#define CONFIG_SYS_LONGHELP
164
165#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
166#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)
167
168#define CONFIG_MTD_DEVICE
169#define CONFIG_MTD_PARTITIONS
170
171#endif /* __CONFIG_H */