- ad8d48e arm64: zynqmp: Record ID code for XCZU1EG device by Michal Simek · 2 years, 8 months ago
- 0302a20 arm64: zynqmp: Remove low level UART setting cont by Michal Simek · 2 years, 8 months ago
- f66d0b5 arm64: versal: Do not place u-boot to reserved memory location by Michal Simek · 2 years, 8 months ago
- 9fb9ec5 arm64: zynqmp: add support for zcu106 rev1.0 by Neal Frager · 2 years, 9 months ago
- d7b5cc8 microblaze: Do not place u-boot to reserved memory location by Michal Simek · 2 years, 9 months ago
- 2569b51 Revert "board: zynqmp: Fix for wrong AMS setting by ROM" by T Karthik Reddy · 2 years, 9 months ago
- 7a036b6 fru: ops: Add support to read mac addresses from multirecord by Ashok Reddy Soma · 2 years, 9 months ago
- ff8ee70 xilinx: common: Optimise updating ethaddr from eeprom by Ashok Reddy Soma · 2 years, 9 months ago
- 90e8f2d fru: ops: Return error from checksum if data is all zero's by Ashok Reddy Soma · 2 years, 9 months ago
- 952b2e6 fru: ops: Clear fru table before storing data by Ashok Reddy Soma · 2 years, 9 months ago
- 11381fb arm64: zynqmp: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 05f0f26 ARM: zynq: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 83d2941 arm64: zynqmp: Fix dependencies around ZYNQMP_PSU_INIT_ENABLED by Michal Simek · 2 years, 9 months ago
- f063100 xilinx: Enable OF_BOARD for zynq and zynqmp boards by Michal Simek · 2 years, 9 months ago
- 1669b3d microblaze: exception: migrate MICROBLAZE_V5 to Kconfig by Ovidiu Panait · 2 years, 9 months ago
- fac46bc arm64: zynqmp: Add command for disabling loading other overlays by Michal Simek · 2 years, 10 months ago
- 25a91f3 arm64: zynqmp: Print the secure boot status information by Jorge Ramirez-Ortiz · 3 years, 1 month ago
- e6e3b9d xilinx: common: change bootm_size to not go beyond ram_top by Ricardo Salveti · 2 years, 10 months ago
- bf97c46 versal: Return ENVL_NOWHERE instead of ENVL_UNKNOWN by T Karthik Reddy · 3 years ago
- bb113ce xilinx: Kconfig: add XILINX_OF_BOARD_DTB_ADDR default value for microblaze by Ovidiu Panait · 3 years ago
- b6aef10 microblaze: add Kconfig symbol for the vector base address by Ovidiu Panait · 3 years ago
- 83b175b microblaze: migrate CONFIG_SYS_USR_EXCEP to Kconfig by Ovidiu Panait · 3 years ago
- 380bd08 xilinx: firmware: Move dcache handling directly to pmufw load config by Michal Simek · 3 years ago
- 67bf888 arm64: zynqmp: Switch SOM to shared psu configuration by Michal Simek · 3 years ago
- 5f4e1ff xilinx: versal: Fix sdhci node name as per DT by T Karthik Reddy · 3 years ago
- 2ffa0e8 Merge tag 'xilinx-for-v2022.01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 3 years ago
- 11c0255 xilinx: zynqmp: fix ZYNQMP_RESTORE_JTAG check by Ricardo Salveti · 3 years ago
- 412ab13 arm64: zynqmp: Replace comma by semicolon by Michal Simek · 3 years, 1 month ago
- e8b43c6 xilinx: zynqmp: Save multiboot as variable by Michal Simek · 3 years, 1 month ago
- e7fb789 sandbox: Remove OF_HOSTFILE by Ilias Apalodimas · 3 years, 1 month ago
- 6070588 xilinx: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME by Michal Simek · 3 years, 1 month ago
- f510927 xilinx: zynqmp: Handle fallthrough statement properly by Michal Simek · 3 years, 1 month ago
- d2d1438 arm64: zynqmp: Add support for DLC21 (Smartlynq+) board by Michal Simek · 3 years, 1 month ago
- 398a74a zynqmp: restore the jtag interface by Jorge Ramirez-Ortiz · 3 years, 1 month ago
- 8bef036 Merge tag 'xilinx-for-v2022.01-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 3 years, 1 month ago
- c72231d WS cleanup: remove excessive empty lines by Wolfgang Denk · 3 years, 2 months ago
- 66356b4 WS cleanup: remove trailing empty lines by Wolfgang Denk · 3 years, 2 months ago
- 0285d75 arm64: zynqmp: Add psu_init_gpl for vck190/vmk180 SC by Michal Simek · 3 years, 2 months ago
- 5d498a1 xilinx: zynqmp: Set modeboot env variable in eMMC bootmode by Ashok Reddy Soma · 3 years, 2 months ago
- c67fecd ARM: zynq: Enable capsule update for qspi and mmc by Michal Simek · 3 years, 3 months ago
- 52ff162 xilinx: common: Enabling generic function for DT reselection by Michal Simek · 3 years, 3 months ago
- 5bd5ee0 xilinx: zynqmp: Check that DT is 64bit aligned by Michal Simek · 3 years, 3 months ago
- 8823253 xilinx: Add support for generic board detection by Michal Simek · 3 years, 4 months ago
- b262863 xilinx: common: Free allocated structure by Michal Simek · 3 years, 3 months ago
- d9c93c9 xilinx: common: Change board_info[] handling by Michal Simek · 3 years, 3 months ago
- 57f7103 xilinx: Use variable for passing board_name by Michal Simek · 3 years, 4 months ago
- 530560b xilinx: fru: Replace spaces with \0 in detected name by Michal Simek · 3 years, 3 months ago
- afb08a8 xilinx: zynqmp: Add debug messages for boot mode by Michal Simek · 3 years, 4 months ago
- 80c0d38 xilinx: common: Add function to print SoC info by T Karthik Reddy · 3 years, 3 months ago
- 655d69f mmc: zynq_sdhci: Move setting tapdelay code to driver by Ashok Reddy Soma · 3 years, 3 months ago
- d044982 mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelays by Ashok Reddy Soma · 3 years, 3 months ago
- b86f43d xilinx: zynqmp: Add support for runtime dfu_alt_info setup by Michal Simek · 3 years, 4 months ago
- 3d23843 xilinx: zynqmp: use zynqmp_mmio_read() in multi_boot() by Michal Simek · 3 years, 4 months ago
- e49f2a7 xilinx: zynqmp: Change multi_boot() to return value by Michal Simek · 3 years, 4 months ago
- f83cfaa xilinx: zynqmp: Free allocated field for target variable by Michal Simek · 3 years, 4 months ago
- 7e5f460 global: Convert simple_strtoul() with hex to hextoul() by Simon Glass · 3 years, 4 months ago
- f1bc214 arm64: zynqmp: Do not define do_reset() if sysreset is enabled by Michal Simek · 3 years, 4 months ago
- 50918d0 xilinx: Return ENVL_NOWHERE instead of ENVL_UNKNOWN by Mike Looijmans · 3 years, 4 months ago
- a70bdaf mmc: zynq_sdhci: Split set_tapdelay function to in and out by Ashok Reddy Soma · 3 years, 4 months ago
- 4557627 xilinx: zynqmp: Add support for 67dr silicon by T Karthik Reddy · 3 years, 6 months ago
- ce39ee2 zynqmp: Do not place u-boot to reserved memory location by Michal Simek · 3 years, 6 months ago
- 476588c arm64: zynqmp: Handle MMC seq number based on boot device by Michal Simek · 3 years, 6 months ago
- 02ac155 arm64: zynqmp: Add psu_init_gpl for k26 boards by Michal Simek · 3 years, 6 months ago
- ddf8dea arm64: zynqmp: Add support for SVD devices by Michal Simek · 4 years, 1 month ago
- 3414712 arm64: zynqmp: Writing correct value to ANALOG_BUS by Adrian Fiergolski · 3 years, 5 months ago
- 236f2ec treewide: Convert macro and uses of __section(foo) to __section("foo") by Marek Behún · 3 years, 6 months ago
- 25484d9 xilinx: common: Fix boot script address by T Karthik Reddy · 3 years, 7 months ago
- 82cb49d xilinx: versal: Add usb dfu/thor distro boot support by T Karthik Reddy · 3 years, 8 months ago
- ef1be3e xilinx: zynqmp: Add usb dfu/thor distro boot support by T Karthik Reddy · 3 years, 8 months ago
- 4fb83c9 xilinx: versal: Add support for saving env based on bootmode by Ashok Reddy Soma · 3 years, 9 months ago
- cd08513 xilinx: zynq: Add support for saving env based on bootmode by Ashok Reddy Soma · 3 years, 9 months ago
- db8b461 Merge tag 'xilinx-for-v2021.07' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 3 years, 8 months ago
- cde1aae arm64: zynqmp: Update psu_init for zcu1275 by Michal Simek · 3 years, 9 months ago
- 7a50093 arm64: zynqmp: Add missing psu inits for zcu208/216 by Michal Simek · 3 years, 9 months ago
- 35b65dd reset: Remove addr parameter from reset_cpu() by Harald Seiler · 4 years ago
- a3bbd0b Correct U-Boot upstream repository by Heinrich Schuchardt · 3 years, 9 months ago
- cbe607b Merge tag 'xilinx-for-v2021.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 3 years, 9 months ago
- 3600d47 arm64: zynqmp: Rename zc1275/zcu1275 to be aligned with DT name by Michal Simek · 3 years, 9 months ago
- 3aba25b arm64: zynqmp: Do not clear reset reason by Michal Simek · 3 years, 9 months ago
- 98757d8 xilinx: Show silicon version in SPL by Michal Simek · 3 years, 9 months ago
- fc3c6fd xilinx: common: Fix CONFIG_XILINX_OF_BOARD_DTB_ADDR handling for ZynqMP by Michal Simek · 3 years, 9 months ago
- 401d1c4 common: Drop asm/global_data.h from common header by Simon Glass · 4 years ago
- a672b98 xilinx: common: Do not touch CONFIG_XILINX_OF_BOARD_DTB_ADDR in SPL by Michal Simek · 3 years, 10 months ago
- 506009f xilinx: common: Change macro handling in board_fdt_blob_setup() by Michal Simek · 3 years, 10 months ago
- 2784bef xilinx: zynqmp: Save bootseq number for SD/EMMC boot modes by Michal Simek · 3 years, 10 months ago
- bc0b99b Merge tag 'xilinx-for-v2021.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 3 years, 10 months ago
- 0109db1 xilinx: Fill git repository for Xilinx boards by Michal Simek · 3 years, 10 months ago
- b6d14c5 fru: ops: avoid out of bounds access by Heinrich Schuchardt · 3 years, 10 months ago
- 5766429 microblaze: Set script_offset_nor env variable by T Karthik Reddy · 4 years ago
- 8b85dfc dm: Avoid accessing seq directly by Simon Glass · 4 years ago
- cd40b82 fru: common: Record pcie/uuid fields in custom board area by Michal Simek · 4 years ago
- b8771d0 fru: ops: Do not let parser to write data to not allocated space by Michal Simek · 4 years ago
- 5fb093f fru: common: Switch capture variable with the rest by Michal Simek · 4 years ago
- 6c5828d microblaze: Get rid of xparameters.h by Michal Simek · 4 years ago
- 05af483 xilinx: Consolidate board_fit_config_name_match() for Xilinx platforms by Michal Simek · 4 years, 1 month ago
- 728d21b mmc: zynq_sdhci: Add common function to set input/output tapdelays by Ashok Reddy Soma · 4 years, 1 month ago
- 17a42ab mmc: Define timing macro's by Ashok Reddy Soma · 4 years, 1 month ago
- 1230582 microblaze: Wire generic xilinx board_late_init_xilinx() by Michal Simek · 4 years, 1 month ago
- 92dc921 xilinx: Merge together BOOT_SCRIPT_OFFSET between MB and ARM by Michal Simek · 4 years, 1 month ago
- d388ced xilinx: Add DDR base address to bootscript address by T Karthik Reddy · 4 years, 8 months ago