1. 6d65649 board: ge: bx50v3: Enable hardware watchdog by Martyn Welch · 7 years ago
  2. 2850645 board: ge: bx50v3: program MAC address to I210 by Hannu Lounento · 7 years ago
  3. cf678b3 board: ge: bx50v3: move FEC MAC address programming to driver by Martyn Welch · 7 years ago
  4. 3414913 configs: Add network device support for bx50v3 products by Ian Ray · 7 years ago
  5. 87da89e board: ge: Enable access to i2c bus 1 and 2 by Martyn Welch · 7 years ago
  6. 958a210 rtc: adding RX8010SJ rtc driver by Nandor Han · 7 years ago
  7. 8d9bde0 net: e1000: implement eth_write_hwaddr by Hannu Lounento · 7 years ago
  8. e0a75fe net: e1000: split e1000_read_mac_addr by Hannu Lounento · 7 years ago
  9. f1bcad2 net: e1000: add support for writing to EEPROM by Hannu Lounento · 7 years ago
  10. a61b65f imx: mx8m: add ddr controller memory map by Peng Fan · 7 years ago
  11. a35332f power: pmic/regulator allow dm be omitted by SPL by Peng Fan · 7 years ago
  12. 52df705 imx: imx8mq: add dtsi file by Peng Fan · 7 years ago
  13. f24e482 net: fec: fix build warnings for 64bits support by Ye Li · 7 years ago
  14. 238a53c net: fec: do not access reserved register for i.MX8M by Peng Fan · 7 years ago
  15. 8953d86 gpio: mxc: add i.MX8M support by Peng Fan · 7 years ago
  16. 3baa9ec imx: lcdif: include i.MX8M by Peng Fan · 7 years ago
  17. eec2d43 mmc: fsl_esdhc: support i.MX8M by Peng Fan · 7 years ago
  18. 8a099b6 misc: ocotp: add i.MX8M support by Peng Fan · 7 years ago
  19. e0e4e53 imx: makefile: compile files for i.MX8M by Peng Fan · 7 years ago
  20. fcdbde7 imx: mx8m: add soc related settings and files by Peng Fan · 7 years ago
  21. c1ef486 imx: mx7: move mmc env code to mmc_env.c by Peng Fan · 7 years ago
  22. 80ebf86 imx: cpu: support get_boot_device for i.MX8M by Peng Fan · 7 years ago
  23. 770611f imx: mx7: move get_boot_device to cpu.c by Peng Fan · 7 years ago
  24. ecd7ab5 imx: bootaux: support i.MX8M by Peng Fan · 7 years ago
  25. 8cf2231 imx: cleanup bootaux by Peng Fan · 7 years ago
  26. 6ce8b10 imx: refactor imx_get_mac_from_fuse by Peng Fan · 7 years ago
  27. e56d9d7 imx: cpu: add cpu speed/grade for i.MX8M by Peng Fan · 7 years ago
  28. 423e84b imx: cpu: move speed/temp to common cpu by Peng Fan · 7 years ago
  29. 995e9fe imx: add pad settings bit definition for i.MX8M by Peng Fan · 7 years ago
  30. 4fdffb9 imx: add i.MX8MQ SoC Revision and is_mx8m helper by Peng Fan · 7 years ago
  31. d7cb10a imx: spl: implement spl_boot_device for i.MX8M by Peng Fan · 7 years ago
  32. 7537e93 imx: cpu: update cpu file to support i.MX8M by Peng Fan · 7 years ago
  33. 912d97b imx: boot_mode: add USB_BOOT entry by Peng Fan · 7 years ago
  34. de27466 imx: add sip function by Peng Fan · 7 years ago
  35. bb0fabe imx: mx8m: add clock driver by Peng Fan · 7 years ago
  36. 80fd219 imx: mx8m: add pin header file by Peng Fan · 7 years ago
  37. 3e4aeeb imx: mx8m: add register definition header file by Peng Fan · 7 years ago
  38. 7a7391f imx: add i.MX8M into Kconfig by Peng Fan · 7 years ago
  39. b9d984e configs: icore: enable nand on mmc defconfig by Jagan Teki · 7 years ago
  40. c282eae configs: enable spl support wrt env device by Jagan Teki · 7 years ago
  41. 4f0cd03 imx: mx7: psci: add system power off support by Anson Huang · 7 years ago
  42. 169c20e imx: mx7: psci: add system reset support by Anson Huang · 7 years ago
  43. 0ec3d98 mx7_common: use psci 1.0 instead of 0.1 by Anson Huang · 7 years ago
  44. 04c28a7 board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit by Jagan Teki · 7 years ago
  45. b215307 Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget entries by Lukasz Majewski · 7 years ago
  46. e4d4604 usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command by Lukasz Majewski · 7 years ago
  47. 4f60e5d Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig by Lukasz Majewski · 7 years ago
  48. c6c1ca1 Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig by Lukasz Majewski · 7 years ago
  49. b769659 Kconfig: usb: Sort USB_FUNCTION_* entries by Lukasz Majewski · 7 years ago
  50. 8071993 env: sf: use env_import_redund to simplify env_sf_load by Simon Goldschmidt · 7 years ago
  51. 2166ebf env: make env drivers propagate env_import return value by Simon Goldschmidt · 7 years ago
  52. 31f044b env: move more common code to env_import_redund by Simon Goldschmidt · 7 years ago
  53. 42a1820 env: make env_import(_redund) return 0 on success, not 1 by Simon Goldschmidt · 7 years ago
  54. 87c7fb3 cmd: nvedit: env_get_f must check for env_get_char error codes by Simon Goldschmidt · 7 years ago
  55. 48f58a5 Merge git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 7 years ago
  56. 2e87980 davinci: Fix omapl138_lcdk builds by Tom Rini · 7 years ago
  57. ab21ece Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblaze by Tom Rini · 7 years ago
  58. 11d2e98 Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig by Adam Ford · 7 years ago
  59. 76e2222 Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig by Adam Ford · 7 years ago
  60. 405fc83 Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig by Derald D. Woods · 7 years ago
  61. 58932ec armv8: ls2088ardb: Add 3DS RDIMM support by York Sun · 7 years ago
  62. f513de6 armv8: ls1046ardb: Add RDIMM support by York Sun · 7 years ago
  63. 140ad2d drivers/ddr/fsl: Cleanup unused variable by York Sun · 7 years ago
  64. 944537c drivers/ddr/fsl: Modify binding registers to save time on data init by York Sun · 7 years ago
  65. 564e938 drivers/ddr/fsl: Add calculation of register control words by York Sun · 7 years ago
  66. c0c32af drivers/ddr/fsl: Add 3DS RDIMM support by York Sun · 7 years ago
  67. d46ec0b drivers/ddr/fsl: Fix workaround for A009803 by York Sun · 7 years ago
  68. 426230a drivers/ddr/fsl: Fix DDR4 RDIMM support by York Sun · 7 years ago
  69. a9b1c21 armv8: ls1088a: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs by Ashish Kumar · 7 years ago
  70. f9747a5 driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl by Yogesh Gaur · 7 years ago
  71. f1554b2 Merge git://git.denx.de/u-boot-x86 by Tom Rini · 7 years ago
  72. e21b04f x86: kconfig: Remove meaningless 'select n' by Ulf Magnusson · 7 years ago
  73. d0c0752 x86: quark: Fix unused warnings by Tom Rini · 7 years ago
  74. ca92ad4 cmd/bdinfo: print relocation info on X86 by Heinrich Schuchardt · 7 years ago
  75. 2d1c661 x86: qemu: qfw: Implement acpi_get_rsdp_addr() by Bin Meng · 7 years ago
  76. 45410da x86: acpi: Use an API to get the ACPI RSDP table address by Bin Meng · 7 years ago
  77. e7563c2 arm64: zynqmp: Fix misspelled choice default by Ulf Magnusson · 7 years ago
  78. aae7422 arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfig by Vipul Kumar · 7 years ago
  79. bd5a8e5 microblaze: Moved ethernet PHY configs of Microblaze board to defconfig by Vipul Kumar · 7 years ago
  80. 77217c4 arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig by Vipul Kumar · 7 years ago
  81. c239f49 arm: zynq: Remove ethernet alias for topic-miami by Michal Simek · 7 years ago
  82. d78b4ae arm: zynq: Mark cc108 uart to be initialized before relocation by Michal Simek · 7 years ago
  83. 3e1b61d arm: zynq: Update years in copyright to reflect latest changes by Michal Simek · 7 years ago
  84. 6c45abe arm64: zynqmp: Add psu_init for zcu102-rev1.0 by Michal Simek · 7 years ago
  85. 2ad341e arm64: zynqmp: Prepare psu_init rework by Michal Simek · 7 years ago
  86. 88f05a9 arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLED by Michal Simek · 7 years ago
  87. 9753c4f arm64: zynqmp: Remove unused empty functions by Michal Simek · 7 years ago
  88. d55c815 nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT by Ezequiel Garcia · 7 years ago
  89. f25ac66 nand: arasan_nfc: Use the calculated ecc address for updating ecc register by Siva Durga Prasad Paladugu · 7 years ago
  90. cacb8a0 nand: arasan_nfc: Add support for ondie ecc by Siva Durga Prasad Paladugu · 7 years ago
  91. b08fc34 nand: arasan_nfc: Move common ecc struct initialization init routine by Siva Durga Prasad Paladugu · 7 years ago
  92. 2678059 xilinx: zynqmp: Add new target with only emmc enabled by Siva Durga Prasad Paladugu · 7 years ago
  93. c8a6bad xilinx: zynqmp: Add new target with only nand enabled by Siva Durga Prasad Paladugu · 7 years ago
  94. 3b644a3 arm64: zynqmp: Provide a config to not map DDR region in MMU table by Siva Durga Prasad Paladugu · 7 years ago
  95. f32e79f arm64: zynqmp: Propagate error value from psu_init() by Michal Simek · 7 years ago
  96. 7109930 arm64: zynqmp: Remove whitespaces in psu_init() comment by Michal Simek · 7 years ago
  97. 427d568 arm: zynq: Fix pmu register description coding style by Michal Simek · 8 years ago
  98. a587051 arm: zynq: Enable distro defaults setting by Michal Simek · 7 years ago
  99. 83144cd arm: zynq: Move bootcommand to defconfig by Michal Simek · 7 years ago
  100. 93561a3 arm: zynq: Enable DM_GPIO when needed by Michal Simek · 7 years ago