- 82e26e0 spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_... by Simon Glass · 1 year, 2 months ago
- be2abe7 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv by Tom Rini · 1 year, 1 month ago
- cb59d23 Merge branch '2023-10-04-TI-dts-updates' by Tom Rini · 1 year, 1 month ago
- 25453dc Merge tag 'dm-pull-4oct23' of https://source.denx.de/u-boot/custodians/u-boot-dm by Tom Rini · 1 year, 1 month ago
- 69b19ca arm: dts: k3-j721e: Sync with v6.6-rc1 by Neha Malcom Francis · 1 year, 2 months ago
- d73851b arm: dts: k3-j721e-r5: Clean up inclusion hierarchy by Neha Malcom Francis · 1 year, 2 months ago
- 5b26715 configs: j721e: Remove HBMC_AM654 config by Neha Malcom Francis · 1 year, 2 months ago
- a9c2b73 drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up by Neha Malcom Francis · 1 year, 2 months ago
- 50fa67d arm: mach-k3: j721e_init: Move clk_k3 probe before loading TIFS by Neha Malcom Francis · 1 year, 2 months ago
- dd0169f arm: mach-k3: j721e: dev-data: Add mcu_timer0 ID by Neha Malcom Francis · 1 year, 2 months ago
- 0cb6515 arm: dts: k3-am625-beagleplay: Fix Boot by Nishanth Menon · 1 year, 1 month ago
- 6d35682 arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase by Roger Quadros · 1 year, 1 month ago
- 7e5b6f1 arm: dts: k3-am625-sk: Fix boot by Roger Quadros · 1 year, 1 month ago
- 2f35889 arm: dts: k3-am642-sk: Mark dependent nodes for pre-relocation phase by Roger Quadros · 1 year, 1 month ago
- f3285de arm: dts: k3-am642-sk: Fix boot by Roger Quadros · 1 year, 1 month ago
- 398bd29 arm: dts: k3-am64-evm: Mark dependent nodes for pre-relocation phase by Roger Quadros · 1 year, 1 month ago
- c043ba9 arm: dts: k3-am64-evm: Fix boot by Roger Quadros · 1 year, 1 month ago
- 4840b71 qconfig: Update the documentation by Simon Glass · 1 year, 2 months ago
- 5196379 qconfig: Rename the database file by Simon Glass · 1 year, 2 months ago
- ea4d6de moveconfig: Rename the tool to qconfig by Simon Glass · 1 year, 2 months ago
- 94e2ed7 moveconfig: Move summaries to the end by Simon Glass · 1 year, 2 months ago
- fc07d99 moveconfig: Drop the initial output by Simon Glass · 1 year, 2 months ago
- dc1d2e6 moveconfig: Show a summary at the end by Simon Glass · 1 year, 2 months ago
- 6b25d21 moveconfig: Show failures in progress by Simon Glass · 1 year, 2 months ago
- 15f19ab moveconfig: Use u_boot_pylib for terminal colour by Simon Glass · 1 year, 2 months ago
- 95f0914 moveconfig: Avoid showing progress at the end by Simon Glass · 1 year, 2 months ago
- 9461bf0 moveconfig: Reduce the amount of output by Simon Glass · 1 year, 2 months ago
- 5aba58c moveconfig: Only show output when there is a reason by Simon Glass · 1 year, 2 months ago
- f297ba3 moveconfig: Fix misc pylint warnings by Simon Glass · 1 year, 2 months ago
- e6c686f moveconfig: Use an encoding with open() by Simon Glass · 1 year, 2 months ago
- b774ba5 moveconfig: Correct list-comprehension warnings by Simon Glass · 1 year, 2 months ago
- a6ab4db moveconfig: Correct use of members not declared in __init__() by Simon Glass · 1 year, 2 months ago
- a4c9d17 moveconfig: Correct non-snake variables names by Simon Glass · 1 year, 2 months ago
- 62fae4b moveconfig: Correct unused variables by Simon Glass · 1 year, 2 months ago
- 1bd4306 moveconfig: Use f strings where possible by Simon Glass · 1 year, 2 months ago
- 549d422 moveconfig: Correct parameter-type warnings by Simon Glass · 1 year, 2 months ago
- 9827571 moveconfig: Correct some regular-expression strings by Simon Glass · 1 year, 2 months ago
- 0313742 moveconfig: Drop suspicious boards by Simon Glass · 1 year, 2 months ago
- c734561 moveconfig: Drop check_defconfig() and update_dotconfig() by Simon Glass · 1 year, 2 months ago
- 882c8e4 moveconfig: Drop CONFIG-moving code by Simon Glass · 1 year, 2 months ago
- 3481e89 moveconfig: Drop unused cleanup options by Simon Glass · 1 year, 2 months ago
- b5aa5a3 moveconfig: Correct ordering of asteval import by Simon Glass · 1 year, 2 months ago
- ad1f187 moveconfig: Avoid deprecation warning for setDaemon by Simon Glass · 1 year, 2 months ago
- 63df202 moveconfig: Drop -H option by Simon Glass · 1 year, 2 months ago
- a535a37 dm: core: Adjust dump-sorting to get stats only when needed by Simon Glass · 1 year, 2 months ago
- b83e285 Merge tag 'u-boot-stm32-20231004' of https://source.denx.de/u-boot/custodians/u-boot-stm by Tom Rini · 1 year, 1 month ago
- 6d91f0a board: st: common: cleanup dfu support by Patrick Delaunay · 1 year, 2 months ago
- 9cf125b configs: stm32mp13: add support of usb boot by Patrick Delaunay · 1 year, 2 months ago
- 3ac6cae configs: stm32mp13: activate command stm32prog by Patrick Delaunay · 1 year, 2 months ago
- e64e733 configs: stm32mp13: Enable USB related flags by Patrice Chotard · 1 year, 2 months ago
- 46b4d6f ARM: dts: stm32: force b-session-valid for otg on stm32mp135f-dk board by Fabrice Gasnier · 1 year, 2 months ago
- f959118 ARM: dts: stm32mp: alignment with v6.6-rc1 by Patrice Chotard · 1 year, 2 months ago
- dbfe77a ARM: stm32: Add dh_update_sd_to_emmc to STM32MP15xx DHCOR by Marek Vasut · 1 year, 1 month ago
- 2ea4f97 ARM: stm32: Rename update_sf to dh_update_sd_to_sf on STM32MP15xx DHCOR by Marek Vasut · 1 year, 1 month ago
- 062ee99 clk: stm32mp1: Add support for USART1 clock by Anatolij Gustschin · 1 year, 1 month ago
- 07cdd22 board: dh_stm32mp1: Only print board code with CONFIG_SPL_DISPLAY_PRINT by Harald Seiler · 1 year, 2 months ago
- 719a875 ram: stm32mp1: Only print RAM config with CONFIG_SPL_DISPLAY_PRINT by Harald Seiler · 1 year, 2 months ago
- 1937fdb ARM: dts: stm32: add RNG node for STM32MP13x platforms by Gatien Chevallier · 1 year, 2 months ago
- e077d7f rng: stm32: Implement custom RNG configuration support by Gatien Chevallier · 1 year, 2 months ago
- 6032292 rng: stm32: add error concealment sequence by Gatien Chevallier · 1 year, 2 months ago
- 01af363 rng: stm32: add RNG clock frequency restraint by Gatien Chevallier · 1 year, 2 months ago
- 2d2574b rng: stm32: Implement configurable RNG clock error detection by Gatien Chevallier · 1 year, 2 months ago
- 81a751d configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms by Gatien Chevallier · 1 year, 2 months ago
- 77e0c60 rng: stm32: rename STM32 RNG driver by Gatien Chevallier · 1 year, 2 months ago
- 388f872 ARM: dts: stm32f429: put can2 in secondary mode by Dario Binacchi · 1 year, 2 months ago
- 3fd60a4 ARM: dts: stm32: add pin map for CAN controller on stm32f4 by Dario Binacchi · 1 year, 2 months ago
- 78692e5 ARM: dts: stm32: add CAN support on stm32f429 by Dario Binacchi · 1 year, 2 months ago
- 7132729 configs: stm32f769-disco: Enable VIDEO_LOGO flag by Patrice Chotard · 1 year, 3 months ago
- 36ce1d5 Remove the hardcoded ST logo no longer in use by Dario Binacchi · 1 year, 3 months ago
- 9192b13 board: stm32f746-disco: refactor the display of the ST logo by Dario Binacchi · 1 year, 3 months ago
- 20af6b8 configs: stm32f746-disco: limit resolution to 480x272 by Dario Binacchi · 1 year, 3 months ago
- 1e4d995 ARM: dts: stm32: support display on stm32f746-disco board by Dario Binacchi · 1 year, 2 months ago
- f0c76e7 ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco by Dario Binacchi · 1 year, 2 months ago
- 92ddff6 ARM: dts: stm32: add pin map for LTDC on stm32f7 by Dario Binacchi · 1 year, 2 months ago
- f479f5d ARM: dts: stm32: add ltdc support on stm32f746 MCU by Dario Binacchi · 1 year, 2 months ago
- 5b9e395 ARM: dts: stm32: add touchscreen on stm32f746-disco board by Dario Binacchi · 1 year, 2 months ago
- f37cf07 ARM: dts: stm32: add pin map for i2c3 controller on stm32f7 by Dario Binacchi · 1 year, 2 months ago
- 3175c73 ARM: dts: stm32: use RCC macro for CRC node on stm32f746 by Dario Binacchi · 1 year, 2 months ago
- a5fc0be ARM: dts: stm32: add CAN support on stm32f746 by Dario Binacchi · 1 year, 2 months ago
- 3d82c74 ARM: dts: stm32: add pin map for CAN controller on stm32f7 by Dario Binacchi · 1 year, 2 months ago
- e97aeda dt-bindings: mfd: stm32f7: Add binding definition for CAN3 by Dario Binacchi · 1 year, 2 months ago
- 7cfdacb configs: sifive: enable poweroff command on Unmatched by Heinrich Schuchardt · 1 year, 1 month ago
- 8a0d5f2 riscv: andesv5: Prefer using the generic RISC-V timer driver in S-mode by Yu Chien Peter Lin · 1 year, 1 month ago
- 5f25297 configs: andes: rearrange SPL mode memory layout by Randolph · 1 year, 2 months ago
- b68bf22 configs: andes: add vender prefix for target name by Randolph · 1 year, 2 months ago
- e637e45 riscv: enable CONFIG_DEBUG_UART by default by Heinrich Schuchardt · 1 year, 2 months ago
- ef5ccaa cmd/exception: test RISC-V 16 bit aligned instruction by Heinrich Schuchardt · 1 year, 2 months ago
- f2e4b9d cmd/exception: support RISC-V compressed instruction by Heinrich Schuchardt · 1 year, 2 months ago
- c202426 timer: starfive: Add Starfive timer support by Kuan Lim Lee · 1 year, 2 months ago
- 6d78473 timer: riscv_aclint_timer: add timer_get_boot_us for BOOTSTAGE by Chanho Park · 1 year, 2 months ago
- 74fbd74 riscv: timer: add timer_get_boot_us for BOOTSTAGE by Chanho Park · 1 year, 2 months ago
- 9bcf9e4 riscv: bootstage: correct bootstage_report guard by Chanho Park · 1 year, 2 months ago
- 65b9b34 Merge branch 'next_pinctrl_sync' of https://source.denx.de/u-boot/custodians/u-boot-sh by Tom Rini · 1 year, 1 month ago
- ec6f06b configs: Resync with savedefconfig by Tom Rini · 1 year, 1 month ago
- ac89738 Merge branch 'next' by Tom Rini · 1 year, 1 month ago
- 4459ed6 Prepare v2023.10 by Tom Rini · 1 year, 1 month ago
- ba6d575 configs: Resync with savedefconfig by Tom Rini · 1 year, 1 month ago
- e29b932 Merge branch '2023-09-30-Kconfig-updates' into next by Tom Rini · 1 year, 1 month ago
- 613949b Merge branch '2023-09-30-assorted-build-related-changes' into next by Tom Rini · 1 year, 1 month ago
- 30c210b ARM: renesas: Align env eMMC device number with Linux 6.5.3 DT changes on R-Car Gen3 Salvator-X by Marek Vasut · 1 year, 2 months ago