Gitiles
Code Review
Sign In
gerrit.devboardsforandroid.linaro.org
/
platform
/
external
/
u-boot
/
a37c36f4e70bada297f281b0e542539ad43e50f6
« Previous
8b33abde
Blackfin: drop old u-boot.lds clean target
by Mike Frysinger
· 14 years ago
37aac2d
Blackfin: bf527-ad7160-eval: new board support
by Michael Hennerich
· 14 years ago
8278b87
Blackfin: enable IP defrag for ADI boards
by Mike Frysinger
· 14 years ago
94060a1
Blackfin: bfin_mac: remove space from name
by Mike Frysinger
· 14 years ago
787e343
Blackfin: unify default I2C settings for ADI boards
by Mike Frysinger
· 14 years ago
bbf4fbb
Blackfin: bf561: use DMA for Core B L1 regions
by Mike Frysinger
· 14 years ago
b14fff8
Blackfin: cm-bf548: convert to portmux framework
by Mike Frysinger
· 14 years ago
22e6440
Blackfin: bf527-ezkit: convert to portmux framework
by Mike Frysinger
· 14 years ago
d1f49b4
Blackfin: bf548-ezkit: convert to portmux framework
by Mike Frysinger
· 14 years ago
032c44e
Blackfin: bf518f-ezbrd: convert to portmux framework
by Mike Frysinger
· 14 years ago
0c92942
Blackfin: bf518f-ezbrd: handle different PHYs dynamically
by Mike Frysinger
· 15 years ago
9280c3f
Blackfin: bf533-stamp: scrub unused code
by Mike Frysinger
· 14 years ago
7d44f5e
Blackfin: blackstamp: convert eth/flash swap logic to gpio framework
by Mike Frysinger
· 14 years ago
6cfcf58
Blackfin: bf533-stamp: convert eth/flash swap logic to gpio framework
by Mike Frysinger
· 14 years ago
37a4b75
Blackfin: bfin_spi: support gpios as chip selects
by Mike Frysinger
· 14 years ago
f3732ed
Blackfin: bfin_spi: convert to portmux framework
by Mike Frysinger
· 14 years ago
a409fdd
Blackfin: serial: convert to portmux framework
by Mike Frysinger
· 14 years ago
c5dc482
Blackfin: pata_bfin: convert to portmux framework
by Mike Frysinger
· 14 years ago
a87589f
Blackfin: bfin_sdh: convert to portmux framework
by Mike Frysinger
· 14 years ago
253f47f
Blackfin: bfin_nand: convert to portmux framework
by Mike Frysinger
· 14 years ago
8339ad7
Blackfin: bfin_mac: convert to portmux framework
by Mike Frysinger
· 14 years ago
ab9164d
edminiv2: add ethernet support
by Albert Aribaud
· 14 years ago
d3c9ffd
mvgbe: add support for orion5x GbE controller
by Albert Aribaud
· 14 years ago
d44265a
mvgbe: support SoCs other than kirkwood
by Albert Aribaud
· 14 years ago
9b6bcdc
net: rename: kirkwood_egiga as mvgbe
by Albert Aribaud
· 14 years ago
c67e2cc
kirkwood_egiga: CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION
by Albert Aribaud
· 14 years ago
53504a2
NAND: formatting cleanups from env.oob support
by Scott Wood
· 14 years ago
c9f7351
NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB)
by Ben Gardiner
· 14 years ago
a3c09f6
nios2: remove EP1C20, EP1S10, EP1S40 boards
by Thomas Chou
· 14 years ago
551265f
nios2: add spi flash support to nios2-generic board
by Thomas Chou
· 15 years ago
ec3b498
gpio_led: add gpio_request to __led_init
by Thomas Chou
· 14 years ago
6db6c18
nios2: add gpio_request
by Thomas Chou
· 14 years ago
06c5d30
nios2: add fdt support
by Thomas Chou
· 14 years ago
cb2da50
nios2: use gc sections to reduce image size
by Thomas Chou
· 14 years ago
836cd45
cpuat91: unbreak ethernet
by Eric Bénard
· 14 years ago
409943a
at91_emac: Write MAC address automatically
by Eric Bénard
· 14 years ago
cafb14f
AX88180: use standard I/O accessors
by Mike Frysinger
· 14 years ago
14f637f
AX88180: make OUTW handle 32bit/16bit defines too
by Hoan Hoang
· 15 years ago
2566706
AX88180: add support for the Marvell 88E1118 phy
by Hoan Hoang
· 15 years ago
6bb4679
Write MAC address automatically on MACB-based boards
by Ben Warren
· 14 years ago
aa9fba5
smc91xx_eeprom: Correct chip detection check.
by Juergen Kilb
· 14 years ago
daa2ce6
tsec: fix the return value for tsec_eth_init()
by Timur Tabi
· 14 years ago
ec0d879
uli526x: drop newlines from device name
by Mike Frysinger
· 14 years ago
1384f3b
net: warn about spaces in device names
by Mike Frysinger
· 14 years ago
f9abdfe
AX88180: switch to common mii.h header
by Mike Frysinger
· 15 years ago
141ab7a
AX88180: improve phy searching
by Mike Frysinger
· 15 years ago
bb7336a
AX88180: fix media typos
by Hoan Hoang
· 15 years ago
36de211
AX88180: add missing init prototype
by Mike Frysinger
· 15 years ago
49fa6ed
kirkwood_egiga: updates: fix DRAM mapping and typo
by Albert Aribaud
· 14 years ago
5b1b188
SPEAr : Network driver support added
by Vipin KUMAR
· 14 years ago
c19a20d
kirkwood_egiga: bugfix: add DMA sequence points
by Albert Aribaud
· 14 years ago
ca08054
net: Add option to disable fiber on M88E1111 PHY for PPC4xx
by Stefan Roese
· 14 years ago
67bee2f
net: dm9000x: re-add casts to I/O pointers to fix gcc warnings
by Mike Frysinger
· 14 years ago
26918b7
tsec: add micrel ksz804 phy
by Heiko Schocher
· 14 years ago
4e43b2e
83xx: add support for ve8313 board
by Heiko Schocher
· 14 years ago
5fb1703
MPC8308RDB: minimal support for devboard from Freescale
by Ilya Yanok
· 14 years ago
7c619dd
mpc8308: support for Freescale MPC8308 cpu
by Ilya Yanok
· 14 years ago
67ceefa
Blackfin: convert plat-nand code to GPIO framework
by Mike Frysinger
· 14 years ago
bc1a884
mtd: nand_plat: add simple GPIO framework DEV_READY option
by Mike Frysinger
· 14 years ago
1445f6f
NAND: add Toshiba TC58NVG0 identifier
by Florian Fainelli
· 14 years ago
3e9b349
NAND: show manufacturer and device ID for unknown chips
by Florian Fainelli
· 14 years ago
dce6538
Davinci: SPI: add the missing v2 patch changes
by Nick Thompson
· 14 years ago
8971696
mmc: add function prototype for mmc_set_dev in mmc.h
by Steve Sakoman
· 14 years ago
c57cca2
ARMV7: Add support for TI OMAP4 Panda
by Steve Sakoman
· 14 years ago
3e76d62
ARMV7: Add support for TI OMAP4430 SDP
by Steve Sakoman
· 14 years ago
938717c
ARMV7: Restructure OMAP i2c driver to allow code sharing between OMAP3 and OMAP4
by Steve Sakoman
· 14 years ago
bec3dc7
ARMV7: Restructure OMAP mmc driver to allow code sharing between OMAP3 and OMAP4
by Steve Sakoman
· 14 years ago
d34efc7
ARMV7: Add basic support for TI OMAP4
by Steve Sakoman
· 14 years ago
f56348a
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
by Steve Sakoman
· 14 years ago
8f22327
OMAP: mmc: add support for second and third mmc channels
by Steve Sakoman
· 15 years ago
570ba44
Blackfin: convert gpio flash logic to common gpio layer
by Mike Frysinger
· 14 years ago
3f390e1
Blackfin: bf537-stamp: use common spi boot workaround code
by Mike Frysinger
· 14 years ago
a84774f
Blackfin: switch to common GPIO LED driver
by Mike Frysinger
· 14 years ago
ca86ba1
Blackfin: back out status_led.h stubs
by Mike Frysinger
· 14 years ago
c553055
Blackfin: unify custom gpio commands
by Mike Frysinger
· 14 years ago
4638b21
Blackfin: import gpio/portmux layer from Linux
by Mike Frysinger
· 14 years ago
5cbbabc
Blackfin: ibf-dsp561: enable AX88180 net driver
by Hoan Hoang
· 15 years ago
ce53fc6
Blackfin: set up simple NMI handlers for anomaly 05000219
by Mike Frysinger
· 15 years ago
53ea150
Blackfin: update anomaly lists to latest sheets
by Mike Frysinger
· 15 years ago
7393a09
Blackfin: bf537-stamp: drop old spi_flash driver
by Mike Frysinger
· 15 years ago
b30453a
Blackfin: expand EVT1 usage documentation a bit more
by Mike Frysinger
· 15 years ago
a5384ae
Blackfin: implement bootcount support
by Mike Frysinger
· 15 years ago
66a4909
Blackfin: clean up trace buffer handling when crashing
by Mike Frysinger
· 15 years ago
54841ab
Make sure that argv[] argument pointers are not modified.
by Wolfgang Denk
· 14 years ago
b218ccb
Redundant environment: move flag definitions to header file
by Wolfgang Denk
· 14 years ago
d9c2725
Make *printf() return "int" instead of "void"
by Wolfgang Denk
· 14 years ago
c0c1537
exports.c: fix warning: 'dummy' defined but not used
by Wolfgang Denk
· 14 years ago
cd47a83
cmd_ide.c: fix unused variable warning for SC3 board
by Wolfgang Denk
· 14 years ago
0e70aaa
shannon/INFERNO: fix special handling of environment configuration
by Wolfgang Denk
· 14 years ago
9add504
boards.cfg: fix ML2, am3517_evm and s5p_goni boards
by Wolfgang Denk
· 14 years ago
291e904
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
by Wolfgang Denk
· 14 years ago
f12d4cb
Merge branch 'sf' of git://git.denx.de/u-boot-blackfin
by Wolfgang Denk
· 14 years ago
273ed03
ppc4xx: Add T3COPR board support (PPC460GT based)
by Stefan Roese
· 15 years ago
4978e60
ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460
by Stefan Roese
· 14 years ago
2909ac0
ppc4xx: Add DDR1/2 macros in ppc4xx-sdram.h for non-405EX as well
by Stefan Roese
· 14 years ago
e9c020d
ppc4xx: DDR2: Complete RDSS configuration on non-SPD based boards
by Stefan Roese
· 14 years ago
066003b
ppc4xx: Enable overwriting of default scan window for IBM DDR2 controller
by Stefan Roese
· 14 years ago
db64377
ppc4xx: Enable PCIe support without PCI support on PPC440/460
by Stefan Roese
· 14 years ago
fe7cca7
ppc4xx: Enable booting with Option E on 460EX/EXr/GT
by Stefan Roese
· 15 years ago
b376bbb
sf: move useful messages from debug to printf
by Mike Frysinger
· 15 years ago
Next »