1. a7f2ecf ARM: UniPhier: move EEPROM device node into a separate DTS by Masahiro Yamada · 10 years ago
  2. 5848899 ARM: UniPhier: remove dummy gpio.h by Masahiro Yamada · 10 years ago
  3. 37ffffb Merge branch 'master' of git://git.denx.de/u-boot-ti by Tom Rini · 10 years ago
  4. be8ddad Merge branch 'master' of git://git.denx.de/u-boot-sunxi by Tom Rini · 10 years ago
  5. 37d46dd sunxi: rsb: Move rsb_set_device_mode() call to rsb_init() by Hans de Goede · 10 years ago
  6. d35488c sunxi: rsb: Add sun9i (A80 support) by Hans de Goede · 10 years ago
  7. c13f60d sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig option by Hans de Goede · 10 years ago
  8. 8e3da9d Merge branch 'master' of git://git.denx.de/u-boot-dm by Tom Rini · 10 years ago
  9. 0f274f5 ARM: armv7 fix spelling of SCTRL by Peng Fan · 10 years ago
  10. ffc1037 vexpress64: support the Juno Development Platform by Linus Walleij · 10 years ago
  11. f91afc4 vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS by Linus Walleij · 10 years ago
  12. bd76826 dm: exynos: dts: Set the offset length for cros_ec by Simon Glass · 10 years ago
  13. 55df43c odroid u3: dts: add missing i2c aliases by Przemyslaw Marczak · 10 years ago
  14. fda0e27 exynos5: pinmux: check flag for i2c config by Przemyslaw Marczak · 10 years ago
  15. 232a02c arndale: dts: add missing i2c aliases by Przemyslaw Marczak · 10 years ago
  16. 8fd10a8 exynos4: dts: add missing i2c properties by Przemyslaw Marczak · 10 years ago
  17. 25ab4b0 dm: i2c: Provide an offset length parameter where needed by Simon Glass · 10 years ago
  18. 6f755eb dm: exynos: dts: Use GPIO bank phandles for GPIOs by Simon Glass · 10 years ago
  19. 2b2b50b dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs by Simon Glass · 10 years ago
  20. 0347960 dm: mmc: Remove use of fdtdec GPIO support by Simon Glass · 10 years ago
  21. 9762a41 dm: zynq: Remove inline gpio functions by Simon Glass · 10 years ago
  22. 04072cb dm: tegra: video: Remove use of fdtdec GPIO support by Simon Glass · 10 years ago
  23. 212324a davinci: Do not duplicate setting of gd by Tom Rini · 10 years ago
  24. 7bc53ef omap3: add some MUX definitions for upcoming cairo by Albert ARIBAUD \(3ADEV\) · 10 years ago
  25. 5bfdd1f omap3: mmc: add 1.8v bias setting for MMC1 by Albert ARIBAUD \(3ADEV\) · 10 years ago
  26. d215b3e omap3: add SDRC settings for Samsung K4X51163PG by Albert ARIBAUD \(3ADEV\) · 10 years ago
  27. 03843da omap3: make SDRC SHARING setting configurable by Albert ARIBAUD \(3ADEV\) · 10 years ago
  28. 168f594 omap3: enable GP9 timer and UART2 by Albert ARIBAUD \(3ADEV\) · 10 years ago
  29. b558af8 ARM: OMAP5: DRA7xx: Add support for power rail grouping by Lubomir Popov · 10 years ago
  30. aed03fa Merge branch 'master' of git://git.denx.de/u-boot-atmel by Tom Rini · 10 years ago
  31. 306df2c Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 10 years ago
  32. c8eac66 ARM: zynq: List qspi, smc and nand baseaddresses by Michal Simek · 10 years ago
  33. 63e3cea ARM: zynq: List nand, qspi and jtag boot modes by Michal Simek · 10 years ago
  34. f60c6fb ARM: zynq: slcr: Dont modify the reserved bits by Siva Durga Prasad Paladugu · 10 years ago
  35. 3ad87ca ARM: zynq: ddrc: Setup half of memory only for ECC case by Michal Simek · 11 years ago
  36. 555c7c0 ARM: zynq: Remove empty line by Michal Simek · 10 years ago
  37. c08cfc2 ARM: zynq: Enable the Neon instructions by Michal Simek · 10 years ago
  38. 03cae72 Merge branch 'master' of git://git.denx.de/u-boot-marvell by Tom Rini · 10 years ago
  39. 62d1e99 ARM: kirkwood: fix cpu info for 6282 device id by Luka Perkov · 11 years ago
  40. 41ba57d fsl/ls1021qds: Add deep sleep support by tang yuantian · 10 years ago
  41. 33d2e46 ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot by Alison Wang · 10 years ago
  42. 7df50fd arm: ls102xa: Update snoop settings for CCI-400 by Alison Wang · 10 years ago
  43. 5699274 ARM: HYP/non-sec: Make variable gic_dist_addr as a local one by tang yuantian · 10 years ago
  44. 0181937 crypto/fsl: Add fixup for crypto node by Ruchika Gupta · 10 years ago
  45. d8f5275 arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL by Ruchika Gupta · 10 years ago
  46. 0f5e557 ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default by Alison Wang · 10 years ago
  47. dda3b61 arm/ls1021a: Add workaround for DDR erratum A008378 by York Sun · 10 years ago
  48. 3b95288 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 10 years ago
  49. 032c686 Merge branch 'master' of git://git.denx.de/u-boot-uniphier by Tom Rini · 10 years ago
  50. 0ba924a ARM: UniPhier: add SG_MEMCONF macros for DDR channel 2 by Masahiro Yamada · 10 years ago
  51. 367a0d5 ARM: UniPhier: rename SG_MEMCONF_* macros for readability by Masahiro Yamada · 10 years ago
  52. 4a35d60 ARM: UniPhier: use <linux/sizes.h> for readability by Masahiro Yamada · 10 years ago
  53. ee94ee3 ARM: UniPhier: remove non-sense inline directives by Masahiro Yamada · 10 years ago
  54. ec79c79 ARM: UniPhier: add static to local functions by Masahiro Yamada · 10 years ago
  55. 4484374 ARM: UniPhier: fix IECTRL set code for PH1-Pro4 by Masahiro Yamada · 10 years ago
  56. 061ae4c ARM: UniPhier: describe init_page_table shorter by Masahiro Yamada · 10 years ago
  57. 89a7c77 ARM: UniPhier: fix comments in SoC Glue init function by Masahiro Yamada · 10 years ago
  58. d6bc30a ARM: UniPhier: remove __packed that causes a problem on GCC 4.9 by Masahiro Yamada · 10 years ago
  59. 65afbbd Merge branch 'phys_t' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 10 years ago
  60. 1a800f7 sunxi: Hookup OTG USB controller support by Hans de Goede · 10 years ago
  61. 7cd6f92 sunxi: video: Use frontend for dma on sun4i to fix memory bandwidth problems by Hans de Goede · 10 years ago
  62. 8ffc487 sunxi: Stop differentiating between 512M and 1G variants of the same board by Hans de Goede · 10 years ago
  63. daf2263 sunxi: mmc: Add support for sun9i (A80) by Hans de Goede · 10 years ago
  64. dacc088 sun9i: Add sun9i (A80) clock setup support by Hans de Goede · 10 years ago
  65. e35377d sun9i: Add clock_sun9i.h with ccu register layout for sun9i by Hans de Goede · 10 years ago
  66. ee74fec sun9i: Add cpu_sun9i.h with iomem defines by Hans de Goede · 10 years ago
  67. 9803e4e sunxi: Rename cpu.h to cpu_sun4i.h by Hans de Goede · 10 years ago
  68. cc67a0b sunxi: Move clock_get_pllX / clock_set_pllX protos to mach specific headers by Hans de Goede · 10 years ago
  69. 22b6183 sunxi: Drop pll6 setting from clock_init_uart by Hans de Goede · 10 years ago
  70. 6515032 sunxi: display: Make lcd display clk phase configurable by Hans de Goede · 10 years ago
  71. b56f6e2 sunxi: Restore lowlevel_init usage by Hans de Goede · 10 years ago
  72. 38cd2d9 mmc: zynq: Use phys_addr_t for addresses by Michal Simek · 10 years ago
  73. 1cd2000 Merge branch 'master' of git://git.denx.de/u-boot-mmc by Tom Rini · 10 years ago
  74. 80caacf zynq: Remove reference to gdata by Simon Glass · 10 years ago
  75. 72d42ba mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC by Nobuhiro Iwamatsu · 10 years ago
  76. 765ece8 ARM: atmel: sama5d4: add usb device initial code by Bo Shen · 10 years ago
  77. e05e46e ARM: atmel: sama5d4: add usb platform data by Bo Shen · 10 years ago
  78. 99197a9 arm, arm926ejs: make thumb mode compileable by Heiko Schocher · 10 years ago
  79. 2b7c0f3 sunxi: Drop use of lowlevel_init() by Simon Glass · 10 years ago
  80. f630974 sunxi: Move SPL s_init() code to board_init_f() by Simon Glass · 10 years ago
  81. 480ca13 arm: Add warnings about using gdata by Simon Glass · 10 years ago
  82. a6b541b TI ARMv7: Don't use GD before crt0.S has set it by Tom Rini · 10 years ago
  83. ab77f24 Merge branch 'master' of git://git.denx.de/u-boot-ti by Tom Rini · 10 years ago
  84. f1075ae ARM: armv8: Fix typo in commentary by Michal Simek · 10 years ago
  85. 9637c4b Add support for Seagate BlackArmor NAS220 by Evgeni Dobrev · 10 years ago
  86. a90e77d sunxi: usbc: Add support for usb-vbus0 controller by axp drivebus pin by Hans de Goede · 10 years ago
  87. 4458b7a sunxi: usbc: Add support for usb0 to the common usbc code by Hans de Goede · 10 years ago
  88. 0eccec4 sunxi: Move usb-controller init code out of ehci-sunxi.c for reuse for otg by Hans de Goede · 10 years ago
  89. 05c4bd3 sun7i: Move psci_arch_init close to text_end by Jan Kiszka · 10 years ago
  90. 602fa46 sun7i: Add support for taking CPUs offline via PSCI by Jan Kiszka · 10 years ago
  91. 213480e sunxi: video: Add lvds support by Hans de Goede · 10 years ago
  92. d9786d2 sunxi: video: Add VGA output support by Hans de Goede · 10 years ago
  93. 2dae800 sunxi: video: Add lcd output support by Hans de Goede · 10 years ago
  94. 5489ebc sunxi: video: Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1 by Hans de Goede · 10 years ago
  95. 6c727e0 sunxi: gpio: Add support for gpio pins on the AXP209 pmic by Hans de Goede · 10 years ago
  96. d27f7d1 sunxi: gpio: Properly sort mux defines by port number by Hans de Goede · 10 years ago
  97. 876aaaf sunxi: video: Set input sync enable by Hans de Goede · 10 years ago
  98. 5ee0bea sunxi: video: Add hdmi support by Hans de Goede · 10 years ago
  99. 7548160 sunxi: video: Add DDC & EDID support by Hans de Goede · 10 years ago
  100. 25508ab sunxi: Fix PLL1 running at half speed on sun8i by Hans de Goede · 10 years ago