Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / c2996086c2b7b9574bf8eed6c9b971f44d7a81d3
  1. ec4836b i.MX28: Add LRADC register definitions by Marek Vasut · 13 years ago
  2. 8d4c759 i.MX28: Shut down the LCD controller before reset by Marek Vasut · 13 years ago
  3. cfe96f7 i.MX28: Add LCDIF register definitions by Marek Vasut · 13 years ago
  4. f8c4a86 i.MX28: Implement boot pads sampling and reporting by Marek Vasut · 13 years ago
  5. 0239c2f i.MX28: Improve passing of data from SPL to U-Boot by Marek Vasut · 13 years ago
  6. 9a0f98d M28EVK: Add SD update command by Marek Vasut · 13 years ago
  7. b7154ec M28EVK: Implement support for new board V2.0 by Marek Vasut · 13 years ago
  8. a5990b2 FEC: Abstract out register setup by Marek Vasut · 13 years ago
  9. c4559da MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged by Stefano Babic · 13 years ago
  10. 8f97586 i.MX28: Add delay after CPU bypass is cleared by Marek Vasut · 13 years ago
  11. 148ca64 spi: mxs: Allow other chip selects to work by Fabio Estevam · 13 years ago
  12. 79cb14a spi: mxs: Introduce spi_cs_is_valid() by Fabio Estevam · 13 years ago
  13. 6ecaee8 mx53loco: Remove unneeded gpio_set_value() by Fabio Estevam · 13 years ago
  14. 54cd1de mx53loco: Add CONFIG_REVISION_TAG by Fabio Estevam · 13 years ago
  15. 768a059 mx53loco: Turn on VUSB regulator by Fabio Estevam · 13 years ago
  16. 5b547f3 mx53loco: Add mc34708 support and set mx53 frequency at 1GHz by Fabio Estevam · 13 years ago
  17. ed5157e pmic: dialog: Avoid name conflicts by Fabio Estevam · 13 years ago
  18. bff969e imx: Add u-boot.imx as target for ARM9 i.MX SOCs by Timo Ketola · 13 years ago
  19. 8f385e9 i.MX2: Include asm/types.h in arch-mx25/imx-regs.h by Timo Ketola · 13 years ago
  20. 5614553 imx: usb: There is no such register by Timo Ketola · 13 years ago
  21. 45b460d i.MX25: usb: Set PORTSCx register by Timo Ketola · 13 years ago
  22. a102873 imx: nand: Support flash based BBT by Timo Ketola · 13 years ago
  23. eba1868 i.MX25: This architecture has a GPIO4 too by Timo Ketola · 13 years ago
  24. 42d2532 i.MX25: esdhc: Add mxc_get_clock infrastructure by Timo Ketola · 13 years ago
  25. 3996a96 i.MX6: mx6q_sabrelite: add SATA bindings by Eric Nelson · 13 years ago
  26. 64e7cdb i.MX6: add enable_sata_clock() by Eric Nelson · 13 years ago
  27. cac833a i.MX6: Add ANATOP regulator init by Dirk Behme · 13 years ago
  28. ecb7be2 mx28evk: add NAND support by Lauri Hintsala · 13 years ago
  29. 3f29d96 USB: ehci-mx6: Fix broken IO access by Wolfgang Grandegger · 13 years ago
  30. feef24e M28: Scan only first 512 MB of DRAM to avoid memory wraparound by Marek Vasut · 13 years ago
  31. d2f7ae1 Revert "i.MX28: Enable additional DRAM address bits" by Marek Vasut · 13 years ago
  32. 6725ebd M28: Enable FDT support by Marek Vasut · 13 years ago
  33. e7e3372 mx53loco: Add support for 1GHz operation for DA9053-based boards by Fabio Estevam · 13 years ago
  34. 1fc56f1 mx53loco: Allow to print CPU information at a later stage by Fabio Estevam · 13 years ago
  35. 70cc86a mx5: Add clock config interface by Fabio Estevam · 13 years ago
  36. 6a37604 imx-common: Factor out get_ahb_clk() by Fabio Estevam · 13 years ago
  37. 28fdbdd i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow by Eric Nelson · 13 years ago
  38. 0c23d84 mx31pdk: Allow booting a zImage kernel by Fabio Estevam · 13 years ago
  39. f0e77b3 mx6qarm2: Allow booting a zImage kernel by Fabio Estevam · 13 years ago
  40. 5fbfd1c2 mx6qsabrelite: Allow booting a zImage kernel by Fabio Estevam · 13 years ago
  41. 34990e1 mx28evk: Allow booting a zImage kernel by Fabio Estevam · 13 years ago
  42. b91ce01 m28evk: Allow to booting a dt kernel by Fabio Estevam · 13 years ago
  43. e310016 mx28evk: Allow to booting a dt kernel by Fabio Estevam · 13 years ago
  44. bdb9f76 mx6qsabrelite: No need to set the direction for GPIO3_23 again by Fabio Estevam · 13 years ago
  45. 2083106 pmic: Add support for the Dialog DA9053 PMIC by Fabio Estevam · 13 years ago
  46. f92e4e6 MX53: mx53loco: Add SATA support by Stefano Babic · 13 years ago
  47. 79656d2 MX53: Add support to ESG ima3 board by Stefano Babic · 13 years ago
  48. 9f472e6 SATA: add driver for MX5 / MX6 SOCs by Stefano Babic · 13 years ago
  49. 8c38b5d MX53: add function to set SATA clock to internal by Stefano Babic · 13 years ago
  50. 71cadda SATA: check for return value from sata functions by Stefano Babic · 13 years ago
  51. d87c85c MX5: Add definitions for SATA controller by Stefano Babic · 13 years ago
  52. b774fe9 NET: fec_mxc.c: Add a way to disable auto negotiation by Stefano Babic · 13 years ago
  53. 4a9677e Define UART4 and UART5 base addresses by Stefano Babic · 13 years ago
  54. f78095e EXYNOS: Change bits per pixel value proper for u-boot. by Donghwa Lee · 13 years ago
  55. 51b1cd6 EXYNOS: support TRATS board display function by Donghwa Lee · 13 years ago
  56. bba09e9 LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI by Donghwa Lee · 13 years ago
  57. 2c7396c EXYNOS: support EXYNOS MIPI DSI interface driver. by Donghwa Lee · 13 years ago
  58. 6d4339f EXYNOS: support EXYNOS framebuffer and FIMD display drivers. by Donghwa Lee · 13 years ago
  59. 559a05c LCD: add data structure for EXYNOS display driver by Donghwa Lee · 13 years ago
  60. 37835d4 EXYNOS: add LCD and MIPI DSI clock interface. by Donghwa Lee · 13 years ago
  61. 283591f EXYNOS: definitions of system resgister and power management registers. by Donghwa Lee · 13 years ago
  62. 8f2fabe SMDK5250: fix compiler warning by Minkyu Kang · 13 years ago
  63. 04ce68e misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998 by Łukasz Majewski · 13 years ago
  64. 8504296 misc:pmic:max8997 MAX8997 support for PMIC driver by Łukasz Majewski · 13 years ago
  65. e687c5a TRATS: modify the trats's configuration by Jaehoon Chung · 13 years ago
  66. 4d86bf0 ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement by Łukasz Majewski · 13 years ago
  67. 9000509 EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc by Chander Kashyap · 13 years ago
  68. 2d594fd arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT by Nobuhiro Iwamatsu · 13 years ago
  69. 8913e6b arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT by Nobuhiro Iwamatsu · 13 years ago
  70. 79874ae cm-t35: add I2C multi-bus support by Nikita Kiryanov · 13 years ago
  71. 4ac16f2 include/configs: Remove CONFIG_SYS_64BIT_STRTOUL by Tom Rini · 13 years ago
  72. 1005ccf include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF by Tom Rini · 13 years ago
  73. 8a87a3d omap3: Introduce weak misc_init_r by Tom Rini · 13 years ago
  74. 60bd10d omap730p2: Remove empty misc_init_r by Tom Rini · 13 years ago
  75. b8f4a72 omap5912osk: Remove empty misc_init_r by Tom Rini · 13 years ago
  76. aa2889c omap4+: Remove CONFIG_ARCH_CPU_INIT by Tom Rini · 13 years ago
  77. 4335517 omap4: Remove CONFIG_SYS_MMC_SET_DEV by Tom Rini · 13 years ago
  78. 9baa37b OMAP3: pandora: drop console kernel argument by Grazvydas Ignotas · 13 years ago
  79. 7cad446 OMAP3: pandora: revise GPIO configuration by Grazvydas Ignotas · 13 years ago
  80. 10cd73b OMAP3: pandora: pin mux updates for DM3730 board variant by Grazvydas Ignotas · 13 years ago
  81. 06a119a Makefile: Add a 'checkthumb' rule by Tom Rini · 13 years ago
  82. 19a695f tools, config.mk: Add gcc-version.sh, cc-version test from Linux by Tom Rini · 13 years ago
  83. 20c6312 OMAP4: enable Thumb build by Aneesh V · 13 years ago
  84. 03f69dc omap4+: Avoid using __attribute__ ((__packed__)) by Aneesh V · 13 years ago
  85. f61faeb armv7: Use -march=armv7-a and thereby enable Thumb-2 by Aneesh V · 13 years ago
  86. 5356f54 ARM: enable Thumb build by Aneesh V · 13 years ago
  87. 74236ac armv7: add appropriate headers for assembly functions by Aneesh V · 13 years ago
  88. 7245536 arm: adapt asm/linkage.h from Linux by Aneesh V · 13 years ago
  89. 0696473 OMAP5: reset: Use cold reset in case of 5430ES1.0 by SRICHARAN R · 13 years ago
  90. d417d1db5f OMAP3+: reset: Create a common reset layer. by SRICHARAN R · 13 years ago
  91. 328aeca mmc: omap5evm: Add eMMC saveenv support by Balaji T K · 13 years ago
  92. dd23e59 omap5: pbias ldo9 turn on by Balaji T K · 13 years ago
  93. 2114429 power: twl6035: add palmas PMIC support by SRICHARAN R · 13 years ago
  94. f75231b arm: omap5: correct boot device mode7 for eMMC by Balaji T K · 13 years ago
  95. aaec448 OMAP4/5: emif: Correct the emif power mgt shadow register bit fields. by SRICHARAN R · 13 years ago
  96. 971f2ba OMAP5: ddr: Change the ddr device name. by SRICHARAN R · 13 years ago
  97. 7a4bf20 OMAP5: defconfig: Align the defconfig for 5430 ES1.0 by SRICHARAN R · 13 years ago
  98. c1fa3c3 OMAP4/5: device: Add support to get the device type. by SRICHARAN R · 13 years ago
  99. 002a2c0 OMAP4/5: Make the sysctrl structure common by SRICHARAN R · 13 years ago
  100. 47c5014 OMAP5: SRAM: Change the SRAM base address. by SRICHARAN R · 13 years ago