- d829f12 bulidman: Add support for a simple build by Simon Glass · 4 years, 8 months ago
- e9fbbf6 buildman: Document the members of BuilderJob by Simon Glass · 4 years, 8 months ago
- ed49ea9 main: Drop show_boot_progress() prototype by Simon Glass · 4 years, 8 months ago
- a1f49ab sandbox: Add documentation about required/useful packages by Simon Glass · 4 years, 8 months ago
- 1390c40 Merge branch '2020-04-10-gitlab-travis-gcc9' into next by Tom Rini · 4 years, 7 months ago
- ddd4d99 travis: Switch to gcc 9.2.0 by Bin Meng · 4 years, 8 months ago
- 205254e buildman: Support fetching gcc 9.2.0 by Bin Meng · 4 years, 8 months ago
- a0c91fe video: sunxi: Change sunxi_get_mon_desc() to not return NULL for the default case by Bin Meng · 4 years, 8 months ago
- 49fb28a azure/gitlab/travis: Add RISC-V SPL testing by Bin Meng · 4 years, 8 months ago
- b2c2608 test/py: Update u_boot_utils.find_ram_base to bypass the low 2MiB memory by Bin Meng · 4 years, 8 months ago
- a379d33 azure/gitlab/travis: Add qemu-riscv32 testing by Bin Meng · 4 years, 8 months ago
- 9eed8cd travis: Build GRUB image for RISC-V 32-bit and 64-bit by Bin Meng · 4 years, 8 months ago
- 091b48e travis: Replace pre-built ARM/ARM64 GRUB images with the one built from source by Bin Meng · 4 years, 8 months ago
- 20bc19a Azure/GitLab: Move to latest Docker images by Tom Rini · 4 years, 7 months ago
- 587e4a4 kconfig / kbuild: Re-sync with Linux 4.19 by Tom Rini · 4 years, 8 months ago
- 1ebf50d Merge tag 'u-boot-amlogic-20200406' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic into next by Tom Rini · 4 years, 8 months ago
- 1f47e2a Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 4 years, 8 months ago
- 895a786 serial: zynq: Change uart initialization logic by Michal Simek · 4 years, 8 months ago
- 5028358 watchdog: versal: Add support for Xilinx window watchdog by Ashok Reddy Soma · 4 years, 8 months ago
- 453bb77 arm64: xilinx: Never touch DDR if system has no DDR by Michal Simek · 4 years, 8 months ago
- 98da866 arm64: versal: Disable DDR cache mapping if DDR is not enabled by Michal Simek · 4 years, 8 months ago
- b8c3d3f arm64: zynqmp: Add support for u-boot.itb generation without ATF by Michal Simek · 4 years, 8 months ago
- 3d03752 arm64: zynqmp: Reorder parameters for zynqmp_mmio_write() by Michal Simek · 4 years, 8 months ago
- 73319ee firmware: zynqmp: Enable IPI code calling also in EL3 by Michal Simek · 4 years, 8 months ago
- f8451f1 arm64: zynqmp: Move timeout for clock propagation below psu_init by Michal Simek · 4 years, 8 months ago
- c0adba5 arm64: zynqmp: Add support for debug uart also for U-Boot proper by Michal Simek · 4 years, 11 months ago
- 0486497 lib: Improve _parse_integer_fixup_radix base 16 detection by Michal Simek · 4 years, 10 months ago
- 352f86b arm64: zynqmp: Enable netconsole for ZynqMP by Michal Simek · 4 years, 8 months ago
- 387121c arm64: zynqmp Add support for zcu111 revA by Michal Simek · 4 years, 8 months ago
- d4172c9 net: eth-uclass: Fix message if mac is coming from DT or ROM by Michal Simek · 4 years, 8 months ago
- 001ad66 ARM: zynq: Enable i2c mux support for all boards by Michal Simek · 4 years, 9 months ago
- 47cc45a arm64: zynqmp Add support for zcu102 rev1.1 by Michal Simek · 4 years, 8 months ago
- f1433d0 arm64: zynqmp: Add third backup bootmode by Michal Simek · 4 years, 8 months ago
- f7e296d watchdog: cadence: Remove DECLARE_GLOBAL_DATA_PTR from driver by Michal Simek · 4 years, 9 months ago
- 25de8a8 net: zynq-gem: Setup and use mdio base separately by Michal Simek · 8 years ago
- 88f0dc3 ARM: zynq: Do not print message about boot device by Michal Simek · 4 years, 9 months ago
- 66ef85d arm64: zynqmp: Check firmware node when driver is enabled by Michal Simek · 4 years, 9 months ago
- 36cd899 arm64: versal: Enable support for Gigadevice/ISSI flashes by T Karthik Reddy · 4 years, 9 months ago
- 8d78211 env: Make mmc as default option for CONFIG_ENV_FAT_INTERFACE by Michal Simek · 4 years, 9 months ago
- f7375af ARM: zynq: Enable DM for CFI NOR flash by Michal Simek · 4 years, 9 months ago
- 5992f25 ARM: zynq: Do not report NOR flash detection failure by Michal Simek · 4 years, 9 months ago
- 3811746 nand: raw: zynq: Do not try to probe driver if nand flash is disabled by Michal Simek · 4 years, 9 months ago
- 36f1f3b nand: raw: Do not free xnand structure by Michal Simek · 4 years, 9 months ago
- 7c49a6d ARM: zynq: Do not include full zynq-7000.dtsi to cse-nor configuration by Michal Simek · 4 years, 9 months ago
- 0f8defd net: zynq_gem: Add cache flush to zynq_gem_free_pkt by Ashok Reddy Soma · 4 years, 9 months ago
- f7c6ee7 ARM: zynq: Switch to single zynq configurations by Michal Simek · 4 years, 9 months ago
- dacec83 Makefile: Add environment variable DEVICE_TREE to header by Michal Simek · 4 years, 9 months ago
- f5a122e ARM: zynq: Change zc770 xm011 Nand x16 configurations by Michal Simek · 4 years, 9 months ago
- 63e988e env: Kconfig: Adding default values for Microblaze by Varalaxmi Bingi · 4 years, 10 months ago
- 00fb945 arm64: zynqmp: Move pinctrl node under firmware node by Michal Simek · 4 years, 9 months ago
- ba19690 arm64: zynqmp: Fix GIC compatible property by Michal Simek · 4 years, 9 months ago
- 0ac6500 ARM: zynq: Fix addresses in partition definitions by Michal Simek · 4 years, 9 months ago
- 5df63a6 arm64: zynqmp: Fix addresses in partition definitions by Michal Simek · 4 years, 9 months ago
- 04437de arm64: zynqmp: Sync DP subsystem by Michal Simek · 4 years, 9 months ago
- 0546b1a arm64: zynqmp: Do not duplicate flash partition label property by Amit Kumar Mahapatra · 4 years, 9 months ago
- d9872d8 arm64: dts: zynqmp: Add clk cells for sdhci by Ashok Reddy Soma · 4 years, 9 months ago
- 87b0176 arm64: zynqmp: Remove second copy of reset-controller by Michal Simek · 4 years, 9 months ago
- 12ffe75 arm64: zynqmp: Add 'no-1-8-v' property for ZynqMP Boards by Manish Narani · 4 years, 9 months ago
- 2162099 arm64: zynqmp: Sync zynqmp fpga manager with mainline by Nava kishore Manne · 5 years ago
- 39419c2 arm64: zynqmp: Remove unused zynqmp-clk.dtsi by Michal Simek · 4 years, 9 months ago
- d4fb2d1 ARM: zynq: Fix spi name node by Michal Simek · 5 years ago
- d31f1c9 arm64: zynqmp: Update Copyright years to 2020 by Michal Simek · 4 years, 9 months ago
- f695e1c arm64: zynqmp: Replace gpio-key,wakeup with wakeup source by Michal Simek · 4 years, 9 months ago
- 6bbe3e6 ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property by Sudeep Holla · 6 years ago
- 0b792fd ARM: dts: zc702: Fix I2C bus warnings by Quanyang Wang · 5 years ago
- 19de158 arm64: zynqmp: Enable cache command for mini mtest configuration by Michal Simek · 4 years, 9 months ago
- 74ce8f4 configs: versal: Add CONFIG_DISTRO_DEFAULTS to versal defconfig by T Karthik Reddy · 4 years, 9 months ago
- c514301 arm64: zynqmp: Print multiboot register value in EL3 by Michal Simek · 4 years, 9 months ago
- e13e7c9 arm64: dts: meson: add libretech-pc support by Jerome Brunet · 4 years, 9 months ago
- 74f50b7 arm64: dts: meson: import libretech-pc from linux v5.6-rc2 by Jerome Brunet · 4 years, 9 months ago
- dd5f235 arm64: dts: meson: sync dt and bindings from v5.6-rc2 by Jerome Brunet · 4 years, 9 months ago
- b3d69aa clk: meson: reset mmc clock on probe by Jerome Brunet · 4 years, 9 months ago
- 0392416 mmc: meson-gx: enable input clocks by Jerome Brunet · 4 years, 9 months ago
- 423aabc dt-bindings: leds: import common led bindings from linux v5.5 by Jerome Brunet · 4 years, 9 months ago
- 87a8f96 clk: meson-g12a: missing break by Heinrich Schuchardt · 4 years, 9 months ago
- 74bf17d Merge branch 'master' of git://git.denx.de/u-boot-sh by Tom Rini · 4 years, 8 months ago
- a7b86eb Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 by Tom Rini · 4 years, 8 months ago
- 9e6ce62 serial: ns16550: Fix ordering of getting base address by Bin Meng · 4 years, 8 months ago
- 4d073fa x86: acpi: Describe USB 3 host controller found on Intel Tangier by Andy Shevchenko · 4 years, 8 months ago
- d0f7ab5 x86: acpi: Add I²C timings to Intel Merrifield platform by Andy Shevchenko · 4 years, 8 months ago
- 63a6098 doc: board: verdin-imx8mm: use mainline TF-A by Igor Opaniuk · 4 years, 9 months ago
- ddcccb2 x86: acpi: Refactor XSDT handling in acpi_add_table() by Andy Shevchenko · 4 years, 9 months ago
- b13da11 net: sh_eth: Init the hardware before PHY access by Marek Vasut · 4 years, 8 months ago
- 60f1cc5 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegra by Tom Rini · 4 years, 8 months ago
- e14ba8a arch: Add explicit linker script for u-boot-elf by Michal Simek · 4 years, 8 months ago
- 7403702 mach-snapdragon: Fix overwriting last digit of serial number by Jan-Christoph Tebbe · 4 years, 8 months ago
- 9d15d1d Revert "common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled" by Ye Li · 4 years, 8 months ago
- 6aff13a Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi by Tom Rini · 4 years, 8 months ago
- 7c02bc9 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support by Tom Warren · 4 years, 9 months ago
- 808e193 mtd: spi: Add Macronix MX25U3235F device by Tom Warren · 4 years, 8 months ago
- 5dc1dc8 t210: Adjust ramdisk_addr_r/fdt_addr_r to allow for large kernels by Tom Warren · 4 years, 8 months ago
- b1747fd qspi: t210: Use dev_read calls to get FDT data like base, freq by Tom Warren · 4 years, 8 months ago
- 2fcc3ba qspi: t210: Fix QSPI clock and tap delays by Tom Warren · 5 years ago
- 3c8cf24 qspi: t210: Fix claim_bus's use of the wrong bus/device by Tom Warren · 5 years ago
- a482f32 mmc: t210: Fix 'bad' SD-card clock when doing 400KHz card detect by Tom Warren · 5 years ago
- 5e965e8 mmc: t210: Add autocal and tap/trim updates for SDMMC1/3 by Tom Warren · 5 years ago
- 224595a tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all Jetson boards by Tom Warren · 4 years, 8 months ago
- c0d436f ARM: tegra: p2771-0000: enable PIE relocation by Vishruth · 4 years, 8 months ago
- d43c1dc i2c: t210: Add VI_I2C clock source support by Tom Warren · 4 years, 8 months ago
- 48ba196 t210: pinmux: Remove pinmux/GPIO init from T210 boards by Tom Warren · 4 years, 8 months ago