Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / e04bfdacb368da1f52135926e5c18dfa126e7cb1 / include / configs
  1. 4f80d5b omap4_common: config: remove I2C for SPL mode by Nishanth Menon · 11 years ago
  2. 2efa79a dra7xx_evm: Enable GPT commands by Tom Rini · 11 years ago
  3. 0f1b044 am43xx_evm: Enable GPT commands by Tom Rini · 11 years ago
  4. 01d92b0 am335x_evm: Enable GPT commands by Tom Rini · 11 years ago
  5. bc97f48 arm: omap: cm_t35: Remove CONFIG_SYS_BOOTMAPSZ to fix FDT Linux booting by Stefan Roese · 11 years ago
  6. a5d64db OMAP3: fix default environment for mcx board by Stefano Babic · 11 years ago
  7. 9267110 OMAP3: add missing gpio clock init and fix NAND SPL for mcx board by Stefano Babic · 11 years ago
  8. 36481de arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled) by Stefan Roese · 11 years ago
  9. 072cefe Add support for B&R KWB Motherboard by Hannes Petermaier · 11 years ago
  10. 893c04e board: Add support for B&R T-Series Motherboard by Hannes Petermaier · 11 years ago
  11. da4105d am335x: Initial support for Silica Pengwyn board by Lothar Felten · 11 years ago
  12. 5c92d48 ARM: rpi_b: load /uEnv.txt from MMC at startup by Stephen Warren · 11 years ago
  13. 29235b7 ARM: rpi_b: convert to use distro defaults by Stephen Warren · 11 years ago
  14. 4c89a36 Merge branch 'master' of git://git.denx.de/u-boot-spi by Tom Rini · 11 years ago
  15. c42eb7f axs101: change command prompt marker to match marketing name of the board by Alexey Brodkin · 11 years ago
  16. 6853e6a Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 11 years ago
  17. 3e11350 Merge branch 'u-boot/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  18. f93f589 spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs by Alexey Brodkin · 11 years ago
  19. 1894863 i2c: zynq: Add support for the second i2c controller by Michael Burr · 11 years ago
  20. 2f13363 configs: Delete unused CONFIG_SYS_64BIT_{VSPRINTF, STRTOUL} by Masahiro Yamada · 11 years ago
  21. 627b73e configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE by Masahiro Yamada · 11 years ago
  22. df2f6c9 config: remove platform CONFIG_SYS_HZ definition part 3 by Masahiro Yamada · 11 years ago
  23. 0a4bce3 mini2440.h: Delete remainder of dead board by Masahiro Yamada · 11 years ago
  24. 89ba42d sandbox: enable CONFIG_CMD_FS_GENERIC by Stephen Warren · 11 years ago
  25. e7538fe Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  26. d7e269c zynq: Add support for U-BOOT SPL by Michal Simek · 11 years ago
  27. d6c9bba zynq: Implement dump clock command by Soren Brinkmann · 11 years ago
  28. 6c3e61d zynq: Provide a framework to read clock frequencies by Soren Brinkmann · 11 years ago
  29. bf83495 zynq: serial: Simplify serial driver initialization by Michal Simek · 11 years ago
  30. 427b2d4 zynq: Enable tftp put command by Michal Simek · 11 years ago
  31. ae9f489 zynq: Extend kernel image size to 20MB by Michal Simek · 11 years ago
  32. c74a944 zynq: Fix incorrect header name by Michal Simek · 11 years ago
  33. a87a0ce Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  34. ea4c7a8 am437x_epos_evm: add SPL API, QSPI, and serial flash support by Sourav Poddar · 11 years ago
  35. c4d376f Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 11 years ago
  36. 18c8358 Merge branch 'master' of git://git.denx.de/u-boot-mmc by Tom Rini · 11 years ago
  37. 9c134e1 arm/km: introduce kmsugp1 target by Gerlando Falauto · 11 years ago
  38. b1c2a7a arm/km: define fdt_high env variable and allow backwards compatibility by Gerlando Falauto · 11 years ago
  39. 7b2268b arm/km: enable FDT for km_kirwkood by Gerlando Falauto · 11 years ago
  40. 56cde17 arm/km: add CONFIG_KM_BOARD_EXTRA_ENV to default environment by Holger Brunck · 11 years ago
  41. 2a4ebef arm/km/suv31: switch to 256MB RAM by Holger Brunck · 11 years ago
  42. 3871618 zynq: Fix elf header generation by Michal Simek · 11 years ago
  43. dfa9405 zynq: Use full tftpboot command instead of shortcut tftp by Michal Simek · 11 years ago
  44. bccaa47 ARM: rpi_b: set $fdtfile in default environment by Stephen Warren · 11 years ago
  45. d53ccdb Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  46. 17998ef Merge branch 'master' of git://git.denx.de/u-boot-arm by Stefano Babic · 11 years ago
  47. 6d73c23 mx6: Enable L2 cache support by Fabio Estevam · 11 years ago
  48. 6fc049b mx6sl: Adjust fdt_addr to avoid address overlapping by Fabio Estevam · 11 years ago
  49. c0a5b08 vf610twr: Set default environment to use zImage by Otavio Salvador · 11 years ago
  50. 5ef1424 udoo: Set default environment to use zImage by Otavio Salvador · 11 years ago
  51. 8e184a5 mx6slevk: Set default environment to use zImage by Otavio Salvador · 11 years ago
  52. f2e4288 mx6sabre_common: Set default environment to use zImage by Otavio Salvador · 11 years ago
  53. 124f196 mx6qarm2: Set default environment to use zImage by Otavio Salvador · 11 years ago
  54. f28154b mx53loco: Set default environment to use zImage by Otavio Salvador · 11 years ago
  55. 20f233b mx51evk: Set default environment to use zImage by Otavio Salvador · 11 years ago
  56. fb3f917 mx28evk: Set default environment to use zImage by Otavio Salvador · 11 years ago
  57. 04585b0 mx23evk: Set default environment to use zImage by Otavio Salvador · 11 years ago
  58. 1e373df hummingboard: Set default environment to use zImage by Otavio Salvador · 11 years ago
  59. 4ac0c2b cgtqmx6eval: Set default environment to use zImage by Otavio Salvador · 11 years ago
  60. b818d9a dra7xx_evm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage by Tom Rini · 11 years ago
  61. 378ec0f omap5_uevm: Add CONFIG_SUPPORT_EMMC_BOOT, document usage by Tom Rini · 11 years ago
  62. 1a78d28 x600: Switch to CONFIG_PHYLIB by Tom Rini · 11 years ago
  63. 92a190a net/designware - switch driver to phylib usage by Alexey Brodkin · 11 years ago
  64. a7069dd arc: add AXS101 board support by Alexey Brodkin · 11 years ago
  65. 66712b8 arc: add Arcangel4 board support by Alexey Brodkin · 11 years ago
  66. 425e26d board:samsung:trats/trats2: enable boot with appended and separated DTB by Piotr Wilczek · 11 years ago
  67. 8c57fb7 board:samsung:trats2: add env variables describing platform by Piotr Wilczek · 11 years ago
  68. 943eacd board:samsung:trats: add env variables describing platform by Piotr Wilczek · 11 years ago
  69. 815a607 board:samsung:universal: add env variables describing platform by Piotr Wilczek · 11 years ago
  70. 2ac9a35 board:samsung:goni: add env variables describing platform by Piotr Wilczek · 11 years ago
  71. f016f8c usb: mv_udc: Rename to ci_udc by Marek Vasut · 11 years ago
  72. e317de6 ARM: IXP: Remove dvl_host board by Marek Vasut · 11 years ago
  73. 6ff7aaf ARM: IXP: Remove actux4 board by Marek Vasut · 11 years ago
  74. 38da33f ARM: IXP: Remove actux3 board by Marek Vasut · 11 years ago
  75. 13e0ee7 ARM: IXP: Remove actux2 board by Marek Vasut · 11 years ago
  76. 373ee04 ARM: IXP: Remove actux1 board by Marek Vasut · 11 years ago
  77. 9c1d0e9 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 11 years ago
  78. 9d24274 microblaze: Add SPL support by Michal Simek · 11 years ago
  79. 22ff7f4 microblaze: Enable buffer write for NOR flashes by Michal Simek · 11 years ago
  80. 7bc5c8c ARM: tegra: fix "bootp" issue for Tegra124 too by Jim Lin · 11 years ago
  81. f7dc4ac ARM: tegra: add Venice2 (Tegra124) board by Tom Warren · 11 years ago
  82. 09266b2 ARM: tegra: clear $usb_need_init each boot by Stephen Warren · 11 years ago
  83. b9b53a6 ARM: tegra: set env vars to indicate Cardhu A04 support by Stephen Warren · 11 years ago
  84. 47c1180 kmp204x: enable support for SPANSION SPI NOR by Valentin Longchamp · 11 years ago
  85. cf7707a KM: add the KM_UBI_PART_BOOT_OPTS #define by Valentin Longchamp · 11 years ago
  86. e95bbc8 kmp204x: add support for the kmcoge4 board by Valentin Longchamp · 11 years ago
  87. f3e74d0 kmp204x: I2C deblocking support by Rainer Boschung · 11 years ago
  88. dd21f09 kmp204x: support for QRIO1 bootcounter by Rainer Boschung · 11 years ago
  89. 714fd40 powerpc/t104xrdb: Add basic ethernet support by Priyanka Jain · 11 years ago
  90. 48aee39 powerpc/t104xrdb: Update T1042RDB.h in config folder by Prabhakar Kushwaha · 11 years ago
  91. 9b444be powerpc/t104xrdb: Update T1040RDB.h in config folder by Priyanka Jain · 11 years ago
  92. 5b7672f boards/t1040qds: Adds ethernet support for T1040 by Prabhakar Kushwaha · 11 years ago
  93. a0afc6f config: trats: trats2: extend dfu_alt_info by env update settings by Przemyslaw Marczak · 11 years ago
  94. 82b0a055 universal: add LCD download menu support by Przemyslaw Marczak · 11 years ago
  95. f64236a trats2: add LCD download menu support by Przemyslaw Marczak · 11 years ago
  96. 00e64ab trats: add LCD download menu support by Przemyslaw Marczak · 11 years ago
  97. 2df21cb samsung: boards: update display configs with 16bpp mode. by Przemyslaw Marczak · 11 years ago
  98. 903afe1 lib: tizen: change Tizen logo with the new one. by Przemyslaw Marczak · 11 years ago
  99. 679549d samsung: common: Add file for common functions, draw_logo() cleanup. by Przemyslaw Marczak · 11 years ago
  100. 8475c86 s5p: gpio: change gpio coding method for s5p gpio. by Przemyslaw Marczak · 11 years ago