- f174a0d imx: power-domain: Add fsl,imx8mn-gpc compatible string by Marek Vasut · 3 years, 8 months ago
- da16034 imx: power-domain: Add fsl,imx8mm-gpc compatible string by Marek Vasut · 3 years, 8 months ago
- d78f7d8 ARM: dts: imx8mn: Add power domain nodes by Marek Vasut · 3 years, 8 months ago
- f0e10e3 ARM: dts: imx8mm: Add power domain nodes by Marek Vasut · 3 years, 8 months ago
- 5781f46 ARM: dts: imx8mn: Replace deprecated fsl,usbphy DT props with phys by Marek Vasut · 3 years, 8 months ago
- aded940 ARM: dts: imx8mm: Replace deprecated fsl,usbphy DT props with phys by Marek Vasut · 3 years, 8 months ago
- c7eb5d2 ARM: dts: k2g-evm: Use standard compatible string for USB no-op PHY by Marek Vasut · 3 years, 8 months ago
- b31e16b arc: emsdp/iotdk: Use standard compatible string for USB no-op PHY by Marek Vasut · 3 years, 8 months ago
- 1220aa9 phy: nop-phy: Add standard usb-nop-xceiv compat string by Marek Vasut · 3 years, 8 months ago
- a6232e0 Merge branch '2021-04-14-assorted-vboot-improvements' by Tom Rini · 3 years, 7 months ago
- 45b3cf8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq by Tom Rini · 3 years, 7 months ago
- b86772e Merge https://source.denx.de/u-boot/custodians/u-boot-x86 by Tom Rini · 3 years, 7 months ago
- 20830d0 configs: T1042D4RDB: enable DM_ETH by Camelia Groza · 3 years, 8 months ago
- d640abf powerpc: dts: t1042d4rdb: add FMan v3 nodes by Camelia Groza · 3 years, 8 months ago
- 19d65d1 powerpc: dts: t1042: add QorIQ DPAA 1 FMan v3 nodes by Camelia Groza · 3 years, 8 months ago
- 143a5e0 configs: T4240RDB: enable DM_ETH by Camelia Groza · 3 years, 8 months ago
- 3a25db1 powerpc: dts: qoriq: update the mdio offsets under the second FMan v3 by Camelia Groza · 3 years, 8 months ago
- 6aa01e2 powerpc: dts: t4240rdb: add FMan v3 nodes by Camelia Groza · 3 years, 8 months ago
- e9322f6 powerpc: dts: t4240: add QorIQ DPAA 1 FMan v3 nodes by Camelia Groza · 3 years, 8 months ago
- a24990b configs: T2080RDB: enable DM_ETH by Camelia Groza · 3 years, 8 months ago
- 8092e9d board: freescale: t208xrdb: fdt fixups under DM_ETH by Camelia Groza · 3 years, 8 months ago
- 2007090 powerpc: dts: t2080rdb: add FMan v3 nodes by Camelia Groza · 3 years, 8 months ago
- aec1228 powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 nodes by Camelia Groza · 3 years, 8 months ago
- a985502 ls1012a: use default scan_dev_for_boot by Mian Yousaf Kaukab · 3 years, 8 months ago
- 9b3843f board: sl28: add config to enable console output on SER0 by Michael Walle · 3 years, 8 months ago
- 6d1ab4a board: sl28: enable DM_SERIAL by Michael Walle · 3 years, 8 months ago
- 356a338 board: sl28: move DM_* configs to Kconfig by Michael Walle · 3 years, 8 months ago
- 918c72f armv8: fsl-layerscape: spl: call spl_early_init() by Michael Walle · 3 years, 8 months ago
- 019438e armv8: fsl-layerscape: spl: add debug UART support by Michael Walle · 3 years, 8 months ago
- 8ff123a freescale: ls1021atwr: Drop use of CONFIG_RESET by Simon Glass · 3 years, 8 months ago
- 5b5dd69 doc: board: qemu-ppce500: Document eTSEC usage by Bin Meng · 3 years, 9 months ago
- f6e95af ppc: qemu: Enable eTSEC support by Bin Meng · 3 years, 9 months ago
- b339899 ppc: qemu: Create a virtual memory mapping of the platform bus by Bin Meng · 3 years, 9 months ago
- ea8971c test: dm: Add a test case for simple-bus <ranges> by Bin Meng · 3 years, 9 months ago
- 80279fa dm: core: Correctly read <ranges> of simple-bus by Bin Meng · 3 years, 9 months ago
- a081546 net: tsec: Support <reg> property from the subnode "queue-group" by Bin Meng · 3 years, 9 months ago
- 0515370 dt-bindings: net: Update Freescale TSEC to support "queue-group" by Bin Meng · 3 years, 9 months ago
- 408f056 net: tsec: Use map_physmem() directly instead of dev_remap_addr() by Bin Meng · 3 years, 9 months ago
- 534c69b test: dm: Add a case to test ofnode_phy_is_fixed_link() by Bin Meng · 3 years, 9 months ago
- ff98da0 sandbox: Add a DSA sandbox driver and unit test by Claudiu Manoil · 3 years, 9 months ago
- 3c56251 net: tsec: Use dm_eth_phy_connect() directly for the DM case by Vladimir Oltean · 3 years, 9 months ago
- ec3b97e net: phy: fixed: Support the old DT binding by Bin Meng · 3 years, 9 months ago
- d809a9d net: phy: fixed: Add the missing ending newline by Bin Meng · 3 years, 9 months ago
- af34a94 net: phy: fixed: Make driver ops static by Bin Meng · 3 years, 9 months ago
- 676fbd3 net: phy: Simplify the logic of phy_connect_fixed() by Bin Meng · 3 years, 9 months ago
- 188ff18 net: phy: xilinx: Drop #ifdef CONFIG_DM_ETH around phy_connect_gmii2rgmii() by Bin Meng · 3 years, 9 months ago
- 6c99381 net: phy: xilinx: Be compatible with live OF tree by Bin Meng · 3 years, 9 months ago
- 3407c30 net: phy: fixed: Drop #ifdef CONFIG_DM_ETH around phy_connect_fixed by Vladimir Oltean · 3 years, 9 months ago
- f27bc8a net: phy: fixed: Be compatible with live OF tree by Vladimir Oltean · 3 years, 9 months ago
- 33aad0b dm: mdio: Use ofnode_phy_is_fixed_link() API by Bin Meng · 3 years, 9 months ago
- 173c66b of: extra: Introduce ofnode_phy_is_fixed_link() API by Bin Meng · 3 years, 9 months ago
- 1c196b3 dt-bindings: net: Add the old DT bindings for "fixed-link" by Bin Meng · 3 years, 9 months ago
- 017af7f watchdog: Add booke watchdog driver by Chris Packham · 3 years, 9 months ago
- 91ee547 board/km: add support for seli8 design based on nxp ls102x by Aleksandar Gerasimovski · 3 years, 9 months ago
- a7fdac7 arm: dts: ls1028a: define QDS networking protocol combinations by Alex Marginean · 3 years, 10 months ago
- 2c32c70 pci: add Amlogic Meson Designware PCIe controller by Neil Armstrong · 3 years, 8 months ago
- c90f3d0 pci: pcie_dw_rockchip: migrate to common Designware PCIe functions by Neil Armstrong · 3 years, 8 months ago
- 1a03182 pci: pcie_dw_ti: migrate to common Designware PCIe functions by Neil Armstrong · 3 years, 8 months ago
- dfadb94 pci: add common Designware PCIe functions by Neil Armstrong · 3 years, 8 months ago
- 21296b0 x86: mtrr: Fix function descriptions by Wolfgang Wallner · 3 years, 8 months ago
- da35d7a dt-bindings: fsp: Fix Apollo Lake FSP-S devicetree bindings by Wolfgang Wallner · 3 years, 8 months ago
- fbc7774 lib/rsa: Use EVP_PKEY instead of RSA by Chan, Donald · 3 years, 8 months ago
- 033ac4e image-fit: Accept OP-TEE images when booting a FIT by Alexandru Gagniuc · 3 years, 8 months ago
- 47b6f7f image-fit: Accept IH_TYPE_FIRMWARE in fit_image_load() as valid by Alexandru Gagniuc · 3 years, 8 months ago
- 51d3a8b spl: LOAD_FIT_FULL: Support 'kernel' and 'firmware' properties by Alexandru Gagniuc · 3 years, 8 months ago
- 60138aa spl: LOAD_FIT_FULL: Relocate FDT for u-boot payloads by Alexandru Gagniuc · 3 years, 8 months ago
- 2eaae17 spl: LOAD_FIT_FULL: Do not hard-code os to IH_OS_U_BOOT by Alexandru Gagniuc · 3 years, 8 months ago
- 18fd663 spl: LOAD_FIT_FULL: Fix selection of the "fdt" node by Alexandru Gagniuc · 3 years, 8 months ago
- d442f69 common: fit: Add weak board_fit_config_name_match by Sean Anderson · 3 years, 8 months ago
- 6795c75 doc: FIT image: Update FPGA example to make use of "loadables" by Alexandru Gagniuc · 3 years, 8 months ago
- df51ae7 Kconfig: Document the limitations of the simple SPL_LOAD_FIT path by Alexandru Gagniuc · 3 years, 8 months ago
- 35f4f8e spl: fit: Support loading FPGA images from list of "loadables" by Alexandru Gagniuc · 3 years, 8 months ago
- d8a3951 spl: fit: Warn if FIT contains "fpga" property in config node by Alexandru Gagniuc · 3 years, 8 months ago
- 55e7a1a spl: fit: Move FPGA loading code to separate functions by Alexandru Gagniuc · 3 years, 8 months ago
- e1662d6 doc: FIT image: Introduce "u-boot, fpga-legacy" property by Alexandru Gagniuc · 3 years, 8 months ago
- f0a6ec3 spl: fit: Don't overwrite previous loadable if "load" is missing by Alexandru Gagniuc · 3 years, 8 months ago
- 7801526 test/py: ecdsa: Use mkimage keyfile instead of keydir argument by Alexandru Gagniuc · 3 years, 9 months ago
- eb22759 lib/ecdsa: Use the 'keydir' argument from mkimage if appropriate by Alexandru Gagniuc · 3 years, 9 months ago
- 824ee74 lib/rsa: Use the 'keyfile' argument from mkimage by Alexandru Gagniuc · 3 years, 9 months ago
- 36bfcb6 mkimage: Add a 'keyfile' argument for image signing by Alexandru Gagniuc · 3 years, 9 months ago
- fb6532e doc: signature.txt: Document the keydir and keyfile arguments by Alexandru Gagniuc · 3 years, 9 months ago
- f91de32 test/py: ecdsa: Add test for mkimage ECDSA signing by Alexandru Gagniuc · 3 years, 9 months ago
- a4515f0 test/py: Add pycryptodomex to list of required pakages by Alexandru Gagniuc · 3 years, 9 months ago
- 9eef0fe doc: signature.txt: Document devicetree format for ECDSA keys by Alexandru Gagniuc · 3 years, 9 months ago
- ed6c9e0 lib: Add support for ECDSA image signing by Alexandru Gagniuc · 3 years, 9 months ago
- 4c17e5f lib/rsa: Make fdt_add_bignum() available outside of RSA code by Alexandru Gagniuc · 3 years, 9 months ago
- 0bcb28d lib: Rename rsa-checksum.c to hash-checksum.c by Alexandru Gagniuc · 3 years, 9 months ago
- 3505fa5 Merge https://source.denx.de/u-boot/custodians/u-boot-sh by Tom Rini · 3 years, 8 months ago
- 3e5f3db arm: mach-rmobile: Add CPU info support for RZ/G2 by Biju Das · 3 years, 8 months ago
- a94ab56 Merge branch '2021-04-13-assorted-improvements' by Tom Rini · 3 years, 8 months ago
- 8c4e3b7 cmd: exit: Fix return value by Marek Vasut · 3 years, 8 months ago
- 7062d4e scmi: translate the resource only when livetree is not activated by Patrick Delaunay · 3 years, 8 months ago
- 34f8fc7 gpio: Drop dm_gpio_set_dir() by Simon Glass · 3 years, 8 months ago
- a12aa79 gpio: i2c-gpio: Drop use of dm_gpio_set_dir() by Simon Glass · 3 years, 8 months ago
- 0219279 qemu: arm: select QFW, MMIO on qemu-arm by Asherah Connor · 3 years, 8 months ago
- 5830b57 qemu: add MMIO driver for QFW by Asherah Connor · 3 years, 8 months ago
- 6951255 test: qemu: add qfw sandbox driver, dm tests, qemu tests by Asherah Connor · 3 years, 8 months ago
- 5b0b43e x86: qemu: move QFW to its own uclass by Asherah Connor · 3 years, 8 months ago
- 2a3f161 scmi: correctly configure MMU for SCMI buffer by Patrick Delaunay · 3 years, 8 months ago
- dc514d7 moveconfig.py: add to the "do not process" list by Trevor Woerner · 3 years, 9 months ago