- f4dc1bc efi_loader: Cleanup get_var duplication by Ilias Apalodimas · 3 years, 8 months ago
- cd64031 doc: Update uefi documentation for initrd loading options by Ilias Apalodimas · 3 years, 8 months ago
- a1e95e3 Merge tag 'u-boot-imx-20210409' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 3 years, 7 months ago
- 2fc93e5 imx: bootaux fix elf loading by Max Krummenacher · 3 years, 8 months ago
- c174c06 pico-imx6ul: Pass the PMIC I2C address in pmic_get() by Fabio Estevam · 3 years, 9 months ago
- 8974ff1 mmc: fsl_esdhc_imx: add extra delay for IO voltage switch if necessary by Haibo Chen · 3 years, 8 months ago
- 1e595a8 mmc: fsl_esdhc_imx: remove redundant cmd11 related code. by Haibo Chen · 3 years, 8 months ago
- ba7e5db imx6: icorem6: chmod 644 enigcam.bmp by Heinrich Schuchardt · 3 years, 8 months ago
- 50ab3bd imx: imx6ull: fix pinmux sel_input value for uart5 pins by Yuichiro Goto · 3 years, 8 months ago
- 59e3d1b doc: imx: psb: Document usage of SRC_GPR10 PERSIST_SECONDARY_BOOT for A/B switching by Marek Vasut · 3 years, 8 months ago
- 3da9630 ARM: pcm058: Match mainline Linux NAND ECC layout/behaviour by Niel Fourie · 3 years, 8 months ago
- 52bbcc3 mx23_olinuxino: convert MMC to driver model by Trevor Woerner · 3 years, 8 months ago
- 123526e mx23_olinuxino: enable device tree by Trevor Woerner · 3 years, 8 months ago
- 6375657 mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output by Haibo Chen · 3 years, 9 months ago
- dec7755 ARM: imx: udoo: convert to DM_ETH by Peter Robinson · 3 years, 8 months ago
- 2d0401b ARM: imx: udoo: Convert block devices to DM by Peter Robinson · 3 years, 8 months ago
- 41a6890 ARM: imx: udoo: drop MTD config by Peter Robinson · 3 years, 8 months ago
- 999f6bf ARM: imx: udoo: Enable OF_CONTROL and DM gpio/pin control by Peter Robinson · 3 years, 8 months ago
- f3c4e3d ARM: board: udoo: Import UDOO dts files by Peter Robinson · 3 years, 8 months ago
- 05cd776 ARM: embestmx6boards: convert the mars/riot boards to DM SPI by Peter Robinson · 3 years, 8 months ago
- 2668e28 ARM: embestmx6boards: convert mars/riot boards to DM_ETH by Peter Robinson · 3 years, 8 months ago
- ed3b1d9 ARM: embestmx6boards: convert mars/riot boards to DM_USB by Peter Robinson · 3 years, 8 months ago
- c32d240 ARM: embestmx6boards: convert the mars/riot boards to DM_MMC by Peter Robinson · 3 years, 8 months ago
- 10ce58c ARM: riotboard: Enable OF_CONTROL and DM gpio/pin control by Peter Robinson · 3 years, 8 months ago
- f3bd944 ARM: embestmx6boards: merge the riotboard's configs together by Peter Robinson · 3 years, 8 months ago
- b5c6019 ARM: marsboard: Enable OF_CONTROL and DM gpio/pin control by Peter Robinson · 3 years, 8 months ago
- ebea3e0 ARM: embestmx6boards: Import the marsboard/riotboard. dts files by Peter Robinson · 3 years, 8 months ago
- 6bd8845 board: st: stm32f746-disco: fix console is not enabled while init dram by Giulio Benetti · 3 years, 8 months ago
- eeb47ee board: freescale: imxrt1050-evk: fix console is not enabled while init dram by Giulio Benetti · 3 years, 8 months ago
- 45dae4a board: freescale: imxrt1020-evk: fix console is not enabled while init dram by Giulio Benetti · 3 years, 8 months ago
- 8166bb2 configs: imx8mn_beacon: Enable QSPI Support by Adam Ford · 3 years, 8 months ago
- a5f8cc3 arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5 by Adam Ford · 3 years, 8 months ago
- f980299 ARM: board: usbarmory: Convert to OF_CONTROL and DM by Peter Robinson · 3 years, 8 months ago
- bfa0d04 ARM: board: usbarmory: Import the usbarmory dts file by Peter Robinson · 3 years, 8 months ago
- f5c2c37 board: toradex: apalis-imx8x: fix build instructions by Oleksandr Suvorov · 3 years, 8 months ago
- 5439874 apalis/colibri_imx6: remove video= settings by Oleksandr Suvorov · 3 years, 8 months ago
- fdbf0e5 colibri_imx6ull/imx7: add missing tdxargs variable by Philippe Schenker · 3 years, 8 months ago
- 3470b45 colibri_imx6: adjust boot order by Igor Opaniuk · 3 years, 8 months ago
- 72b3732 board: gateworks: venice: increase CONFIG_SYS_SPL_MALLOC_SIZE by Tim Harvey · 3 years, 9 months ago
- bb32c2a board: gateworks: venice: fix gsc_get_dev by Tim Harvey · 3 years, 9 months ago
- aeee33d MAINTAINERS: Use my personal e-mail address by Fabio Estevam · 3 years, 9 months ago
- ca3ac1e imx: ventana: enable dm for SPI by Tim Harvey · 3 years, 9 months ago
- 777f333 imx: ventana: enable dm for MTD and NAND by Tim Harvey · 3 years, 9 months ago
- 19a387f imx: ventana: enable dm support for MMC and SATA by Tim Harvey · 3 years, 9 months ago
- 72c4632 imx: ventana: enable dm support for USB by Tim Harvey · 3 years, 9 months ago
- ee025c1 imx: ventana: add pinctrl and remove unneeded UART init and config by Tim Harvey · 3 years, 9 months ago
- d863d05 imx: ventana: convert U-Boot to OF_CONTROL using FIT image by Tim Harvey · 3 years, 9 months ago
- 13acc63 arm: dts: imx6qdl-gw*: add dr_mode prop to dt to avoid error by Tim Harvey · 3 years, 9 months ago
- acb9a13 imx: ventana: add Gateworks Ventana dts by Tim Harvey · 3 years, 9 months ago
- d331cee dt-bindings: add tda1997x and bindings by Tim Harvey · 3 years, 9 months ago
- aa0032f spl: fit: nand: allow for non-page-aligned elements by Tim Harvey · 3 years, 9 months ago
- 39cb850 spl: fit: nand: skip bad block handling if NAND chip not fully defined by Tim Harvey · 3 years, 9 months ago
- 09d86ea ARM: imx: Add OCRAM_S into iMX8M MMU tables by Marek Vasut · 3 years, 9 months ago
- 8a78e31 doc: imx8mp-evk: update after using binman by Peng Fan · 3 years, 8 months ago
- 1e4ed2d imx8mp-evk: switch to use binman by Peng Fan · 3 years, 8 months ago
- 1ba917e doc: imx8mn_evk: update doc after using binman by Peng Fan · 3 years, 8 months ago
- d6afc6b imx8mn-evk: switch to use binman by Peng Fan · 3 years, 8 months ago
- 353dfe4 imx8mn-ddr4-evk: switch to use binman by Peng Fan · 3 years, 8 months ago
- a505fd3 doc: imx8mm_evk: update doc after using binman by Peng Fan · 3 years, 8 months ago
- 8996e6b imx8mm_evk: switch to use binman to pack images by Peng Fan · 3 years, 8 months ago
- 2ff17d2 crypto: fsl: refactor for 32 bit version CAAM support on ARM64 by Ye Li · 3 years, 8 months ago
- 58fc03e fsl_mfgprot: Fix typo in sign_mppubk() by Breno Lima · 3 years, 8 months ago
- 69f542c imx8: Add DEK blob encapsulation by Clement Faure · 3 years, 8 months ago
- 56d2050 imx8m: Add DEK blob encapsulation for imx8m by Clement Faure · 3 years, 8 months ago
- 613cf23 imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3 by Clement Le Marquis · 3 years, 8 months ago
- f6127db Merge https://source.denx.de/u-boot/custodians/u-boot-riscv by Tom Rini · 3 years, 8 months ago
- 8246654 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 3 years, 8 months ago
- e7bb113 riscv: dts: mpfs-icicle-kit: Drop 'clock-frequency' in the uart nodes by Bin Meng · 3 years, 8 months ago
- 53a97d2 clk: mpfs_clk: Enable DM_FLAG_PRE_RELOC flag by Bin Meng · 3 years, 8 months ago
- e9b6261 riscv: mpfs-icicle-kit: Increase SYS_MALLOC_F_LEN by Bin Meng · 3 years, 8 months ago
- 9c02e50 timer: sifive_clint: Support the official clint DT bindings by Bin Meng · 3 years, 8 months ago
- 8f0dc4c riscv: assembler versions of memcpy, memmove, memset by Heinrich Schuchardt · 3 years, 8 months ago
- f709a0b test: unit test for longjmp by Heinrich Schuchardt · 3 years, 8 months ago
- a718e2a riscv: simplify longjmp by Heinrich Schuchardt · 3 years, 8 months ago
- ae2d950 riscv: sifive: Rename fu540 board to unleashed by Bin Meng · 3 years, 8 months ago
- be5c442 configs: EXT4, FAT, hush shell, env on S-mode MAIX by Heinrich Schuchardt · 3 years, 9 months ago
- 6eef9c9 riscv: Remove unused define in maix header by Sean Anderson · 3 years, 8 months ago
- e3282b1 riscv: Enable watchdog for the k210 by Sean Anderson · 3 years, 8 months ago
- b0479d1 riscv: Add watchdog bindings for the k210 by Sean Anderson · 3 years, 8 months ago
- 97bcdd2 wdt: dw: Free the clock on error by Sean Anderson · 3 years, 8 months ago
- 4cb0ab4 wdt: dw: Enable the clock before using it by Sean Anderson · 3 years, 8 months ago
- 7d83943 wdt: dw: Switch to if(CONFIG()) instead of using #if by Sean Anderson · 3 years, 8 months ago
- cb57811 wdt: dw: Switch to using fls for log2 by Sean Anderson · 3 years, 8 months ago
- 45f39e9 crypto: caam: Add secure memory vid 3 support by Aymen Sghaier · 3 years, 8 months ago
- a018e6e crypto: caam: Fix pointer size to 32bit for i.MX8M by Aymen Sghaier · 3 years, 8 months ago
- 2532429 crypto: Add blob command support for i.MX8M platforms by Aymen Sghaier · 3 years, 8 months ago
- dde92e2 crypto: caam: Fix build warnings pointer casting by Aymen Sghaier · 3 years, 8 months ago
- 940d36d crypto: caam: Add CAAM support to i.MX8M platforms by Aymen Sghaier · 3 years, 8 months ago
- 88e7f5b imx7ulp: Enable support for cmd blob by Franck LENORMAND · 3 years, 8 months ago
- b543800 caam: enable support for iMX7ULP by Franck LENORMAND · 3 years, 8 months ago
- 68a905d crypto: caam: change JR running loop by Franck LENORMAND · 3 years, 8 months ago
- 81d5605 cmd: blob: Instantiate RNG before running CMD_BLOB by Breno Lima · 3 years, 8 months ago
- 4e682d5 cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency by Breno Lima · 3 years, 8 months ago
- c6d5809 mx6dq: hab: Fix chip version in hab.h code by Breno Lima · 3 years, 8 months ago
- e149b98 imx: cmd_dek: Enable DEK only for chips supporting CAAM by Ye Li · 3 years, 8 months ago
- 41b230b iMX8M: Add support to enable CONFIG_IMX_HAB by Ye Li · 3 years, 8 months ago
- a307981 crypto: fsl: blob: Flush dcache range for destination address by Breno Lima · 3 years, 8 months ago
- 2c0dcc5 imx: HAB: Add support for iMX8MM by Ye Li · 3 years, 8 months ago
- e449e2d imx: hab: Fix build warnings in 32-bit targets by Breno Lima · 3 years, 8 months ago
- 58f75ef mx7ulp: hab: Add hab_status command for HABv4 M4 boot by Breno Lima · 3 years, 8 months ago