Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / f73e7d67ed5accc945f4e4f24a7312826f87cab5 / include
  1. 39f0023e imx: Add support for zmx25 board by Matthias Weisser · 13 years ago
  2. 95d1858 imx: Make imx25 compatible to mxc_gpio driver and fix in tx25 by Matthias Weisser · 13 years ago
  3. 026ca65 mx31pdk: cosmetic: Fix line over 80 characters by Fabio Estevam · 13 years ago
  4. 1930b10 powerpc/mpc8548cds: Remove incorrect DDR_MSYNC_IN erratum define by Becky Bruce · 13 years ago
  5. fd48d59 Blackfin: adi boards: also set stderr to nc with helper by Mike Frysinger · 13 years ago
  6. 2757558 Blackfin: adi boards: enable pretty flash progress output by Mike Frysinger · 13 years ago
  7. c94101a Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support by Harald Krapfenbauer · 13 years ago
  8. fff18be Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings by Harald Krapfenbauer · 13 years ago
  9. 272d2fc Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR by Mike Frysinger · 14 years ago
  10. e46e815 Blackfin: adi boards: enable multi serial support by default by Mike Frysinger · 14 years ago
  11. 635f330 Blackfin: uart: add multiple serial support by Mike Frysinger · 14 years ago
  12. 68d4230 powerpc/85xx: Add default usb mode and phy type to hwconfig by Ramneek Mehresh · 13 years ago
  13. 80e5c83 powerpc/corenet_ds: add back buffer write for NOR flash by York Sun · 13 years ago
  14. 3f7f6b8 powerpc/85xx: Add basic support for P1023RDS board by Roy Zang · 13 years ago
  15. c49290c Adding more SPD registers by York Sun · 13 years ago
  16. 374a235 powerpc/85xx: Add NAND boot support for P3041/P5020DS by Shaohui Xie · 14 years ago
  17. eb51f63 qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB by Ramneek Mehresh · 14 years ago
  18. f5f30de powerpc/83xx: remove empty board_early_init_f() by Timur Tabi · 14 years ago
  19. 7fb3e7a mpc83xx: Add support for MergerBox board by Andre Schwarz · 14 years ago
  20. a7b8126 MPC83xx: add define for global half-strength enable (HSE) by Andre Schwarz · 14 years ago
  21. 7964209 Add support for Network Space v2 and parents by Simon Guinot · 13 years ago
  22. 01fa4e8 arm/km: add support for portl2 board by Valentin Longchamp · 13 years ago
  23. 83b40c3 arm/km: replace suenx targets with km_kirkwood by Holger Brunck · 13 years ago
  24. 680cfaf arm/km: use board KM_ENV_BUS for CONFIG_I2C_ENV_EEPROM_BUS by Valentin Longchamp · 13 years ago
  25. 288f99b arm/km: remove unneeded define by Holger Brunck · 13 years ago
  26. b5befd8 arm/km: fix u-boot.kwb build breakage by Holger Brunck · 13 years ago
  27. 2217865 atstk100x: switch to common cfi driver by Andreas Bießmann · 13 years ago
  28. dbbf13b cpuat91: use atmel_usart by Andreas Bießmann · 13 years ago
  29. 5a05cb7 eb_cpux9k2: use atmel_usart by Andreas Bießmann · 13 years ago
  30. 3432a93 at91rm9200ek: use atmel_usart by Andreas Bießmann · 13 years ago
  31. 6a372e9 arm920t/at91: use new clock.c features by Andreas Bießmann · 13 years ago
  32. 47c3e07 MX53: Add initial support for MX53ARD by Fabio Estevam · 13 years ago
  33. a91916f arm: Update jadecpu board by Matthias Weisser · 13 years ago
  34. 0aeb01d arm: omap2: apollon: fix broken build by Igor Grinberg · 13 years ago
  35. f84d64d arm: Tegra2: GPIO: enable GPIO for Tegra2 boards by Tom Warren · 13 years ago
  36. f310830 VCMA9: various cleanups/code style fixes by David Müller (ELSOFT AG) · 14 years ago
  37. 6d75484 VCMA9: use CFI driver (and remove the old one) by David Müller (ELSOFT AG) · 14 years ago
  38. 0bf42fe VCMA9: remove unneeded config.mk by David Müller (ELSOFT AG) · 14 years ago
  39. 8b457fa armv7: adapt omap4 to the new cache maintenance framework by Aneesh V · 13 years ago
  40. e47f2db armv7: rename cache related CONFIG flags by Aneesh V · 13 years ago
  41. 2c451f7 armv7: cache maintenance operations for armv7 by Aneesh V · 13 years ago
  42. 169d54d nand_util: drop trailing all-0xff pages if requested by Ben Gardiner · 13 years ago
  43. c135456 nand_util: treat WITH_YAFFS_OOB as a mode by Ben Gardiner · 13 years ago
  44. a6c9aa1 nand_util: convert nand_write_skip_bad() to flags by Ben Gardiner · 13 years ago
  45. 177f386 Minor coding style fixes. by Wolfgang Denk · 13 years ago
  46. 9623c15 Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 13 years ago
  47. 904ec57 update/fix PDNB3 board by Michael Schwingen · 13 years ago
  48. 973af33 update/fix IXDP425 / IXDPG425 boards by Michael Schwingen · 13 years ago
  49. 10c9787 add dvlhost (dLAN 200 AV Wireless G) board by Michael Schwingen · 13 years ago
  50. 080b764 update/fix AcTux4 board by Michael Schwingen · 13 years ago
  51. 8b5ab4c update/fix AcTux3 board by Michael Schwingen · 13 years ago
  52. af05048 update/fix AcTux2 board by Michael Schwingen · 13 years ago
  53. 517c5df update/fix AcTux1 board by Michael Schwingen · 13 years ago
  54. 566e5cf ARM: drop unsupported 'trab' board by Wolfgang Denk · 14 years ago
  55. 282e27c Build fix/update of AFEB9260 by Sergey Lapin · 13 years ago
  56. 95d50e5 cpu9260/9G20: fix board support by Eric Benard · 13 years ago
  57. 9b372b2 AT91 rework: fix TOP9000 files to build again by Reinhard Meyer · 13 years ago
  58. 8c6407f AT91 rework: fix at91sam(9260/9g20/9xe)ek board port to build again: by Reinhard Meyer · 13 years ago
  59. b8d41dd Add support for Bluewater Systems Snapper 9260/9G20 modules by Ryan Mallon · 13 years ago
  60. 8073399 update arm/at91rm9200 work with rework rework110202 by Jens Scharsig · 14 years ago
  61. fc97102 mx31pdk: Add DHCP command by Fabio Estevam · 13 years ago
  62. 953ee4d imx31_phycore: Fix build by using new relocation scheme by Fabio Estevam · 13 years ago
  63. e845f90 mx1ads: Fix build by using new relocation scheme by Fabio Estevam · 13 years ago
  64. 22a9ea9 MX31: QONG: drop config.mk by Stefano Babic · 13 years ago
  65. 154f534 omap730p2: fix build breaks by Aneesh V · 13 years ago
  66. 3712982 omap2420h4: fix build breaks by Aneesh V · 13 years ago
  67. 574fa1f omap1610inn: fix build breaks by Aneesh V · 13 years ago
  68. 56ccd36 omap1510inn: fix build breaks by Aneesh V · 13 years ago
  69. 0f33ef9 omap5912osk: fix build breaks by Aneesh V · 13 years ago
  70. d59772e omap1610h2: fix build breaks by Aneesh V · 13 years ago
  71. 9571865 Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 13 years ago
  72. 43f13e4 imx27lite: Remove local config.mk by Fabio Estevam · 13 years ago
  73. ba8dcca mx31ads: Fix environment location on flash by Felix Radensky · 13 years ago
  74. ac88e66 imx31_litekit: Remove local config.mk by Fabio Estevam · 13 years ago
  75. 4e37731 mx31litekit: Fix boot with the new relocation scheme. by Fabio Estevam · 13 years ago
  76. 4ac2e2d mx31ads: Use the new relocation scheme by Fabio Estevam · 13 years ago
  77. ba5c122 Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update embedded env settings by Harald Krapfenbauer · 13 years ago
  78. 1b48f12 Blackfin: bf548-ezkit/bf561-ezkit: update env location by Mike Frysinger · 14 years ago
  79. afbf889 armv7: Add support for ST-Ericsson U8500 href platform by John Rigby · 14 years ago
  80. 92ff2d8 Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT by Albert ARIBAUD · 13 years ago
  81. 8612b70 arm/km: update mgcoge3un board support by Holger Brunck · 13 years ago
  82. 68d6963 arm/km: rename mgcoge2un to mgcoge3un by Valentin Longchamp · 13 years ago
  83. 3d3c709 arm/km: add second serial interface for kirkwood by Holger Brunck · 13 years ago
  84. 95e3979 arm/km: disable ls (through jffs2 support) by Valentin Longchamp · 13 years ago
  85. 22c67d0 arm/km: introduce bootcount env variable and clean km_arm by Valentin Longchamp · 13 years ago
  86. ea616d4 arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file by Valentin Longchamp · 13 years ago
  87. b84ac38 arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h by Valentin Longchamp · 13 years ago
  88. e21185b ARMV7: Add support for Samsung SMDKV310 Board by Chander Kashyap · 13 years ago
  89. d0b375f SMDK2410: various cleanup/code style fixes by David Müller (ELSOFT AG) · 14 years ago
  90. a5ec7f6 SMDK2410: use the CFI driver (and remove the old one) by David Müller (ELSOFT AG) · 14 years ago
  91. 4479fc5 SMDK2410: remove unneeded config.mk by David Müller (ELSOFT AG) · 14 years ago
  92. b9f1590 SMDK2410: activate ARM relocation feature by David Müller (ELSOFT AG) · 14 years ago
  93. d2d9457 VCMA9: use ARM relocation feature to fix build error by David Müller (ELSOFT AG) · 14 years ago
  94. b302b15 MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files. by Fabio Estevam · 14 years ago
  95. c02d828 MX51: vision2: Fix build for vision2 board. by Fabio Estevam · 14 years ago
  96. 860b32e MX53: Add initial support for MX53SMD board. by Fabio Estevam · 14 years ago
  97. 938080d MX53: support for freescale MX53LOCO board by Jason Liu · 14 years ago
  98. 464bed5 mx5: Fix CONFIG_OF_LIBFDT redefined warning by Shawn Guo · 14 years ago
  99. b78b40f mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition by Shawn Guo · 14 years ago
  100. e89f1f9 mx31pdk: Clean up mx31pdk.h file by Fabio Estevam · 14 years ago