blob: 486787e1479694b9c52c94084afc1c71eb3eb449 [file] [log] [blame]
Michal Simek76316a32007-03-11 13:42:58 +01001/*
Michal Simek4aecfb12010-08-02 14:20:28 +02002 * (C) Copyright 2007-2010 Michal Simek
Michal Simek76316a32007-03-11 13:42:58 +01003 *
Michal Simekcb1bc632007-09-24 00:30:42 +02004 * Michal SIMEK <monstr@monstr.eu>
Michal Simek76316a32007-03-11 13:42:58 +01005 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Michal Simek76316a32007-03-11 13:42:58 +01007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
Michal Simek52a822e2008-12-19 13:14:05 +010012#include "../board/xilinx/microblaze-generic/xparameters.h"
Michal Simek76316a32007-03-11 13:42:58 +010013
Michal Simek4aecfb12010-08-02 14:20:28 +020014/* MicroBlaze CPU */
15#define CONFIG_MICROBLAZE 1
Michal Simek1a50f1642007-05-08 14:52:52 +020016#define MICROBLAZE_V5 1
Michal Simek76316a32007-03-11 13:42:58 +010017
Stephan Linz920c3582012-07-04 22:25:30 +020018/* Open Firmware DTS */
19#define CONFIG_OF_CONTROL 1
20#define CONFIG_OF_EMBED 1
Stephen Warren6697d552013-07-24 10:09:17 -070021#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic
Stephan Linz920c3582012-07-04 22:25:30 +020022
Stephan Linzbcec8f42012-07-29 00:25:36 +020023/* linear and spi flash memory */
Stephan Linz1fe7e8f2012-06-27 00:28:25 +020024#ifdef XILINX_FLASH_START
25#define FLASH
Stephan Linzbcec8f42012-07-29 00:25:36 +020026#undef SPIFLASH
27#undef RAMENV /* hold environment in flash */
28#else
29#ifdef XILINX_SPI_FLASH_BASEADDR
30#undef FLASH
31#define SPIFLASH
Stephan Linz1fe7e8f2012-06-27 00:28:25 +020032#undef RAMENV /* hold environment in flash */
33#else
34#undef FLASH
Stephan Linzbcec8f42012-07-29 00:25:36 +020035#undef SPIFLASH
Stephan Linz1fe7e8f2012-06-27 00:28:25 +020036#define RAMENV /* hold environment in RAM */
37#endif
Stephan Linzbcec8f42012-07-29 00:25:36 +020038#endif
Stephan Linz1fe7e8f2012-06-27 00:28:25 +020039
Michal Simek76316a32007-03-11 13:42:58 +010040/* uart */
Michal Simekaf7ae1a2008-03-28 12:13:03 +010041#ifdef XILINX_UARTLITE_BASEADDR
Michal Simek4aecfb12010-08-02 14:20:28 +020042# define CONFIG_XILINX_UARTLITE
43# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
44# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
45# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
46# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
Michal Simeke7d591e2008-11-24 11:43:00 +010047#elif XILINX_UART16550_BASEADDR
Michal Simek4aecfb12010-08-02 14:20:28 +020048# define CONFIG_SYS_NS16550 1
49# define CONFIG_SYS_NS16550_SERIAL
Stephan Linz1de55ef2011-11-24 12:32:52 +000050# if defined(__MICROBLAZEEL__)
51# define CONFIG_SYS_NS16550_REG_SIZE -4
52# else
53# define CONFIG_SYS_NS16550_REG_SIZE 4
54# endif
Michal Simek4aecfb12010-08-02 14:20:28 +020055# define CONFIG_CONS_INDEX 1
56# define CONFIG_SYS_NS16550_COM1 \
Stephan Linz1de55ef2011-11-24 12:32:52 +000057 ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
Michal Simek4aecfb12010-08-02 14:20:28 +020058# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
59# define CONFIG_BAUDRATE 115200
Michal Simeke7d591e2008-11-24 11:43:00 +010060
Michal Simek4aecfb12010-08-02 14:20:28 +020061/* The following table includes the supported baudrates */
62# define CONFIG_SYS_BAUDRATE_TABLE \
63 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
64# define CONSOLE_ARG "console=console=ttyS0,115200\0"
Michal Simeke7d591e2008-11-24 11:43:00 +010065#else
Michal Simek4aecfb12010-08-02 14:20:28 +020066# error Undefined uart
Michal Simekaf7ae1a2008-03-28 12:13:03 +010067#endif
Michal Simek76316a32007-03-11 13:42:58 +010068
69/* setting reset address */
Wolfgang Denk14d0a022010-10-07 21:51:12 +020070/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
Michal Simek76316a32007-03-11 13:42:58 +010071
Michal Simek17980492007-03-26 01:39:07 +020072/* ethernet */
Michal Simek1252df02011-02-28 10:16:09 +010073#undef CONFIG_SYS_ENET
Stephan Linz8422a352012-02-25 00:48:32 +000074#if defined(XILINX_EMACLITE_BASEADDR)
75# define CONFIG_XILINX_EMACLITE 1
Michal Simek4aecfb12010-08-02 14:20:28 +020076# define CONFIG_SYS_ENET
Stephan Linz8422a352012-02-25 00:48:32 +000077#endif
78#if defined(XILINX_LLTEMAC_BASEADDR)
79# define CONFIG_XILINX_LL_TEMAC 1
Michal Simek4aecfb12010-08-02 14:20:28 +020080# define CONFIG_SYS_ENET
Michal Simeke5845e22008-03-28 11:04:01 +010081#endif
Michal Simeke6341382011-08-31 11:51:50 +020082#if defined(XILINX_AXIEMAC_BASEADDR)
83# define CONFIG_XILINX_AXIEMAC 1
84# define CONFIG_SYS_ENET
85#endif
Michal Simek330e5542008-12-19 13:25:55 +010086
Michal Simeke5845e22008-03-28 11:04:01 +010087#undef ET_DEBUG
Michal Simek17980492007-03-26 01:39:07 +020088
Michal Simek76316a32007-03-11 13:42:58 +010089/* gpio */
Michal Simek4c6a6f02008-03-28 11:22:48 +010090#ifdef XILINX_GPIO_BASEADDR
Michal Simek4e779ad2013-04-24 10:01:20 +020091# define CONFIG_XILINX_GPIO
Michal Simek4aecfb12010-08-02 14:20:28 +020092# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
Michal Simek4c6a6f02008-03-28 11:22:48 +010093#endif
Michal Simek76316a32007-03-11 13:42:58 +010094
95/* interrupt controller */
Michal Simek4d49b282008-05-04 15:42:41 +020096#ifdef XILINX_INTC_BASEADDR
Michal Simek4aecfb12010-08-02 14:20:28 +020097# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
98# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
Michal Simek4d49b282008-05-04 15:42:41 +020099#endif
Michal Simek76316a32007-03-11 13:42:58 +0100100
101/* timer */
Michal Simekbcbb0462012-06-29 13:46:54 +0200102#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
Michal Simek4aecfb12010-08-02 14:20:28 +0200103# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
104# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
Michal Simek4d49b282008-05-04 15:42:41 +0200105#endif
Michal Simekbcbb0462012-06-29 13:46:54 +0200106
Michal Simek0f21f982013-04-22 11:23:16 +0200107/* watchdog */
108#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
109# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR
110# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ
111# define CONFIG_HW_WATCHDOG
112# define CONFIG_XILINX_TB_WATCHDOG
113#endif
114
Michal Simek76316a32007-03-11 13:42:58 +0100115/*
116 * memory layout - Example
Stephan Linz8f371b12012-07-01 16:44:37 +0200117 * CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200118 * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
Stephan Linz8f371b12012-07-01 16:44:37 +0200119 * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 64MB
120 *
121 * CONFIG_SYS_MONITOR_LEN = 0x40000
122 * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000
Michal Simek76316a32007-03-11 13:42:58 +0100123 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124 * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
Stephan Linz8f371b12012-07-01 16:44:37 +0200125 * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000
126 * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000
Michal Simek76316a32007-03-11 13:42:58 +0100127 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200128 * 0x1000_0000 CONFIG_SYS_SDRAM_BASE
Stephan Linz8f371b12012-07-01 16:44:37 +0200129 * MEMTEST_AREA 64kB
Michal Simek76316a32007-03-11 13:42:58 +0100130 * FREE
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200131 * 0x1200_0000 CONFIG_SYS_TEXT_BASE
Michal Simek76316a32007-03-11 13:42:58 +0100132 * U-BOOT code
133 * 0x1202_0000
134 * FREE
135 *
136 * STACK
Stephan Linz8f371b12012-07-01 16:44:37 +0200137 * 0x13EF_F000 CONFIG_SYS_MALLOC_BASE
138 * MALLOC_AREA 768kB Alloc
139 * 0x13FB_F000 CONFIG_SYS_MONITOR_BASE
Michal Simek17980492007-03-26 01:39:07 +0200140 * MONITOR_CODE 256kB Env
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200141 * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET
Michal Simek853643d2007-09-24 00:41:30 +0200142 * GLOBAL_DATA 4kB bd, gd
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143 * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
Michal Simek76316a32007-03-11 13:42:58 +0100144 */
145
146/* ddr sdram - main memory */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
148#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
149#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
150#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
Michal Simek76316a32007-03-11 13:42:58 +0100151
152/* global pointer */
Michal Simek32556442007-04-21 21:07:22 +0200153/* start of global data */
Michal Simek4aecfb12010-08-02 14:20:28 +0200154#define CONFIG_SYS_GBL_DATA_OFFSET \
Michal Simek10202862010-12-21 09:32:44 +0100155 (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE)
Michal Simek76316a32007-03-11 13:42:58 +0100156
157/* monitor code */
Michal Simek4aecfb12010-08-02 14:20:28 +0200158#define SIZE 0x40000
Michal Simek10202862010-12-21 09:32:44 +0100159#define CONFIG_SYS_MONITOR_LEN SIZE
Michal Simek4aecfb12010-08-02 14:20:28 +0200160#define CONFIG_SYS_MONITOR_BASE \
Michal Simek10202862010-12-21 09:32:44 +0100161 (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
162 - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
Michal Simek4aecfb12010-08-02 14:20:28 +0200163#define CONFIG_SYS_MONITOR_END \
164 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
Stephan Linz7cfb13a2012-06-27 00:28:26 +0200165#define CONFIG_SYS_MALLOC_LEN (SIZE * 3)
Michal Simek4aecfb12010-08-02 14:20:28 +0200166#define CONFIG_SYS_MALLOC_BASE \
167 (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
Michal Simek76316a32007-03-11 13:42:58 +0100168
169/* stack */
Graeme Smecher8fe7b292009-12-07 08:09:57 -0800170#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
Michal Simek76316a32007-03-11 13:42:58 +0100171
Stephan Linz8f371b12012-07-01 16:44:37 +0200172/*
173 * CFI flash memory layout - Example
174 * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
175 * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
176 *
177 * SECT_SIZE = 0x20000; 128kB is one sector
178 * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
179 *
180 * 0x2200_0000 CONFIG_SYS_FLASH_BASE
181 * FREE 256kB
182 * 0x2204_0000 CONFIG_ENV_ADDR
183 * ENV_AREA 128kB
184 * 0x2206_0000
185 * FREE
186 * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
187 *
188 */
189
Michal Simek76316a32007-03-11 13:42:58 +0100190#ifdef FLASH
Michal Simek4aecfb12010-08-02 14:20:28 +0200191# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
192# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
193# define CONFIG_SYS_FLASH_CFI 1
194# define CONFIG_FLASH_CFI_DRIVER 1
195/* ?empty sector */
196# define CONFIG_SYS_FLASH_EMPTY_INFO 1
197/* max number of memory banks */
198# define CONFIG_SYS_MAX_FLASH_BANKS 1
199/* max number of sectors on one chip */
200# define CONFIG_SYS_MAX_FLASH_SECT 512
201/* hardware flash protection */
202# define CONFIG_SYS_FLASH_PROTECTION
Michal Simek22ff7f42014-01-21 07:26:58 +0100203/* use buffered writes (20x faster) */
204# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
Michal Simek4aecfb12010-08-02 14:20:28 +0200205# ifdef RAMENV
206# define CONFIG_ENV_IS_NOWHERE 1
207# define CONFIG_ENV_SIZE 0x1000
208# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
Michal Simek76316a32007-03-11 13:42:58 +0100209
Stephan Linzbcec8f42012-07-29 00:25:36 +0200210# else /* FLASH && !RAMENV */
Michal Simek4aecfb12010-08-02 14:20:28 +0200211# define CONFIG_ENV_IS_IN_FLASH 1
212/* 128K(one sector) for env */
213# define CONFIG_ENV_SECT_SIZE 0x20000
214# define CONFIG_ENV_ADDR \
215 (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
216# define CONFIG_ENV_SIZE 0x20000
Stephan Linzbcec8f42012-07-29 00:25:36 +0200217# endif /* FLASH && !RAMBOOT */
Michal Simek76316a32007-03-11 13:42:58 +0100218#else /* !FLASH */
Stephan Linzbcec8f42012-07-29 00:25:36 +0200219
220#ifdef SPIFLASH
221# define CONFIG_SYS_NO_FLASH 1
222# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
223# define CONFIG_XILINX_SPI 1
224# define CONFIG_SPI 1
225# define CONFIG_SPI_FLASH 1
226# define CONFIG_SPI_FLASH_STMICRO 1
227# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
228# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
229# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS
230
231# ifdef RAMENV
232# define CONFIG_ENV_IS_NOWHERE 1
233# define CONFIG_ENV_SIZE 0x1000
234# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
235
236# else /* SPIFLASH && !RAMENV */
237# define CONFIG_ENV_IS_IN_SPI_FLASH 1
238# define CONFIG_ENV_SPI_MODE SPI_MODE_3
239# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
240# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
241/* 128K(two sectors) for env */
242# define CONFIG_ENV_SECT_SIZE 0x10000
243# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE)
244/* Warning: adjust the offset in respect of other flash content and size */
245# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
246# endif /* SPIFLASH && !RAMBOOT */
247#else /* !SPIFLASH */
248
Michal Simek4aecfb12010-08-02 14:20:28 +0200249/* ENV in RAM */
250# define CONFIG_SYS_NO_FLASH 1
251# define CONFIG_ENV_IS_NOWHERE 1
252# define CONFIG_ENV_SIZE 0x1000
253# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
Stephan Linzbcec8f42012-07-29 00:25:36 +0200254#endif /* !SPIFLASH */
Michal Simek76316a32007-03-11 13:42:58 +0100255#endif /* !FLASH */
256
Michal Simek853643d2007-09-24 00:41:30 +0200257/* system ace */
258#ifdef XILINX_SYSACE_BASEADDR
Michal Simek4aecfb12010-08-02 14:20:28 +0200259# define CONFIG_SYSTEMACE
260/* #define DEBUG_SYSTEMACE */
261# define SYSTEMACE_CONFIG_FPGA
262# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
263# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
264# define CONFIG_DOS_PARTITION
Michal Simek853643d2007-09-24 00:41:30 +0200265#endif
266
Michal Simeke9b737d2009-01-05 13:29:32 +0100267#if defined(XILINX_USE_ICACHE)
Michal Simek4aecfb12010-08-02 14:20:28 +0200268# define CONFIG_ICACHE
Michal Simeke9b737d2009-01-05 13:29:32 +0100269#else
Michal Simek4aecfb12010-08-02 14:20:28 +0200270# undef CONFIG_ICACHE
Michal Simeke9b737d2009-01-05 13:29:32 +0100271#endif
272
273#if defined(XILINX_USE_DCACHE)
Michal Simek4aecfb12010-08-02 14:20:28 +0200274# define CONFIG_DCACHE
Michal Simeke9b737d2009-01-05 13:29:32 +0100275#else
Michal Simek4aecfb12010-08-02 14:20:28 +0200276# undef CONFIG_DCACHE
Michal Simeke9b737d2009-01-05 13:29:32 +0100277#endif
278
Michal Simek58118302012-09-25 10:13:35 +0200279#ifndef XILINX_DCACHE_BYTE_SIZE
280#define XILINX_DCACHE_BYTE_SIZE 32768
281#endif
282
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500283/*
Jon Loeliger079a1362007-07-10 10:12:10 -0500284 * BOOTP options
285 */
286#define CONFIG_BOOTP_BOOTFILESIZE
287#define CONFIG_BOOTP_BOOTPATH
288#define CONFIG_BOOTP_GATEWAY
289#define CONFIG_BOOTP_HOSTNAME
Michal Simek76316a32007-03-11 13:42:58 +0100290
Jon Loeliger079a1362007-07-10 10:12:10 -0500291/*
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500292 * Command line configuration.
293 */
294#include <config_cmd_default.h>
295
296#define CONFIG_CMD_ASKENV
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500297#define CONFIG_CMD_IRQ
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500298#define CONFIG_CMD_MFSL
Michal Simek330e5542008-12-19 13:25:55 +0100299#define CONFIG_CMD_ECHO
Michal Simek4e779ad2013-04-24 10:01:20 +0200300#define CONFIG_CMD_GPIO
Michal Simek4d49b282008-05-04 15:42:41 +0200301
Michal Simeke9b737d2009-01-05 13:29:32 +0100302#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
Michal Simek4aecfb12010-08-02 14:20:28 +0200303# define CONFIG_CMD_CACHE
Michal Simeke9b737d2009-01-05 13:29:32 +0100304#else
Michal Simek4aecfb12010-08-02 14:20:28 +0200305# undef CONFIG_CMD_CACHE
Michal Simeke9b737d2009-01-05 13:29:32 +0100306#endif
307
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200308#ifndef CONFIG_SYS_ENET
Michal Simek4aecfb12010-08-02 14:20:28 +0200309# undef CONFIG_CMD_NET
Michal Simek1252df02011-02-28 10:16:09 +0100310# undef CONFIG_CMD_NFS
Michal Simek4d49b282008-05-04 15:42:41 +0200311#else
Michal Simek4aecfb12010-08-02 14:20:28 +0200312# define CONFIG_CMD_PING
313# define CONFIG_CMD_DHCP
Stephan Linz4eb29cf2012-01-21 22:02:57 +0100314# define CONFIG_CMD_TFTPPUT
Michal Simek4d49b282008-05-04 15:42:41 +0200315#endif
Michal Simek853643d2007-09-24 00:41:30 +0200316
317#if defined(CONFIG_SYSTEMACE)
Michal Simek4aecfb12010-08-02 14:20:28 +0200318# define CONFIG_CMD_EXT2
319# define CONFIG_CMD_FAT
Michal Simek853643d2007-09-24 00:41:30 +0200320#endif
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500321
322#if defined(FLASH)
Michal Simek4aecfb12010-08-02 14:20:28 +0200323# define CONFIG_CMD_ECHO
324# define CONFIG_CMD_FLASH
325# define CONFIG_CMD_IMLS
326# define CONFIG_CMD_JFFS2
Stephan Linz7cfb13a2012-06-27 00:28:26 +0200327# define CONFIG_CMD_UBI
328# undef CONFIG_CMD_UBIFS
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500329
Michal Simek4aecfb12010-08-02 14:20:28 +0200330# if !defined(RAMENV)
331# define CONFIG_CMD_SAVEENV
332# define CONFIG_CMD_SAVES
333# endif
Stephan Linzbcec8f42012-07-29 00:25:36 +0200334
335#else
336#if defined(SPIFLASH)
337# define CONFIG_CMD_SF
338
339# if !defined(RAMENV)
340# define CONFIG_CMD_SAVEENV
341# define CONFIG_CMD_SAVES
342# endif
Michal Simek853643d2007-09-24 00:41:30 +0200343#else
Michal Simek4aecfb12010-08-02 14:20:28 +0200344# undef CONFIG_CMD_IMLS
345# undef CONFIG_CMD_FLASH
346# undef CONFIG_CMD_JFFS2
Stephan Linz2cce2d32012-06-29 23:23:33 +0200347# undef CONFIG_CMD_UBI
348# undef CONFIG_CMD_UBIFS
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500349#endif
Stephan Linzbcec8f42012-07-29 00:25:36 +0200350#endif
Michal Simek76316a32007-03-11 13:42:58 +0100351
Jon Loeliger5dc11a52007-07-04 22:33:01 -0500352#if defined(CONFIG_CMD_JFFS2)
Stephan Linz7cfb13a2012-06-27 00:28:26 +0200353# define CONFIG_MTD_PARTITIONS
354#endif
355
356#if defined(CONFIG_CMD_UBIFS)
357# define CONFIG_CMD_UBI
358# define CONFIG_LZO
359#endif
360
361#if defined(CONFIG_CMD_UBI)
362# define CONFIG_MTD_PARTITIONS
363# define CONFIG_RBTREE
364#endif
365
366#if defined(CONFIG_MTD_PARTITIONS)
367/* MTD partitions */
Stefan Roese68d7d652009-03-19 13:30:36 +0100368#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
Stefan Roese942556a2009-05-12 14:32:58 +0200369#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
370#define CONFIG_FLASH_CFI_MTD
Stephan Linzc82a5412010-06-21 22:58:10 +0200371#define MTDIDS_DEFAULT "nor0=flash-0"
Michal Simek144876a2007-04-24 23:01:02 +0200372
373/* default mtd partition table */
Stephan Linzc82a5412010-06-21 22:58:10 +0200374#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\
Michal Simek144876a2007-04-24 23:01:02 +0200375 "256k(env),3m(kernel),1m(romfs),"\
376 "1m(cramfs),-(jffs2)"
377#endif
378
Michal Simek76316a32007-03-11 13:42:58 +0100379/* Miscellaneous configurable options */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200380#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
Michal Simek4aecfb12010-08-02 14:20:28 +0200381/* size of console buffer */
382#define CONFIG_SYS_CBSIZE 512
383 /* print buffer size */
384#define CONFIG_SYS_PBSIZE \
385 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
386/* max number of command args */
387#define CONFIG_SYS_MAXARGS 15
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200388#define CONFIG_SYS_LONGHELP
Michal Simek4aecfb12010-08-02 14:20:28 +0200389/* default load address */
390#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
Michal Simek76316a32007-03-11 13:42:58 +0100391
Michal Simek330e5542008-12-19 13:25:55 +0100392#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
Michal Simek76316a32007-03-11 13:42:58 +0100393#define CONFIG_BOOTARGS "root=romfs"
Michal Simek330e5542008-12-19 13:25:55 +0100394#define CONFIG_HOSTNAME XILINX_BOARD_NAME
Michal Simek853643d2007-09-24 00:41:30 +0200395#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
Michal Simek76316a32007-03-11 13:42:58 +0100396#define CONFIG_IPADDR 192.168.0.3
Michal Simek853643d2007-09-24 00:41:30 +0200397#define CONFIG_SERVERIP 192.168.0.5
398#define CONFIG_GATEWAYIP 192.168.0.1
Michal Simek76316a32007-03-11 13:42:58 +0100399#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
400
401/* architecture dependent code */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200402#define CONFIG_SYS_USR_EXCEP /* user exception */
Michal Simek76316a32007-03-11 13:42:58 +0100403
Michal Simek0900bee2009-08-14 13:41:17 +0200404#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
Michal Simek144876a2007-04-24 23:01:02 +0200405
Michal Simek4aecfb12010-08-02 14:20:28 +0200406#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
Stephan Linzc82a5412010-06-21 22:58:10 +0200407 "nor0=flash-0\0"\
408 "mtdparts=mtdparts=flash-0:"\
Michal Simek144876a2007-04-24 23:01:02 +0200409 "256k(u-boot),256k(env),3m(kernel),"\
Michal Simek78376452010-06-10 15:46:04 +0200410 "1m(romfs),1m(cramfs),-(jffs2)\0"\
411 "nc=setenv stdout nc;"\
412 "setenv stdin nc\0" \
413 "serial=setenv stdout serial;"\
414 "setenv stdin serial\0"
Michal Simek144876a2007-04-24 23:01:02 +0200415
Michal Simek188dc162008-03-28 11:53:02 +0100416#define CONFIG_CMDLINE_EDITING
Michal Simek188dc162008-03-28 11:53:02 +0100417
Michal Simek78376452010-06-10 15:46:04 +0200418#define CONFIG_NETCONSOLE
419#define CONFIG_SYS_CONSOLE_IS_IN_ENV
420
Michal Simek0900bee2009-08-14 13:41:17 +0200421/* Use the HUSH parser */
422#define CONFIG_SYS_HUSH_PARSER
Michal Simek0900bee2009-08-14 13:41:17 +0200423
Michal Simek37e892d2010-06-25 18:05:28 +0200424/* Enable flat device tree support */
425#define CONFIG_LMB 1
426#define CONFIG_FIT 1
427#define CONFIG_OF_LIBFDT 1
428
Stephan Linz8422a352012-02-25 00:48:32 +0000429#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC)
Stephan Linzf5e5e1f2012-02-24 18:33:41 +0100430# define CONFIG_MII 1
431# define CONFIG_CMD_MII 1
432# define CONFIG_PHY_GIGE 1
433# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
434# define CONFIG_PHYLIB 1
435# define CONFIG_PHY_ATHEROS 1
436# define CONFIG_PHY_BROADCOM 1
437# define CONFIG_PHY_DAVICOM 1
438# define CONFIG_PHY_LXT 1
439# define CONFIG_PHY_MARVELL 1
440# define CONFIG_PHY_MICREL 1
441# define CONFIG_PHY_NATSEMI 1
442# define CONFIG_PHY_REALTEK 1
443# define CONFIG_PHY_VITESSE 1
444#else
445# undef CONFIG_MII
446# undef CONFIG_CMD_MII
447# undef CONFIG_PHYLIB
448#endif
449
Michal Simek9d242742014-01-21 07:30:37 +0100450/* SPL part */
451#define CONFIG_SPL
452#define CONFIG_CMD_SPL
453#define CONFIG_SPL_FRAMEWORK
454#define CONFIG_SPL_LIBCOMMON_SUPPORT
455#define CONFIG_SPL_LIBGENERIC_SUPPORT
456#define CONFIG_SPL_SERIAL_SUPPORT
457#define CONFIG_SPL_BOARD_INIT
458
459#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
460
461#define CONFIG_SPL_RAM_DEVICE
462#define CONFIG_SPL_NOR_SUPPORT
463
464/* for booting directly linux */
465#define CONFIG_SPL_OS_BOOT
466
467#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \
468 0x60000)
469#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
470 0x40000)
471#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
472 0x1000000)
473
474/* SP location before relocation, must use scratch RAM */
475/* BRAM start */
476#define CONFIG_SYS_INIT_RAM_ADDR 0x0
477/* BRAM size - will be generated */
478#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
479/* Stack pointer prior relocation, must situated at on-chip RAM */
480#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \
481 CONFIG_SYS_INIT_RAM_SIZE - \
482 GENERATED_GBL_DATA_SIZE)
483
484#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100
485
486/*
487 * The main reason to do it in this way is that MALLOC_START
488 * can't be defined - common/spl/spl.c
489 */
490#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0)
491# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \
492 CONFIG_SYS_SPL_MALLOC_SIZE)
493# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START
494#else
495# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END
496#endif
497
498/* Just for sure that there is a space for stack */
499#define CONFIG_SPL_STACK_SIZE 0x100
500
501#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
502#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
503
504#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
505 CONFIG_SYS_INIT_RAM_ADDR - \
506 GENERATED_GBL_DATA_SIZE - \
507 CONFIG_SYS_SPL_MALLOC_SIZE - \
508 CONFIG_SPL_STACK_SIZE)
509
Michal Simek76316a32007-03-11 13:42:58 +0100510#endif /* __CONFIG_H */