blob: 46955b1f1f802f969fe2b3ac973dac33fab20036 [file] [log] [blame]
/*
* (C) Copyright 2016
* Vikas Manocha, <vikas.manocha@st.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_SYS_FLASH_BASE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR 0x20050000
#ifdef CONFIG_SUPPORT_SPL
#define CONFIG_SYS_TEXT_BASE 0x08008000
#define CONFIG_SYS_LOAD_ADDR 0x08008000
#else
#define CONFIG_SYS_TEXT_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LOAD_ADDR 0xC0400000
#define CONFIG_LOADADDR 0xC0400000
#endif
/*
* Configuration of the external SDRAM memory
*/
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 8
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_ENV_SIZE (8 << 10)
#define CONFIG_STM32_FLASH
#define CONFIG_STM32X7_SERIAL
#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL (8)
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_PHY_SMSC
#define CONFIG_STM32_HSE_HZ 25000000
#define CONFIG_SYS_CLK_FREQ 200000000 /* 200 MHz */
#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
#define CONFIG_BOOTCOMMAND \
"run bootcmd_romfs"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
"bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
"bootm 0x08044000 - 0x08042000\0"
/*
* Command line configuration.
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_CMD_CACHE
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_DISPLAY_BOARDINFO
/* For SPL */
#ifdef CONFIG_SUPPORT_SPL
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_SPL_LEN 0x00008000
#define CONFIG_SYS_UBOOT_START 0x080083FD
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
CONFIG_SYS_SPL_LEN)
/* DT blob (fdt) address */
#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
0x1C0000)
#endif
/* For SPL ends */
#endif /* __CONFIG_H */