blob: 8465b5426d817d851fc14e32bf036ec61be97890 [file] [log] [blame]
if ARCH_OMAP2PLUS
choice
prompt "OMAP2+ platform select"
default OMAP34XX
config OMAP34XX
bool "OMAP34XX SoC"
select ARM_CORTEX_A8_CVE_2017_5715
select ARM_ERRATA_430973
select ARM_ERRATA_454179
select ARM_ERRATA_621766
select ARM_ERRATA_725233
select SPL_USE_TINY_PRINTF if SPL
imply NAND_OMAP_GPMC
imply SPL_FS_EXT4
imply SPL_FS_FAT
imply SPL_GPIO
imply SPL_I2C
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC
imply SPL_NAND_SUPPORT
imply SPL_OMAP3_ID_NAND
imply SPL_POWER
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
imply TWL4030_POWER
config OMAP44XX
bool "OMAP44XX SoC"
select DM_EVENT
select SPL_USE_TINY_PRINTF
select SPL_SYS_NO_VECTOR_TABLE if SPL
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
imply SPL_FS_EXT4
imply SPL_FS_FAT
imply SPL_GPIO
imply SPL_I2C
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC
imply SPL_NAND_SIMPLE
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
config OMAP54XX
bool "OMAP54XX SoC"
select ARM_CORTEX_A15_CVE_2017_5715
select ARM_ERRATA_798870
select DM_EVENT
select SYS_THUMB_BUILD
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
imply SPL_ENV_SUPPORT
imply SPL_FS_EXT4
imply SPL_FS_FAT
imply SPL_GPIO
imply SPL_I2C
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_SUPPORT
imply SPL_POWER
imply SPL_SERIAL
imply SYS_I2C_OMAP24XX
config AM43XX
bool "AM43XX SoC"
select SPECIFY_CONSOLE_INDEX
select SYS_L2_PL310 if !SYS_L2CACHE_OFF
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_DM
imply SPL_DM_SEQ_ALIAS
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_SUPPORT
imply SPL_OF_CONTROL
imply SPL_OF_TRANSLATE
imply SPL_SEPARATE_BSS
imply SPL_SYS_MALLOC_SIMPLE
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
help
Support for AM43xx SOC from Texas Instruments.
The AM43xx high performance SOC features a Cortex-A9
ARM core, a quad core PRU-ICSS for industrial Ethernet
protocols, dual camera support, optional 3D graphics
and an optional customer programmable secure boot.
config AM33XX
bool "AM33XX SoC"
select ARM_CORTEX_A8_CVE_2017_5715
select DM_EVENT
select SPECIFY_CONSOLE_INDEX
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SKIP_LOWLEVEL_INIT
imply SPL_NAND_AM33XX_BCH
imply SPL_NAND_SUPPORT
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
imply SPL_USE_TINY_PRINTF
help
Support for AM335x SOC from Texas Instruments.
The AM335x high performance SOC features a Cortex-A8
ARM core, a dual core PRU-ICSS for industrial Ethernet
protocols, optional 3D graphics and an optional customer
programmable secure boot.
endchoice
config SYS_MPUCLK
int "MPU CLK speed"
depends on AM33XX
default 500
help
Defines the MPU clock speed (in MHz).
config SYS_OMAP_ABE_SYSCK
bool
config TI_SECURE_EMIF_REGION_START
hex "Reserved EMIF region start address"
depends on TI_SECURE_DEVICE
default 0x0
help
Reserved EMIF region start address. Set to "0" to auto-select
to be at the end of the external memory region.
config TI_SECURE_EMIF_TOTAL_REGION_SIZE
hex "Reserved EMIF region size"
depends on TI_SECURE_DEVICE
default 0x0
help
Total reserved EMIF region size. Default is 0, which means no reserved EMIF
region on secure devices.
config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
hex "Size of protected region within reserved EMIF region"
depends on TI_SECURE_DEVICE
default 0x0
help
This config option is used to specify the size of the portion of the total
reserved EMIF region set aside for secure OS needs that will be protected
using hardware memory firewalls. This value must be smaller than the
TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
config SYS_AUTOMATIC_SDRAM_DETECTION
bool
choice
depends on OMAP44XX || OMAP54XX
prompt "Static or dynamic DDR timing calculations"
default SYS_EMIF_PRECALCULATED_TIMING_REGS
help
For the DDR timing information we can either dynamically determine
the timings to use or use pre-determined timings (based on using the
dynamic method). Default to the static timing information.
config SYS_EMIF_PRECALCULATED_TIMING_REGS
bool "Use precalcualted timing values"
config SYS_DEFAULT_LPDDR2_TIMINGS
bool "Use default LPDDR2 timing values"
select SYS_AUTOMATIC_SDRAM_DETECTION
endchoice
source "arch/arm/mach-omap2/omap3/Kconfig"
source "arch/arm/mach-omap2/omap4/Kconfig"
source "arch/arm/mach-omap2/omap5/Kconfig"
source "arch/arm/mach-omap2/am33xx/Kconfig"
source "board/BuR/brxre1/Kconfig"
source "board/BuR/brsmarc1/Kconfig"
source "board/BuR/brppt1/Kconfig"
source "board/siemens/draco/Kconfig"
source "board/siemens/pxm2/Kconfig"
source "board/siemens/rut/Kconfig"
source "board/ti/am43xx/Kconfig"
source "board/ti/am335x/Kconfig"
source "board/compulab/cm_t43/Kconfig"
source "board/phytec/phycore_am335x_r2/Kconfig"
endif