blob: f538d7cb838ead8d447714d4622f54755855e531 [file] [log] [blame]
if ARCH_STM32MP
config SPL
select SPL_BOARD_INIT
select SPL_CLK
select SPL_DM
select SPL_DM_SEQ_ALIAS
select SPL_DRIVERS_MISC_SUPPORT
select SPL_FRAMEWORK
select SPL_GPIO_SUPPORT
select SPL_LIBCOMMON_SUPPORT
select SPL_LIBGENERIC_SUPPORT
select SPL_OF_CONTROL
select SPL_OF_TRANSLATE
select SPL_PINCTRL
select SPL_REGMAP
select SPL_DM_RESET
select SPL_SERIAL_SUPPORT
select SPL_SPI_LOAD
select SPL_SYSCON
select SPL_WATCHDOG_SUPPORT if WATCHDOG
imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
imply SPL_LIBDISK_SUPPORT
config SYS_SOC
default "stm32mp"
config SYS_MALLOC_LEN
default 0x2000000
config ENV_SIZE
default 0x2000
config STM32MP15x
bool "Support STMicroelectronics STM32MP15x Soc"
select ARCH_SUPPORT_PSCI if !TFABOOT
select ARM_SMCCC if TFABOOT
select CPU_V7A
select CPU_V7_HAS_NONSEC if !TFABOOT
select CPU_V7_HAS_VIRT
select OF_BOARD_SETUP
select PINCTRL_STM32
select STM32_RCC
select STM32_RESET
select STM32_SERIAL
select SYS_ARCH_TIMER
imply CMD_NVEDIT_INFO
imply SYSRESET_PSCI if TFABOOT
imply SYSRESET_SYSCON if !TFABOOT
help
support of STMicroelectronics SOC STM32MP15x family
STM32MP157, STM32MP153 or STM32MP151
STMicroelectronics MPU with core ARMv7
dual core A7 for STM32MP157/3, monocore for STM32MP151
target all the STMicroelectronics board with SOC STM32MP1 family
choice
prompt "STM32MP15x board select"
optional
config TARGET_ST_STM32MP15x
bool "STMicroelectronics STM32MP15x boards"
select STM32MP15x
imply BOOTCOUNT_LIMIT
imply BOOTSTAGE
imply CMD_BOOTCOUNT
imply CMD_BOOTSTAGE
imply CMD_CLS if CMD_BMP
imply DISABLE_CONSOLE
imply PRE_CONSOLE_BUFFER
imply SILENT_CONSOLE
help
target the STMicroelectronics board with SOC STM32MP15x
managed by board/st/stm32mp1:
Evalulation board (EV1) or Discovery board (DK1 and DK2).
The difference between board are managed with devicetree
config TARGET_DH_STM32MP1_PDK2
bool "DH STM32MP1 PDK2"
select STM32MP15x
imply BOOTCOUNT_LIMIT
imply CMD_BOOTCOUNT
help
Target the DH PDK2 development kit with STM32MP15x SoM.
endchoice
config SYS_TEXT_BASE
default 0xC0100000
config NR_DRAM_BANKS
default 1
config DDR_CACHEABLE_SIZE
hex "Size of the DDR marked cacheable in pre-reloc stage"
default 0x10000000 if TFABOOT
default 0x40000000
help
Define the size of the DDR marked as cacheable in U-Boot
pre-reloc stage.
This option can be useful to avoid speculatif access
to secured area of DDR used by TF-A or OP-TEE before U-Boot
initialization.
The areas marked "no-map" in device tree should be located
before this limit: STM32_DDR_BASE + DDR_CACHEABLE_SIZE.
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
hex "Partition on MMC2 to use to load U-Boot from"
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
default 1
help
Partition on the second MMC to load U-Boot from when the MMC is being
used in raw mode
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
depends on STM32MP15x
default y
help
Say y to enable STM32 Extended TrustZone Protection
config CMD_STM32PROG
bool "command stm32prog for STM32CudeProgrammer"
select DFU
select DFU_RAM
select DFU_VIRT
select PARTITION_TYPE_GUID
imply CMD_GPT if MMC
imply CMD_MTD if MTD
imply DFU_MMC if MMC
imply DFU_MTD if MTD
help
activate a specific command stm32prog for STM32MP soc family
witch update the device with the tools STM32CubeProgrammer,
using UART with STM32 protocol or USB with DFU protocol
NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
on U-Boot DFU framework
config CMD_STM32KEY
bool "command stm32key to fuse public key hash"
default y
help
fuse public key hash in corresponding fuse used to authenticate
binary.
config PRE_CON_BUF_ADDR
default 0xC02FF000
config PRE_CON_BUF_SZ
default 4096
config BOOTSTAGE_STASH_ADDR
default 0xC3000000
if BOOTCOUNT_LIMIT
config SYS_BOOTCOUNT_SINGLEWORD
default y
# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
config SYS_BOOTCOUNT_ADDR
default 0x5C00A154
endif
if DEBUG_UART
config DEBUG_UART_BOARD_INIT
default y
# debug on UART4 by default
config DEBUG_UART_BASE
default 0x40010000
# clock source is HSI on reset
config DEBUG_UART_CLOCK
default 64000000
endif
source "board/st/stm32mp1/Kconfig"
source "board/dhelectronics/dh_stm32mp1/Kconfig"
endif