| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * DENX M28 Boot setup |
| * |
| * Copyright (C) 2019 DENX Software Engineering |
| * Lukasz Majewski, DENX Software Engineering, lukma@denx.de |
| * |
| * Copyright (C) 2018 DENX Software Engineering |
| * Måns Rullgård, DENX Software Engineering, mans@mansr.com |
| * |
| * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> |
| * on behalf of DENX Software Engineering GmbH |
| */ |
| |
| #include <common.h> |
| #include <config.h> |
| #include <asm/io.h> |
| #include <asm/arch/iomux-mx28.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) |
| #define MUX_CONFIG_BOOT (MXS_PAD_3V3 | MXS_PAD_PULLUP) |
| #define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) |
| #define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) |
| #define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP) |
| #define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_NOPULL) |
| #define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) |
| |
| const iomux_cfg_t iomux_setup[] = { |
| /* AUART0 IRDA */ |
| MX28_PAD_AUART0_RX__AUART0_RX, |
| MX28_PAD_AUART0_TX__AUART0_TX, |
| |
| /* AUART 4 RS422 */ |
| MX28_PAD_AUART0_CTS__AUART4_RX, |
| MX28_PAD_AUART0_RTS__AUART4_TX, |
| |
| /* USB0 */ |
| MX28_PAD_AUART1_CTS__USB0_OVERCURRENT, |
| MX28_PAD_AUART1_RTS__USB0_ID, |
| MX28_PAD_LCD_VSYNC__GPIO_1_28, /* PRW_On */ |
| |
| /* USB1 */ |
| MX28_PAD_PWM2__USB1_OVERCURRENT, |
| |
| /* eMMC */ |
| MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0, |
| MX28_PAD_SSP0_DETECT__GPIO_2_9, /* Reset for eMMC */ |
| MX28_PAD_SSP0_SCK__SSP0_SCK | MUX_CONFIG_SSP0, |
| |
| /* DIG Keys */ |
| MX28_PAD_GPMI_D00__GPIO_0_0, |
| MX28_PAD_GPMI_D01__GPIO_0_1, |
| MX28_PAD_GPMI_D02__GPIO_0_2, |
| MX28_PAD_GPMI_D03__GPIO_0_3, |
| MX28_PAD_GPMI_D04__GPIO_0_4, |
| MX28_PAD_GPMI_D05__GPIO_0_5, |
| MX28_PAD_GPMI_D06__GPIO_0_6, |
| MX28_PAD_GPMI_D07__GPIO_0_7, |
| |
| /* ADR_0-2 */ |
| MX28_PAD_GPMI_CE1N__GPIO_0_17, |
| MX28_PAD_GPMI_CE2N__GPIO_0_18, |
| MX28_PAD_GPMI_CE3N__GPIO_0_19, |
| |
| /* Read Keys */ |
| MX28_PAD_GPMI_RDY0__GPIO_0_20, |
| |
| /* LATCH_EN */ |
| MX28_PAD_GPMI_RDY1__GPIO_0_21, |
| |
| /* Power off */ |
| MX28_PAD_GPMI_RDN__GPIO_0_24, |
| |
| /* I2C1 Touch */ |
| MX28_PAD_AUART2_CTS__GPIO_3_10, |
| MX28_PAD_AUART2_RTS__GPIO_3_11, |
| MX28_PAD_GPMI_RDY2__GPIO_0_22, /* Touch Reset */ |
| |
| /* TIVA */ |
| MX28_PAD_AUART1_RX__SSP2_CARD_DETECT, |
| MX28_PAD_SSP2_MISO__SSP2_D0, |
| MX28_PAD_SSP2_MOSI__SSP2_CMD, |
| MX28_PAD_SSP2_SCK__SSP2_SCK, |
| MX28_PAD_SSP2_SS0__SSP2_D3, |
| MX28_PAD_SSP2_SS1__GPIO_2_20, |
| MX28_PAD_SSP2_SS2__GPIO_2_21, |
| |
| /* SPI3 NOR-Flash */ |
| MX28_PAD_AUART1_TX__SSP3_CARD_DETECT, |
| MX28_PAD_AUART2_RX__SSP3_D1, |
| MX28_PAD_AUART2_TX__SSP3_D2, |
| MX28_PAD_SSP3_MISO__SSP3_D0, |
| MX28_PAD_SSP3_MOSI__SSP3_CMD, |
| MX28_PAD_SSP3_SCK__SSP3_SCK, |
| MX28_PAD_SSP3_SS0__SSP3_D3, |
| |
| /* NOR-Flash CMD */ |
| MX28_PAD_LCD_RS__GPIO_1_26, /* Hold */ |
| MX28_PAD_LCD_WR_RWN__GPIO_1_25, /* write protect */ |
| |
| /* I2C0 Codec */ |
| MX28_PAD_I2C0_SCL__I2C0_SCL, |
| MX28_PAD_I2C0_SDA__I2C0_SDA, |
| |
| /* I2S Codec */ |
| MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK, |
| MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK, |
| MX28_PAD_SAIF0_MCLK__SAIF0_MCLK, |
| MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0, |
| MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0, |
| |
| /* PWR-Hold */ |
| MX28_PAD_SPDIF__GPIO_3_27, |
| |
| /* EMI */ |
| MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, |
| |
| MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, |
| MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, |
| |
| /* Uart3 Bluetooth-Interface */ |
| MX28_PAD_AUART3_CTS__AUART3_CTS, |
| MX28_PAD_AUART3_RTS__AUART3_RTS, |
| MX28_PAD_AUART3_RX__AUART3_RX, |
| MX28_PAD_AUART3_TX__AUART3_TX, |
| |
| /* framebuffer */ |
| MX28_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD, |
| MX28_PAD_LCD_RESET__LCD_RESET | MUX_CONFIG_LCD, |
| |
| /* DUART RS232 */ |
| MX28_PAD_PWM0__DUART_RX, |
| MX28_PAD_PWM1__DUART_TX, |
| |
| /* FEC Ethernet */ |
| MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RX_CLK__GPIO_4_13, /* Phy Interrupt */ |
| MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TX_CLK__GPIO_4_5, /* n.c. */ |
| MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET, |
| MX28_PAD_SSP1_CMD__GPIO_2_13, /* PHY reset */ |
| |
| /* TIVA boot control */ |
| MX28_PAD_GPMI_RDY3__GPIO_0_23 | MUX_CONFIG_BOOT, /* TIVA0 */ |
| MX28_PAD_GPMI_WRN__GPIO_0_25 | MUX_CONFIG_BOOT, /* TIVA1 */ |
| }; |
| |
| u32 mxs_dram_vals[] = { |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000100, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00010101, 0x01010101, |
| 0x000f0f01, 0x0f02010a, 0x00000000, 0x00010101, |
| 0x00000100, 0x00000100, 0x00000000, 0x00000002, |
| 0x01010000, 0x07080403, 0x07005303, 0x0b0000c8, |
| 0x0200a0c1, 0x0002040c, 0x0038430a, 0x04290322, |
| 0x02040203, 0x00c8002b, 0x00000000, 0x00000000, |
| 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, |
| 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, |
| 0x00000003, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000612, 0x01000102, |
| 0x06120612, 0x00000200, 0x00020007, 0xf4004a27, |
| 0xf4004a27, 0xf4004a27, 0xf4004a27, 0x07400300, |
| 0x07400300, 0x07400300, 0x07400300, 0x00000005, |
| 0x00000000, 0x00000000, 0x01000000, 0x00000000, |
| 0x00000001, 0x000f1133, 0x00000000, 0x00001f04, |
| 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, |
| 0x00001f04, 0x00001f04, 0x00001f04, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00010000, 0x00030404, |
| 0x00000002, 0x00000000, 0x00000000, 0x00000000, |
| 0x00000000, 0x00000000, 0x00000000, 0x01010000, |
| 0x01000000, 0x03030000, 0x00010303, 0x01020202, |
| 0x00000000, 0x02040101, 0x21002103, 0x00061200, |
| 0x06120612, 0x00000642, 0x00000000, 0x00000004, |
| 0x00000000, 0x00000080, 0x00000000, 0x00000000, |
| 0x00000000, 0xffffffff |
| }; |
| |
| void lowlevel_init(void) |
| { |
| struct mxs_pinctrl_regs *pinctrl_regs = |
| (struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE; |
| |
| /* Set EMI drive strength */ |
| writel(0x00003fff, &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_clr); |
| writel(0x00002aaa, &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set); |
| |
| mxs_common_spl_init(0, NULL, iomux_setup, ARRAY_SIZE(iomux_setup)); |
| } |