| /* |
| * OMAP USB HOST xHCI Controller |
| * |
| * (C) Copyright 2013 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Author: Dan Murphy <dmurphy@ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <usb.h> |
| #include <linux/errno.h> |
| #include <asm/omap_common.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #include <linux/compat.h> |
| #include <linux/usb/dwc3.h> |
| #include <linux/usb/xhci-omap.h> |
| |
| #include "xhci.h" |
| |
| /* Declare global data pointer */ |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct omap_xhci omap; |
| |
| __weak int omap_xhci_board_usb_init(int index, enum usb_init_type init) |
| { |
| enable_usb_clocks(index); |
| return 0; |
| } |
| |
| int board_usb_init(int index, enum usb_init_type init) |
| { |
| return omap_xhci_board_usb_init(index, init); |
| } |
| |
| __weak int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init) |
| { |
| disable_usb_clocks(index); |
| return 0; |
| } |
| |
| int board_usb_cleanup(int index, enum usb_init_type init) |
| { |
| return omap_xhci_board_usb_cleanup(index, init); |
| } |
| |
| static int omap_xhci_core_init(struct omap_xhci *omap) |
| { |
| int ret = 0; |
| |
| usb_phy_power(1); |
| omap_enable_phy(omap); |
| |
| ret = dwc3_core_init(omap->dwc3_reg); |
| if (ret) { |
| debug("%s:failed to initialize core\n", __func__); |
| return ret; |
| } |
| |
| /* We are hard-coding DWC3 core to Host Mode */ |
| dwc3_set_mode(omap->dwc3_reg, DWC3_GCTL_PRTCAP_HOST); |
| |
| return ret; |
| } |
| |
| static void omap_xhci_core_exit(struct omap_xhci *omap) |
| { |
| usb_phy_power(0); |
| } |
| |
| int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor) |
| { |
| struct omap_xhci *ctx = &omap; |
| int ret = 0; |
| |
| ctx->hcd = (struct xhci_hccr *)OMAP_XHCI_BASE; |
| ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET); |
| ctx->usb3_phy = (struct omap_usb3_phy *)OMAP_OCP1_SCP_BASE; |
| ctx->otg_wrapper = (struct omap_dwc_wrapper *)OMAP_OTG_WRAPPER_BASE; |
| |
| ret = board_usb_init(index, USB_INIT_HOST); |
| if (ret != 0) { |
| puts("Failed to initialize board for USB\n"); |
| return ret; |
| } |
| |
| ret = omap_xhci_core_init(ctx); |
| if (ret < 0) { |
| puts("Failed to initialize xhci\n"); |
| return ret; |
| } |
| |
| *hccr = (struct xhci_hccr *)(OMAP_XHCI_BASE); |
| *hcor = (struct xhci_hcor *)((uint32_t) *hccr |
| + HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); |
| |
| debug("omap-xhci: init hccr %x and hcor %x hc_length %d\n", |
| (uint32_t)*hccr, (uint32_t)*hcor, |
| (uint32_t)HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase))); |
| |
| return ret; |
| } |
| |
| void xhci_hcd_stop(int index) |
| { |
| struct omap_xhci *ctx = &omap; |
| |
| omap_xhci_core_exit(ctx); |
| board_usb_cleanup(index, USB_INIT_HOST); |
| } |