blob: d70658a14398782bb508d836d079ec3d48e2a77c [file] [log] [blame]
Patrick Delaunay2514c2d2018-03-12 10:46:10 +01001if ARCH_STM32MP
2
3config SPL
4 select SPL_BOARD_INIT
5 select SPL_CLK
6 select SPL_DM
7 select SPL_DM_SEQ_ALIAS
Patrick Delaunaybc061342018-07-09 15:17:21 +02008 select SPL_DRIVERS_MISC_SUPPORT
Patrick Delaunay2514c2d2018-03-12 10:46:10 +01009 select SPL_FRAMEWORK
10 select SPL_GPIO_SUPPORT
11 select SPL_LIBCOMMON_SUPPORT
12 select SPL_LIBGENERIC_SUPPORT
13 select SPL_OF_CONTROL
14 select SPL_OF_TRANSLATE
15 select SPL_PINCTRL
16 select SPL_REGMAP
Ley Foon Tanbfc6bae2018-06-14 18:45:19 +080017 select SPL_DM_RESET
Patrick Delaunay2514c2d2018-03-12 10:46:10 +010018 select SPL_SERIAL_SUPPORT
19 select SPL_SYSCON
Patrick Delaunay86634a92018-03-20 14:15:06 +010020 select SPL_DRIVERS_MISC_SUPPORT
Patrick Delaunay006ea182019-02-27 17:01:14 +010021 imply SPL_DISPLAY_PRINT
Patrick Delaunay2514c2d2018-03-12 10:46:10 +010022 imply SPL_LIBDISK_SUPPORT
23
24config SYS_SOC
25 default "stm32mp"
26
27config TARGET_STM32MP1
28 bool "Support stm32mp1xx"
Patrick Delaunayabf26782019-02-12 11:44:39 +010029 select ARCH_SUPPORT_PSCI if !STM32MP1_TRUSTED
Lokesh Vutlaacf15002018-04-26 18:21:26 +053030 select CPU_V7A
Patrick Delaunayabf26782019-02-12 11:44:39 +010031 select CPU_V7_HAS_NONSEC if !STM32MP1_TRUSTED
Patrick Delaunay41c79772018-04-16 10:13:24 +020032 select CPU_V7_HAS_VIRT
Patrick Delaunay2514c2d2018-03-12 10:46:10 +010033 select PINCTRL_STM32
Patrick Delaunayd090cba2018-07-09 15:17:20 +020034 select STM32_RCC
Patrick Delaunay2514c2d2018-03-12 10:46:10 +010035 select STM32_RESET
Andre Przywara7842b6a2018-04-12 04:24:46 +030036 select SYS_ARCH_TIMER
Patrick Delaunayabf26782019-02-12 11:44:39 +010037 imply SYSRESET_PSCI if STM32MP1_TRUSTED
38 imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
Patrick Delaunay2514c2d2018-03-12 10:46:10 +010039 help
40 target STMicroelectronics SOC STM32MP1 family
41 STMicroelectronics MPU with core ARMv7
42
Patrick Delaunayabf26782019-02-12 11:44:39 +010043config STM32MP1_TRUSTED
44 bool "Support trusted boot with TF-A"
45 default y if !SPL
46 select ARM_SMCCC
47 help
48 Say Y here to enable boot with TF-A
49 Trusted boot chain is :
50 BootRom => TF-A.stm32 (clock & DDR) => U-Boot.stm32
51 TF-A monitor provides proprietary smc to manage secure devices
52
Patrick Delaunay2514c2d2018-03-12 10:46:10 +010053config SYS_TEXT_BASE
54 prompt "U-Boot base address"
55 default 0xC0100000
56 help
57 configure the U-Boot base address
58 when DDR driver is used:
59 DDR + 1MB (0xC0100000)
60
Patrick Delaunay11dfd1a2018-03-20 10:54:54 +010061config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
62 hex "Partition on MMC2 to use to load U-Boot from"
63 depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
64 default 1
65 help
66 Partition on the second MMC to load U-Boot from when the MMC is being
67 used in raw mode
68
Patrick Delaunayf8598d92018-03-12 10:46:18 +010069source "board/st/stm32mp1/Kconfig"
70
Patrick Delaunay320d2662018-05-17 14:50:46 +020071# currently activated for debug / should be deactivated for real product
72if DEBUG_UART
73
74config DEBUG_UART_BOARD_INIT
75 default y
76
77# debug on UART4 by default
78config DEBUG_UART_BASE
79 default 0x40010000
80
81# clock source is HSI on reset
82config DEBUG_UART_CLOCK
83 default 64000000
84endif
85
Patrick Delaunay2514c2d2018-03-12 10:46:10 +010086endif