blob: 39f102f842a7250b79ac3e0aca1f71185b2834af [file] [log] [blame]
wdenk24ee89b2002-11-03 17:56:27 +00001======================================================================
wdenka1191902005-01-09 17:12:27 +00002Changes for U-Boot 1.1.3:
3======================================================================
4
wdenk12b43d52005-04-05 21:57:18 +00005* Add support for MPC8220 based "sorcery" board.
6
7* Add support for TQM8560 board.
wdenkf5c5ef42005-04-05 16:26:47 +00008
wdenk3dd7f0f2005-04-04 23:43:44 +00009* Add FEC support for TQM8540 board.
10 Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
11
12* Patch by Martin Krause, 04 Apr 2005:
13 Update default configuration for CMC_PU2 board.
14
wdenkba83a302005-04-04 12:23:03 +000015* Patch by Steven Scholz, 04 Apr 2005:
wdenk8aa1a2d2005-04-04 12:44:11 +000016 - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
17 - introduce two new configuration options instead:
18 CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
19
20* Patch by Steven Scholz, 04 Apr 2005:
wdenkba83a302005-04-04 12:23:03 +000021 Make sure that MDIO clock does not exceed 2.5 MHz on AT91
22
wdenk101e8df2005-04-04 12:08:28 +000023* Fix timer code for ARM systems: make sure that udelay() does not
24 reset timers so it's save to use udelay() in timeout code.
25
wdenk50712ba2005-04-03 23:35:57 +000026* Patch by Mathias Küster, 23 Nov 2004:
27 add udelay support for the mcf5282 cpu
28
29* Patch by Tolunay Orkun, 16 November 2004:
30 fix incorrect onboard Xilinx CPLD base address
31
wdenk901787d2005-04-03 23:22:21 +000032* Patch by Jerry Van Baren, 08 Nov 2004:
33 - Add low-boot option for MPC8260ADS board (if lowboot is selected,
34 the jumper for the HRCW source should select flash. If lowboot is
35 not selected, the jumper for the HRCW source should select the
36 BCSR.
37 - change default load base address to 0x00400000
38
wdenk8b0bfc62005-04-03 23:11:38 +000039* Patch by Yuli Barcohen, 08 Nov 2004:
40 Add support for Analogue & Micro Rattler boards.
41 Tested on Rattler8248.
42
43* Patch by Andre Renaud, 08 Nov 2004:
44 Fix watchdog support in common/lcd.c
45
46* Patch by Marc Leeman, 05 Nov 2003:
47 Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
48 bug only affects the XPC8245 processors
49
wdenk384cc682005-04-03 22:35:21 +000050* Patches by Josef Wagner, 29 Oct 2004:
51 - Add support for MicroSys CPU87 board
52 - Add support for MicroSys PM854 board
53
54* Patch by Jian Zhang, 02 Nov 2004:
55 Add 16-bit NAND support
56
wdenkc1a11c12005-04-03 21:11:16 +000057* Patch by Scott McNutt, 01 Nov 2004:
58 Add missing NIOS/NIOS2 support for "iminfo" command
59
60* Patch by Detlev Zundel, 29 Oct 2004:
61 Add missing NIOS/NIOS2 support for "mkimage" tool.
62
wdenk63153492005-04-03 20:55:38 +000063* Patch by David Adair, 27 Oct 2004:
64 Add missing 440GX SDRAM Controller reset
65
wdenk3ec924a2005-04-03 17:23:39 +000066* Patch by Steven Scholz, 25 Oct 2004:
67 Declare reset_cpu() in include/common.h instead locally
68
wdenk756f5862005-04-03 15:51:42 +000069* Patch by Yusdi Santoso, 22 Oct 2004:
70 - Add support for HIDDEN_DRAGON board
71 - fix endianess problem in driver/rtl1839.c
72
73* Patch by Allen Curtis, 21 Oct 2004:
74 support multiple serial ports
75
wdenkb1bf6f22005-04-03 14:52:59 +000076* Patch by Richard Klingler, 03 Apr 2005:
77 Add call to eth_halt() in net/net.c when called functions fail
78 after eth_init() has been called.
79
80* Patch by Sam Song, 3 April 2005:
81 - Update README.Netconsole
82 - Update README
83
wdenk400558b2005-04-02 23:52:25 +000084* Prepare for SoC rework of ARM code:
85 - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
86 - rename memsetup into lowlevel_init (function name and source files)
wdenk86c98882005-04-03 14:26:46 +000087 Patch by Steven Scholz, 03 Apr 2005:
88 - create SoC specific directories include/asm-arm/arch-imx and
89 include/asm-arm/arch-s3c24x0
wdenk400558b2005-04-02 23:52:25 +000090
wdenk414eec32005-04-02 22:37:54 +000091* Fix problems with SNTP support;
92 enable SNTP support in some boards.
93
wdenkbe6b6e42005-04-01 15:18:44 +000094* Patches by Martin Krause, 01 Apr 2005:
95 - Fix flash erase timeout on CMC_PU2
96 - Add automatic HW detection for CMC_PU2 and CMC_BASIC
wdenke6ba3c92005-04-01 09:29:14 +000097
wdenkf50cc092005-04-01 09:14:58 +000098* Patch by Steven Scholz, 13 March 2005:
99 fix cache enabling for AT91RM9200
100
wdenkea287de2005-04-01 00:25:43 +0000101* Patch by Masami Komiya, 30 Mar 2005:
102 add SNTP support and expand time server and time offset fields of
103 DHCP support. See doc/README.SNTP
104
105* Patch by Steven Scholz, 13 Dec 2004:
106 Fix bug in at91rm920 ethernet driver
107
wdenkef2807c2005-03-31 23:44:33 +0000108* Patch by Steven Scholz, 13 Dec 2004:
109 Remove duplicated code by merging memsetup.S files for
110 at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
111
wdenk83e40ba2005-03-31 18:42:15 +0000112* Patch by Detlev Zundel, 31 Mar 2005:
113 Cleanup duplicate definition of overwrite_console()
114
115* Update TQM5200 configuration;
116 prepare for Rev. 200 starter kit boards
117
wdenk0c1c117c2005-03-30 23:28:18 +0000118* Patch by Scott McNutt, 21 Oct 2004:
119 Add support for Nios-II EPCS Controller core.
120
121* Patch by Scott McNutt, 20 Oct 2004:
122 Nios-II cleanups:
123 - Add sysid command (Nios-II only).
124 - Locate default exception trampoline at proper offset.
125 - Implement I/O routines (readb, writeb, etc)
126 - Implement do_bootm_linux
127
wdenk8f0b7cb2005-03-27 23:41:39 +0000128* Patches by Martin Krause, 22 Mar 2005:
129 - use TQM5200_auto as MAKEALL target for TQM5200 systems
130 - add support for SM501 graphics controller
131 - add support for graphic console on TQM5200
132 - add support for TQM5200 Rev 200
133 - cleanup, fix typo in include/configs/TQM5200.h
134
wdenk256d31c2005-03-20 22:33:46 +0000135* Patch by Manfred Baral, 17 Mar 2005:
136 Fix typo
137
wdenke6325152005-03-17 16:43:10 +0000138* Fix RTC configuration for PPChameleon board
139
140* Cleanup, fix typo in include/configs/TQM5200.h
141
stroeseacdcd102005-03-16 20:58:31 +0000142* Patch by Stefan Roese, 16 Mar 2005:
143 Update for esd auto_update and hh405 board
144
wdenk89c02e22005-03-16 16:32:26 +0000145* Adapt for U-Boot image size (new features enabled) on TQM5200
146
wdenk6c9e7892005-03-15 22:56:53 +0000147* Update code for TQM8540 board (and 85xx in general):
148 - Change the name of the Ethernet driver: MOTO ENET -> ENET
149 - Reformat boot messages
150 - Enable redundant environment
151 - Replace the -O2 optimization flag with -mno-string
152
wdenk9d46ea42005-03-14 23:56:42 +0000153* Patch by David Brownell, 10 Mar 2005:
154 Restore copyright statements in OHCI drivers.
155
156* Add support for TQM8540 board
157
wdenkc3fafec2005-03-14 23:01:03 +0000158* Patch by Detlev Zundel, 14 Mar 2005:
159 NC650: changed NAND flash addressing to using UPMB
160
161* Patch by Stefan Roese, 14 Mar 2005:
stroesee9684a52005-03-14 12:56:21 +0000162 Update for esd voh405 fpga image
163
wdenka0bdf492005-03-14 13:14:58 +0000164* INKA4x0: Allow initialization of LCD backlight dimming from
165 "brightness" environment variable.
166
wdenkf4733a02005-03-06 01:21:30 +0000167* Add port initialization for digital I/O on INKA4x0
168
wdenkc3fafec2005-03-14 23:01:03 +0000169* Patch by Stefan Roese, 01 Mar 2005:
stroese47b1e3d2005-03-01 17:26:39 +0000170 Update for esd boards dp405 and hub405
171
wdenkb05dcb52005-03-04 11:27:31 +0000172* Fix get_partition_info() parameter error in all other calls
173 (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
174
175* Enable USB and IDE support for INKA4x0 board
176
wdenkc3fafec2005-03-14 23:01:03 +0000177* Patch by Andrew Dyer, 28 Feb 2005:
wdenkb05dcb52005-03-04 11:27:31 +0000178 fix ext2load passing an incorrect pointer to get_partition_info()
179 resulting in load failure for devices other than 0
180
wdenke58cf2a2005-02-27 23:46:58 +0000181* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
182
wdenk1968e612005-02-24 23:23:29 +0000183* Cleanup USB and partition defines
184
wdenk151ab832005-02-24 22:44:16 +0000185* Add support for ext2 filesystems and image timestamps to TQM5200 board
186
187* Add reset code for Coral-P on INKA4x0 board
188
189* Patch by Martin Krause, 28 Jun 2004:
190 Update for TRAB board.
191
192* Fix some missing "volatile"s in MPC5xxx FEC driver
193
wdenke799d372005-02-07 19:44:17 +0000194* Fix cirrus voltage detection (for CPC45)
195
wdenkf8883cb2005-02-04 15:38:08 +0000196* Fix byteorder problem in usbboot and scsiboot commands.
197
wdenk20a80412005-02-04 15:02:06 +0000198* Patch by Cajus Hahn, 04 Feb 2005:
199 - don't insist on leading '/' for filename in ext2load
200 - set default partition to useful value (1) in ext2load
201
202* Patch by Andrew Dyer, 08 Jan 2005:
203 fix wrong return codes in ext2 code
204
wdenk1a344f22005-02-03 23:00:49 +0000205* Removed '--no-warn-mismatch' option from Makefile. This option
206 makes 'ld' to overlook binary objects compatibility.
207
208* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
209 --end-group) outside of the group. This will make 'ld' to do
210 _multiple_ search in the library group when resolving symbol
211 references and do only a _single_ seach in libgcc.a after the group
212 search.
213
214* Fix stability problems on CPC45 board again.
215
216* Make image detection for diskboot / usbboot / scsiboot more robust
217 (also check header checksum)
218
wdenk436be292005-01-31 22:09:11 +0000219* Update CPC45 board configuration.
220
221* Add USB and PCI support for INKA4x0 board
222
wdenkcd172b72005-01-22 18:26:04 +0000223* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
224
wdenkc3d2b4b2005-01-22 18:13:04 +0000225* Code cleanup
226
wdenk5a95f6f2005-01-12 00:38:03 +0000227* Patch by Robin Getz, 13 Oct 2004:
228 Add standalone application to change SMC91C111 MAC addresses,
229 see examples/README.smc91111_eeprom
230
231* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
232 Fix Flash support for ARM Integrator CP.
233
wdenk289f9322005-01-12 00:15:14 +0000234* Patch by Richard Woodruff, 10 Jan 2005:
235 Update support for OMAP2420 (ARM11) and H4 board:
236 o clean up and add new types to H4 memory probe code.
237 o fix to work with internal boot.
238 o added PRCM config III operation.
239 o fix marginal flash timings.
240 o add revison ATAG usage.
241 o enable voltage scaling at power chip.
242 o fix compile error for i2c.
243
244* Fix network problem (error when receiving multiple ARP packets)
245
246* Patch by Daniel Poirot, 12 Oct 2004:
wdenk652a10c2005-01-09 23:48:14 +0000247 Add support for Wind River sbc405 board
248
249* Patch by Rainer Brestan, 12 Oct 2004:
250 Make examples/Makefile more robust
251
wdenk6225c5d2005-01-09 23:33:49 +0000252* Patch by Sam Song, 11 October 2004:
253 - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
254 - Adjust CPU:BUS frequency ratio 1:1 when core frequency
255 less than 50MHz
256
257* Patch by Sam Song, 10 Oct 2004:
258 Fix a parameter error in run_command() in main.c
259
260* Patch by Richard Woodruff, 01 Oct 2004:
wdenk8ed96042005-01-09 23:16:25 +0000261 add support for the TI OMAP2420 processor and its H4 reference
262 board
263
264* Patch by Christian Pellegrin, 24 Sep 2004:
265 Added support for NE2000 compatible (DP8390, DP83902) NICs.
266
wdenkff36fd82005-01-09 22:28:56 +0000267* Patch by Leif Lindholm, 23 Sep 2004:
268 add support for the AMD db1550 board
269
270* Patch by Travis Sawyer, 15 Sep 2004:
271 Add CONFIG_SERIAL_MULTI support for ppc4xx,
272 update README.serial_multi
273
wdenk6310eb92005-01-09 21:28:15 +0000274* Patches by David Snowdon, 07 Sep 2004:
275 - add u-boot.hex target in the top level Makefile
276 - add support for the UNSW/NICTA PLEB 2 board (pleb2)
277 - use -mtune=xscale and -march=armv5 options for PXA
278
wdenka562e1b2005-01-09 18:21:42 +0000279* Patch by Florian Schlote, 08 Sep 2004:
280 Add support for SenTec-COBRA5272-board (Coldfire).
281
wdenk30ce5ab2005-01-09 18:12:51 +0000282* Patch by Gleb Natapov, 07 Sep 2004:
283 mpc824x: set PCI latency timer to a sane value
284 (is 0 after reset).
285
286* Patch by Kurt Stremerch, 03 Sep 2004:
287 Add bitstream configuration option for fpga command (Xilinx only).
288
wdenk9dd611b2005-01-09 17:19:34 +0000289* Patch by Kurt Stremerch, 03 Sep 2004:
290 Add Xilinx Spartan2E family FPGA support
291
292* Patch by Jeff Angielski, 02 Sep 2004:
293 Add Added support for H2 revision of the EP8260 board.
294 Fixed formatting for some of the EP8260 related source files.
295
wdenka1191902005-01-09 17:12:27 +0000296* Patch by Jon Loeliger, 02 Sep 2004:
297 Reset monitor size back to 256 so environment can be written
298 to flash on MPC85xx ADS and CDS releases.
299
300* Patch by Paolo Broggini, 02 Sep 2004:
301 Make BSS clearing on ARM systems more robust
302
303* Patch by Yue Hu and Joe, 01 Sep 2004:
304 - add PCI support for ixp425;
305 - add EEPRO100 suppor tfor ixdp425 board.
306
307* Fix problem with protected sector detection in driver/cfi_flash.c
308
309======================================================================
wdenk15c7a8e2005-01-02 17:02:54 +0000310Changes for U-Boot 1.1.2:
wdenk2729af92004-05-03 20:45:30 +0000311======================================================================
312
wdenke2ffd592004-12-31 09:32:47 +0000313* Code cleanup, mostly for GCC-3.3.x
314
315* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
316 pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
317 additional ethernet addresses.
318
319* Cleanup drivers/i82365.c - avoid duplication of code
320
321* Fix bogus "cannot span across banks" flash error message
322
323* Code cleanup
324
325* Add support for CompactFlash for the CPC45 Board.
326
wdenk08f27272004-12-19 21:39:27 +0000327* Fix problems with CMC_PU2 flash driver.
328
wdenkec0aee72004-12-19 09:58:11 +0000329* Cleanup:
330 - avoid trigraph warning in fs/ext2/ext2fs.c
331 - rename UC100 -> uc100
332
wdenkf7d15722004-12-18 22:35:43 +0000333* Add support for UC100 board
334
stroese8cba19072004-12-16 18:47:58 +0000335* Patch by Stefan Roese, 16 Dez 2004:
336 - ext2fs support added
337 - Tundra universe support added
338 - Coldfire MCF5249 support added (no preloader needed!)
339 - MCF5249 board TASREG added
340 - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
341 VOM405, WUH405
342 - some esd boards updated
343 - memory commands "mdc" and "mwc" added for cyclic read/write
344 (CONFIG_MX_CYCLIC, see README for further description)
345
wdenk138ff602004-12-16 15:52:40 +0000346* Add support for INKA4X0 board
347
wdenk689aec12004-12-13 00:18:44 +0000348* Patch by Steven Scholz, 12 Dec 2004:
349 Fix typo in AT91 memory setup.
350
wdenk7e6bf352004-12-12 22:06:17 +0000351* Patch by Martin Krause, 27 Oct 2004:
352 - add support for "STK52xx" board (including PS/2 multiplexer)
353 - add hardware detection for TQM5200
354
wdenk25d67122004-12-10 11:40:40 +0000355* Clean up CMC PU2 flash driver
356
357* Update MAINTAINERS file
358
359* Fix bug in MPC823 LCD driver
360
wdenked54e622004-11-24 23:35:19 +0000361* Fix udelay() on AT91RM9200 for delays < 1 ms.
362
363* Enable long help on CMC PU2 board;
364 fix reset issue;
365 increase CPU speed from 179 to 207 MHz.
366
wdenkbb310d42004-11-22 22:20:07 +0000367* Fix smc91111 ethernet driver for Xaeniax board (need to handle
368 unaligned tail part specially).
369
wdenk9d5028c2004-11-21 00:06:33 +0000370* Update for AT91RM9200DK and CMC_PU2 boards:
371 - Enable booting directly from flash
372 - fix CMC_PU2 flash driver
373
374* Fix mkimage usage message
375
wdenkcacfab52004-11-17 20:44:20 +0000376* Map SRAM on NC650 board
377
wdenk1f6d4252004-11-02 13:00:33 +0000378* Work around for Ethernet problems on Xaeniax board
379
wdenk983fda82004-10-28 00:09:35 +0000380* Patch by TsiChung Liew, 23 Sep 2004:
381 - add support for MPC8220 CPU
382 - Add support for Alaska and Yukon boards
383
wdenke3c9b9f2004-10-24 23:54:40 +0000384* Fix configuration for ERIC board (needs more room)
385
386* Adjust MIPS compiler options at run-time depending on tools version
387 ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
388 "-mcpu=4kc" for old tools)
389
wdenk14699a22004-10-19 22:17:51 +0000390* Add passing of the command line and memory size information to the
391 kernel on xaeniax board.
392
wdenk4cfaf552004-10-11 23:03:10 +0000393* Enable NAND flash support for NC650 board.
394
395* Patch by Thomas Lange 07 Oct 2004:
396 Updated README for DBAu1x00 boards to match current status
397
wdenkd407bf52004-10-11 22:51:13 +0000398* Patch by Philippe Robin, 28 Sept 2004:
399 Fix Flash support for Versatile.
400
401* Patch by Roger Blofeld, 16 Sep 2004:
402 Fix timeout for DHCP command retry
403
wdenk2ee66532004-10-11 22:43:02 +0000404* Patch by Pantelis Antoniou, 14 Sep 2004:
405 Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
406
407* Patch by Pantelis Antoniou, 14 Sep 2004:
408 Kick watchdog when bz-decompressing
409
wdenk9455b7f2004-10-11 22:25:49 +0000410* Fix CFG_HZ problems on AT91RM9200 systems
411 [Remember: CFG_HZ should be 1000 on ALL systems!]
412
wdenke1599e82004-10-10 23:27:33 +0000413* Patch by Gridish Shlomi, 30 Aug 2004:
414 - Add support to revA version of PQ27 and PQ27E.
415 - Reverted MPC8260ADS baudrate back to original 115200
416
417* Patch by Hojin, 17 Sep 2004:
418 Fix typo in cfi_flash.c
wdenk8b74bf32004-10-11 23:10:30 +0000419
wdenke1599e82004-10-10 23:27:33 +0000420* Patch by Mark Jonas, 09 September 2004:
421 mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
422 error message
423
424* Patch by Mark Jonas, 31 August 2004:
425 Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
426 improves FTP performance for MPC5200 systems. Enabled for IceCube
427 by default.
428
wdenkc15f3122004-10-10 22:44:24 +0000429* Patch by Michael Bendzick, 30 Aug 2004:
430 - Improve platform.S code for omap1510inn that detects whether code
431 is running from SDRAM or not. Patch allows SDRAM to be configured
432 if code is running out of SRAM at 0x20000000.
433
434* Patch by Frederick Klatt, 30 Aug 2004:
435 Add support for the Wind River SBC8540/SBC8560 boards
436
wdenk656658d2004-10-10 22:16:06 +0000437* Configure SX1 board to use drivers/cfi_flash.c
438
439* Patches by Michael Bendzick, 30 Aug 2004:
440 - Configure omap1510inn board to use drivers/cfi_flash.c
441 - Make drivers/cfi_flash.c protect environment and redundant
442 environment.
443
444* Patch by Steven Scholz, 23 Jun 2004:
445 - Add script (tools/img2brec.sh) to programm U-Boot into
446 (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
447
wdenk5c952cf2004-10-10 21:27:30 +0000448* Patches by Scott McNutt, 24 Aug 2004:
449 - Add support for Altera Nios-II processors.
450 - Add support for Psyent PCI-5441 board.
451 - Add support for Psyent PK1C20 board.
452
wdenk03f5c552004-10-10 21:21:55 +0000453* Patches by Jon Loeliger, 24 Aug 2004:
454 - Add support for the MPC8541 and MPC8555 CDS boards
455 - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
456 - Convert MPC85xxADS to use common CFI flash driver
wdenkcf336782004-10-10 20:23:57 +0000457 - Fix PCI window on MPC85xx; remove unneeded PCI initialization
458 from board_early_init_f()
459 - Provide SW workaround for PCI initialization on 85xx CDS
wdenkcf336782004-10-10 20:23:57 +0000460
wdenk08b6aa62004-10-10 18:49:14 +0000461* Patches by George G. Davis, 24 Aug 2004:
462 - Enable ramdisk/initrd tagged param support for omap1610h2_config
463 - Remove static network setup defaults from mx1ads_config
wdenk731215e2004-10-10 18:41:04 +0000464 - update ARM boards to use constants from mach-types.h
465
wdenkb6508512004-10-10 18:03:33 +0000466* Patch by Gary Jennejohn, 04 Oct 2004:
467 - fix I2C on at91rm9200
468 - add support for Ricoh RS5C372A RTC
469
wdenk2cbe5712004-10-10 17:05:18 +0000470* Patch by Gary Jennejohn, 01 Oct 2004:
471 - add support for CMC PU2 board
472 - add support for I2C on at91rm9200
473
474* Patch by Gary Jennejohn, 28 Sep 2004:
475 fix baudrate handling on at91rm9200
476
wdenk659883c2004-10-09 23:33:42 +0000477* Patch by Yuli Barcohen, 22 Aug 2004:
478 - remove ZPC.1900 board-specific flash driver;
479 switch the port to generic CFI driver;
480 - port clean-up
481
wdenkf325e182004-10-09 23:28:40 +0000482* Patch by Hinko Kocevar, 21 Aug 2004:
483 Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
484
wdenk8655b6f2004-10-09 23:25:58 +0000485* Clean up tools/bmp_logo.c to not add trailing white space
486
487* Patch by Hinko Kocevar, 21 Aug 2004:
488 - Group common framebuffer functions in common/lcd.c
489 - Group common framebuffer macros and #defines in include/lcd.h
490 - Provide calc_fbsize() for video ATAG
491
wdenk30d56fa2004-10-09 22:44:59 +0000492* Patch by Sam Song, 21 August 2004:
493 - Fix a typo in README
494 - Align "(RO)" output for "flinfo" after "protect on"
495 - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
496 ratio 1:1 when core frequency less than 50MHz
497
wdenk8655b6f2004-10-09 23:25:58 +0000498* Patches by Hinko Kocevar, 21 Aug 2004:
wdenk63cfcbb2004-10-09 22:32:26 +0000499 - fix some "use of label at end of compound statement" warnings
500 - Define type of LCD panel on lubbock board if CONFIG_LCD is used
501
wdenk1d9f4102004-10-09 22:21:29 +0000502* Patch by Steven Scholz, 16 Aug 2004:
503 - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
504 - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
505 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
506 - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
507 into cpu/arm920t/$(SOC)/
508
wdenka5bbcc32004-09-29 22:55:14 +0000509* Patches by Sean Chang, 09 Aug 2004:
510 - Added support for both 8 and 16 bit mode access to System ACE CF
511 through MPU.
512 - Fixed missing System ACE CF device during get FAT partition info
513 in fat_register_device function.
514 - Enabled System ACE CF support on ML300.
515
516* Patch by Sean Chang, 09 Aug 2004:
517 Synch defines for saveenv and do_saveenv functions so they get
518 compiled under the same statement.
519
520* Patch by Sean Chang, 09 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +0000521 - Added I2C support for ML300.
522 - Added support for ML300 to read out its environment information
523 stored on the EEPROM.
524 - Added support to use board specific parameters as part of
525 U-Boot's environment information.
526 - Updated MLD files to support configuration for new features
527 above.
528
wdenka5bbcc32004-09-29 22:55:14 +0000529* Patches by Travis Sawyer, 05 Aug 2004:
wdenka06752e2004-09-29 22:43:59 +0000530 - Remove incorrect bridge settings for eth group 6
531 - Add call to setup bridge in ppc_440x_eth_initialize
532 - Fix ppc_440x_eth_init to reset the phy only if its the
533 first time through, otherwise, just check the phy for the
534 autonegotiated speed/duplex. This allows the use of netconsole
535 - only print the speed/duplex the first time the phy is reset.
536
wdenkda93ed82004-09-29 11:02:56 +0000537* Patch by Shlomo Kut, 29 Mar 2004:
538 Add support for MKS Instruments "Quantum" board
539
540* Fix build problem with Cogent boards;
541 avoid using <asm/byteorder.h> when using the host compiler
542
wdenka5725fa2004-09-28 21:51:42 +0000543* Patch by Ganapathi C, 04 Aug 2004:
544 Fix NFS timeout issue
545
wdenke1a3f6b2004-09-28 21:39:45 +0000546* Patch by Yuli Barcohen, 19 Jul 2004:
547 - Fix host tools building in Cygwin environment
548 - Fix header files search order for host tools
549
550* Patch by Tom Armistead, 19 Jul 2004:
551 Fix kgdb.S support for 74xx_75x cpu
552
wdenkc65fdc72004-09-28 21:26:26 +0000553* Patch by Jon Loeliger, 15 Jul 2004:
554 Fix MPC85xx I2C driver
555
wdenk64f70be2004-09-28 20:34:50 +0000556* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
557
wdenkcce625e2004-09-28 19:00:19 +0000558* Patch by Stephen Williams, 15 July 2004
559 Set the PCI class code for JSE board as part of PCI interface setup
560
561* Patch by Michael Bendzick, 15 Jul 2004:
562 Fix problem with writes with odd sizes in drivers/cfi_flash.c when
563 CFG_FLASH_USE_BUFFER_WRITE is set
564
wdenk66ca92a2004-09-28 17:59:53 +0000565* Patch by Yuli Barcohen, 13 Jul 2004:
566 Allow clock setting on MPC866/MPC885 series chips according to
567 environment variable `cpuclk'
568
569* Patch by Yuli Barcohen, 20 Apr 2004:
570 Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
571
wdenk4ec3a7f2004-09-28 16:44:41 +0000572* Patch by Vincent Dubey, 24 Sep 2004:
573 Add support for xaeniax board
574
wdenk79536a62004-09-27 20:20:11 +0000575* Add comment about non-GPL character of standalone applications to
576 COPYING file
577
578* Fix FEC ethernet problem on NSCU board.
579
wdenk4734cb72004-09-21 23:33:32 +0000580* Patch by Gary Jennejohn, 09 Sep 2004:
581 allow to use USART1 as console port on at91rm9200dk boards
582
stroesec3548392004-09-16 12:37:13 +0000583* Patch by Stefan Roese, 16 Sep 2004:
584 Update AR405 board.
585
wdenk1d6f9722004-09-09 17:44:35 +0000586* Fix SysClk handling for PPChameleon and CATcenter boards
587
wdenkeedcd072004-09-08 22:03:11 +0000588* Patch by Detlev Zundel, 08 Sep 2004:
589 Update etags build target
590
591* Improve NetConsole support: add support for broadcast destination
592 address and buffered input.
593
594* Cleanup compiler warnings for GCC 3.3.x and later
595
596* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
597
wdenk7ca202f2004-08-28 22:45:57 +0000598* Add support for IDS "NC650" board
599
wdenk31a64922004-08-28 21:09:14 +0000600* Add automatic update support for LWMON board
601
602* Clear Block Lock-Bits when erasing flash on LWMON board.
603
604* Fix return code of "fatload" command
605
606* Enable MSDOS/VFAT filesystem support for LWMON board
607
wdenk89394042004-08-04 21:56:49 +0000608* Patch by Martin Krause, 03 Aug 2004:
609 change timing for SM501 graphics controller on TQM5200 module
610
611* Patch by Mark Jonas, 13 July 2004:
612 - Total5200 LCD now run in little endian mode. Endianess conversion
613 is done in hardware.
wdenk7ca202f2004-08-28 22:45:57 +0000614 - Removed last reference to "console" environment variable.
wdenk89394042004-08-04 21:56:49 +0000615
wdenk429168e2004-08-02 23:39:03 +0000616* Patches by Lars Munch, 12 Jul 2004:
617 - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
618 board specific
619 - split out the LXT971A PHY from ns_9750_eth.h
620 - split the dm9161 phy part out of at91rm9200_ether.c
621
wdenk6705d812004-08-02 23:22:59 +0000622* Patch by Andreas Engel, 12 Jul 2004:
623 Replaced hardcoded PL011 clock frequency with config variable.
624 Fixed wrong CONFIG_CMD_DFL doc.
625
626* Patch by Thomas Viehweger, 09 Jun 2004:
627 make it possible to remove chpart when there is only one partition
628
wdenk68ceb292004-08-02 21:11:11 +0000629* Add support for console over UDP (compatible to Ingo Molnar's
630 netconsole patch under Linux)
631
wdenk9aea9532004-08-01 23:02:45 +0000632* Patch by Jon Loeliger, 16 Jul 2004:
633 - support larger DDR memories up to 2G on the PC8540/8560ADS and
634 STXGP3 boards
635 - Made MPC8540/8560ADS be 33Mhz PCI by default.
636 - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
637 and CONFIG_L2_INIT_RAM options.
638 - Refactor Local Bus initialization out of SDRAM setup.
639 - Re-implement new version of LBC11/DDR11 errata workarounds.
640 - Moved board specific PCI init parts out of CPU directory.
641 - Added TLB entry for PCI-1 IO Memory
642 - Updated README.mpc85xxads
643
wdenk281e00a2004-08-01 22:48:16 +0000644* Patch by Sascha Hauer, 28 Jun:
645 - add generic support for Motorola i.MX architecture
646 - add support for mx1ads, mx1fs2 and scb9328 boards
647
648* Patches by Marc Leeman, 23 Jul 2004:
649 - Add define for the PCI/Memory Buffer Configuration Register
650 - corrected comments in cpu/mpc824x/cpu_init.c
651
652* Add support for multiple serial interfaces
653 (for example to allow modem dial-in / dial-out)
654
stroese45eeb892004-07-15 14:41:43 +0000655* Patch by Stefan Roese, 15 Jul 2004:
656 cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
657
wdenkcfca5e62004-08-01 13:09:47 +0000658* Fix NSCU config; add ethernet wakeup code.
659
wdenk281e00a2004-08-01 22:48:16 +0000660* Add link for preloader for Motorola Coldfire to README.m68k
wdenkcfca5e62004-08-01 13:09:47 +0000661
wdenk75b1fa72004-07-12 22:34:51 +0000662* Patch by Michael Bendzick, 12 Jul 2004:
663 fix output formatting in drivers/cfi_flash.c
664
wdenk07cba352004-07-12 14:37:59 +0000665* Patch by Mark Jonas, 02 Jul 2004:
666 Fix lowboot (again) on MPC5xxx
667
wdenkcdc7fea2004-07-11 22:27:55 +0000668* Patch by Curt Brune, 07 Jul 2004:
669 relocate exception vectors on arm720t if needed
670
wdenka1f4a3d2004-07-11 22:19:26 +0000671* Patch by George G. Davis, 06 Jul 2004:
672 - update mach-types.h to latest arm.linux.org.uk master list
673 - Set correct OMAP1610 bi_arch_number for build target
674
675* Patch by Curt Brune, 06 Jul 2004:
676 evb4510: add support for timer interrupt; cleanup
677
wdenkb9283e22004-07-11 21:49:42 +0000678* Patch by Dan Poirot, 06 Jul 2004:
679 Fix sbc8260 environment variables
680
681* Cleanup redundand "console" environment variable
682
wdenk81050922004-07-11 20:04:51 +0000683* Patch by Mark Jonas, 05 Jul 2004:
684 add support for the Total5100's and Total5200's LCD screen
685
686* Patches by Dan Eisenhut, 01 Jul 2004:
687 - README fixes.
688 - Move doc2000.h include to prevent compiler warning on some boards
689
wdenk6c7a1402004-07-11 19:17:20 +0000690* Patch by Mark Jonas, 01 Jul 2004:
691 Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
692 MGT5100 and MPC5200 based Freescale platforms.
693
wdenkbc54f302004-07-11 18:10:30 +0000694* Patch by Philippe Robin, 01 Jul 2004:
695 Add initialization for Integrator and versatile board files.
696
697* Patch by Hinko Kocevar, 01 Jun 2004:
698 Fix VFD FB allocation, add LCD FB allocation on ARM
699
wdenk56523f12004-07-11 17:40:54 +0000700* Patch by Martin Krause, 30 Jun 2004:
701 Add support for TQM5200 board
702
703* Patch by Martin Krause, 29 Jun 2004:
704 Add loopw command: infinite write loop on address range
705
wdenk857cad32004-07-10 23:48:41 +0000706* Patches by Yasushi Shoji, 29 Jun 2004:
707 - add empty include/asm-microblaze/processor.h
708 - add to CREDITS and MAINTAINERS
709 - add gd initialization
710 - add MicroBlaze and SUZAKU board to MAKEALL script
711 - add reset support for SUZAKU
712 - add flush_cache() for MicroBlaze
713 - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
714 size flash memory on SUZAKU
715
wdenkfabd46a2004-07-10 23:11:10 +0000716* Patch by Prakash Kumar, 27 Jun 2004:
717 Add support for the PXA250 based Intrinsyc Cerf board.
718
719* Patch by Yasushi Shoji, 27 Jun 2004:
720 fix comment in include/common.h
721
wdenk466b7412004-07-10 22:35:59 +0000722* Rename SBC8560 into sbc8560 for consistency
723
724* Patch by Daniel Poirot, 24 Jun 2004:
725 Add support for Wind River's sbc8240 board
726
727* Patches by Yasushi Shoji, 26 Jun 2004:
728 - drivers/serial_xuartlite.c: fix "return 0" in void function
729 - add microblaze support to mkimage tool
730
wdenk8b07a112004-07-10 21:45:47 +0000731* Patch by Fred Klatt, 25 Jun 2004:
wdenk466b7412004-07-10 22:35:59 +0000732 Add support for WindRiver's sbc8560 board
wdenk8b07a112004-07-10 21:45:47 +0000733
734* Patch by Nicolas Lacressonniere, 24 Jun 2004
735 Small Bugs fixes for "at91rm9200dk" board:
736 - Timing modifications for SPI DataFlash access
737 - Fix NAND flash detection bug
738
739* Patch by Nicolas Lacressonniere, 24 Jun 2004:
740 Add Support for Flash AT49BV6416 for AT91RM9200DK board
741
wdenk0ac6f8b2004-07-09 23:27:13 +0000742* Patch by Jon Loeliger, 17 June 2004:
743 Completion of the 8540ADS/8560ADS updates:
744 Fix some PCI and Rapid I/O memory maps,
745 Initialize both TSEC 1 and 2,
746 Initialize SDRAM
747 Update MAINTAINER for 85xx boards and README.mpc85xxads
748
wdenk26238132004-07-09 22:51:01 +0000749* Patch by Yuli Barcohen, 16 Jun 2004:
750 Remove obsolete AdderII port which was superseded by unified
751 AdderII/Adder87x port
752
753* Patch by Ladislav Michl, 16 Jun 2004:
754 Fix gcc-3.3.3 warnings for smc91111.c
755
stroeseede13022004-07-02 14:38:26 +0000756* Patch by Stefan Roese, 02 Jul 2004:
757 - Fix bug in 405 ethernet driver; allocated data not cleared!
758 - Fix problem in 405 i2c driver; don't try to print without console!
759
wdenk78953f22004-07-01 22:02:29 +0000760* Patch by Paul Ruhland, 11 Jun 2004:
761 Remove debug code from 'board/lpd7a40x/flash.c'
762
wdenke55ca7e2004-07-01 21:40:08 +0000763* Patch by Andrea Marson, 11 Jun 2004:
764 Update for PPChameleon board:
765 - support for SysClk @ 25MHz
766 - support for Silicon Motion SM712 VGA controller
767 - some clean ups
768
wdenk93f6a672004-07-01 20:28:03 +0000769* Patches by Richard Woodruff, 10 Jun 2004:
770 - fix problems with examples/stubs.c for GCC >= 3.4
771 - fix problems with gd initialization
772
wdenk39539882004-07-01 16:30:44 +0000773* Patch by Curt Brune, 17 May 2004:
774 - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
775 - Add support for ESPD-Inc. EVB4510 Board
776
777* Patch by Marc Leeman, 11 May 2004:
778 Fix for MPC8245 - reading PPC Memory from another device with the
779 PPC as PCI target device corrupts data due to interenal hardware
780 buffering.
781
wdenke94d2cd2004-06-30 22:59:18 +0000782* Fix "cls" command when used with splash screen
783
784* Increase NFS download timeout (now 1 min - 10 sec is to short for a
785 slow download of a big image)
786
wdenkc3f4d172004-06-25 23:35:58 +0000787* Add "cls" function to MPC823 LCD driver so we can reinitialize the
788 display even after showing a bitmap
789
wdenk49822e22004-06-19 21:19:10 +0000790* Patch by Josef Wagner, 04 Jun 2004:
791 - DDR Ram support for PM520 (MPC5200)
792 - support for different flash types (PM520)
793 - USB / IDE / CF-Card / DiskOnChip support for PM520
794 - 8 bit boot rom support for PM520/CE520
795 - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
796 - I2C and RTC support for CPC45
797 - support of new flash type (28F160C3T) for CPC45
798
wdenk46a414d2004-06-17 18:50:45 +0000799* Fix flash parameters passed to Linux for PPChameleon board
800
801* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
802
wdenkf832d8a2004-06-10 21:55:33 +0000803* Patch by Paul Ruhland, 10 Jun 2004:
wdenk49822e22004-06-19 21:19:10 +0000804 fix support for Logic SDK-LH7A404 board and clean up the
wdenkf832d8a2004-06-10 21:55:33 +0000805 LH7A404 register macros.
806
807* Patch by Matthew McClintock, 10 Jun 2004:
808 Modify code to select correct serial clock on Sandpoint8245
809
wdenkb54d32b2004-06-10 21:34:36 +0000810* Patch by Robert Schwebel, 10 Jun 2004:
811 Add support for Intel K3 strata flash.
812
813* Patch by Thomas Brand, 10 Jun 2004:
814 Fix "loads" command on DK1S10 board
815
wdenk2d24a3a2004-06-09 21:50:45 +0000816* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk99edcfb2004-06-09 21:54:22 +0000817 Add support for 8MB flash SIMM and JFFS2 file system on
818 Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
819
820* Patch by Yuli Barcohen, 09 Jun 2004:
wdenk2d24a3a2004-06-09 21:50:45 +0000821 Add support for Analogue&Micro Adder87x and the older AdderII board.
822
823* Patch by Ming-Len Wu, 09 Jun 2004:
824 Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
825
wdenke63c8ee2004-06-09 21:04:48 +0000826* Patch by Sam Song, 09 Jun 2004:
827 - Add support for RPXlite_DW board
828 - Update FLASH driver for 4*AM29DL323DB90VI
829 - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
830
wdenk36c72872004-06-09 17:45:32 +0000831* Patch by Mark Jonas, 08 June 2004:
832 - Make MPC5200 boards evaluate the SVR to print processor name and
833 version in checkcpu() (cpu/mpc5xxx/cpu.c).
834
835* Patch by Kai-Uwe Bloem, 06 May 2004:
836 Fix endianess problem in cramfs code
837
wdenk4c0d4c32004-06-09 17:34:58 +0000838* Patch by Tom Armistead, 04 Jun 2004:
839 Add support for MAX6900 RTC
840
841* Patches by Ladislav Michl, 03 Jun 2004:
842 - fix cfi_flash.c on LE systems
843 - let 'make mrproper' delete u-boot.img as well
844 - turn printf into debug in cfi_flash.c
845
wdenkca0e7742004-06-09 15:37:23 +0000846* Patch by Kurt Stremerch, 28 May 2004:
847 Add support for Exys XSEngine board
848
wdenk697037f2004-06-09 15:29:49 +0000849* Patch by Martin Krause, 27 May 2004:
850 Fix a MPC5xxx I2C timing issue in i2c_probe().
851
852* Patch by Leif Lindholm, 27 May 2004:
853 Fix board_init_f() for dbau1x00 board.
854
wdenk3ff02c22004-06-09 15:25:53 +0000855* Patch by Imre Deak, 26 May 2004:
856 On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
857 Set flash base accordingly, and decide whether to do or skip board
858 specific setup steps.
859
860* Patch by Josef Baumgartner, 26 May 2004:
861 Add missing define in include/asm-m68k/global_data.h
862
wdenk70f05ac2004-06-09 15:24:18 +0000863* Patch by Josef Baumgartner, 25 May 2004:
864 Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
865
866* Patch by Paul Ruhland, 24 May 2004:
867 fix SDRAM initialization for LPD7A400 board.
868
wdenk13a56952004-06-09 14:58:14 +0000869* Patch by Jian Zhang, 20 May 2004:
870 add support for environment in NAND flash
871
wdenkc3c7f862004-06-09 14:47:54 +0000872* Patch by Yuli Barcohen, 20 May 2004:
873 Add support for Interphase iSPAN boards.
874
875* Patches by Paul Ruhland, 17 May 2004:
876 - Add I/O functions to the smc91111 ethernet driver to support the
877 Logic LPD7A40x boards.
wdenkf39748a2004-06-09 13:37:52 +0000878 - Add support for the Logic Zoom LH7A40x based SDK board(s),
879 specifically the LPD7A400.
880
881* Patches by Robert Schwebel, 15 May 2004:
882 - call MAC address reading code also for SMSC91C111;
883 - make SMSC91C111 timeout configurable, remove duplicate code
884 - fix get_timer() for PXA
885 - update doc/README.JFFS2
886 - use "bootfile" env variable also for jffs2
887
wdenkaa245092004-06-09 12:47:02 +0000888* Patch by Tolunay Orkun, 14 May 2004:
889 Add support for Cogent CSB472 board (8MB Flash Rev)
890
wdenkaa5590b2004-06-09 12:42:26 +0000891* Patch by Thomas Viehweger, 14 May 2004:
892 - flash.h: more flash types added
893 - immap_8260.h: some bits added (useful for RMII)
894 - cmd_coninfo.c: typo corrected, printf -> puts
895 - reduced size by replacing spaces with tab
896
wdenk48abe7b2004-06-09 10:15:00 +0000897* Patch by Robert Schwebel, 13 May 2004:
898 Add 'imgextract' command: extract one part of a multi file image.
899
wdenk547b4cb2004-06-09 00:51:50 +0000900* Patches by Jon Loeliger, 11 May 2004:
wdenk97d80fc2004-06-09 00:34:46 +0000901 Dynamically handle REV1 and REV2 MPC85xx parts.
902 (Jon Loeliger, 10-May-2004).
903 New consistent memory map and Local Access Window across MPC85xx line.
904 New CCSRBAR at 0xE000_0000 now.
905 Add RAPID I/O memory map.
906 New memory map in README.MPC85xxads
907 (Kumar Gala, 10-May-2004)
908 Better board and CPU identification on MPC85xx boards at boot.
909 (Jon Loeliger, 10-May-2004)
910 SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
911 Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
912 (Jim Robertson, 10-May-2004)
913 Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
914 Supports multiple PHYs.
915 (Andy Fleming, 10-May-2004)
916 Some README.MPC85xxads updates.
917 (Kumar Gala, 10-May-2004)
918 Copyright updates for "Freescale"
919 (Andy Fleming, 10-May-2004)
920
wdenk6bdd1372004-06-09 00:15:33 +0000921* Patch by Stephen Williams, 11 May 2004:
922 Add flash support for ST M29W040B
923 Reduce JSE specific flash.c to remove dead code.
924
wdenk356a0d92004-06-09 00:10:59 +0000925* Patch by Markus Pietrek, 04 May 2004:
926 Fix clear_bss code for ARM systems (all except s3c44b0 which
927 doesn't clear BSS at all?)
928
929* Fix "ping" problem on INC-IP board. Strange problem:
930 Sometimes the store word instruction hangs while writing to one of
931 the Switch registers, but only if the next instruction is 16-byte
932 aligned. Moving the instruction into a separate function somehow
933 makes the problem go away.
934
wdenk1eaeb582004-06-08 00:22:43 +0000935* Patch by Rishi Bhattacharya, 08 May 2004:
936 Add support for TI OMAP5912 OSK Board
937
938* Patch by Sam Song May, 07 May 2004:
939 Fix typo of UPM table for rmu board
940
941* Patch by Pantelis Antoniou, 05 May 2004:
wdenk79fa88f2004-06-07 23:46:25 +0000942 - Intracom board update.
943 - Add Codec POST.
944
wdenkcea655a2004-06-06 23:53:59 +0000945* Add support for the second Ethernet interface for the 'PPChameleon'
946 board.
947
wdenka56bd922004-06-06 23:13:55 +0000948* Patch by Dave Peverley, 30 Apr 2004:
949 Add support for OMAP730 Perseus2 Development board
950
951* Patch by Alan J. Luse, 29 Apr 2004:
952 Fix flash chip-select (OR0) option register setting on FADS boards.
953
954* Patch by Alan J. Luse, 29 Apr 2004:
955 Report MII network speed and duplex setting properly when
956 auto-negotiate is not enabled.
957
958* Patch by Jarrett Redd, 29 Apr 2004:
959 Fix hang on reset on Ocotea board due to flash in wrong mode.
960
wdenk5ca26792004-06-06 22:11:41 +0000961* Patch by Dave Peverley, 29 Apr 2004:
962 add MAC address detection to smc91111 driver
963
964* Patch by David Müller, 28 Apr 2004:
965 fix typo in lib_arm/board.c
966
wdenk17ea1172004-06-06 21:51:03 +0000967* Patch by Tolunay Orkun, 20 Apr 2004:
968 - README update: add CONFIG_CSB272 and csb272_config
969 - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
970 i2cfast environment variable
971
wdenk11142572004-06-06 21:35:06 +0000972* Patch by Yuli Barcohen, 19 Apr 2004:
973 - Rename DUET_ADS to MPC885ADS
974 - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
975 - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
976 - Clean up FADS family port to use the new defines
977
wdenk979bdbc2004-06-01 21:08:17 +0000978* Fix PCI support on CPC45 board
979
wdenke4cc71a2004-05-19 21:33:14 +0000980* Patch by Scott McNutt, 25 Apr 2004:
981 Add Nios GDB/JTAG Console support:
982 - Add stubs to support gdb via JTAG.
983 - Add support for console over JTAG.
984 - Minor cleanup.
985
wdenk10767cc2004-05-13 13:23:58 +0000986* Add support for CATcenter board (based on PPChameleon ME module)
987
wdenk02b11f82004-05-12 22:54:36 +0000988* Patch by Klaus Heydeck, 12 May 2004:
989 Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
990 load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
991 various changes to KUP4 board specific files
992
wdenk6c1362c2004-05-12 22:18:31 +0000993* Fix minor network problem on MPC5200: need some delay between
994 resetting the PHY and sending the first packet. Implemented in a
995 "natural" way by invoking the PHY reset and initialization code
996 only once after power on vs. each time the interface is brought up.
997
wdenk9d9e2832004-05-11 21:53:55 +0000998* Add some limited support for low-speed devices to SL811 USB controller
999 (at least "usb reset" now passes successfully and "usb info" displays
1000 correct information)
1001
wdenkbaac6072004-05-08 20:33:20 +00001002* Change init sequence for multiple network interfaces: initialize
1003 on-chip interfaces before external cards.
1004
wdenk32877d62004-05-05 19:44:41 +00001005* Fix memory leak in the NAND-specific JFFS2 code
1006
1007* Fix SL811 USB controller when attached to a USB hub
1008
wdenk62b4ac92004-05-05 08:31:53 +00001009* Fix config option spelling in PM520 config file
1010
1011* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
1012 patches by Pantelis Antoniou, 30 Mar 2004)
1013
wdenk2729af92004-05-03 20:45:30 +00001014* Fix minor NAND JFFS2 related issue
1015
1016* Fixes for SL811 USB controller:
1017 - implement workaround for broken memory stick
1018 - improve error handling
1019
1020* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
1021 cope with congested networks.
1022
1023======================================================================
wdenk56b86bf2004-04-12 14:31:43 +00001024Changes for U-Boot 1.1.1:
1025======================================================================
wdenk507bbe32004-04-18 21:13:41 +00001026
wdenkfc1cfcd2004-04-25 15:41:35 +00001027* Patch by Travis Sawyer, 23 Apr 2004:
1028 Fix VSC/CIS 8201 phy descrambler interoperability timing due to
1029 errata from Vitesse Semiconductor.
wdenk0b8fa032004-04-25 14:37:29 +00001030
1031* Patch by Philippe Robin, 22 Apr 2004:
wdenk02b11f82004-05-12 22:54:36 +00001032 Fix ethernet configuration for "versatile" board
wdenk0b8fa032004-04-25 14:37:29 +00001033
1034* Patch by Kshitij Gupta, 21 Apr 2004:
1035 Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
1036
1037* Patch by Steven Scholz, 24 Feb 2004:
1038 Fix a bug in AT91RM9200 ethernet driver:
1039 The MII interface is now initialized before accessing the PHY.
1040
wdenkb9711de2004-04-25 13:18:40 +00001041* Patch by John Kerl, 19 Apr 2004:
1042 Use U-boot's miiphy.h for PHY register names, rather than
1043 introducing a new header file.
1044
1045* Update pci_ids.h from linux-2.4.26
1046
1047* Patch by Masami Komiya, 19 Apr 2004:
1048 Fix problem cause by VLAN function on little endian architecture
1049 without VLAN environment
1050
wdenke9132ea2004-04-24 23:23:30 +00001051* Clean up the TQM8xx_YYMHz configurations; allow to use the same
wdenkb9711de2004-04-25 13:18:40 +00001052 binary image for all clock frequencies. Implement run-time
wdenke9132ea2004-04-24 23:23:30 +00001053 optimization of flash access timing based on the actual bus
1054 frequency.
1055
wdenk5cf91d62004-04-23 20:32:05 +00001056* Modify KUP4X board configuration to use SL811 driver for USB memory
1057 sticks (including FAT / VFAT filesystem support)
1058
1059* Add SL811 Host Controller Interface driver for USB
1060
1061* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
1062
1063* Patch by Pantelis Antoniou, 19 Apr 2004:
1064 Allow to use shell style syntax (i. e. ${var} ) with standard parser.
1065 Minor patches for Intracom boards.
1066
1067* Patch by Christian Pell, 19 Apr 2004:
1068 cleanup support for CF/IDE on PCMCIA for PXA25X
1069
wdenke35745b2004-04-18 23:32:11 +00001070* Temporarily disabled John Kerl's extended MII command code because
1071 "miivals.h" is missing
1072
1073* Patches by Mark Jonas, 13 Apr 2004:
1074 - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
1075 - Add sync instructions to IceCube SDRAM init code
1076 - Move SDRAM chip constants into seperate include files
1077 - Unify DDR and SDR initialization code
1078 - Unify all IceCube (Lite5xxx) target names
1079
wdenk24711112004-04-18 22:57:51 +00001080* Patch by John Kerl, 16 Apr 2004:
1081 Enable ranges in mii command, e.g. mii read 0-1f 0 or
1082 mii read 4-7 18-1a. Also add mii dump subcommand for
1083 pretty-printing standard regs 0-5.
1084
1085* Patch by Stephen Williams, 16 April 2004:
1086 fix typo in JSE.h; update MAINTAINERS
1087
wdenk498b8db2004-04-18 22:26:17 +00001088* Patch by Matthew S. McClintock, 14 Apr 2004:
1089 fix initdram function for utx8245 board
1090
1091* Patch by Markus Pietrek, 14 Apr 2004:
1092 use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
1093
1094* Patch by Reinhard Meyer, 18 Apr 2004:
1095 provide the IDE Reset Function for EMK 5200 boards
1096
1097* Patch by Masami Komiya, 12 Apr 2004:
1098 fix pci_hose_write_config_{byte,word}_via_dword problems
1099
wdenka8bd82d2004-04-18 22:03:42 +00001100* Patch by Sangmoon Kim, 12 Apr 2004:
1101 Update max RAM size for debris board
1102
1103* Patch by Travis Sawyer, 08 Apr 2004:
1104 Add TLB entry for second DIMM slot on ocotea
1105
1106* Patch by Masami Komiya, 08 Apr 2004:
1107 add RTL8169 network driver
1108
wdenk7abf0c52004-04-18 21:45:42 +00001109* Patch by Dan Malek, 07 Apr 2004:
1110 - Add support for RPC/STx GP3, Motorola 8560 board
1111 - Update 85xx TSEC driver so it searches MII for first available PHY
1112 and uses that one.
1113 - Add functions to support console MII commands.
1114
1115* Patch by Tolunay Orkun, 07 Apr 2004:
wdenka8bd82d2004-04-18 22:03:42 +00001116 Move initialization of bi_iic_fast[]
wdenk7abf0c52004-04-18 21:45:42 +00001117 from board_init_f() to board_init_r()
1118
1119* Patch by Yasushi Shoji, 07 Apr 2004:
1120 Cleanup microblaze port
1121
1122* Patch by Sangmoon Kim, 07 Apr 2004:
1123 Add auto SDRAM module detection for Debris board
1124
wdenkd4326ac2004-04-18 21:17:30 +00001125* Patch by Rune Torgersen, 06 Apr 2004:
1126 - Fix some PCI problems on the MPC8266ADS board
1127 - Fix the location of some PCI entries in the immap structure
1128
wdenk507bbe32004-04-18 21:13:41 +00001129* Patch by Yasushi Shoji, 07 Apr 2004:
1130 - add support for microblaze processors
1131 - add support for AtmarkTechno "suzaku" board
1132
wdenk998eaae2004-04-18 19:43:36 +00001133* Configure PPChameleon board to use redundand environment in flash
1134
1135* Configure PPChameleon board to use JFFS2 NAND support.
1136
1137* Added support for JFFS2 filesystem (read-only) on top of NAND flash
1138
wdenk6e592382004-04-18 17:39:38 +00001139* Patch by Rune Torgersen, 16 Apr 2004:
1140 LBA48 fixes
wdenk56b86bf2004-04-12 14:31:43 +00001141
wdenkc26e4542004-04-18 10:13:26 +00001142* Patches by Pantelis Antoniou, 16 Apr 2004:
1143 - add support for a new version of an Intracom board and fix
1144 various other things on others.
1145 - add verify support to the crc32 command (define
1146 CONFIG_CRC32_VERIFY to enable it)
1147 - fix FEC driver for MPC8xx systems:
1148 1. fix compilation problems for boards that use dynamic
1149 allocation of DPRAM
1150 2. shut down FEC after network transfers
1151 - HUSH parser fixes:
1152 1. A new test command was added. This is a simplified version of
1153 the one in the bourne shell.
1154 2. A new exit command was added which terminates the current
1155 executing script.
1156 3. Fixed handing of $? (exit code of last executed command)
wdenk6e592382004-04-18 17:39:38 +00001157 - Fix some compile problems;
1158 add "once" functionality for the netretry variable
wdenkc26e4542004-04-18 10:13:26 +00001159
wdenkea66bc82004-04-15 23:23:39 +00001160* Patch by George G. Davis, 02 Apr 2004:
1161 add support for Intel Assabet board
1162
wdenkdb01a2e2004-04-15 23:14:49 +00001163* Patch by Stephen Williams, 01 Apr 2004:
1164 Add support for Picture Elements JSE board
1165
1166* Patch by Christian Pell, 01 Apr 2004:
1167 Add CompactFlash support for PXA systems.
1168
wdenk04a85b32004-04-15 18:22:41 +00001169* Patches by Pantelis Antoniou, 30 Mar 2004:
1170 - add auto-complete support to the U-Boot CLI
1171 - add support for NETTA and NETPHONE boards; fix NETVIA board
wdenk5a8c51c2004-04-15 21:16:42 +00001172 - add support for the Epson 156x series of graphical displays
1173 (These displays are serial and not suitable for using a normal
1174 framebuffer console on them)
1175 - add infrastructure needed in order to POST any DSPs in a board
wdenka6ab4bf2004-04-15 21:31:56 +00001176 - improve and fix various things in the MPC8xx FEC driver:
1177 1. The new 87x and 88x series of processors have two FECs,
1178 and the new driver supports them both.
1179 2. Another change in the 87x/88x series is support for
1180 the RMII (Reduced MII) interface. However numerous
1181 changes are needed to make it work since the PHYs
1182 are connected to the same lines. That means that
1183 you have to address them correctly over the MII
1184 interface.
1185 3. We now correctly match the MII/RMII interface
1186 configuration to what the PHY reports.
wdenka3d991b2004-04-15 21:48:45 +00001187 - Fix problem when readingthe MII status register. Due to the
1188 internal design of many PHYs you have to read the register
1189 twice. The problem is more apparent in 10Mbit mode.
1190 - add new mode ".jffs2s" for reading from a NAND device: it just
1191 skips over bad blocks.
1192 - add networking support for VLANs (802.1q), and CDP (Cisco
1193 Discovery Protocol)
wdenkbda6c8a2004-04-15 21:58:11 +00001194 - some minor patches / cleanup
wdenk04a85b32004-04-15 18:22:41 +00001195
1196* Patch by Yuli Barcohen, 28 Mar 2004:
1197 - Add support for MPC8272 family including MPC8247/8248/8271/8272
1198 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
1199 - Change configuration method for MPC8260ADS family
1200
wdenkd716b122004-04-12 16:12:49 +00001201* add startup code to clear the BSS of standalone applications
1202
wdenk56b86bf2004-04-12 14:31:43 +00001203* Fix if / elif handling bug in HUSH shell
1204
1205======================================================================
wdenkf525c8a2004-04-10 20:44:51 +00001206Changes for U-Boot 1.1.0:
wdenkc83bf6a2004-01-06 22:38:14 +00001207======================================================================
1208
wdenk7e780362004-04-08 22:31:29 +00001209* Patch by Mark Jonas: Remove config.tmp files only when
1210 unconfiguring the board
1211
1212* Adapt RMU board for bigger flash memory
1213
wdenk0608e042004-03-25 19:29:38 +00001214* Patch by Klaus Heydeck, 13 Mar 2003:
1215 Add support for KUP4X Board
1216
wdenk518e2e12004-03-25 14:59:05 +00001217* Patch by Pavel Bartusek, 21 Mar 2004
1218 Add Reiserfs support
1219
1220* Patch by Hinko Kocevar, 20 Mar 2004
1221 - Add auto-release for SMSC LAN91c111 driver
1222 - Add save/restore of PTR and PNR regs as suggested in datasheet
1223
wdenk6fb6af62004-03-23 23:20:24 +00001224* Patch by Stephen Williams, 19 March 2004
1225 Increase speed of sector reads from SystemACE,
1226 shorten poll timeout and remove a useless reset
1227
1228* Patch by Tolunay Orkun, 19 Mar 2004:
1229 Make GigE PHY 1000Mbps Speed/Duplex detection conditional
1230 (CONFIG_PHY_GIGE)
1231
1232* Patch by Brad Kemp, 18 Mar 2004:
1233 prevent machine checks during a PCI scan
1234
1235* Patch by Pierre Aubert, 18 Mar 2004:
1236 Fix string cleaning in IDE identification
1237
wdenkeeb1b772004-03-23 22:53:55 +00001238* Patch by Pierre Aubert, 18 Mar 2004:
1239 - Unify video mode handling for Chips & Technologies 69000 Video
1240 chip and Silicon Motion SMI 712/710/810 Video chip
1241 - Add selection of the video output (CRT or LCD) via 'videoout'
1242 environment variable for the Silicon Motion
1243 - README update
1244
1245* Patch by Pierre Aubert, 18 Mar 2004:
1246 include/common.h typo fix
1247
1248* Patches by Tolunay Orkun, 17 Mar 2004:
1249 - Add support for bd->bi_iic_fast[] initialization via environment
1250 variable "i2cfast" (CONFIG_I2CFAST)
1251 - Add "i2cfast" u-boot environment variable support for csb272
1252
wdenk27aa8182004-03-23 22:37:33 +00001253* Patch by Carl Riechers, 17 Mar 2004:
1254 Ignore '\0' characters in console input for use with telnet and
1255 telco pads.
1256
1257* Patch by Leon Kukovec, 17 Mar 2004:
1258 typo fix for strswab prototype #ifdef
1259
wdenk4b9206e2004-03-23 22:14:11 +00001260* Patches by Thomas Viehweger, 16 Mar 2004:
1261 - show PCI clock frequency on MPC8260 systems
1262 - add FCC_PSMR_RMII flag for HiP7 processors
1263 - in do_jffs2_fsload(), take load address from load_addr if not set
1264 explicit, update load_addr otherwise
1265 - replaced printf by putc/puts when no formatting is needed
1266 (smaller code size, faster execution)
1267
wdenk109c0e32004-03-23 21:43:07 +00001268* Patch by Phillippe Robin, 16 Mar 2004:
1269 avoid dereferencing NULL pointer in lib_arm/armlinux.c
1270
1271* Patch by Stephen Williams, 15 Mar 2004:
1272 Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
1273
1274* Patch by Tolunay Orkun, 15 Mar 2004:
1275 Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
1276
1277* Patch by Travis Sawyer, 15 Mar 2004:
1278 Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
1279
wdenkefa329c2004-03-23 20:18:25 +00001280* Add start-up delay to make sure power has stabilized before
1281 attempting to switch on USB on SX1 board.
1282
1283* Patch by Josef Wagner, 18 Mar 2004:
1284 - Add support for MicroSys XM250 board (PXA255)
1285 - Add support for MicroSys PM828 board (MPC8280)
1286 - Add support for 32 MB Flash on PM825/826
1287 - new SDRAM refresh rate for PM825/PM826
1288 - added support for MicroSys PM520 (MPC5200)
1289 - replaced Query by Identify command in CPU86/flash.c
1290 to support 28F160F3B
1291
1292* Fix wrap around problem with udelay() on ARM920T
1293
1294* Add support for Macronix flash on TRAB board
1295
wdenk7d7ce412004-03-17 01:13:07 +00001296* Patch by Pierre Aubert, 15 Mar 2004:
1297 Fix buffer overflow in IDE identification
1298
1299* Fix power-off of LCD for out-of-band temperatures on LWMON board
1300
1301* Remove redundand #define in IceCube.h
1302
wdenkd9df1f42004-03-15 09:00:01 +00001303* Patch by Steven Scholz, 27 Feb 2004:
1304 - Adding get_ticks() and get_tbclk() for AT91RM9200
1305 - Many white space fixes in cpu/at91rm9200/interrupts.c
1306
1307* Patches by Steven Scholz, 20 Feb 2004:
1308 some cleanup in AT91RM9200 related code
1309
wdenk855a4962004-03-14 18:23:55 +00001310* Patches by Travis Sawyer, 12 Mar 2004:
1311 - Fix Gigabit Ethernet support for 440GX
1312 - Add Gigabit Ethernet Support to MII PHY utilities
1313
1314* Patch by Brad Kemp, 12 Mar 2004:
1315 Fixes for drivers/cfi_flash.c:
1316 - Better support for x8/x16 implementations
1317 - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
1318 - Added defines for AMD command and address constants
1319
1320* Patch by Leon Kukovec, 12 Mar 2004:
1321 Fix get_dentfromdir() to correctly handle deleted dentries
wdenk42dfe7a2004-03-14 22:25:36 +00001322
wdenk855a4962004-03-14 18:23:55 +00001323* Patch by George G. Davis, 11 Mar 2004:
1324 Remove hard coded network settings in TI OMAP1610 H2
1325 default board config
1326
1327* Patch by George G. Davis, 11 Mar 2004:
1328 add support for ADS GraphicsClient+ board.
1329
wdenk7d7ce412004-03-17 01:13:07 +00001330* Patch by Pierre Aubert, 11 Mar 2004:
wdenk4b248f32004-03-14 16:51:43 +00001331 - add bitmap command and splash screen support in cfb console
1332 - add [optional] origin in the bitmap display command
1333
1334* Patch by Travis Sawyer, 11 Mar 2004:
1335 Fix ocotea board early init interrupt setup.
1336
1337* Patch by Thomas Viehweger, 11 Mar 2004:
1338 Remove redundand code; add PCI-specific bits to include/mpc8260.h
1339
wdenkaaf224a2004-03-14 15:20:55 +00001340* Patch by Stephan Linz, 09 Mar 2004
1341 - Add support for the SSV ADNP/ESC1 (Nios Softcore)
1342
1343* Patch by George G. Davis, 9 Mar 2004:
1344 fix recent build failure for SA1100 target
1345
1346* Patch by Travis Sawyer, 09 Mar 2004:
1347 Support native interrupt mode for the IBM440GX.
1348 Previously it was running in 440GP compatibility mode.
1349
wdenk3d3befa2004-03-14 15:06:13 +00001350* Patch by Philippe Robin, 09 Mar 2004:
1351 Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
1352 Platform support.
1353
1354* Patch by Masami Komiya, 08 Mar 2004:
1355 Don't overwrite server IP address or boot file name
1356 when the boot server does not return values
1357
wdenk7d7ce412004-03-17 01:13:07 +00001358* Patch by Tolunay Orkun, 5 Mar 2004:
wdenk3d3befa2004-03-14 15:06:13 +00001359 Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
1360
wdenk4d13cba2004-03-14 14:09:05 +00001361* Patch by Tolunay Orkun, 5 Mar 2004:
1362 Fix early board initialization for Cogent CSB272 board
1363
1364* Patch by Ed Okerson, 3 Mar 2004:
1365 fix CFI flash writes for little endian systems
1366
1367* Patch by Reinhard Meyer, 01 Mar 2004:
1368 generalize USB and IDE support for MPC5200 with according
1369 changes to IceCube.h and TOP5200.h
1370 add Am29LV256 256 MBit FLASH support for TOP5200 boards
1371 add info about USB and IDE to README
1372
wdenkc3f9d492004-03-14 00:59:59 +00001373* Patch by Yuli Barcohen, 4 Mar 2004:
1374 Fix problems with GCC 3.3.x which changed handling of global
1375 variables explicitly initialized to zero (now in .bss instead of
1376 .data as before).
1377
1378* Patch by Leon Kukovec, 02 Mar 2004:
1379 add strswab() to fix IDE LBA capacity, firmware and model numbers
1380 on little endian machines
1381
1382* Patch by Masami Komiya, 02 Mar 2004:
1383 - Remove get_ticks() from NFS code
1384 - Add verification of RPC transaction ID
1385
1386* Patch by Pierre Aubert, 02 Mar 2004:
1387 cleanup for IDE and USB drivers for MPC5200
1388
1389* Patch by Travis Sawyer, 01 Mar 2004:
wdenk0e6d7982004-03-14 00:07:33 +00001390 Ocotea:
1391 - Add IBM PPC440GX Ref Platform support (Ocotea)
1392 Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
1393 Adapted to U-Boot and 440GX port
1394 440gx_enet.c:
1395 - Add gracious handling of all Ethernet Pin Selections for 440GX
1396 - Add RGMII selection for Cicada CIS8201 Gigabit PHY
1397 ppc440.h:
1398 - Add needed bit definitions
1399 - Fix formatting
1400
1401* Patch by Carl Riechers, 1 Mar 2004:
1402 Add PPC440GX prbdv0 divider to fix memory clock calculation.
1403
1404* Patch by Stephan Linz, 27 Feb 2004
1405 - avoid problems for targets without NFS download support
1406
wdenkc40b2952004-03-13 23:29:43 +00001407* Patch by Rune Torgersen, 27 Feb 2004:
1408 - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
1409 - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
1410 - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
1411
1412* Patch by Masami Komiya, 27 Feb 2004:
1413 Fix rarpboot: add autoload by NFS
1414
1415* Patch by Dan Eisenhut, 26 Feb 2004:
1416 fix flash_write return value in saveenv
1417
1418* Patch by Stephan Linz, 11 Dec 2003
1419 expand config.mk to avoid trigraph warnings on NIOS
1420
1421* Rename "BMS2003" board into "HMI10"
1422
wdenk6629d2f2004-03-12 15:38:25 +00001423* SX1 patches: use "serial#" for USB serial #; use redundand environment
1424 storage; auto-set console on USB port (using preboot command)
1425
wdenk232c1502004-03-12 00:14:09 +00001426* Add support for SX1 mobile phone; add support for USB-based console
1427 (enable with "setenv stdout usbtty; setenv stdin usbtty")
1428
wdenk79d696f2004-03-11 22:46:36 +00001429* Fix LOWBOOT configuration for MPC5200 with DDR memory
1430
wdenkf8d813e2004-03-02 14:05:39 +00001431* Fix SDRAM timings for LITE5200 / IceCube board
1432
1433* Handle Auti-MDIX / connection status for INCA-IP
1434
1435* Fix USB problems when attempting to read 0 bytes
1436
wdenke7c85682004-02-27 08:21:54 +00001437* Patch by Travis Sawyer, 26 Feb 2004:
1438 Fix broken compile for XPEDITE1K target.
1439
1440* Patch by Stephan Linz, 26 Feb 2004:
1441 Bug fix for NFS code on NIOS targets
wdenk232c1502004-03-12 00:14:09 +00001442
wdenke7c85682004-02-27 08:21:54 +00001443* Patch by Stephen Williams, 26 Feb 2004:
1444 Break up SystemACE reads of large block counts
1445
wdenk132ba5f2004-02-27 08:20:54 +00001446* Patch by Pierre Aubert, 26 Feb 2004
1447 add IDE support for MPC5200
1448
1449* Patch by Masami Komiya, 26 Feb 2004:
1450 add autoload via NFS
1451
1452* Patch by Stephen Williams
1453 Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
1454 elsewhere in the source.
1455
wdenk11dadd52004-02-27 00:07:27 +00001456* Patch by Steven Scholz, 25 Feb 2004:
1457 - Timeouts in FPGA code should be based on CFG_HZ
1458 - Minor cleanup in code for Altera FPGA ACEX1K
1459
1460* Patch by Steven Scholz, 25 Feb 2004:
1461 Changed "Directory Hierarchy" section in README
1462
1463* Patch by Masami Komiya, 25 Feb 2004:
1464 Reduce copy count in nfs_read_reply() of NFS code
1465
wdenk80885a92004-02-26 23:46:20 +00001466* Patch by Markus Pietrek, 24 Feb 2004:
1467 NS9750 DevBoard added
1468
wdenk132ba5f2004-02-27 08:20:54 +00001469* Patch by Pierre Aubert, 24 Feb 2004
wdenk80885a92004-02-26 23:46:20 +00001470 add USB support for MPC5200
1471
1472* Patch by Steven Scholz, 24 Feb 2004:
1473 - fix MII commands to use values from last command
1474
1475* Patch by Torsten Demke, 24 Feb 2004:
1476 Add support for the eXalion platform (SPSW-8240, F-30, F-300)
1477
wdenk0c852a22004-02-26 23:01:04 +00001478* Patch by Rahul Shanbhag, 19 Feb 2004:
1479 Fixes for for OMAP1610 board:
1480 - shift some IRQ specific code to platform.S file
1481 - remove duplicatewatchdog reset code from start.S
1482
1483* Make Auto-MDIX Support configurable on INCA-IP board
1484
1485* Fix license for mkimage tool
1486
wdenka084f7d2004-02-24 22:33:21 +00001487* Patch by Masami Komiya, 24 Feb 2004:
1488 Update NetBootFileXferSize in NFS code
1489
1490* Patch by Scott McNutt, 24 Feb 2004:
1491 fix packet length in NFS code
1492
wdenkcbd8a352004-02-24 02:00:03 +00001493* Patch by Masami Komiy, 22 Feb 2004:
1494 Add support for NFS for file download
1495
wdenk074cff02004-02-24 00:16:43 +00001496* Patch by Andrea Scian, 17 Feb 2004:
1497 Add support for S3C44B0 processor and DAVE B2 board
1498
1499* Patch by Steven Scholz, 20 Feb 2004:
1500 - Add support for MII commands on AT91RM9200 boards
1501 - some cleanup in AT91RM9200 ethernet code
1502
wdenk028ab6b2004-02-23 23:54:43 +00001503* Patch by Peter Ryser, 20 Feb 2004:
1504 Add support for the Xilinx ML300 platform
1505
1506* Patch by Stephan Linz, 17 Feb 2004:
1507 Fix watchdog support for NIOS
1508
1509* Patch by Josh Fryman, 16 Feb 2004:
1510 Fix byte-swapping for cfi_flash.c for different bus widths
1511
1512* Patch by Jon Diekema, 14 Jeb 2004:
1513 Remove duplicate "FPGA Support" notes from the README file
1514
wdenk63e73c92004-02-23 22:22:28 +00001515* Patches by Reinhard Meyer, 14 Feb 2004:
1516 - update board/emk tree; use common flash driver
1517 - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
1518 [adapted for other PPC CPUs -- wd]
1519 - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
1520
1521* Patch by Jon Diekema, 13 Feb 2004:
1522 Call show_boot_progress() whenever POST "FAILED" is printed.
1523
1524* Patch by Nishant Kamat, 13 Feb 2004:
1525 Add support for TI OMAP1610 H2 Board
1526 Fixes for cpu/arm926ejs/interrupt.c
1527 (based on Richard Woodruff's patch for arm925, 16 Oct 03)
1528 Fix for a timer bug in OMAP1610 Innovator
1529 Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
1530
1531* Patches by Stephan Linz, 12 Feb 2004:
1532 - add support for NIOS timer with variable period preload counter value
1533 - prepare POST framework support for NIOS targets
1534
1535* Patch by Denis Peter, 11 Feb 2004:
1536 add POST support for the MIP405 board
1537
wdenkcd0a9de2004-02-23 20:48:38 +00001538* Patch by Laurent Mohin, 10 Feb 2004:
1539 Fix buffer overflow in common/usb.c
1540
1541* Patch by Tolunay Orkun, 10 Feb 2004:
1542 Add support for Cogent CSB272 board
1543
wdenk2d1a5372004-02-23 19:30:57 +00001544* Patch by Thomas Elste, 10 Feb 2004:
1545 Add support for NET+50 CPU and ModNET50 board
1546
1547* Patch by Sam Song, 10 Feb 2004:
1548 Fix typos in cfi_flash.c
1549
1550* Patch by Leon Kukovec, 10 Feb 2004
1551 Fixed long dir entry slot id calculation in get_vfatname
1552
1553* Patch by Robin Gilks, 10 Feb 2004:
1554 add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
1555 !=, <>, <, >, <=, >=)
1556
wdenk3f85ce22004-02-23 16:11:30 +00001557* Fix problem with side effects in macros in include/usb.h
1558
1559* Patch by David Benson, 13 Nov 2003:
1560 bug 841358 - fix TFTP download size limit
1561
1562* Fixing bug 850768:
1563 improper flush_cache() in load_serial()
1564
1565* Fixing bug 834943:
1566 MPC8540 - missing volatile declarations
1567
1568* Patch by Stephen Williams, 09 Feb 2004:
1569 Add support for Xilinx SystemACE chip:
1570 - New files common/cmd_ace.c and include/systemace.h
1571 - Hook systemace support into cmd_fat and the partition manager
1572
1573* Patch by Travis Sawyer, 09 Feb 2004:
1574 Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
1575
wdenk3c74e322004-02-22 23:46:08 +00001576* Patch by Travis Sawyer, 09 Feb 2004:
1577 o 440GX:
1578 - Fix PCI Indirect access for type 1 config cycles with ppc440.
1579 - Add phymode for 440 enet
1580 - fix pci pre init
1581 o XPedite1K:
1582 - Change board_pre_init to board_early_init_f
1583 - Add user flash to bus controller setup
1584 - Fix pci pre init
1585 - Fix is_pci_host to check GPIO for monarch bit
1586 - Force xpedite1k to pci conventional mode (via #define option)
1587
1588* Patch by Brad Kemp, 4 Feb 2004:
1589 - handle the machine check that is generated during the PCI scans
1590 on 82xx processors.
1591 - define the registers used in the IMMR by the PCI subsystem.
1592
1593* Patch by Pierre Aubert, 03 Feb 2004:
1594 cpu/mpc5xxx/start.S: copy MBAR into SPR311
1595
1596* Patch by Jeff Angielski, 03 Feb 2004:
1597 Fix copy & paste error in cpu/mpc8260/pci.c
1598
1599* Patch by Reinhard Meyer, 24 Jan 2004:
1600 Fix typo in cpu/mpc5xxx/pci_mpc5200.c
1601
wdenkcf56e112004-02-20 22:02:48 +00001602* Add Auto-MDIX support for INCA-IP
1603
wdenkbf9e3b32004-02-12 00:47:09 +00001604* Some code cleanup
1605
1606* Patch by Josef Baumgartner, 10 Feb 2004:
1607 Fixes for Coldfire port
1608
1609* Patch by Brad Kemp, 11 Feb 2004:
1610 Fix CFI flash driver problems
1611
wdenka2d18bb2004-02-11 21:35:18 +00001612* Make sure to use a bus clock divider of 2 only when running TQM8xxM
1613 modules at CPU clock frequencies above 66 MHz.
wdenkbf9e3b32004-02-12 00:47:09 +00001614
wdenka2d18bb2004-02-11 21:35:18 +00001615* Optimize flash programming speed for LWMON (by another 100% :-)
1616
wdenkcd37d9e2004-02-10 00:03:41 +00001617* Patch by Jian Zhang, 3 Feb 2004:
1618 - Changed the incorrect FAT12BUFSIZE
1619 - data_begin in fsdata can be negative. Changed it to be short.
1620
wdenkec4c5442004-02-09 23:12:24 +00001621* Patches by Stephan Linz, 30 Jan 2004:
1622 1: - board/altera/common/flash.c:flash_erase():
1623 o allow interrupts befor get_timer() call
1624 o check-up each erased sector and avoid unexpected timeouts
1625 - board/altera/dk1c20/dk1s10.c:board_early_init_f():
1626 o enclose sevenseg_set() in cpp condition
1627 - remove the ASMI configuration for DK1S10_standard_32 (never present)
1628 - fix some typed in mistakes in the NIOS documentation
1629 2: - split DK1C20 configuration into several header files:
1630 o two new files for each NIOS CPU description
1631 o U-Boot related part is remaining in DK1C20.h
1632 3: - split DK1S10 configuration into several header files:
1633 o two new files for each NIOS CPU description
1634 o U-Boot related part is remaining in DK1S10.h
1635 4: - Add support for the Microtronix Linux Development Kit
1636 NIOS CPU configuration at the Altera Nios Development Kit,
1637 Stratix Edition (DK-1S10)
1638 5: - Add documentation for the Altera Nios Development Kit,
1639 Stratix Edition (DK-1S10)
1640 6: - Add support for the Nios Serial Peripharel Interface (SPI)
1641 (master only)
1642 7: - Add support for the common U-Boot SPI framework at
1643 RTC driver DS1306
1644
wdenkb98fff12004-02-09 20:51:26 +00001645* Patch by Rahul Shanbhag, 28 Jan 2004:
1646 Fix flash protection/locking handling for OMAP1610 innovator board.
1647
1648* Patch by Rolf Peukert, 28 Jan 2004:
1649 fix flash write problems on CSB226 board (write with 32 bit bus width)
1650
1651* Patches by Mark Jonas, 16 Jan 2004:
1652 - fix rounding error when calculating baudrates for MPC5200 PSCs
1653 - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
1654 time which is not supported
1655
wdenk5653fc32004-02-08 22:55:38 +00001656* Patch by Yuli Barcohen, 26 Jan 2004:
1657 Allow bzip2 compression for small memory footprint boards
1658
1659* Patch by Brad Kemp, 21 Jan 2004:
1660 Add support for CFI flash driver for both the Intel and the AMD
1661 command sets.
1662
1663* Patch by Travis Sawyer, 20 Jan 2004:
1664 Fix pci bridge auto enumeration of sibling p2p bridges.
1665
1666* Patch by Tolunay Orkun, 12 Jan 2004:
1667 Add some delays as needed for Intel LXT971A PHY support
1668
1669* Patches by Stephan Linz, 09 Jan 2004:
1670 - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
1671 - make DK1C20 board configuration related to ASMI conform to
1672 documentation
1673
wdenkf6e20fc2004-02-08 19:38:38 +00001674* Patch by Anders Larsen, 09 Jan 2004:
1675
1676 ARM memory layout fixes: the abort-stack is now set up in the
1677 correct RAM area, and the BSS is zeroed out as it should be.
1678
1679 Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
1680 of the linker scripts are replaced by '__bss_start' and '_end',
1681 resp., which is a further step to eliminate unnecessary differences
1682 between the implementation of the CPU architectures.
1683
wdenkf4863a72004-02-07 01:27:10 +00001684* Patch by liang a lei, 9 Jan 2004:
1685 Fix Intel 28F128J3 ID in include/flash.h
1686
1687* Patch by Masami Komiya, 09 Jan 2004:
1688 add support for TB0229 board (NEC VR4131 MIPS processor)
1689
1690* Patch by Leon Kukovec, 12 Dec 2003:
1691 changed extern __inline__ into static __inline__ in
1692 include/linux/byteorder/swab.h
1693
wdenkba56f622004-02-06 23:19:44 +00001694* Patch by Travis Sawyer, 30 Dec 2003:
1695 Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
1696 select MDI port based on enabled EMAC device.
1697 Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
1698 base PrPMC board.
1699
wdenka6cccae2004-02-06 21:48:22 +00001700* Patch by Wolter Kamphuis, 15 Dec 2003:
1701 made CONFIG_SILENT_CONSOLE usable on all architectures
1702
1703* Disable date command on TQM866M - there is no RTC on MPC866
1704
wdenk75d1ea72004-01-31 20:06:54 +00001705* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
1706
wdenk68766092004-01-29 09:22:58 +00001707* Implement adaptive SDRAM timing configuration based on actual CPU
1708 clock frequency for INCA-IP; fix problem with board hanging when
1709 switching from 150MHz to 100MHz
1710
1711* Add PCMCIA CS support for BMS2003 board
1712
wdenkc178d3d2004-01-24 20:25:54 +00001713* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
1714 see doc/README.MPC866 for details;
1715 implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
1716 calculate CPU clock frequency from PLL register values.
1717
1718* Add support for 128 MB RAM on TQM8xxL/M modules
1719
wdenkef978732004-01-21 20:46:28 +00001720* Fix PS/2 keyboard problem caused by statically initialized variable
1721 pointing to a location in flash
1722
1723* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
1724
wdenkc837dcb2004-01-20 23:12:12 +00001725* The PS/2 mux on the BMS2003 board needs 450 ms after power on
1726 before we can access it; add delay in case we are faster (with no
1727 CF card inserted)
1728
1729* Cleanup of some init functions
1730
1731* Make sure SCC Ethernet is always stopped by the time we boot Linux
1732 to avoid Linux crashes by early packets coming in.
1733
1734* Accelerate flash accesses on LWMON board by using buffered writes
1735
wdenkb0aef112004-01-18 18:21:54 +00001736* Fix typo in Makefile;
1737 fix problem with PARTNUM detection
1738
wdenk1c437712004-01-16 00:30:56 +00001739* Patch by Reinhard Meyer, 09 Jan 2004:
1740 - add RTC support for MPC5200 based boards (requires RTC_XTAL)
1741
1742* Add support for IDE LED on BMS2003 board
1743 (exclusive with status LED!)
1744
1745* Add support for PS/2 keyboard (used with PS/2 multiplexor on
1746 BMS2003 board)
1747
1748* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
1749 Add common files for "emk" boards
1750
wdenkc83bf6a2004-01-06 22:38:14 +00001751* Add a common get_ram_size() function and modify the the
1752 board-specific files to invoke that common implementation.
1753
1754======================================================================
wdenkb34ff812004-01-06 11:13:56 +00001755Changes for U-Boot 1.0.1:
wdenk5cf9da42003-11-07 13:42:26 +00001756======================================================================
1757
wdenkb34ff812004-01-06 11:13:56 +00001758* Set default clock for INCA-IP to 150 MHz
1759
wdenka522fa02004-01-04 22:51:12 +00001760* Make BMS2003 use a separate config file to avoid #ifdef mess;
1761 add I2C support; add support for DS1337 RTC
1762
1763* Add CompactFlash support for BMS2003 board
1764
1765* Add support for status LED on BMS2003 board
1766
wdenk180d3f72004-01-04 16:28:35 +00001767* Patch by Scott McNutt, 02 Jan 2004:
1768 Add support for the Nios Active Serial Memory Interface (ASMI)
1769 on Cyclone devices
1770
1771* Patch by Andrea Marson, 16 Dec 2003:
1772 Add support for the PPChameleon ME and HI modules
1773
1774* Patch by Yuli Barcohen, 22 Dec 2003:
1775 Add support for Motorola DUET ADS board (MPC87x/88x)
1776
wdenkdd875c72004-01-03 21:24:46 +00001777* Patch by Robert Schwebel, 15 Dec 2003:
1778 add support for cramfs (uses JFFS2 command interface)
1779
wdenkc935d3b2004-01-03 19:43:48 +00001780* Patches by Stephan Linz, 11 Dec 2003:
1781 - more documentation for NIOS port
1782 - new struct nios_pio_t, struct nios_spi_t
1783 - Reconfiguration for NIOS Development Kit DK1C20:
1784 o move board related code from board/dk1c20
1785 to board/altera/dk1c20
1786 o create a new common source path board/altera/common
1787 and move generic flash access stuff into it
1788 o change/expand configuration file DK1C20.h
1789 - Add support for NIOS Development Kit DK1S10
1790 - Add status LED support for NIOS systems
1791 - Add dual 7-segment LED support for Altera NIOS DevKits
1792
wdenk3a473b22004-01-03 00:43:19 +00001793* Patch by Ronen Shitrit, 10 Dec 2003:
1794 Add support for the Marvell DB64360 / DB64460 development boards
1795
1796* Patch by Detlev Zundel, 10 Dec 2003:
1797 fix dependency problem in examples/Makefile
1798
wdenkb6e4c402004-01-02 16:05:07 +00001799* Patch by Denis Peter, 8 Dec 2003
1800 - add support for the PATI board (MPC555)
1801 - add SPI support for the MPC5xx
1802
1803* Patch by Anders Larsen, 08 Dec 2003:
1804 add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
1805 to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
1806 cleanup some redundand #defines
1807
wdenk63f34912004-01-02 15:01:32 +00001808* Patch by André Schwarz, 8 Dec 2003:
1809 fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
1810 - TX and RX deskriptors must be quad-word aligned
1811 - does not work with only one TX deskriptor
1812 - standard reset method does not work
1813
1814* Patch by Masami Komiya, 08 Dec 2003:
1815 add RTL8139 ethernet driver
1816
1817* Patches by Ed Okerson, 07 Dec 2003:
1818 - fix ethernet for the AU1x00 processors in little-endian mode.
1819 - extend memsetup.S for the AU1x00 processors in BE and LE modes
1820
wdenkd4ca31c2004-01-02 14:00:00 +00001821* Minor code cleanup (coding style)
1822
1823* Patch by Reinhard Meyer, 30 Dec 2003:
1824 - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
1825 - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
1826 - turned debug print of PHY registers into a function (called in two places)
1827 - added support for EMK MPC5200 based modules
1828
1829* Fix MPC8xx PLPRCR_MFD_SHIFT typo
1830
1831* Add support for TQM866M modules
1832
1833* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
1834
1835* Fix a few compiler warnings
1836
wdenkc1896002003-12-28 11:44:59 +00001837* Patch by Reinhard Meyer, 28 Dec 2003:
1838 Add initial support for TOP5200 board
1839
wdenk7cb22f92003-12-27 19:24:54 +00001840* Make CPU clock on ICA-IP board controllable by a "cpuclk"
1841 environment variable which can set to "100", "133", or "150". The
1842 CPU clock will be configured accordingly upon next reboot. Other
1843 values are ignored. In case of an invalid or undefined "cpuclk"
1844 value, the compile-time default CPU clock speed will be used.
1845
1846* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
1847 window that is used to access the UART registers by the Linux driver)
1848
1849* Patch by Reinhard Meyer, 20 Dec 2003:
1850 Fix clock calculation for the MPC5200 for higher clock frequencies
1851 (above 2**32 / 10 = 429.5 MHz).
1852
1853* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
1854
wdenkb2001f22003-12-20 22:45:10 +00001855* Fix IceCube CLKIN configuration (it's 33.000000MHz)
1856
1857* Add new configuration for IceCube board with DDR memory
1858
1859* Update TRAB memory configurations
1860
wdenk5c745d22003-12-12 00:02:26 +00001861* Add JFFS2 support for INCA-IP board
1862
stroesed4f58f72003-12-09 15:04:55 +00001863* Patch by Bill Hargen, 09 Dec 2003:
1864 - BUBINGA405EP: changed flash driver to protect top sector containing
1865 first instruction.
1866 - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
1867 - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
1868 - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
1869 - 405EP: added/fixed support for "reginfo" command.
1870 - 4xx: removed spurious MII error messages on "mii info" command.
1871
wdenk4e5ca3e2003-12-08 01:34:36 +00001872* Patch by Bernhard Kuhn, 28 Nov 2003:
1873 add support for Coldfire CPU
1874 add support for Motorola M5272C3 and M5282EVB boards
1875
wdenk9fd5e312003-12-07 23:55:12 +00001876* Patch by Pierre Aubert, 24 Nov 2003:
1877 - add a return value for the fpga command
1878 - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
1879 is defined. If ide_preinit fails, ide_init is aborted.
1880 - fix an endianess problem in fat.h
1881
wdenk3bbc8992003-12-07 22:27:15 +00001882* Patch by Wolter Kamphuis, 05 Dec 2003:
1883 Add support for SNMC's QS850/QS823/QS860T boards
1884
wdenkb028f712003-12-07 21:39:28 +00001885* Patch by Yuli Barcohen, 3 Dec 2003:
1886 "revive" U-Boot support for old Motorola MPC860ADS board
1887
1888* Patch by Cam(ilo?), 03 Dec 2003:
1889 make examples build even with broken Montavista objcopy
1890
1891* Patch by Pavel Bartusek, 27 Nov 2003:
1892 fix conversion problem with "bootretry" evironment variable
1893
wdenkb4676a22003-12-07 19:24:00 +00001894* Patch by Andre Schwarz, 24 Nov 2003:
1895 add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
1896
1897* Patch by Pavel Bartusek, 21 Nov 2003:
1898 set ZMII bridge speed on 440
1899
1900* Patch by Anders Larsen, 17 Nov 2003:
1901 Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
1902
wdenka2663ea2003-12-07 18:32:37 +00001903* Patches by David Müller, 14 Nov 2003:
1904 - board/mpl/common/common_util.c
1905 * implement support for BZIP2 compressed images
1906 * various cleanups (printf -> puts, ...)
1907 - board/mpl/common/flash.c
1908 * report correct errors to upper layers
1909 * check the erase fail and VPP low bits in status reg
1910 - board/mpl/vcma9/cmd_vcma9.c
1911 - board/mpl/vcma9/flash.c
1912 * various cleanups (printf -> puts, ...)
1913 - common/cmd_usb.c
1914 * fix typo in comment
1915 - cpu/arm920t/usb_ohci.c
1916 * support for S3C2410 is missing in #if line
1917 - drivers/cs8900.c
1918 * reinit some registers in case of error (cable missing, ...)
1919 - fs/fat/fat.c
1920 * support for USB/MMC devices is missing in #if line
1921 - include/configs/MIP405.h
1922 - include/configs/PIP405.h
1923 * enable BZIP2 support
1924 * enlarge malloc space to 1MiB because of BZIP2 support
1925 - include/configs/VCMA9.h
1926 * enable BZIP2 support
1927 * enlarge malloc space to 1MiB because of BZIP2 support
1928 * enable USB support
1929 - lib_arm/armlinux.c
1930 * change calling convention of ARM Linux kernel as
1931 described on http://www.arm.linux.org.uk/developer/booting.php
1932
1933* Patch by Thomas Lange, 14 Nov 2003:
1934 Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
1935 support all these AMD boards.
1936
1937* Patch by Thomas Lange, 14 Nov 2003:
1938 Workaround for mips au1x00 physical memory accesses (the au1x00
1939 uses a 36 bit bus internally and cannot access physical memory
1940 directly. Use the uncached SDRAM address instead of the physical
1941 one.)
1942
wdenkef5a9672003-12-07 00:46:27 +00001943* Patch by Xue Ligong (Joe), 13 Nov 2003:
1944 add Realtek 8019 ethernet driver
1945
1946* Patch by Yuli Barcohen, 13 Nov 2003:
1947 MPC826xADS/PQ2FADS cleanup
1948
1949* Patch by Anders Larsen, 12 Nov 2003:
1950 Update README to mark the PORTIO commands non-standard
1951
wdenk5779d8d2003-12-06 23:55:10 +00001952* Patch by Nicolas Lacressonnière, 12 Nov 2003:
1953 update for for Atmel AT91RM9200DK development kit:
1954 - support for environment variables in DataFlash
1955 - Atmel DataFlash AT45DB1282 support
1956
1957* Patch by Jeff Carr, 11 Nov 2003:
1958 add support for new version of 8270 processors
1959
1960* Patches by George G. Davis, 05 Nov 2003:
1961 - only pass the ARM linux initrd tag to the kernel when an initrd
1962 is actually present
1963 - update omap1510inn configuration file
1964
wdenk8bf3b002003-12-06 23:20:41 +00001965* Patches by Stephan Linz, 3 Nov 2003:
1966 - more endianess fixes for LAN91C111 driver
1967 - CFG_HZ configuration patch for NIOS Cyclone board
1968
1969* Patch by Stephan Linz, 28 Oct 2003:
1970 fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
1971
1972* Patch by Steven Scholz, 20 Oct 2003:
1973 - make "mii info <addr>" show infor for PHY at "addr" only
1974 - Endian fix for miiphy_info()
1975
wdenka8c7c702003-12-06 19:49:23 +00001976* Patch by Gleb Natapov, 19 Sep 2003:
1977 Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
1978
1979* Patch by Anders Larsen, 17 Sep 2003:
1980 Bring ARM memory layout in sync with the documentation:
1981 stack and malloc-heap are now located _below_ the U-Boot code
1982
wdenkfa1399e2003-12-06 11:20:01 +00001983* Accelerate booting on TRAB board: read and check autoupdate image
1984 headers first instead of always reading the whole images.
1985
wdenkb96619a2003-12-05 21:08:38 +00001986* Fix type in MPC5XXX code (pointed out by Victor Wren)
1987
wdenkaf6d1df2003-12-03 23:53:42 +00001988* Enabled password check on RMU board
1989
1990* Fix configuration problem with IceCube in LOWBOOT configuration:
1991 envrionment got embedded, corrupting the image layout.
1992
1993* Fix NEC display names (it's 6440 [for 640x480], not 6640).
1994
wdenkfd3103b2003-11-25 16:55:19 +00001995* Added BMS2003 board
1996 add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
1997
wdenkb4757ce2003-11-17 21:45:27 +00001998* Fix flash driver for TRAB board (must use Unlock Bypass Reset
1999 command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
2000 and CPLD
2001
wdenk5bb226e2003-11-17 21:14:37 +00002002* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
2003 recent tools
2004
2005* Add checksum verification to 'imls' command
2006
2007* Add bd_info fields needed for 4xx Linux I2C driver
2008
2009* Patch by Martin Krause, 4 Nov. 2003:
2010 Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
2011
2012* Print used network interface when CONFIG_NET_MULTI is set
2013
wdenk5cf9da42003-11-07 13:42:26 +00002014* Patch by Bernhard Kuhn, 28 Oct 2003:
2015 Add low boot support for MPC5200
2016
2017* Fix problem with dual PCMCIA support (NSCU)
2018
2019* Fix MPC5200 I2C initialization function
2020
2021======================================================================
wdenka43278a2003-09-11 19:48:06 +00002022Changes for U-Boot 1.0.0:
2023======================================================================
2024
wdenkb13fb012003-10-30 21:49:38 +00002025* Fix parameter passing to standalone images with bootm command
2026
2027* Patch by Kyle Harris, 30 Oct 2003:
2028 Fix build errors for ixdp425 board
2029
2030* Patch by David M. Horn, 29 Oct 2003:
2031 Fixes to build under CYGWIN
2032
2033* Get IceCube MGT5100 working (again)
2034
wdenk5fa66df2003-10-29 23:18:55 +00002035* Fix problems in memory test on some boards (which was not
2036 non-destructive as intended)
2037
2038* Patch by Gary Jennejohn, 28 Oct 2003:
2039 Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
2040 to prevent stack overflow on ARM systems
2041
wdenka0f2fe52003-10-28 09:14:21 +00002042* Patch by Stephan Linz, 28 Oct 2003:
2043 fix init sequence error for NIOS port
2044
2045* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
2046
2047* Add CONFIG_VERSION_VARIABLE to TRAB configuration
2048
wdenka57a4962003-10-26 22:52:58 +00002049* Patch by Xiao Xianghua, 23 Oct 2003:
2050 small patch for mpc85xx
2051
2052* Fix small problem in MPC5200 I2C driver
2053
2054* Fix FCC3 support on ATC board
2055
dzu8cb81432003-10-24 13:14:45 +00002056* Correct header printing for multi-image files in do_bootm()
2057
2058* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
2059
wdenk4654af22003-10-22 09:00:28 +00002060* Fix PCI problems on PPChameleon board
2061
wdenka3ad8e22003-10-19 23:22:11 +00002062* Patch by Steven Scholz, 18 Oct 2003:
2063 Fix AT91RM9200 ethernet driver
2064
2065* Patch by Nye Liu, 17 Oct 2003:
2066 Fix typo in include/mpc8xx.h
2067
2068* Patch by Richard Woodruff, 16 Oct 03:
2069 Fixes for cpu/arm925/interrupt.c
2070 - Initialize timestamp & lastdec vars.
2071 - fix timestamp overflows.
2072 - fix lastdec overflow.
2073 - smarter normalization to allow udelay() below 1ms to work.
2074
2075* Patch by Scott McNutt, 16 Oct
2076 add networking support for the Altera Nios Development Kit,
2077 Cyclone Edition (DK-1C20)
2078
2079* Patch by Jon Diekema, 14 Oct 2003:
2080 add hint about doc/README.silent to README file
2081
dzue7df0292003-10-19 21:43:26 +00002082* Add CompactFlash support for NSCU
2083
wdenkd7281f42003-10-19 22:30:08 +00002084* Fix PCI problems on PPChameleonEVB
2085
wdenk3d1e8a92003-10-16 12:53:35 +00002086* TRAB auto-update: Base decision if we have to strip the image
2087 header on image type as encoded in the header
wdenkd7281f42003-10-19 22:30:08 +00002088 (include image type patch by Martin Krause, 17 Oct 2003)
wdenk3d1e8a92003-10-16 12:53:35 +00002089
wdenk42d1f032003-10-15 23:53:47 +00002090* Patches by Xianghua Xiao, 15 Oct 2003:
2091
2092 - Added Motorola CPU 8540/8560 support (cpu/85xx)
2093 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
2094 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
2095
2096* Fix flash timings on TRAB board
2097
wdenk2d5b5612003-10-14 19:43:55 +00002098* Make sure HUSH is initialized for running auto-update scripts
2099
2100* Make 5200 reset command _really_ reset the board, without running
2101 any other code after it
2102
2103* Fix errors with flash erase when range spans across banks
2104 that are mapped in reverse order
2105
2106* Fix flash mapping and display on P3G4 board
2107
2108* Patch by Kyle Harris, 15 Jul 2003:
2109 - add support for Intel IXP425 CPU
2110 - add support for IXDP425 eval board
2111
wdenkf72da342003-10-10 10:05:42 +00002112* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
2113 for more information
2114
wdenk5da627a2003-10-09 20:09:04 +00002115* Patch by Steven Scholz, 10 Oct 2003
2116 - Add support for Altera FPGA ACEX1K
2117
wdenk15647dc2003-10-09 19:00:25 +00002118* Patches by Thomas Lange, 09 Oct 2003:
2119 - fix cmd_ide.c for non ppc boards (read/write functions did not
2120 add ATA base address)
2121 - fix for shannon board
2122 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
wdenk5da627a2003-10-09 20:09:04 +00002123 - Endian swap ATA identity for all big endian CPUs, not just PPC
2124 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
2125 args to linux
2126 - add support for dbau1x00 board (MIPS32)
wdenk15647dc2003-10-09 19:00:25 +00002127
2128* Patch by Sangmoon Kim, 07 Oct 2003:
2129 add support for debris board
2130
wdenka0ff7f22003-10-09 13:16:55 +00002131* Patch by Martin Krause, 09 Oct 2003:
2132 Fixes for TRAB board
2133 - /board/trab/rs485.c: correct baudrate
wdenk42d1f032003-10-15 23:53:47 +00002134 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
wdenka0ff7f22003-10-09 13:16:55 +00002135 udelay(); fix some timing problems with adc controller
2136 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
2137 modify commands: touch and buzzer
2138
2139* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
2140 (quick & dirty workaround for rogue pointer problem in get_vfatname());
2141 Use direct function calls for auto_update instead of hush commands
2142
wdenk4a551702003-10-08 23:26:14 +00002143* Patch by Scott McNutt, 04 Oct 2003:
2144 - add support for Altera Nios-32 CPU
2145 - add support for Nios Cyclone Development Kit (DK-1C20)
2146
2147* Patch by Steven Scholz, 29 Sep 2003:
2148 - A second parameter for bootm overwrites the load address for
2149 "Standalone Application" images.
2150 - bootm sets environment variable "filesize" to the resulting
2151 (uncompressed) data length for "Standalone Application" images
2152 when autostart is set to "no". Now you can do something like
2153 if bootm $fpgadata $some_free_ram ; then
2154 fpga load 0 $some_free_ram $filesize
2155 fi
2156
2157* Patch by Denis Peter, 25 Sept 2003:
2158 add support for the MIP405 Rev. C board
2159
wdenk54387ac2003-10-08 22:45:44 +00002160* Patch by Yuli Barcohen, 25 Sep 2003:
2161 add support for Zephyr Engineering ZPC.1900 board
2162
2163* Patch by Anders Larsen, 23 Sep 2003:
2164 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
2165 implemented for the x86 architecture)
2166
wdenkfc3e2162003-10-08 22:33:00 +00002167* Patch by Sangmoon Kim, 23 Sep 2003:
2168 fix pll_pci_to_mem_multiplier table for MPC8245
2169
2170* Patch by Anders Larsen, 22 Sep 2003:
2171 enable timed autoboot on PXA
2172
2173* Patch by David Müller, 22 Sep 2003:
wdenkfc3e2162003-10-08 22:33:00 +00002174 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
2175 returns correct libgcc file path
2176 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
2177 time on s3c24x0 systems
2178
2179* Patch by Jon Diekema, 19 Sep 2003:
2180 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
2181 link state to the fault LED.
2182 - In NetLoop, make the Fault LED reflect the link status. The link
2183 status gets updated on entry, and on timeouts.
wdenk42d1f032003-10-15 23:53:47 +00002184
wdenkef1464c2003-10-08 22:14:02 +00002185* Patch by Anders Larsen, 18 Sep 2003:
2186 allow mkimage to build and run on Cygwin-hosted systems
2187
2188* Patch by Frank Müller, 18 Sep 2003:
2189 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
2190 cpu/mpc8xx/fec.c
2191
2192* Patch by Pantelis Antoniou, 16 Sep 2003:
2193 add tool to compute fileds in the PLPRCR register for MPC86x
2194
wdenkd9a405a2003-10-07 20:01:55 +00002195* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
2196
wdenk147031a2003-10-07 10:33:38 +00002197* Fix build problems under FreeBSD
2198
wdenk887b3722003-10-06 22:00:45 +00002199* Add generic filesystem image type
2200
wdenkfbe4b5c2003-10-06 21:55:32 +00002201* Make fatload set filesize environment variable
2202
2203* enable basic / medium / high-end configurations for PPChameleonEVB
2204 board; fix NAND code
2205
2206* enable TFTP client code to specify to the server the desired
2207 timeout value (see RFC-2349)
2208
dzubb65a312003-09-30 15:22:12 +00002209* Improve SDRAM setup for TRAB board
2210
dzu88a1bfa2003-09-30 15:11:43 +00002211* Suppress all output with splashscreen configured only if "splashimage"
2212 is set
2213
dzucad07372003-09-30 14:36:51 +00002214* Fix problems with I2C support for mpc5200
2215
dzu8a42eac2003-09-29 21:55:54 +00002216* Adapt TRAB configuration and auto_update to new memory layout
2217
dzu91e940d2003-09-25 22:32:40 +00002218* Add configuration for wtk board
2219
dzu29127b62003-09-25 22:30:12 +00002220* Add support for the Sharp LQ065T9DR51U LCD display
2221
wdenk206c60c2003-09-18 10:02:25 +00002222* Patch by Rune Torgersen, 17 Sep 2003:
2223 - Fixes for MPC8266 default config
wdenk65bd0e22003-09-18 10:45:21 +00002224 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
wdenk206c60c2003-09-18 10:02:25 +00002225
2226* Patches by Jon Diekema, 17 Sep 2003:
2227 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
2228 env_common.c)
2229 - sbc8260 tweaks
2230 - adjust "help" output
2231
wdenk5f535fe2003-09-18 09:21:33 +00002232* Patches by Anders Larsen, 17 Sep 2003:
2233 - fix spelling errors
2234 - set GD_FLG_DEVINIT flag only after device function pointers
2235 are valid
2236 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
2237 writeable
2238 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
2239 - trigger watchdog while waiting in serial driver
2240
wdenkb0639ca2003-09-17 22:48:07 +00002241* Add auto-update code for TRAB board using USB memory sticks,
2242 support new configuration with more memory
wdenkf54ebdf2003-09-17 15:10:32 +00002243
wdenkef709e92003-09-16 17:35:37 +00002244* disable MPC5200 bus pipelining as workaround for bus contention
2245
wdenk4aeb2512003-09-16 17:06:05 +00002246* Modify XLB arbiter priorities on MPC5200 so all devices use same
2247 priority; configure critical interrupts to be handled like external
2248 interrupts
2249
wdenkacf98e72003-09-16 11:39:10 +00002250* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
2251 go back to 66 MHz for stability
2252
wdenk78137c32003-09-15 18:00:00 +00002253* Patches by Jon Diekema, 15 Sep 2003:
2254 - add description for missing CFG_CMD_* entries in the README file
2255 - sacsng tweaks
2256
wdenk35656de2003-09-14 19:08:39 +00002257* Patch by Gleb Natapov, 14 Sep 2003:
2258 enable watchdog support for all MPC824x boards that have a watchdog
2259
2260* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
2261 "Non-octet Aligned Frame" errors we see at 100 Mbps
2262
2263* Patch by Sharad Gupta, 14 Sep 2003:
2264 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
2265
wdenk200f8c72003-09-13 19:13:29 +00002266* Patch by llandre, 11 Sep 2003:
2267 update configuration for PPChameleonEVB board
2268
wdenk531716e2003-09-13 19:01:12 +00002269* Patch by David Müller, 13 Sep 2003:
2270 various changes to VCMA9 board specific files
2271
2272* Add I2C support for MGT5100 / MPC5200
2273
wdenkb70e7a02003-09-12 20:09:09 +00002274* Patch by Rune Torgersen, 11 Sep 2003:
2275 Changed default memory option on MPC8266ADS to NOT be Page Based
2276 Interleave, since this doesn't work very well with the standard
2277 16MB DIMM
2278
2279* Patch by George G. Davis, 12 Sep 2003:
2280 fix Makefile settings for sk98 driver
2281
stroese68ce8952003-09-12 08:57:52 +00002282* Patch by Stefan Roese, 12 Sep 2003:
2283 - new boards added: DP405, HUB405, PLU405, VOH405
2284 - some esd boards updated
2285 - cpu/ppc4xx/sdram.c: disable memory controller before setting
2286 first values
2287 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
2288
wdenk4f7cb082003-09-11 23:06:34 +00002289* Patch by Martin Krause, 11 Sep 2003:
2290 add burn-in tests for TRAB board
2291
2292* Enable instruction cache on MPC5200 board
2293
wdenka43278a2003-09-11 19:48:06 +00002294* Patch by Denis Peter, 11 Sep 2003:
2295 - fix USB data pointer assignment for bulk only transfer.
2296 - prevent to display erased directories in FAT filesystem.
2297
2298* Change output format for NAND flash - make it look like for other
2299 memory, too
2300
2301======================================================================
wdenk149dded2003-09-10 18:20:28 +00002302Changes for U-Boot 0.4.8:
wdenkd94f92c2003-08-28 09:41:22 +00002303======================================================================
2304
dzu29127b62003-09-25 22:30:12 +00002305* Add I2C and RTC support for RMU board
2306
wdenk7205e402003-09-10 22:30:53 +00002307* Patches by Denis Peter, 9 Sep 2003:
2308 add FAT support for IDE, SCSI and USB
2309
2310* Patches by Gleb Natapov, 2 Sep 2003:
2311 - cleanup of POST code for unsupported architectures
2312 - MPC824x locks way0 of data cache for use as initial RAM;
2313 this patch unlocks it after relocation to RAM and invalidates
2314 the locked entries.
2315
2316* Patch by Gleb Natapov, 30 Aug 2003:
2317 new I2C driver for mpc107 bridge. Now works from flash.
2318
2319* Patch by Dave Ellis, 11 Aug 2003:
2320 - JFFS2: fix typo in common/cmd_jffs2.c
2321 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
2322 - JFFS2: remove node version 0 warning
2323 - JFFS2: accept JFFS2 PADDING nodes
2324 - SXNI855T: add AM29LV800 support
2325 - SXNI855T: move environment from EEPROM to flash
2326 - SXNI855T: boot from JFFS2 in NOR or NAND flash
2327
2328* Patch by Bill Hargen, 11 Aug 2003:
2329 fixes for I2C on MPC8240
2330 - fix i2c_write routine
2331 - fix iprobe command
2332 - eliminates use of global variables, plus dead code, cleanup.
2333
wdenk149dded2003-09-10 18:20:28 +00002334* Add support for USB Mass Storage Devices (BBB)
2335 (tested with USB memory sticks only)
2336
2337* Avoid flicker on TRAB's VFD
2338
wdenk7152b1d2003-09-05 23:19:14 +00002339* Add support for SK98xx driver
2340
2341* Add PCI support for SL8245 board
2342
2343* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
2344 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
2345 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
2346
2347* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
2348 to allow for more accurate baudrate settings
2349 (error now 0.7% at 115 kbps, instead of 3.5% before)
2350
2351* Patch by Andreas Mohr, 4 Sep 2003:
2352 Fix a lot of spelling errors
2353
wdenk12f34242003-09-02 22:48:03 +00002354* Add support for PPChameleon Eval Board
2355
2356* Add support for P3G4 board
2357
2358* Fix problem with MGT5100 FEC driver: add "early" MAC address
2359 initialization
2360
wdenk326428c2003-08-31 18:37:54 +00002361* Patch by Yuli Barcohen, 7 Aug 2003:
2362 check BCSR to detect if the board is configured in PCI mode
2363
wdenk149dded2003-09-10 18:20:28 +00002364======================================================================
2365Changes for U-Boot 0.4.7:
2366======================================================================
2367
wdenk0cb61d72003-08-30 00:05:50 +00002368* Patch by Raghu Krishnaprasad, 7 Aug 2003:
2369 add support for Adder II MPC852T module
2370
wdenk6f213472003-08-29 22:00:43 +00002371* Patch by George G. Davis, 19 Aug 2003:
2372 fix TI Innovator/OMAP1510 pin configs
2373
2374* Patches by Kshitij, 18 Aug 2003
2375 - add support for arm926ejs cpu core
2376 - add support for TI OMAP 1610 Innovator Board
2377
wdenkc29fdfc2003-08-29 20:57:53 +00002378* Patch by Yuli Barcohen, 14 Aug 2003:
2379 add support for bzip2 uncompression
2380
2381* Add GCC library to examples/Makefile so GCC utility functions will
2382 be resolved, too
2383
wdenkca75add2003-08-29 10:05:53 +00002384* Add I2C and RTC support for RMU board using software I2C driver
2385 (because of better response to iprobe command); fix problem with
2386 "reset" command
2387
stroese437ce072003-08-28 14:24:37 +00002388* Patch by Matthias Fuchs, 28 Aug 2003:
2389 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
2390 CONFIG_BOOTP_MAKS (see README).
2391
wdenkd94f92c2003-08-28 09:41:22 +00002392* Fix ICU862 environment problem
2393
2394* Fix RAM size detection for RMU board
2395
2396* Implement "reset" for MGT5100/MPC5200 systems
2397
2398======================================================================
2399Changes for U-Boot 0.4.6:
wdenk2535d602003-07-17 23:16:40 +00002400======================================================================
2401
wdenke0ac62d2003-08-17 18:55:18 +00002402* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
2403 allow selection of clock frequency as "make" target
2404
2405* Implement memory autosizing code for IceCube boards
2406
2407* Configure network port on INCA-IP for autonegotiation
2408
2409* Fix overflow problem in network timeout code
2410
2411* Patch by Richard Woodruff, 8 Aug 2003:
2412 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
2413
wdenkd94f92c2003-08-28 09:41:22 +00002414======================================================================
2415Changes for U-Boot 0.4.5:
2416======================================================================
2417
wdenkae3af052003-08-07 22:18:11 +00002418* Update for TQM board defaults:
2419 disable clocks_in_mhz, enable boot count limit
2420
dzu9374fa22003-08-07 15:04:48 +00002421* Removed tools/gdb from "make all" target. Added make target "gdbtools"
2422 in toplevel directory instead. Removed astest.c from tools/gdb because
2423 it is no longer relevant.
2424
wdenk96e48cf2003-08-05 18:22:44 +00002425* Fix PCI support for MPC5200 / IceCube Board
2426
wdenkbdccc4f2003-08-05 17:43:17 +00002427* Map ISP1362 USB OTG controller for NSCU board
2428
2429* Patch by Brad Parker, 02 Aug 2003:
2430 fix sc520_cdp problems
2431
2432* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
2433
2434* Allow erase command to cross flash bank boundaries
2435
wdenk1f4bb372003-07-27 00:21:01 +00002436* Patch by Scott McNutt, 21 Jul 2003:
2437 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
2438 Both LynxOS and BlueCat linux KDIs are supported.
2439
2440* Patch by Richard Woodruff, 25 Jul 2003:
2441 use more reliable reset for OMAP/925T
2442
2443* Patch by Nye Liu, 25 Jul 2003:
2444 fix typo in mpc8xx.h
2445
2446* Patch by Richard Woodruff, 24 Jul 2003:
2447 Fixes for cmd_nand.c:
2448 - Fixed null dereferece which could result in incorrect ECC values.
2449 - Added support for devices with no Ready/Busy signal hooked up.
2450 - Added OMAP1510 read/write protect handling.
2451 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
2452 for non-JFFS2.
2453 - Switched default ECC to be JFFS2.
2454
wdenk77846742003-07-26 08:08:08 +00002455* Allow crc32 to be used at address 0x000
2456
2457* Provide consistent interface to standalone applications to access
2458 the 'global_data' structure
2459 Provide a doc/README.standalone more useful to users/developers.
2460
2461* Make IceCube MGT5100 FEC driver work
2462
wdenk27b207f2003-07-24 23:38:38 +00002463* Implement new mechanism to export U-Boot's functions to standalone
2464 applications: instead of using (PPC-specific) system calls we now
2465 use a jump table; please see doc/README.standalone for details
2466
2467* Patch by Dave Westwood, 24 Jul 2003:
2468 added support for Unity OS (a proprietary OS)
2469
2470* Patch by Detlev Zundel, 23 Jul 2003:
2471 add "imls" command to print flash table of contents
2472
2473* Fix cold boot detection for log buffer reset
2474
2475* Return error for invalid length specifiers with "cp.X" etc.
2476
2477* Fix startup problem on MIPS
2478
2479* Allow for CONFIG_SPLASH_SCREEN even when no explicit
2480 bitmap support is configured
2481
2482* Patch by Bill Hargen, 18 Jul 2003:
2483 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
2484
2485* Patch by Denis Peter, 18 Jul 2003:
2486 - fix memory configuration for MIP405T
2487 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
2488
2489* Cleanup of TQM82xx configurations; use "official" board types
2490 to make selection easier.
2491
wdenk2535d602003-07-17 23:16:40 +00002492* Patch by Martin Krause, 17 Jul 2003:
2493 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
2494
2495* Patch by Richard Woodruff, 17 July 03:
stroese437ce072003-08-28 14:24:37 +00002496 - Fixed bug in OMAP1510 baud rate divisor settings.
wdenk2535d602003-07-17 23:16:40 +00002497
2498* Patch by Nye Liu, 16 July 2003:
2499 MPC860FADS fixes:
2500 - add MPC86xADS support (uses MPC86xADS.h)
2501 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
2502 o PLPRCR changes
2503 o BRG changes (EXTAL/XTAL restricted to 10MHz)
2504 o don't trust gclk() software measurement by default, depend on
2505 CONFIG_8xx_GCLK_FREQ
2506 - add DRAM SIMM not installed detection
2507 - use more "correct" SDRAM initialization sequence
2508 - allow different SDRAM sizes (8xxADS has 8M)
2509 - default DER is 0
2510 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
2511 - rename MAMR/MBMR defines to be more consistent. Should eventually
2512 be merged into MxMR to better reflect the PowerQUICC datasheet.
2513
2514* Patch by Yuli Barcohen, 16 Jul 2003:
2515 support new Motorola PQ2FADS-ZU evaluation board which replaced
2516 MPC8260ADS and MPC8266ADS
2517
2518======================================================================
wdenk945af8d2003-07-16 21:53:01 +00002519Changes for U-Boot 0.4.4:
2520======================================================================
2521
2522* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
2523
2524* Add support for MGT5100 and MPC5200 processors
2525
2526* Patch by Lutz Dennig, 15 Jul 2003:
2527 update for R360MPI board
2528
2529======================================================================
wdenk8564acf2003-07-14 22:13:32 +00002530Changes for U-Boot 0.4.3:
wdenkb37c7e52003-06-30 16:24:52 +00002531======================================================================
2532
wdenk2e5983d2003-07-15 20:04:06 +00002533* Patches by Kshitij, 04 Jul 2003
wdenk945af8d2003-07-16 21:53:01 +00002534 - added support for arm925t cpu core
wdenk2e5983d2003-07-15 20:04:06 +00002535 - added support for TI OMAP 1510 Innovator Board
2536
wdenk6dff5522003-07-15 07:45:49 +00002537* Patches by Martin Krause, 14 Jul 2003:
2538 - add I2C support for s3c2400 systems (trab board)
2539 - (re-) add "ping" to command table
2540
2541* Fix handling of "slow" POST routines
2542
wdenk8564acf2003-07-14 22:13:32 +00002543* Patches by Yuli Barcohen, 13 Jul 2003:
2544 - Correct flash and JFFS2 support for MPC8260ADS
2545 - fix PVR values and clock generation for PowerQUICC II family
2546 (8270/8275/8280)
2547
2548* Patch by Bernhard Kuhn, 08 Jul 2003:
2549 - add support for M68K targets
2550
2551* Patch by Ken Chou, 3 Jul:
2552 - Fix PCI config table for A3000
2553 - Fix iobase for natsemi.c
2554 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
wdenk945af8d2003-07-16 21:53:01 +00002555
wdenk8564acf2003-07-14 22:13:32 +00002556* Allow to enable "slow" POST routines by key press on power-on
2557* Fix temperature dependend switching of LCD backlight on LWMON
2558* Tweak output format for LWMON
2559
stroese57029232003-07-11 08:23:12 +00002560* Patch by Stefan Roese, 11 Jul 2003:
2561 - Fix bug in CONFIG_VERSION_VARIABLE.
2562 - AR405 config updated.
2563 - OCRTC/ORSG: bsp command added.
2564 - ASH405 bsp update.
2565
wdenk8564acf2003-07-14 22:13:32 +00002566======================================================================
2567Changes for U-Boot 0.4.2:
2568======================================================================
2569
wdenkf12e5682003-07-07 20:07:54 +00002570* Add support for NSCU board
2571
2572* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
2573
2574* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
2575 mirror bit flash on TQM8xxM modules
2576
wdenk0d498392003-07-01 21:06:45 +00002577* Patch by Kenneth Johansson, 30 Jun 2003:
2578 get rid of MK_CMD_ENTRY macro; update doc/README.command
2579
wdenkb37c7e52003-06-30 16:24:52 +00002580* Patch by Seb James, 30 Jun 2003:
2581 Improve documentation of I2C configuration in README
2582
2583* Fix problems with previous log buffer "fixes"
2584
2585* Fix minor help text issues
2586
2587* "log append" did not append a newline
2588
2589======================================================================
wdenkb0fce992003-06-29 21:03:46 +00002590Changes for U-Boot 0.4.1:
wdenk8bde7f72003-06-27 21:31:46 +00002591======================================================================
2592
wdenkb0fce992003-06-29 21:03:46 +00002593* Fix some missing commands, cleanup header files
2594 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
2595
wdenk9d2b18a2003-06-28 23:11:04 +00002596* Rewrite command lookup and help command (fix problems with bubble
2597 sort when sorting command name list). Minor cleanup here and there.
2598
wdenkd1cbe852003-06-28 17:24:46 +00002599* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
2600 - Allow to call sysmon function interactively
2601 - PIC on LWMON board needs delay after power-on
2602 - Add missing RSR definitions for MPC8xx
2603 - Improve log buffer handling: guarantee clean reset after power-on
wdenk149dded2003-09-10 18:20:28 +00002604 - Add support for EXBITGEN board (aka "genie")
wdenkd1cbe852003-06-28 17:24:46 +00002605 - Add support for SL8245 board
2606
wdenk8bde7f72003-06-27 21:31:46 +00002607* Code cleanup:
2608 - remove trailing white space, trailing empty lines, C++ comments, etc.
2609 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
2610
2611* Patches by Kenneth Johansson, 25 Jun 2003:
2612 - major rework of command structure
2613 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2614
2615======================================================================
2616Changes for U-Boot 0.4.0:
wdenk4532cb62003-04-27 22:52:51 +00002617======================================================================
2618
wdenk993cad92003-06-26 22:04:09 +00002619* Patches by Robert Schwebel, 26 Jun 2003:
wdenk8bde7f72003-06-27 21:31:46 +00002620 - csb226 configuration updated
2621 - credits for logodl port updated
2622 - innokom configuration updated
2623 - logodl tree update, still with coding style inconsistencies
2624 - added OCM for ppc405 warning to README
wdenk993cad92003-06-26 22:04:09 +00002625
2626* Patch by Pantelis Antoniou, 25 Jun 2003:
2627 update NetVia with V2 board support
2628
wdenkb783eda2003-06-25 22:26:29 +00002629* Header file cleanup for ARM
2630
2631* Patch by Murray Jensen, 24 Jun 2003:
2632 - make sure to use only U-boot provided header files
2633 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
2634
stroesea300d832003-06-24 14:32:24 +00002635* Patch by Stefan Roese, 24 Jun 2003:
2636 - Update esd ASH405 board files.
2637 - Update esd DASA_SIM config file.
2638 - Add ping command to some esd boards.
2639
wdenkcceb8712003-06-23 18:12:28 +00002640* Patch by Yuli Barcohen, 23 Jun 2003:
2641 Update for MPC8260ADS board
2642
2643* Patch by Murray Jensen, 23 Jun 2003:
2644 - cleanup of GCC 3.x compiler warnings
2645
wdenk3595ac42003-06-22 17:18:28 +00002646* Patch by Rune Torgersen, 4 Jun 2003:
2647 add large memory support for MPC8266ADS board
stroesea300d832003-06-24 14:32:24 +00002648
wdenk3595ac42003-06-22 17:18:28 +00002649* Patch by Richard Woodruff, 19 June 03:
2650 - Enabled standard u-boot device abstraction for ARM
2651 - Enabled console device for ARM
2652 - Initilized bi_baudrate for ARM
2653
2654* Patch by Bill Hargen, 23 Apr 2003:
2655 fix byte order for 824x I2C addresses (write op)
2656
wdenk592c5ca2003-06-21 00:17:24 +00002657* Patch by Murray Jensen, 20 Jun 2003:
2658 - hymod update
2659 - cleanup (especially for gcc-3.x compilers)
2660
wdenk72755c72003-06-20 23:10:58 +00002661* Patch by Tom Guilliams, 20 Jun 2003:
2662 added CONFIG_750FX support for IBM 750FX processors
2663
wdenk03329902003-06-20 22:36:30 +00002664* Patch by Devin Crumb, 02 Apr 2003:
2665 Fix clock divider rounding problem in drivers/serial.c
2666
2667* Patch by Richard Woodruff, 19 June 03:
2668 - Fixed smc91c111 driver to sync with the u-boot environment
2669 (driver/smc91c111.c).
wdenk0b97ab12003-06-19 23:58:30 +00002670 - Added eth_init error return check in NetLoop (net/net.c).
2671
wdenk03329902003-06-20 22:36:30 +00002672* Patch by Ken Chou, 19 June 2003:
wdenk0b97ab12003-06-19 23:58:30 +00002673 Added support for A3000 SBC board (Artis Microsystems Inc.)
2674
wdenk6dd652f2003-06-19 23:40:20 +00002675* Patches by Murray Jensen, 17 Jun 2003:
2676 - Hymod board database mods: add "who" field and new xilinx chip types
2677 - provide new "init_cmd_timeout()" function so code external to
2678 "common/main.c" can use the "reset_cmd_timeout()" function before
2679 entering the main loop
2680 - add DTT support for adm1021 (new file dtt/adm1021.c; config
2681 slightly different. see include/configs/hymod.h for an example
2682 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
2683 CFG_DTT_ADM1021 defined)
2684 - add new "eeprom_probe()" function which has similar args and
2685 behaves in a similar way to "eeprom_read()" etc.
2686 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
2687 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
2688 - gdbtools copyright update
2689 - ensure that set_msr() executes the "sync" and "isync" instructions
2690 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
2691 - 8260 I/O ports fix: Open Drain should be set last when configuring
2692 - add SIU IRQ defines for 8260
2693 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
2694 config.mk to allow board configurations to override the GNU
2695 linker script, selected via the LDSCRIPT, make variable, and to
2696 give an initial value to the OBJCFLAGS make variable
2697 - 8260 i2c enhancement:
2698 o correctly extends the timeout depending on the size of all
2699 queued messages for both transmit and receive
2700 o will not continue with receive if transmit times out
2701 o ensures that the error callback is done for all queued tx
2702 and rx messages
2703 o correctly detects both tx and rx timeouts, only delivers one to
2704 the callback, and does not overwrite an earlier error
2705 o logic in i2c_probe now correct
2706 - add "vprintf()" function so that "panic()" function can be
2707 technically correct
2708 - many Hymod board changes
2709
wdenk52f52c12003-06-19 23:04:19 +00002710* Patches by Robert Schwebel, 14 Jun 2003:
2711 - add support for Logotronic DL datalogger board
2712 - cleanup serial line after kermit binary download
2713 - add debugX macro (debug level support)
2714 - update mach-types.h to latest arm.linux.org.uk master list.
2715
wdenk48b42612003-06-19 23:01:32 +00002716* Patches by David Müller, 12 Jun 2003:
2717 - rewrite of the S3C24X0 register definitions stuff
2718 - "driver" for the built-in S3C24X0 RTC
2719
2720* Patches by Yuli Barcohen, 12 Jun 2003:
2721 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
2722 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
2723 configuration word supplied by FPGA on some MPC8260ADS boards
2724
2725* Patch by Pantelis Antoniou, 10 Jun 2003:
2726 Unify status LED interface
2727
wdenk15ef8a52003-06-18 20:22:24 +00002728* Add support for DS12887 RTC; add RTC support for ATC board
2729
wdenk2abbe072003-06-16 23:50:08 +00002730* Patch by Nicolas Lacressonniere, 11 Jun 2003:
2731 Modifications for Atmel AT91RM9200DK ARM920T based development kit
2732 - Add Atmel DataFlash support for reading and writing.
stroesea300d832003-06-24 14:32:24 +00002733 - Add possibility to boot a Linux from DataFlash with BOOTM command.
wdenk2abbe072003-06-16 23:50:08 +00002734 - Add Flash detection on Atmel AT91RM9200DK
2735 (between Atmel AT49BV1614 and AT49BV1614A flashes)
2736 - Replace old Ethernet PHY layer functions
2737 - Change link address
2738
2739* Patch by Frank Smith, 9 Jun 2003:
2740 use CRIT_EXCEPTION for machine check on 4xx
2741
2742* Patch by Detlev Zundel, 13 Jun 2003:
2743 added implementation of the "carinfo" command in cmd_immap.c
2744
wdenk71f95112003-06-15 22:40:42 +00002745* Fix CONFIG_NET_MULTI support in include/net.h
2746
2747* Patches by Kyle Harris, 13 Mar 2003:
2748 - Add FAT partition support
2749 - Add command support for FAT
2750 - Add command support for MMC
2751 ----
2752 - Add Intel PXA support for video
2753 - Add Intel PXA support for MMC
2754 ----
2755 - Enable MMC and FAT for lubbock board
2756 - Other misc changes for lubbock board
2757
wdenk487778b2003-06-06 11:20:01 +00002758* Patch by Robert Schwebel, April 02, 2003:
2759 fix for SMSC91111 driver
2760
wdenka3ed3992003-06-05 19:37:36 +00002761* Patch by Vladimir Gurevich, 04 Jun 2003:
2762 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
2763
stroese08eaea92003-06-05 15:44:37 +00002764* Patch by Stefan Roese, 05 Jun 2003:
2765 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
2766 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
2767 data cache can be used even if the chip select is in use.
2768 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
2769 (see README for further description).
2770 - Changed config files of CONFIG_EEPRO100 boards to use the
2771 CFG_RX_ETH_BUFFER define.
2772
wdenk73a8b272003-06-05 19:27:42 +00002773* Add support for RMU board
2774
2775* Add support for TQM862L at 100/50 MHz
2776
2777* Patch by Pantelis Antoniou, 02 Jun 2003:
2778 major reconstruction of networking code;
2779 add "ping" support (outgoing only!)
2780
wdenkf3e0de62003-06-04 15:05:30 +00002781* Patch by Denis Peter, 04 June 2003:
2782 add support for the MIP405T board
2783
wdenk682011f2003-06-03 23:54:09 +00002784* Patches by Udi Finkelstein, 2 June 2003:
2785 - Added support for custom keyboards, initialized by defining a
2786 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
2787 - Added support for the RBC823 board.
2788 - cpu/mpc8xx/lcd.c now automatically calculates the
2789 Horizontal Pixel Count field.
2790
2791* Fix alignment problem in BOOTP (dhcp_leasetime option)
2792 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
2793
2794* Patch by Mark Rakes, 14 May 2003:
2795 add support for Intel e1000 gig cards.
2796
2797* Patch by Nye Liu, 3 Jun 2003:
2798 fix critical typo in MAMR definition (include/mpc8xx.h)
2799
2800* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
2801
2802* Patch by Klaus Heydeck, 2 Jun 2003
2803 Minor changes for KUP4K configuration
2804
wdenk7a8e9bed2003-05-31 18:35:21 +00002805* Patch by Marc Singer, 29 May 2003:
2806 Fixed rarp boot method for IA32 and other little-endian CPUs.
2807
2808* Patch by Marc Singer, 28 May 2003:
2809 Added port I/O commands.
2810
2811* Patch by Matthew McClintock, 28 May 2003
2812 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
2813 - minor patches for utx8245
2814
2815* Patch by Daniel Engström, 28 May 2003:
2816 x86 update
2817
2818* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
2819 add nand flash support to SXNI855T configuration
2820 fix/extend nand flash support:
2821 - fix 'nand erase' command so does not erase bad blocks
2822 - fix 'nand write' command so does not write to bad blocks
2823 - fix nand_probe() so handles no flash detected properly
2824 - add doc/README.nand
2825 - add .jffs2 and .oob options to nand read/write
2826 - add 'nand bad' command to list bad blocks
2827 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
2828 - make NAND read/write faster
2829
2830* Patch by Rune Torgersen, 23 May 2003:
2831 Update for MPC8266ADS board
2832
wdenk3b57fe02003-05-30 12:48:29 +00002833* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
2834 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
2835 _time_ (!) if the environment is embedded within the U-Boot image,
2836 or in a separate flash sector.
2837
2838* Cleanup CFG_DER #defines in config files (wd maintained only)
2839
wdenkf07771c2003-05-28 08:06:31 +00002840* Fix data abort exception handling for arm920t CPU
2841
2842* Fix alignment problems with flash driver for TRAB board
2843
2844* Patch by Donald White, 21 May 2003:
2845 fix calculation of base address in pci_hose_config_device()
2846
2847* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
2848 execute "cmd2", even if "cmd1" fails. Note that this is different
2849 to "run var1 var2" where the contents of "var2" will NOT be
2850 executed when a command in "var1" fails.
2851
wdenk38b99262003-05-23 23:18:21 +00002852* Add zero-copy ramdisk support (requires corresponding kernel support!)
2853
wdenk4c3b21a2003-05-23 12:36:20 +00002854* Patch by Kyle Harris, 20 May 2003:
2855 In preparation for an ixp port, rename cpu/xscale and arch-xscale
2856 into cpu/pxa and arch-pxa.
2857
stroesed9ff6e82003-05-23 11:49:24 +00002858* Patch by Stefan Roese, 23 May 2003:
2859 - IBM PPC405EP port added.
2860 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
2861 UART0) is used as default U-Boot console. PPC4xx only!
2862 - esd ASH405 board added (PPC405EP based).
2863 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
2864 - esd CPCI405AB board added.
2865 - esd PMC405 board added.
2866 - Update of some esd boards.
2867
wdenk33149b82003-05-23 11:38:58 +00002868* Patch by Denis Peter, 19 Mai 2003:
2869 add support for the MIP405-3 board
2870
wdenk5d232d02003-05-22 22:52:13 +00002871* Patch by Dave Ellis, 22 May 2003:
2872 Fix problem with only partially cleared .bss segment
2873
2874* Patch by Rune Torgersen, 12 May 2003:
2875 get PCI to work on a MPC8266ADS board; incorporate change to
2876 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
2877
2878* Patch by Nye Liu, 1 May 2003:
2879 minor patches for the FADS8xx
2880
2881* Patch by Thomas Schäfer, 28 Apr 2003:
2882 Fix SPD handling for 256 ECC DIMM on Walnut
2883
wdenkc8c3a8b2003-05-21 20:26:20 +00002884* Add support for arbitrary bitmaps for TRAB's VFD command;
2885 allow to pass boot bitmap addresses in environment variables;
2886 allow for zero boot delay
wdenk82226bf2003-05-20 20:49:01 +00002887
2888* Patch by Christian Geißinger, 19 May 2002:
2889 On TRAB: wait until the dummy byte has been completely sent
2890
wdenk7f70e852003-05-20 14:25:27 +00002891* Patch by David Updegraff, 22 Apr 2003:
2892 update for CrayL1 board
2893
2894* Patch by Pantelis Antoniou, 21 Apr 2003:
2895 add boot support for ARTOS (a proprietary OS)
2896
2897* Patch by Steven Scholz, 11 Apr 2003:
2898 Add support for RTC DS1338
2899
2900* Patch by Rod Boyce, 24 Jan 2003:
2901 Fix counting of extended partitions in diskboot command
2902
wdenk59de2ed2003-05-20 10:58:04 +00002903* Patch by Christophe Lindheimer, 20 May 2003:
2904 allow the use of CFG_LOADS when CFG_NO_FLASH is set
2905
wdenk86d82762003-05-20 10:39:44 +00002906* Fix SDRAM timing on Purple board
2907
wdenk66fd3d12003-05-18 11:30:09 +00002908* Add support for CompactFlash on ATC board
2909 (includes support for Intel 82365 and compatible PC Card controllers,
2910 and Yenta-compatible PCI-to-CardBus controllers)
2911
wdenk45219c42003-05-12 21:50:16 +00002912* Patch by Mathijs Haarman, 08 May 2003:
2913 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
2914
wdenk9c62cc52003-05-03 23:33:47 +00002915* Fix problem with usage of "true" (undefined in current versions of bfd.h)
2916
wdenk7aa78612003-05-03 15:50:43 +00002917* Add support for Promess ATC board
2918
2919* Patch by Keith Outwater, 28 Apr 2003:
2920 - Miscellaneous corrections and additions to GEN860T board specific code.
2921 - Added GEN860_SC variant to GEN860T.
2922 - Miscellaneous corrections to GEN860T documentation.
2923 - Correct duplicate entry in U-Boot CREDITS file.
2924 - Add GEN860T_SC entry in MAINTAINERS file.
2925 - Update CREDITS file with GEN860T_SC info.
2926
2927* Update Smiths Aerospace addresses in MAINTAINERS file
2928
2929* Fix error handling in hush's version of "run" command
2930
wdenk4532cb62003-04-27 22:52:51 +00002931* LWMON extensions:
2932 - Splashscreen support
2933 - modem support
2934 - sysmon support
2935 - temperature dependend enabling of LCD
2936
2937* Allow booting from old "PPCBoot" disk partitions
2938
2939* Add support for TQM8255 Board / MPC8255 CPU
2940
2941======================================================================
wdenk02c9bed2003-04-20 17:41:25 +00002942Changes for U-Boot 0.3.1:
wdenkd126bfb2003-04-10 11:18:18 +00002943======================================================================
2944
wdenkd791b1d2003-04-20 14:04:18 +00002945* Make sure Block Lock Bits get cleared in R360MPI flash driver
2946
2947* MPC823 LCD driver: Fill color map backwards, to allow for steady
2948 display when Linux takes over
2949
2950* Patch by Erwin Rol, 27 Feb 2003:
2951 Add support for RTEMS (this time for real).
2952
2953* Add support for "bmp info" and "bmp display" commands to load
2954 bitmap images; this can be used (for example in a "preboot"
2955 command) to display a splash screen very quickly after poweron.
2956
2957* Add support for 133 MHz clock on INCA-IP board
2958
wdenk4a6fd342003-04-12 23:38:12 +00002959* Patch by Lutz Dennig, 10 Apr 2003:
2960 Update for R360MPI board
2961
2962* Add new meaning to "autostart" environment variable:
2963 If set to "no", a standalone image passed to the
2964 "bootm" command will be copied to the load address
2965 (and eventually uncompressed), but NOT be started.
2966 This can be used to load and uncompress arbitrary
2967 data.
2968
stroese69f8f8272003-04-10 13:30:28 +00002969* Patch by Stefan Roese, 10 Apr 2003:
wdenk4a6fd342003-04-12 23:38:12 +00002970 Changed DHCP client to use IP address from server option field #54
2971 from the OFFER packet in the server option field #54 in the REQUEST
2972 packet. This fixes a problem using a Windows 2000 DHCP server,
2973 where the DHCP-server is not the TFTP-server.
2974
2975* Set max brightness for MN11236 displays on TRAB board
stroese69f8f8272003-04-10 13:30:28 +00002976
wdenkd126bfb2003-04-10 11:18:18 +00002977* Add support for TQM862L modules
2978
2979======================================================================
wdenk60fbe252003-04-08 23:25:21 +00002980Changes for U-Boot 0.3.0:
wdenkaacf9a42003-01-17 16:27:01 +00002981======================================================================
2982
wdenk3e386912003-04-05 00:53:31 +00002983* Patch by Arun Dharankar, 4 Apr 2003:
2984 Add IDMA example code (tested on 8260 only)
2985
2986* Add support for Purple Board (MIPS64 5Kc)
2987
2988* Add support for MIPS64 5Kc CPUs
2989
2990* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
2991
2992* Patch by Denis Peter, 04 Apr 2003:
2993 - update MIP405-4 board
2994
stroese36c05a82003-04-04 16:55:30 +00002995* Patch by Stefan Roese, 4 Apr 2003:
2996 - U-Boot version environment variable "ver" added
2997 (CONFIG_VERSION_VARIABLE).
2998 - Changed PPC405GPr version from A to B.
2999 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
3000
wdenk3e386912003-04-05 00:53:31 +00003001* Patches by Denis Peter, 03 April 2003:
3002 - fix PCI IRQs on MPL boards
3003 - fix two more un-relocated pointer problems
3004
3005* Fix behaviour of "run" command:
3006 - print error message iv variable does not exist
3007 - terminate processing of arguments in case of error
3008
3009* Patches by Peter Figuli, 10 Mar 2003
3010 - Add support for BTUART on PXA platform
3011 - Add support for WEP EP250 (PXA) board
3012
3013* Fix flash problems on INCA-IP; add tool to allow bruning images to
3014 flash using a BDI2000
3015
3016* Implement fix for I2C Edge Conditions problem for all boards that
3017 use the bit-banging driver (common/soft_i2c.c)
3018
wdenk0db5bca2003-03-31 17:27:09 +00003019* Patch by Martin Winistoerfer, 23 Mar 2003
3020 - Add port to MPC555/556 microcontrollers
3021 - Add support for cmi customer board with
3022 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
3023
3024* Patch by Rick Bronson, 28 Mar 2003:
3025 - fix common/cmd_nand.c
3026
wdenk85ec0bc2003-03-31 16:34:49 +00003027* Patch by Arun Dharankar, 24 Mar 2003:
3028 - add threads / scheduler example code
3029
3030* Add patches by Robert Schwebel, 31 Mar 2003:
3031 - add ctrl-c support for kermit download
3032 - align bdinfo output on ARM
wdenk3e386912003-04-05 00:53:31 +00003033 - csb226 board: bring in sync with innokom/memsetup.S
3034 - csb226 board: fix MDREFR handling
3035 - misc doc fixes / extensions
3036 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
3037 - add BOOT_PROGRESS to armlinux.c
wdenk85ec0bc2003-03-31 16:34:49 +00003038
stroese36c05a82003-04-04 16:55:30 +00003039* Add CPU ID, version, and clock speed for INCA-IP
wdenk85ec0bc2003-03-31 16:34:49 +00003040
wdenk506f0442003-03-28 14:40:36 +00003041* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
3042 - fix SRAM and SDRAM memory sizing
3043 - add status LED support
3044 - add MAC address for second (SCC1) ethernet port
3045
3046* Update default environment for TQM8260 board
3047
wdenkdc7c9a12003-03-26 06:55:25 +00003048* Patch by Rick Bronson, 16 Mar 2003:
wdenkc0218802003-03-27 12:09:35 +00003049 - Add NAND flash support for reading, writing, and erasing NAND
3050 flash (certain forms of which are called SmartMedia).
3051 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
wdenkdc7c9a12003-03-26 06:55:25 +00003052
3053* Patches by Robert Schwebel, 19 Mar 2003:
3054 - use arm-linux-gcc as default compiler for ARM
3055 - fix i2c fixup code
3056 - fix missing baudrate setting
3057 - added $loadaddr / CFG_LOAD_ADDR support to loadb
3058 - moved "ignoring trailing characters" _before_ u-boot wants to
3059 print out diagnostics messages; removes bogus characters at the
3060 end of transmission
3061
3062* Patch by John Zhan, 18 Mar 2003:
3063 Add support for SinoVee Microsystems SC8xx boards
3064
3065* Patch by Rolf Offermanns, 21 Mar 2003:
3066 ported the dnp1110 related changes from the current armboot cvs to
3067 current u-boot cvs. smc91111 does not work. problem marked in
3068 smc91111.c, grep for "FIXME".
3069
3070* Patch by Brian Auld, 25 Mar 2003:
3071 Add support for STM flash chips on ebony board
3072
wdenk4d75a502003-03-25 16:50:56 +00003073* Add PCI support for MPC8250 Boards (PM825 module)
3074
stroese44e5c5c2003-03-25 14:44:48 +00003075* Patch by Stefan Roese, 25 Mar 2003:
3076 - PCI405 update.
3077
stroese5d5d44e2003-03-20 15:32:59 +00003078* Patch by Stefan Roese, 20 Mar 2003:
3079 - CPCI4052 update (support for revision 3).
3080 - Set edge conditioning circuitry on PPC405GPr for compatibility
3081 to existing PPC405GP designs.
3082 - Clip udiv to 5 bits on PPC405 (serial.c).
3083
wdenkc0218802003-03-27 12:09:35 +00003084* Extend INCAIP board support:
3085 - add automatic RAM size detection
3086 - add "bdinfo" command
3087 - pass flash address and size to Linux kernel
3088 - switch to 150 MHz clock
3089
wdenk06d01db2003-03-14 20:47:52 +00003090* Avoid flicker on the TRAB's VFD by synchronizing the enable with
3091 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
3092 boards, version 153 for Rev. 200 boards).
3093
3094* Patch by Vladimir Gurevich, 12 Mar 2003:
3095 Fix relocation problem of statically initialized string pointers
3096 in common/cmd_pci.c
3097
3098* Patch by Kai-Uwe Blöm, 12 Mar 2003:
3099 Cleanup & bug fixes for JFFS2 code:
3100 - the memory mangement was broken. It caused havoc on malloc by
3101 writing beyond the block boundaries.
3102 - the length calculation for files was wrong, sometimes resulting
3103 in short file reads.
3104 - data copying now optionally takes fragment version numbers into
3105 account, to avoid copying from older data.
3106 See doc/README.JFFS2 for details.
3107
wdenk3bac3512003-03-12 10:41:04 +00003108* Patch by Josef Wagner, 12 Mar 2003:
3109 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
3110 - ETH05 and BEDBUG support for CU824
3111 - added support for MicroSys CPC45
3112 - new BOOTROM/FLASH0 and DOC base for PM826
3113
3114* Patch by Robert Schwebel, 12 Mar 2003:
3115 Fix the chpart command on innokom board
3116
3117* Name cleanup:
3118 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
3119 s/PPCBoot/U-Boot/ in some files
3120 s/pImage/uImage/ in some files
3121
3122* Patch by Detlev Zundel, 15 Jan 2003:
3123 Fix '' command line quoting
3124
3125* Patch by The LEOX team, 19 Jan 2003:
3126 - add support for the ELPT860 board
3127 - add support for Dallas ds164x RTC
3128
wdenk1cb8e982003-03-06 21:55:29 +00003129* Patches by David Müller, 31 Jan 2003:
3130 - minimal setup for CardBus bridges
3131 - add EEPROM read/write support in the CS8900 driver
3132 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
wdenk3bac3512003-03-12 10:41:04 +00003133 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
wdenk1cb8e982003-03-06 21:55:29 +00003134
3135* Patch by Steven Scholz, 04 Feb 2003:
3136 add support for RTC DS1307
3137
3138* Patch by Reinhard Meyer, 5 Feb 2003:
3139 fix PLPRCR/SCCR init sequence on 8xx to allow for
3140 changes of EBDF by software
3141
3142* Patch by Vladimir Gurevich, 07 Feb 2003:
3143 "API-compatibility patch" for 4xx I2C driver
3144
3145* TRAB fixes / extensions:
3146 - Restore VFD brightness as saved in environment
wdenk15ef8a52003-06-18 20:22:24 +00003147 - add support for Fujitsu flashes
wdenk1cb8e982003-03-06 21:55:29 +00003148 - make sure both buzzers are turned off (drive low level)
3149
wdenk47cd00f2003-03-06 13:39:27 +00003150* Patches by Robert Schwebel, 06 Mar 2003:
3151 - fix bug in BOOTP code (must use NetCopyIP)
3152 - update of CSB226 port
3153 - clear BSS segment on XScale
3154 - added support for i2c_init_board() function
3155 - update to the Innokom plattform
3156
3157* Extend support for redundand environments for configurations where
3158 environment size < sector size
3159
wdenkdb2f721f2003-03-06 00:58:30 +00003160* Patch by Rune Torgersen, 13 Feb 2003:
3161 Add support for Motorola MPC8266ADS board
3162
3163* Patch by Kyle Harris, 19 Feb 2003:
3164 patches for the Intel lubbock board:
3165 memsetup.S - general cleanup (based on Robert's csb226 code)
3166 flash.c - overhaul, actually works now
3167 lubbock.c - fix init funcs to return proper value
3168
3169* Patch by Kenneth Johansson, 26 Feb 2003:
stroese5d5d44e2003-03-20 15:32:59 +00003170 - Fixed off by one in RFTA calculation.
wdenkdb2f721f2003-03-06 00:58:30 +00003171 - No need to abort when LDF is lower than we can program it's only
stroese5d5d44e2003-03-20 15:32:59 +00003172 minimum timing so clamp it to what we can do.
wdenkdb2f721f2003-03-06 00:58:30 +00003173 - Takes function pointer to function for reading the spd_nvram. Usefull
3174 for faking data or hardcode a module without the nvram.
3175 - fix other user for above change
3176 - fix some comments.
3177
3178* Patches by Brian Waite, 26 Feb 2003:
3179 - fix port for evb64260 board
3180 - fix PCI for evb64260 board
3181 - fix PCI scan
3182
3183* Patch by Reinhard Meyer, 1 Mar 2003:
3184 Add support for EMK TOP860 Module
3185
3186* Patch by Yuli Barcohen, 02 Mar 2003:
3187 Add SPD EEPROM support for MPC8260ADS board
3188
wdenk43d96162003-03-06 00:02:04 +00003189* Patch by Robert Schwebel, 21 Jan 2003:
3190 - Add support for Innokom board
3191 - Don't complain if "install" fails
3192 - README cleanup (remove duplicated lines)
3193 - Update PXA header files
3194
3195* Add documentation for existing POST code (doc/README.POST)
3196
3197* Patch by Laudney Ren, 15 Jan 2003:
3198 Fix handling of redundand environment in "tools/envcrc.c"
3199
3200* Patch by Detlev Zundel, 28 Feb 2003:
3201 Add bedbug support for 824x systems
3202
3203* Add support for 16 MB flash configuration of TRAB board
3204
3205* Patch by Erwin Rol, 27 Feb 2003:
3206 Add support for RTEMS
3207
3208* Add image information to README
3209
stroese2a9e02e2003-02-18 11:30:24 +00003210* Patch by Stefan Roese, 18 Feb 2003:
3211 CPCIISER4 configuration updated.
3212
stroesed7787c62003-02-17 16:06:06 +00003213* Patch by Stefan Roese, 17 Feb 2003:
3214 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
3215
stroesead10dd92003-02-14 11:21:23 +00003216* Patch by Stefan Roese, 13 Feb 2003:
3217 Add "pcidelay" environment variable (in ms, enabled via
3218 CONFIG_PCI_BOOTDELAY).
3219 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
3220 RST# to respond to configuration cycles (33MHz -> 1s).
3221
wdenk43d96162003-03-06 00:02:04 +00003222* Fix dual PCMCIA slot support (when running with just one
3223 slot populated)
3224
3225* Add VFD type detection to trab board
3226
3227* extend drivers/cs8900.c driver to synchronize ethaddr environment
3228 variable with value in the EEPROM
3229
stroeseee1b3b52003-02-10 16:39:00 +00003230* Patch by Stefan Roese, 10 Feb 2003:
3231 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
3232
wdenkc0218802003-03-27 12:09:35 +00003233* Add support for MIPS32 4Kc CPUs
3234
3235* Add support for INCA-IP Board
3236
wdenk43d96162003-03-06 00:02:04 +00003237======================================================================
3238Changes for U-Boot 0.2.2:
3239======================================================================
3240
wdenkaacf9a42003-01-17 16:27:01 +00003241* Add dual ethernet support on PM826
3242
3243* Add support for LXT971 PHY on PM826
3244
3245* Patch by Tord Andersson, 16 Jan 2003:
3246 Fix flash sector count for TQM8xxL
3247
3248* Fix I2C EEPROM problem on ICU862 board (would only write the first
3249 16 bytes out of each 32 byte block)
3250
3251======================================================================
3252Changes for U-Boot 0.2.1:
wdenk288b3d72002-12-20 23:42:25 +00003253======================================================================
3254
wdenk608c9142003-01-13 23:54:46 +00003255* Add support for V37 board
3256 (patch by Jón Benediktsson, 11 Dec 2002)
3257
wdenkd0fb80c2003-01-11 09:48:40 +00003258* Update baudrate in bd_info when it gets changed
3259
3260* Add watchdog trigger points while waiting for serial port
3261 (so far only 8xx -- needed on LWMON with 100ms watchdog)
3262
3263* Improve command line tool to access the U-Boot's environment
3264 (figuration of the utility, using a config file)
3265
wdenka25f8622003-01-02 23:57:29 +00003266* Add single quote support for (old) command line parser
3267
wdenk288b3d72002-12-20 23:42:25 +00003268* Switch LWMON board default config from FRAM to EEPROM;
3269 in POST, EEPROM shows up on 8 addresses
3270
3271======================================================================
wdenk2f91a3d2002-12-17 18:07:30 +00003272Changes for U-Boot 0.2.0:
wdenk24ee89b2002-11-03 17:56:27 +00003273======================================================================
3274
wdenk6aff3112002-12-17 01:51:00 +00003275* Use 1-byte-read instead of -write for iprobe() function
3276 Add i2c commands to PM826 config
3277
3278* extend I2C POST code: check for list on known addresses
3279
wdenk228f29a2002-12-08 09:53:23 +00003280* Improve log buffer code; use "loglevel" to decide which messages
3281 to log on the console, too (like in Linux); get rid of "logstart"
3282
3283* Add command line tool to access the U-Boot's environment
3284 (board-specific for TRAB now, to be fixed later)
3285
wdenk7c7a23b2002-12-07 00:20:59 +00003286* Patch by Hans-Joerg Frieden, 06 Dec 2002
3287 Fix misc problems with AmigaOne support
3288
3289* Patch by Chris Hallinan, 3 Dec 2002:
3290 minor cleanup to the MPC8245 EPIC driver
3291
3292* Patch by Pierre Aubert , 28 Nov 2002
3293 Add support for external (SIU) interrupts on MPC8xx
3294
3295* Patch by Pierre Aubert , 28 Nov 2002
3296 Fix nested syscalls bug in standalone applications
3297
3298* Patch by David Müller, 27 Nov 2002:
3299 fix output of "pciinfo" command for CardBus bridge devices.
3300
3301* Fix bug in TQM8260 board detection - boards got stuck when board ID
3302 was not readable
3303
wdenk1f53a412002-12-04 23:39:58 +00003304* Add LED indication for IDE activity on KUP4K board
3305
wdenka6c7ad22002-12-03 21:28:10 +00003306* Fix startup problems with VFD display on TRAB
3307
3308* Patch by Pierre Aubert, 20 Nov 2002
3309 Add driver for Epson SED13806 graphic controller.
3310 Add support for BMP logos in cfb_console driver.
3311
wdenkea909b72002-11-21 23:11:29 +00003312* Added support for both PCMCIA slots (at the same time!) on MPC8xx
3313
3314* Patch by Rod Boyce, 21 Nov 2002:
3315 fix PCMCIA on MBX8xx board
3316
3317* Patch by Pierre Aubert , 21 Nov 2002
3318 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
3319 bootmode word in DPRAM configurable
3320
wdenkb2184c32002-11-19 23:01:07 +00003321* Patch by Daniel Engström, 18 Nov 2002:
3322 Fixes for x86 port (mostly strings issues)
3323
3324* Patch by Ken Chou, 18 Nov 2002:
3325 Fix for natsemi NIC cards (DP83815)
3326
3327* Patch by Pierre Aubert, 19 Nov 2002:
3328 fix a bug for the MII configuration, and some warnings
3329
wdenkc7de8292002-11-19 11:04:11 +00003330* Patch by Thomas Frieden, 13 Nov 2002:
3331 Add code for AmigaOne board
3332 (preliminary merge to U-Boot, still WIP)
3333
3334* Patch by Jon Diekema, 12 Nov 2002:
3335 - Adding URL for IEEE OUI lookup
3336 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
3337 being defined.
3338 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
3339 root-on-nfs macros are designed to switch how the default boot
3340 method gets defined.
3341
wdenk2262cfe2002-11-18 00:14:45 +00003342* Patch by Daniel Engström, 13 Nov 2002:
3343 Add support for i386 architecture and AMD SC520 board
3344
3345* Patch by Pierre Aubert, 12 Nov 2002:
3346 Add support for DOS filesystem and booting from DOS floppy disk
3347
wdenk1d0350e2002-11-11 21:14:20 +00003348* Patch by Jim Sandoz, 07 Nov 2002:
3349 Increase number of network RX buffers (PKTBUFSRX in
3350 "include/net.h") for EEPRO100 based boards (especially SP8240)
3351 which showed "Receiver is not ready" errors when U-Boot was
3352 processing the receive buffers slower than the network controller
3353 was filling them.
3354
wdenkeb9401e2002-11-11 02:11:37 +00003355* Patch by Andreas Oberritter, 09 Nov 2002:
3356 Change behaviour of NetLoop(): return -1 for errors, filesize
3357 otherwise; return code 0 is valid an means no file loaded - in this
3358 case the environment still gets updated!
3359
3360* Patches by Jon Diekema, 9 Nov 2002:
3361 - improve ADC/DAC clocking on the SACSng board to align
3362 the failing edges of LRCLK and SCLK
3363 - sbc8260 configuration tweaks
3364 - add status LED support for 82xx systems
3365 - wire sspi/sspo commands into command handler; improved error
3366 handlering
3367 - add timestamp support and alternate memory test to the
3368 SACSng configuration
3369
3370* Patch by Vince Husovsky, 7 Nov 2002:
wdenk7f6c2cb2002-11-10 22:06:23 +00003371 Add "-n" to linker options to get rid of "Not enough room for
3372 program headers" problem
3373
3374* Patch by David Müller, 05 Nov 2002
3375 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
3376 so we can use an already existing name
3377
3378* Patch by Pierre Aubert, 05 Nov 2002
3379 Hardware relatied improvments in FDC boot code
3380
3381* Patch by Holger Schurig, 5 Nov 2002:
3382 Make the PXA really change it's frequency
3383
3384* Patch by Pierre Aubert, 05 Nov 2002
3385 Add support for slave serial Spartan 2 FPGAs
3386
3387* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
3388 drivers
3389
wdenk56f94be2002-11-05 16:35:14 +00003390* Add support for log buffer which can be passed to Linux kernel's
3391 syslog mechanism; used especially for POST results.
3392
3393* Patch by Klaus Heydeck, 31 Oct 2002:
3394 Add initial support for kup4k board
3395
wdenk384ae022002-11-05 00:17:55 +00003396* Patch by Robert Schwebel, 04 Nov 2002:
3397 - use watchdog to reset PXA250 systems
3398 - added progress callbacks to (some of the) ARM code
3399 - update for Cogent CSB226 board
3400
3401* Add support for FPS860 board
3402
wdenke95b61c2002-11-04 16:02:40 +00003403* Patch by Guillaume Alexandre,, 04 Nov 2002:
3404 Improve PCI access on 32-bits Compact PCI bus
3405
wdenk24ee89b2002-11-03 17:56:27 +00003406* Fix mdelay() on TRAB - this was still the debugging version with
3407 seconds instead of ms.
3408
3409* Patch by Robert Schwebel, 1 Nov 2002:
3410 XScale related cleanup (affects all ARM boards)
3411
3412* Cleanup of names and README.
wdenkcc1c8a12002-11-02 22:58:18 +00003413
3414======================================================================
wdenk24ee89b2002-11-03 17:56:27 +00003415Notes for U-Boot 0.1.0:
wdenkcc1c8a12002-11-02 22:58:18 +00003416======================================================================
3417
3418This is the initial version of "Das U-Boot", the Universal Boot Loader.
3419
3420It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
3421For information about the history of the project please see the
3422PPCBoot project page at http://sourceforge.net/projects/ppcboot
3423
3424======================================================================