blob: 98303aceee9fd9be20e857c271aea6a81a4456e2 [file] [log] [blame]
Peter Pearse160131b2007-05-09 11:41:58 +01001/*
2 * This program is free software; you can redistribute it and/or
3 * modify it under the terms of the GNU General Public License as
4 * published by the Free Software Foundation; either version 2 of
5 * the License, or (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
15 * MA 02111-1307 USA
16 */
17
18#include <config.h>
19#include <common.h>
20#ifdef CONFIG_ENC28J60
21#include <net.h>
22#include <asm/arch/hardware.h>
23#include <asm/arch/spi.h>
24
25/*
26 * Control Registers in Bank 0
27 */
28
29#define CTL_REG_ERDPTL 0x00
30#define CTL_REG_ERDPTH 0x01
31#define CTL_REG_EWRPTL 0x02
32#define CTL_REG_EWRPTH 0x03
33#define CTL_REG_ETXSTL 0x04
34#define CTL_REG_ETXSTH 0x05
35#define CTL_REG_ETXNDL 0x06
36#define CTL_REG_ETXNDH 0x07
37#define CTL_REG_ERXSTL 0x08
38#define CTL_REG_ERXSTH 0x09
39#define CTL_REG_ERXNDL 0x0A
40#define CTL_REG_ERXNDH 0x0B
41#define CTL_REG_ERXRDPTL 0x0C
42#define CTL_REG_ERXRDPTH 0x0D
43#define CTL_REG_ERXWRPTL 0x0E
44#define CTL_REG_ERXWRPTH 0x0F
45#define CTL_REG_EDMASTL 0x10
46#define CTL_REG_EDMASTH 0x11
47#define CTL_REG_EDMANDL 0x12
48#define CTL_REG_EDMANDH 0x13
49#define CTL_REG_EDMADSTL 0x14
50#define CTL_REG_EDMADSTH 0x15
51#define CTL_REG_EDMACSL 0x16
52#define CTL_REG_EDMACSH 0x17
53/* these are common in all banks */
54#define CTL_REG_EIE 0x1B
55#define CTL_REG_EIR 0x1C
56#define CTL_REG_ESTAT 0x1D
57#define CTL_REG_ECON2 0x1E
58#define CTL_REG_ECON1 0x1F
59
60/*
61 * Control Registers in Bank 1
62 */
63
64#define CTL_REG_EHT0 0x00
65#define CTL_REG_EHT1 0x01
66#define CTL_REG_EHT2 0x02
67#define CTL_REG_EHT3 0x03
68#define CTL_REG_EHT4 0x04
69#define CTL_REG_EHT5 0x05
70#define CTL_REG_EHT6 0x06
71#define CTL_REG_EHT7 0x07
72#define CTL_REG_EPMM0 0x08
73#define CTL_REG_EPMM1 0x09
74#define CTL_REG_EPMM2 0x0A
75#define CTL_REG_EPMM3 0x0B
76#define CTL_REG_EPMM4 0x0C
77#define CTL_REG_EPMM5 0x0D
78#define CTL_REG_EPMM6 0x0E
79#define CTL_REG_EPMM7 0x0F
80#define CTL_REG_EPMCSL 0x10
81#define CTL_REG_EPMCSH 0x11
82#define CTL_REG_EPMOL 0x14
83#define CTL_REG_EPMOH 0x15
84#define CTL_REG_EWOLIE 0x16
85#define CTL_REG_EWOLIR 0x17
86#define CTL_REG_ERXFCON 0x18
87#define CTL_REG_EPKTCNT 0x19
88
89/*
90 * Control Registers in Bank 2
91 */
92
93#define CTL_REG_MACON1 0x00
94#define CTL_REG_MACON2 0x01
95#define CTL_REG_MACON3 0x02
96#define CTL_REG_MACON4 0x03
97#define CTL_REG_MABBIPG 0x04
98#define CTL_REG_MAIPGL 0x06
99#define CTL_REG_MAIPGH 0x07
100#define CTL_REG_MACLCON1 0x08
101#define CTL_REG_MACLCON2 0x09
102#define CTL_REG_MAMXFLL 0x0A
103#define CTL_REG_MAMXFLH 0x0B
104#define CTL_REG_MAPHSUP 0x0D
105#define CTL_REG_MICON 0x11
106#define CTL_REG_MICMD 0x12
107#define CTL_REG_MIREGADR 0x14
108#define CTL_REG_MIWRL 0x16
109#define CTL_REG_MIWRH 0x17
110#define CTL_REG_MIRDL 0x18
111#define CTL_REG_MIRDH 0x19
112
113/*
114 * Control Registers in Bank 3
115 */
116
117#define CTL_REG_MAADR1 0x00
118#define CTL_REG_MAADR0 0x01
119#define CTL_REG_MAADR3 0x02
120#define CTL_REG_MAADR2 0x03
121#define CTL_REG_MAADR5 0x04
122#define CTL_REG_MAADR4 0x05
123#define CTL_REG_EBSTSD 0x06
124#define CTL_REG_EBSTCON 0x07
125#define CTL_REG_EBSTCSL 0x08
126#define CTL_REG_EBSTCSH 0x09
127#define CTL_REG_MISTAT 0x0A
128#define CTL_REG_EREVID 0x12
129#define CTL_REG_ECOCON 0x15
130#define CTL_REG_EFLOCON 0x17
131#define CTL_REG_EPAUSL 0x18
132#define CTL_REG_EPAUSH 0x19
133
134
135/*
136 * PHY Register
137 */
138
139#define PHY_REG_PHID1 0x02
140#define PHY_REG_PHID2 0x03
141/* taken from the Linux driver */
142#define PHY_REG_PHCON1 0x00
143#define PHY_REG_PHCON2 0x10
144#define PHY_REG_PHLCON 0x14
145
146/*
147 * Receive Filter Register (ERXFCON) bits
148 */
149
150#define ENC_RFR_UCEN 0x80
151#define ENC_RFR_ANDOR 0x40
152#define ENC_RFR_CRCEN 0x20
153#define ENC_RFR_PMEN 0x10
154#define ENC_RFR_MPEN 0x08
155#define ENC_RFR_HTEN 0x04
156#define ENC_RFR_MCEN 0x02
157#define ENC_RFR_BCEN 0x01
158
159/*
160 * ECON1 Register Bits
161 */
162
163#define ENC_ECON1_TXRST 0x80
164#define ENC_ECON1_RXRST 0x40
165#define ENC_ECON1_DMAST 0x20
166#define ENC_ECON1_CSUMEN 0x10
167#define ENC_ECON1_TXRTS 0x08
168#define ENC_ECON1_RXEN 0x04
169#define ENC_ECON1_BSEL1 0x02
170#define ENC_ECON1_BSEL0 0x01
171
172/*
173 * ECON2 Register Bits
174 */
175#define ENC_ECON2_AUTOINC 0x80
176#define ENC_ECON2_PKTDEC 0x40
177#define ENC_ECON2_PWRSV 0x20
178#define ENC_ECON2_VRPS 0x08
179
180/*
181 * EIR Register Bits
182 */
183#define ENC_EIR_PKTIF 0x40
184#define ENC_EIR_DMAIF 0x20
185#define ENC_EIR_LINKIF 0x10
186#define ENC_EIR_TXIF 0x08
187#define ENC_EIR_WOLIF 0x04
188#define ENC_EIR_TXERIF 0x02
189#define ENC_EIR_RXERIF 0x01
190
191/*
192 * ESTAT Register Bits
193 */
194
195#define ENC_ESTAT_INT 0x80
196#define ENC_ESTAT_LATECOL 0x10
197#define ENC_ESTAT_RXBUSY 0x04
198#define ENC_ESTAT_TXABRT 0x02
199#define ENC_ESTAT_CLKRDY 0x01
200
201/*
202 * EIE Register Bits
203 */
204
205#define ENC_EIE_INTIE 0x80
206#define ENC_EIE_PKTIE 0x40
207#define ENC_EIE_DMAIE 0x20
208#define ENC_EIE_LINKIE 0x10
209#define ENC_EIE_TXIE 0x08
210#define ENC_EIE_WOLIE 0x04
211#define ENC_EIE_TXERIE 0x02
212#define ENC_EIE_RXERIE 0x01
213
214/*
215 * MACON1 Register Bits
216 */
217#define ENC_MACON1_LOOPBK 0x10
218#define ENC_MACON1_TXPAUS 0x08
219#define ENC_MACON1_RXPAUS 0x04
220#define ENC_MACON1_PASSALL 0x02
221#define ENC_MACON1_MARXEN 0x01
222
223
224/*
225 * MACON2 Register Bits
226 */
227#define ENC_MACON2_MARST 0x80
228#define ENC_MACON2_RNDRST 0x40
229#define ENC_MACON2_MARXRST 0x08
230#define ENC_MACON2_RFUNRST 0x04
231#define ENC_MACON2_MATXRST 0x02
232#define ENC_MACON2_TFUNRST 0x01
233
234/*
235 * MACON3 Register Bits
236 */
237#define ENC_MACON3_PADCFG2 0x80
238#define ENC_MACON3_PADCFG1 0x40
239#define ENC_MACON3_PADCFG0 0x20
240#define ENC_MACON3_TXCRCEN 0x10
241#define ENC_MACON3_PHDRLEN 0x08
242#define ENC_MACON3_HFRMEN 0x04
243#define ENC_MACON3_FRMLNEN 0x02
244#define ENC_MACON3_FULDPX 0x01
245
246/*
247 * MICMD Register Bits
248 */
249#define ENC_MICMD_MIISCAN 0x02
250#define ENC_MICMD_MIIRD 0x01
251
252/*
253 * MISTAT Register Bits
254 */
255#define ENC_MISTAT_NVALID 0x04
256#define ENC_MISTAT_SCAN 0x02
257#define ENC_MISTAT_BUSY 0x01
258
259/*
260 * PHID1 and PHID2 values
261 */
262#define ENC_PHID1_VALUE 0x0083
263#define ENC_PHID2_VALUE 0x1400
264#define ENC_PHID2_MASK 0xFC00
265
266
267#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
268#define ENC_RESET 0x00020000 /* pin P1.17 */
269
270#define FAILSAFE_VALUE 5000
271
272/*
273 * Controller memory layout:
274 *
275 * 0x0000 - 0x17ff 6k bytes receive buffer
276 * 0x1800 - 0x1fff 2k bytes transmit buffer
277 */
278/* Use the lower memory for receiver buffer. See errata pt. 5 */
279#define ENC_RX_BUF_START 0x0000
280#define ENC_TX_BUF_START 0x1800
281/* taken from the Linux driver */
282#define ENC_RX_BUF_END 0x17ff
283#define ENC_TX_BUF_END 0x1fff
284
285/* maximum frame length */
286#define ENC_MAX_FRM_LEN 1518
287
288#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
289#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
290#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
291
292
293static unsigned char encReadReg (unsigned char regNo);
294static void encWriteReg (unsigned char regNo, unsigned char data);
295static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
296static void encReadBuff (unsigned short length, unsigned char *pBuff);
297static void encWriteBuff (unsigned short length, unsigned char *pBuff);
298static void encBitSet (unsigned char regNo, unsigned char data);
299static void encBitClr (unsigned char regNo, unsigned char data);
300static void encReset (void);
301static void encInit (unsigned char *pEthAddr);
302static unsigned short phyRead (unsigned char addr);
303static void phyWrite(unsigned char, unsigned short);
304static void encPoll (void);
305static void encRx (void);
306
307#define m_nic_read(reg) encReadReg(reg)
308#define m_nic_write(reg, data) encWriteReg(reg, data)
309#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
310#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
311#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
312
313/* bit field set */
314#define m_nic_bfs(reg, data) encBitSet(reg, data)
315
316/* bit field clear */
317#define m_nic_bfc(reg, data) encBitClr(reg, data)
318
319static unsigned char bank = 0; /* current bank in enc28j60 */
320static unsigned char next_pointer_lsb;
321static unsigned char next_pointer_msb;
322
323static unsigned char buffer[ENC_MAX_FRM_LEN];
324static int rxResetCounter = 0;
325
326#define RX_RESET_COUNTER 1000;
327
328/*-----------------------------------------------------------------------------
329 * Always returns 0
330 */
331int eth_init (bd_t * bis)
332{
333 unsigned char estatVal;
334
335 /* configure GPIO */
336 (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
337 (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
338
339 /* CS and RESET active low */
340 PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
341 PUT32 (IO1SET, ENC_RESET);
342
343 spi_init ();
344
345 /* taken from the Linux driver - dangerous stuff here! */
346 /* Wait for CLKRDY to become set (i.e., check that we can communicate with
347 the ENC) */
348 do
349 {
350 estatVal = m_nic_read(CTL_REG_ESTAT);
351 } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
352
353 /* initialize controller */
354 encReset ();
355 encInit (bis->bi_enetaddr);
356
357 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
358
359 return 0;
360}
361
362int eth_send (volatile void *packet, int length)
363{
364 /* check frame length, etc. */
365 /* TODO: */
366
367 /* switch to bank 0 */
368 m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
369
370 /* set EWRPT */
371 m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
372 m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
373
374 /* set ETXND */
375 m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
376 m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
377
378 /* set ETXST */
379 m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
380 m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
381
382 /* write packet */
383 m_nic_write_data (length, (unsigned char *) packet);
384
385 /* taken from the Linux driver */
386 /* Verify that the internal transmit logic has not been altered by excessive
387 collisions. See Errata B4 12 and 14.
388 */
389 if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
390 m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
391 m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
392 }
393 m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
394
395 /* set ECON1.TXRTS */
396 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
397
398 return 0;
399}
400
401
402/*****************************************************************************
403 * This function resets the receiver only. This function may be called from
404 * interrupt-context.
405 */
406static void encReceiverReset (void)
407{
408 unsigned char econ1;
409
410 econ1 = m_nic_read (CTL_REG_ECON1);
411 if ((econ1 & ENC_ECON1_RXRST) == 0) {
412 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
413 rxResetCounter = RX_RESET_COUNTER;
414 }
415}
416
417/*****************************************************************************
418 * receiver reset timer
419 */
420static void encReceiverResetCallback (void)
421{
422 m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
423 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
424}
425
426/*-----------------------------------------------------------------------------
427 * Check for received packets. Call NetReceive for each packet. The return
428 * value is ignored by the caller.
429 */
430int eth_rx (void)
431{
432 if (rxResetCounter > 0 && --rxResetCounter == 0) {
433 encReceiverResetCallback ();
434 }
435
436 encPoll ();
437
438 return 0;
439}
440
441void eth_halt (void)
442{
443 m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
444}
445
446/*****************************************************************************/
447
448static void encPoll (void)
449{
450 unsigned char eir_reg;
451 volatile unsigned char estat_reg;
452 unsigned char pkt_cnt;
453
454#ifdef CONFIG_USE_IRQ
455 /* clear global interrupt enable bit in enc28j60 */
456 m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
457#endif
458 estat_reg = m_nic_read (CTL_REG_ESTAT);
459
460 eir_reg = m_nic_read (CTL_REG_EIR);
461
462 if (eir_reg & ENC_EIR_TXIF) {
463 /* clear TXIF bit in EIR */
464 m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
465 }
466
467 /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
468
469 /* move to bank 1 */
470 m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
471 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
472
473 /* read pktcnt */
474 pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
475
476 if (pkt_cnt > 0) {
477 if ((eir_reg & ENC_EIR_PKTIF) == 0) {
478 /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
479 }
480 encRx ();
481 /* clear PKTIF bit in EIR, this should not need to be done but it
482 seems like we get problems if we do not */
483 m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
484 }
485
486 if (eir_reg & ENC_EIR_RXERIF) {
487 printf ("encPoll: rx error\n");
488 m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
489 }
490 if (eir_reg & ENC_EIR_TXERIF) {
491 printf ("encPoll: tx error\n");
492 m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
493 }
494
495#ifdef CONFIG_USE_IRQ
496 /* set global interrupt enable bit in enc28j60 */
497 m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
498#endif
499}
500
501static void encRx (void)
502{
503 unsigned short pkt_len;
504 unsigned short copy_len;
505 unsigned short status;
506 unsigned char eir_reg;
507 unsigned char pkt_cnt = 0;
508 unsigned short rxbuf_rdpt;
509
510 /* switch to bank 0 */
511 m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
512
513 m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
514 m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
515
516 do {
517 m_nic_read_data (6, buffer);
518 next_pointer_lsb = buffer[0];
519 next_pointer_msb = buffer[1];
520 pkt_len = buffer[2];
521 pkt_len |= (unsigned short) buffer[3] << 8;
522 status = buffer[4];
523 status |= (unsigned short) buffer[5] << 8;
524
525 if (pkt_len <= ENC_MAX_FRM_LEN)
526 copy_len = pkt_len;
527 else
528 copy_len = 0;
529
530 if ((status & (1L << 7)) == 0) /* check Received Ok bit */
531 copy_len = 0;
532
533 /* taken from the Linux driver */
534 /* check if next pointer is resonable */
535 if ((((unsigned int)next_pointer_msb << 8) |
536 (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
537 copy_len = 0;
538
539 if (copy_len > 0) {
540 m_nic_read_data (copy_len, buffer);
541 }
542
543 /* advance read pointer to next pointer */
544 m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
545 m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
546
547 /* decrease packet counter */
548 m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
549
550 /* taken from the Linux driver */
Wolfgang Denk725671c2007-06-06 16:26:56 +0200551 /* Only odd values should be written to ERXRDPTL,
552 * see errata B4 pt.13
Peter Pearse3e3b9562007-05-18 16:47:03 +0100553 */
554 rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
Peter Pearse160131b2007-05-09 11:41:58 +0100555 if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
556 m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
557 (m_nic_read(CTL_REG_ERXNDH) << 8 |
558 m_nic_read(CTL_REG_ERXNDL)))) {
559 m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
560 m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
561 } else {
562 m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
563 m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
564 }
565
566 /* move to bank 1 */
567 m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
568 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
569
570 /* read pktcnt */
571 pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
572
573 /* switch to bank 0 */
574 m_nic_bfc (CTL_REG_ECON1,
575 (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
576
577 if (copy_len == 0) {
578 eir_reg = m_nic_read (CTL_REG_EIR);
579 encReceiverReset ();
580 printf ("eth_rx: copy_len=0\n");
581 continue;
582 }
583
584 NetReceive ((unsigned char *) buffer, pkt_len);
585
586 eir_reg = m_nic_read (CTL_REG_EIR);
587 } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
588}
589
590static void encWriteReg (unsigned char regNo, unsigned char data)
591{
592 spi_lock ();
593 enc_cfg_spi ();
594 enc_enable ();
595
596 spi_write (0x40 | regNo); /* write in regNo */
597 spi_write (data);
598
599 enc_disable ();
600 enc_enable ();
601
602 spi_write (0x1f); /* write reg 0x1f */
603
604 enc_disable ();
605 spi_unlock ();
606}
607
608static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
609{
610 unsigned char readback;
611 int i;
612
613 spi_lock ();
614
615 for (i = 0; i < c; i++) {
616 enc_cfg_spi ();
617 enc_enable ();
618
619 spi_write (0x40 | regNo); /* write in regNo */
620 spi_write (data);
621
622 enc_disable ();
623 enc_enable ();
624
625 spi_write (0x1f); /* write reg 0x1f */
626
627 enc_disable ();
628
629 spi_unlock (); /* we must unlock spi first */
630
631 readback = encReadReg (regNo);
632
633 spi_lock ();
634
635 if (readback == data)
636 break;
637 }
638 spi_unlock ();
639
640 if (i == c) {
641 printf ("enc28j60: write reg %d failed\n", regNo);
642 }
643}
644
645static unsigned char encReadReg (unsigned char regNo)
646{
647 unsigned char rxByte;
648
649 spi_lock ();
650 enc_cfg_spi ();
651 enc_enable ();
652
653 spi_write (0x1f); /* read reg 0x1f */
654
655 bank = spi_read () & 0x3;
656
657 enc_disable ();
658 enc_enable ();
659
660 spi_write (regNo);
661 rxByte = spi_read ();
662
663 /* check if MAC or MII register */
664 if (((bank == 2) && (regNo <= 0x1a)) ||
665 ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
666 /* ignore first byte and read another byte */
667 rxByte = spi_read ();
668 }
669
670 enc_disable ();
671 spi_unlock ();
672
673 return rxByte;
674}
675
676static void encReadBuff (unsigned short length, unsigned char *pBuff)
677{
678 spi_lock ();
679 enc_cfg_spi ();
680 enc_enable ();
681
682 spi_write (0x20 | 0x1a); /* read buffer memory */
683
684 while (length--) {
685 if (pBuff != NULL)
686 *pBuff++ = spi_read ();
687 else
688 spi_write (0);
689 }
690
691 enc_disable ();
692 spi_unlock ();
693}
694
695static void encWriteBuff (unsigned short length, unsigned char *pBuff)
696{
697 spi_lock ();
698 enc_cfg_spi ();
699 enc_enable ();
700
701 spi_write (0x60 | 0x1a); /* write buffer memory */
702
703 spi_write (0x00); /* control byte */
704
705 while (length--)
706 spi_write (*pBuff++);
707
708 enc_disable ();
709 spi_unlock ();
710}
711
712static void encBitSet (unsigned char regNo, unsigned char data)
713{
714 spi_lock ();
715 enc_cfg_spi ();
716 enc_enable ();
717
718 spi_write (0x80 | regNo); /* bit field set */
719 spi_write (data);
720
721 enc_disable ();
722 spi_unlock ();
723}
724
725static void encBitClr (unsigned char regNo, unsigned char data)
726{
727 spi_lock ();
728 enc_cfg_spi ();
729 enc_enable ();
730
731 spi_write (0xA0 | regNo); /* bit field clear */
732 spi_write (data);
733
734 enc_disable ();
735 spi_unlock ();
736}
737
738static void encReset (void)
739{
740 spi_lock ();
741 enc_cfg_spi ();
742 enc_enable ();
743
744 spi_write (0xff); /* soft reset */
745
746 enc_disable ();
747 spi_unlock ();
748
749 /* sleep 1 ms. See errata pt. 2 */
750 udelay (1000);
751}
752
753static void encInit (unsigned char *pEthAddr)
754{
755 unsigned short phid1 = 0;
756 unsigned short phid2 = 0;
757
758 /* switch to bank 0 */
759 m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
760
761 /*
762 * Setup the buffer space. The reset values are valid for the
763 * other pointers.
764 */
765 /* We shall not write to ERXST, see errata pt. 5. Instead we
766 have to make sure that ENC_RX_BUS_START is 0. */
767 m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
768 m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
769
770 /* taken from the Linux driver */
771 m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
772 m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
773
774 m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
775 m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
776
777 next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
778 next_pointer_msb = (ENC_RX_BUF_START >> 8);
779
780 /* verify identification */
781 phid1 = phyRead (PHY_REG_PHID1);
782 phid2 = phyRead (PHY_REG_PHID2);
783
784 if (phid1 != ENC_PHID1_VALUE
785 || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
786 printf ("ERROR: failed to identify controller\n");
787 printf ("phid1 = %x, phid2 = %x\n",
788 phid1, (phid2 & ENC_PHID2_MASK));
789 printf ("should be phid1 = %x, phid2 = %x\n",
790 ENC_PHID1_VALUE, ENC_PHID2_VALUE);
791 }
792
793 /*
794 * --- MAC Initialization ---
795 */
796
797 /* Pull MAC out of Reset */
798
799 /* switch to bank 2 */
800 m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
801 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
802
803 /* enable MAC to receive frames */
804 /* added some bits from the Linux driver */
Peter Pearse3e3b9562007-05-18 16:47:03 +0100805 m_nic_write_retry (CTL_REG_MACON1
806 ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
807 ,10);
Peter Pearse160131b2007-05-09 11:41:58 +0100808
809 /* configure pad, tx-crc and duplex */
810 /* added a bit from the Linux driver */
Peter Pearse3e3b9562007-05-18 16:47:03 +0100811 m_nic_write_retry (CTL_REG_MACON3
812 ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
813 ,10);
Peter Pearse160131b2007-05-09 11:41:58 +0100814
815 /* added 4 new lines from the Linux driver */
816 /* Allow infinite deferals if the medium is continously busy */
817 m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
818
819 /* Late collisions occur beyond 63 bytes */
820 m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
821
822 /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
823 m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
824
825 /*
826 * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
827 * 0x0c for half-duplex. Nothing for full-duplex
828 */
829 m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
830
831 /* set maximum frame length */
832 m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
833 m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
834
835 /*
836 * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
837 * and 0x15 for full duplex.
838 */
839 m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
840
841 /* set MAC address */
842
843 /* switch to bank 3 */
844 m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
845
846 m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
847 m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
848 m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
849 m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
850 m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
851 m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
852
853 /*
854 * PHY Initialization taken from the Linux driver
855 */
856
857 /* Prevent automatic loopback of data beeing transmitted by setting
858 ENC_PHCON2_HDLDIS */
859 phyWrite(PHY_REG_PHCON2, (1<<8));
860
861 /* LEDs configuration
862 * LEDA: LACFG = 0100 -> display link status
863 * LEDB: LBCFG = 0111 -> display TX & RX activity
864 * STRCH = 1 -> LED pulses
865 */
866 phyWrite(PHY_REG_PHLCON, 0x0472);
867
868 /* Reset PDPXMD-bit => half duplex */
869 phyWrite(PHY_REG_PHCON1, 0);
870
871 /*
872 * Receive settings
873 */
874
875#ifdef CONFIG_USE_IRQ
876 /* enable interrupts */
877 m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
878 m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
879 m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
880 m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
881 m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
882#endif
883}
884
885/*****************************************************************************
886 *
887 * Description:
888 * Read PHY registers.
889 *
890 * NOTE! This function will change to Bank 2.
891 *
892 * Params:
893 * [in] addr address of the register to read
894 *
895 * Returns:
896 * The value in the register
897 */
898static unsigned short phyRead (unsigned char addr)
899{
900 unsigned short ret = 0;
901
902 /* move to bank 2 */
903 m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
904 m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
905
906 /* write address to MIREGADR */
907 m_nic_write (CTL_REG_MIREGADR, addr);
908
909 /* set MICMD.MIIRD */
910 m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
911
912 /* taken from the Linux driver */
913 /* move to bank 3 */
914 m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
915 m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
916
917 /* poll MISTAT.BUSY bit until operation is complete */
918 while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
919 static int cnt = 0;
920
921 if (cnt++ >= 1000) {
922 /* GJ - this seems extremely dangerous! */
923 /* printf("#"); */
924 cnt = 0;
925 }
926 }
927
928 /* taken from the Linux driver */
929 /* move to bank 2 */
930 m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
931 m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
932
933 /* clear MICMD.MIIRD */
934 m_nic_write (CTL_REG_MICMD, 0);
935
936 ret = (m_nic_read (CTL_REG_MIRDH) << 8);
937 ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
938
939 return ret;
940}
941
942/*****************************************************************************
943 *
944 * Taken from the Linux driver.
945 * Description:
946 * Write PHY registers.
947 *
948 * NOTE! This function will change to Bank 3.
949 *
950 * Params:
951 * [in] addr address of the register to write to
952 * [in] data to be written
953 *
954 * Returns:
955 * None
956 */
957static void phyWrite(unsigned char addr, unsigned short data)
958{
959 /* move to bank 2 */
960 m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
961 m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
962
963 /* write address to MIREGADR */
964 m_nic_write(CTL_REG_MIREGADR, addr);
965
966 m_nic_write(CTL_REG_MIWRL, data & 0xff);
967 m_nic_write(CTL_REG_MIWRH, data >> 8);
968
969 /* move to bank 3 */
970 m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
971 m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
972
973 /* poll MISTAT.BUSY bit until operation is complete */
974 while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
975 static int cnt = 0;
976
977 if(cnt++ >= 1000) {
978 cnt = 0;
979 }
980 }
981}
982
983#endif /* CONFIG_ENC28J60 */