blob: 5e4778e97881dd35f6793ae108c3e82019938108 [file] [log] [blame]
Jens Scharsig77e72732010-02-03 22:48:09 +01001/*
2 * (C) Copyright 2008-2009
3 * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
4 * Jens Scharsig <esw@bus-elektronik.de>
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Jens Scharsig77e72732010-02-03 22:48:09 +01007 */
8
9#include <common.h>
10#include <exports.h>
11#include <net.h>
12#include <netdev.h>
13#include <nand.h>
14
15#include <asm/io.h>
16#include <asm/arch/hardware.h>
17#include <asm/arch/at91_pio.h>
18#include <asm/arch/at91_pmc.h>
19#include <asm/arch/at91_mc.h>
Andreas Bießmann5a05cb72011-06-12 01:49:15 +000020#include <asm/arch/at91_common.h>
Jens Scharsig77e72732010-02-03 22:48:09 +010021
22#ifdef CONFIG_STATUS_LED
23#include <status_led.h>
24#endif
25
26#ifdef CONFIG_VIDEO
27#include <bus_vcxk.h>
28
29extern unsigned long display_width;
30extern unsigned long display_height;
31#endif
32
33#ifdef CONFIG_CMD_NAND
34void cpux9k2_nand_hw_init(void);
35#endif
36
37DECLARE_GLOBAL_DATA_PTR;
38
39/*
40 * Miscelaneous platform dependent initialisations
41 */
42
43int board_init(void)
44{
Jens Scharsig80733992011-02-19 06:17:02 +000045 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
Jens Scharsig77e72732010-02-03 22:48:09 +010046
47 /* Correct IRDA resistor problem / Set PA23_TXD in Output */
Jens Scharsig80733992011-02-19 06:17:02 +000048 writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
Jens Scharsig77e72732010-02-03 22:48:09 +010049
50 gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
51 /* adress of boot parameters */
Jens Scharsigcebcf7d2010-10-19 19:37:15 +020052 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
Jens Scharsig77e72732010-02-03 22:48:09 +010053
54#ifdef CONFIG_STATUS_LED
55 status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
56#endif
57#ifdef CONFIG_CMD_NAND
58 cpux9k2_nand_hw_init();
59#endif
60 return 0;
61}
62
Andreas Bießmann5a05cb72011-06-12 01:49:15 +000063int board_early_init_f(void)
64{
65 at91_seriald_hw_init();
66 return 0;
67}
68
Jens Scharsig77e72732010-02-03 22:48:09 +010069#ifdef CONFIG_MISC_INIT_R
70
71int misc_init_r(void)
72{
73 uchar mac[8];
74 uchar tm;
75 uchar midx;
76 uchar macn6, macn7;
77
Jens Scharsig77e72732010-02-03 22:48:09 +010078 if (getenv("ethaddr") == NULL) {
79 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
80 CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
81 (uchar *) &mac, sizeof(mac)) != 0) {
82 puts("Error reading MAC from EEPROM\n");
83 } else {
84 tm = 0;
85 macn6 = 0;
86 macn7 = 0xFF;
87 for (midx = 0; midx < 6; midx++) {
88 if ((mac[midx] != 0) && (mac[midx] != 0xFF))
89 tm++;
90 macn6 += mac[midx];
91 macn7 ^= mac[midx];
92 }
93 if ((macn6 != mac[6]) || (macn7 != mac[7]))
94 tm = 0;
95 if (tm)
96 eth_setenv_enetaddr("ethaddr", mac);
97 else
98 puts("Error: invalid MAC at EEPROM\n");
99 }
100 }
Jens Scharsig77e72732010-02-03 22:48:09 +0100101 gd->jt[XF_do_reset] = (void *) do_reset;
102
103#ifdef CONFIG_STATUS_LED
104 status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
105#endif
106 return 0;
107}
108#endif
109
110#ifdef CONFIG_RESET_PHY_R
111void reset_phy(void)
112{
113 udelay(10000);
114 eth_init(gd->bd);
115}
116#endif
117
118/*
119 * DRAM initialisations
120 */
121
122int dram_init(void)
123{
Albert ARIBAUDa55d23c2011-07-03 05:55:33 +0000124 gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
Jens Scharsigcebcf7d2010-10-19 19:37:15 +0200125 CONFIG_SYS_SDRAM_SIZE);
Jens Scharsig77e72732010-02-03 22:48:09 +0100126 return 0;
127}
128
129/*
130 * Ethernet initialisations
131 */
132
133#ifdef CONFIG_DRIVER_AT91EMAC
134int board_eth_init(bd_t *bis)
135{
136 int rc = 0;
Jens Scharsig80733992011-02-19 06:17:02 +0000137 rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
Jens Scharsig77e72732010-02-03 22:48:09 +0100138 return rc;
139}
140#endif
141
142/*
143 * Disk On Chip (NAND) Millenium initialization.
144 * The NAND lives in the CS2* space
145 */
146#if defined(CONFIG_CMD_NAND)
147
148#define MASK_ALE (1 << 22) /* our ALE is AD22 */
149#define MASK_CLE (1 << 21) /* our CLE is AD21 */
150
151void cpux9k2_nand_hw_init(void)
152{
153 unsigned long csr;
Jens Scharsig80733992011-02-19 06:17:02 +0000154 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
155 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
156 at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
Jens Scharsig77e72732010-02-03 22:48:09 +0100157
158 /* Setup Smart Media, fitst enable the address range of CS3 */
159 writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);
160
161 /* RWH = 1 | RWS = 0 | TDF = 1 | NWS = 3 */
162 csr = AT91_SMC_CSR_RWHOLD(1) | AT91_SMC_CSR_TDF(1) |
163 AT91_SMC_CSR_NWS(3) |
164 AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_8 |
165 AT91_SMC_CSR_WSEN;
166 writel(csr, &mc->smc.csr[3]);
167
Jens Scharsig80733992011-02-19 06:17:02 +0000168 writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
169 writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
Jens Scharsig77e72732010-02-03 22:48:09 +0100170 &pio->pioc.pdr);
171
172 /* Configure PC2 as input (signal Nand READY ) */
Jens Scharsig80733992011-02-19 06:17:02 +0000173 writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
174 writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
175 writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);
Jens Scharsig77e72732010-02-03 22:48:09 +0100176
177 /* PIOC clock enabling */
Jens Scharsig80733992011-02-19 06:17:02 +0000178 writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
Jens Scharsig77e72732010-02-03 22:48:09 +0100179}
180
181static void board_nand_hwcontrol(struct mtd_info *mtd,
182 int cmd, unsigned int ctrl)
183{
Jens Scharsig80733992011-02-19 06:17:02 +0000184 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
Jens Scharsig77e72732010-02-03 22:48:09 +0100185 struct nand_chip *this = mtd->priv;
186 ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
187
188 if (ctrl & NAND_CTRL_CHANGE) {
189 IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
190
191 if (ctrl & NAND_CLE)
192 IO_ADDR_W |= MASK_CLE;
193 if (ctrl & NAND_ALE)
194 IO_ADDR_W |= MASK_ALE;
195
196 if ((ctrl & NAND_NCE))
197 writel(1, &pio->pioc.codr);
198 else
199 writel(1, &pio->pioc.sodr);
200
201 this->IO_ADDR_W = (void *) IO_ADDR_W;
202 }
203 if (cmd != NAND_CMD_NONE)
204 writeb(cmd, this->IO_ADDR_W);
205}
206
207static int board_nand_dev_ready(struct mtd_info *mtd)
208{
Jens Scharsig80733992011-02-19 06:17:02 +0000209 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
Jens Scharsig77e72732010-02-03 22:48:09 +0100210 return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
211}
212
213int board_nand_init(struct nand_chip *nand)
214{
215 cpux9k2_nand_hw_init();
216 nand->ecc.mode = NAND_ECC_SOFT;
217 nand->cmd_ctrl = board_nand_hwcontrol;
218 nand->dev_ready = board_nand_dev_ready;
219 nand->chip_delay = 20;
220 return 0;
221}
222
223#endif
224
225#if defined(CONFIG_VIDEO)
226/*
227 * drv_video_init
228 * FUNCTION: initialize VCxK device
229 */
230
231int drv_video_init(void)
232{
233#ifdef CONFIG_SPLASH_SCREEN
234 unsigned long splash;
235#endif
236 char *s;
237 unsigned long csr;
Jens Scharsig80733992011-02-19 06:17:02 +0000238 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
239 at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
Jens Scharsig77e72732010-02-03 22:48:09 +0100240
241 printf("Init Video as ");
242 s = getenv("displaywidth");
243 if (s != NULL)
244 display_width = simple_strtoul(s, NULL, 10);
245 else
246 display_width = 256;
247 s = getenv("displayheight");
248 if (s != NULL)
249 display_height = simple_strtoul(s, NULL, 10);
250 else
251 display_height = 256;
252 printf("%ld x %ld pixel matrix\n", display_width, display_height);
253
Jens Scharsig3bb183b2012-04-29 04:15:15 +0000254 /* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */
255 csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) |
256 AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) |
Jens Scharsig77e72732010-02-03 22:48:09 +0100257 AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
258 AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
259 writel(csr, &mc->smc.csr[2]);
Jens Scharsig80733992011-02-19 06:17:02 +0000260 writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
Jens Scharsig77e72732010-02-03 22:48:09 +0100261
262 vcxk_init(display_width, display_height);
263#ifdef CONFIG_SPLASH_SCREEN
264 s = getenv("splashimage");
265 if (s != NULL) {
266 splash = simple_strtoul(s, NULL, 16);
267 printf("use splashimage: %lx\n", splash);
268 video_display_bitmap(splash, 0, 0);
269 }
270#endif
271 return 0;
272}
273#endif
274
Heiko Schocherea818db2013-01-29 08:53:15 +0100275#ifdef CONFIG_SYS_I2C_SOFT
Jens Scharsig77e72732010-02-03 22:48:09 +0100276
277void i2c_init_board(void)
278{
279 u32 pin;
Jens Scharsig80733992011-02-19 06:17:02 +0000280 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
281 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
Jens Scharsig77e72732010-02-03 22:48:09 +0100282
Jens Scharsig80733992011-02-19 06:17:02 +0000283 writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
284 pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
Jens Scharsig77e72732010-02-03 22:48:09 +0100285 writel(pin, &pio->pioa.idr);
286 writel(pin, &pio->pioa.pudr);
287 writel(pin, &pio->pioa.per);
288 writel(pin, &pio->pioa.oer);
289 writel(pin, &pio->pioa.sodr);
290}
291
292#endif
293
294/*--------------------------------------------------------------------------*/
295
296#ifdef CONFIG_STATUS_LED
297
298void __led_toggle(led_id_t mask)
299{
Jens Scharsig80733992011-02-19 06:17:02 +0000300 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
Jens Scharsig77e72732010-02-03 22:48:09 +0100301
302 if (readl(&pio->piod.odsr) & mask)
303 writel(mask, &pio->piod.codr);
304 else
305 writel(mask, &pio->piod.codr);
306}
307
308void __led_init(led_id_t mask, int state)
309{
Jens Scharsig80733992011-02-19 06:17:02 +0000310 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
311 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
Jens Scharsig77e72732010-02-03 22:48:09 +0100312
Jens Scharsig80733992011-02-19 06:17:02 +0000313 writel(1 << ATMEL_ID_PIOD, &pmc->pcer); /* Enable PIOB clock */
Jens Scharsig77e72732010-02-03 22:48:09 +0100314 /* Disable peripherals on LEDs */
315 writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
316 /* Enable pins as outputs */
317 writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer);
318 /* Turn all LEDs OFF */
319 writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr);
320
321 __led_set(mask, state);
322}
323
324void __led_set(led_id_t mask, int state)
325{
Jens Scharsig80733992011-02-19 06:17:02 +0000326 at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
Jens Scharsig77e72732010-02-03 22:48:09 +0100327 if (state == STATUS_LED_ON)
328 writel(mask, &pio->piod.codr);
329 else
330 writel(mask, &pio->piod.sodr);
331}
332
333#endif
334
335/*---------------------------------------------------------------------------*/
336
Wolfgang Denk54841ab2010-06-28 22:00:46 +0200337int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
Jens Scharsig77e72732010-02-03 22:48:09 +0100338{
339 int rcode = 0;
340 ulong side;
341 ulong bright;
342
343 switch (argc) {
344 case 3:
345 side = simple_strtoul(argv[1], NULL, 10);
346 bright = simple_strtoul(argv[2], NULL, 10);
347 if ((side >= 0) && (side <= 3) &&
348 (bright >= 0) && (bright <= 1000)) {
349 vcxk_setbrightness(side, bright);
350 rcode = 0;
351 } else {
352 printf("parameters out of range\n");
353 printf("Usage:\n%s\n", cmdtp->usage);
354 rcode = 1;
355 }
356 break;
357 default:
358 printf("Usage:\n%s\n", cmdtp->usage);
359 rcode = 1;
360 break;
361 }
362 return rcode;
363}
364
365/*---------------------------------------------------------------------------*/
366
367U_BOOT_CMD(
368 bright, 3, 0, do_brightness,
369 "bright - sets the display brightness\n",
370 " <side> <0..1000>\n side: 0/3=both; 1=first; 2=second\n"
371);
372
373/* EOF cpu9k2.c */