blob: 156e0fa8e16f79928c96a46c3684ceaceab58965 [file] [log] [blame]
Vikas Manocha9fa32b12014-11-18 10:42:22 -08001/*
2 * (C) Copyright 2014
3 * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_STV0991_H
9#define __CONFIG_STV0991_H
Vikas Manocha9fa32b12014-11-18 10:42:22 -080010#define CONFIG_SYS_DCACHE_OFF
Vikas Manocha9fa32b12014-11-18 10:42:22 -080011#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
12#define CONFIG_BOARD_EARLY_INIT_F
Vikas Manocha2ce4eaf2014-11-18 10:42:23 -080013
Vikas Manocha9fa32b12014-11-18 10:42:22 -080014#define CONFIG_SYS_CORTEX_R4
15
16#define CONFIG_SYS_GENERIC_BOARD
17#define CONFIG_SYS_NO_FLASH
18
19/* ram memory-related information */
20#define CONFIG_NR_DRAM_BANKS 1
21#define PHYS_SDRAM_1 0x00000000
22#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
23#define PHYS_SDRAM_1_SIZE 0x00198000
24
25#define CONFIG_ENV_SIZE 0x10000
26#define CONFIG_ENV_IS_IN_FLASH
27#define CONFIG_ENV_ADDR \
28 (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
29#define CONFIG_SYS_MAXARGS 16
30#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
31
32/* serial port (PL011) configuration */
Vikas Manocha9fa32b12014-11-18 10:42:22 -080033#define CONFIG_BAUDRATE 115200
Vikas Manocha39e47952014-12-01 12:27:54 -080034#define CONFIG_PL01X_SERIAL
Vikas Manocha9fa32b12014-11-18 10:42:22 -080035
36/* user interface */
37#define CONFIG_SYS_PROMPT "STV0991> "
Vikas Manochac55e7592014-11-18 10:42:24 -080038#define CONFIG_SYS_CBSIZE 1024
Vikas Manocha9fa32b12014-11-18 10:42:22 -080039#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
40 +sizeof(CONFIG_SYS_PROMPT) + 16)
41
42/* MISC */
43#define CONFIG_SYS_LOAD_ADDR 0x00000000
Vikas Manocha498b7c22014-12-01 12:27:53 -080044#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
Vikas Manocha9fa32b12014-11-18 10:42:22 -080045#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000
46#define CONFIG_SYS_INIT_SP_OFFSET \
47 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
48/* U-boot Load Address */
49#define CONFIG_SYS_TEXT_BASE 0x00010000
50#define CONFIG_SYS_INIT_SP_ADDR \
51 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
52
Vikas Manocha2ce4eaf2014-11-18 10:42:23 -080053/* GMAC related configs */
54
55#define CONFIG_MII
56#define CONFIG_PHYLIB
57#define CONFIG_CMD_NET
58#define CONFIG_DESIGNWARE_ETH
59#define CONFIG_DW_ALTDESCRIPTOR
60#define CONFIG_PHY_MICREL
61
62/* Command support defines */
63#define CONFIG_CMD_PING
64#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
65
Vikas Manochac55e7592014-11-18 10:42:24 -080066#include "config_cmd_default.h"
67#undef CONFIG_CMD_SAVEENV
68
69#define CONFIG_SYS_MEMTEST_START 0x0000
70#define CONFIG_SYS_MEMTEST_END 1024*1024
71#define CONFIG_CMD_MEMTEST
72
73/* Misc configuration */
74#define CONFIG_SYS_LONGHELP
75#define CONFIG_CMDLINE_EDITING
76
77#define CONFIG_BOOTDELAY 3
78#define CONFIG_BOOTCOMMAND "go 0x40040000"
79#define CONFIG_AUTOBOOT_KEYED
80#define CONFIG_AUTOBOOT_STOP_STR " "
81#define CONFIG_AUTOBOOT_PROMPT \
82 "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
83
Vikas Manocha9fa32b12014-11-18 10:42:22 -080084#endif /* __CONFIG_H */