blob: 79095694adbc932f1fa8259acc99f71e8320c29f [file] [log] [blame]
Sergey Kubushync74b2102007-08-10 20:26:18 +02001/*
2 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation; either version 2 of
7 * the License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
17 * MA 02111-1307 USA
18 */
19
20#ifndef __CONFIG_H
21#define __CONFIG_H
22#include <asm/sizes.h>
23
24/*=======*/
25/* Board */
26/*=======*/
27#define SCHMOOGIE
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020028#define CONFIG_SYS_NAND_LARGEPAGE
29#define CONFIG_SYS_USE_NAND
David Brownell7a4f5112009-05-15 23:47:12 +020030#define CONFIG_DISPLAY_CPUINFO
Sergey Kubushync74b2102007-08-10 20:26:18 +020031/*===================*/
32/* SoC Configuration */
33/*===================*/
34#define CONFIG_ARM926EJS /* arm926ejs CPU core */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020035#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
36#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
37#define CONFIG_SYS_HZ 1000
David Brownellf7904362009-05-15 23:44:08 +020038#define CONFIG_SOC_DM644X
Sergey Kubushync74b2102007-08-10 20:26:18 +020039/*=============*/
40/* Memory Info */
41/*=============*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020042#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
43#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */
44#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */
45#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
Sergey Kubushync74b2102007-08-10 20:26:18 +020046#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
47#define CONFIG_STACKSIZE (256*1024) /* regular stack */
48#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
49#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
Wolfgang Denk950a3922008-04-11 15:11:26 +020050#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
Sergey Kubushync74b2102007-08-10 20:26:18 +020051/*====================*/
52/* Serial Driver info */
53/*====================*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020054#define CONFIG_SYS_NS16550
55#define CONFIG_SYS_NS16550_SERIAL
David Brownell7ee38c02009-04-12 15:38:06 -070056#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020057#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */
David Brownell7239c5da2009-04-12 15:40:16 -070058#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */
Sergey Kubushync74b2102007-08-10 20:26:18 +020059#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
60#define CONFIG_BAUDRATE 115200 /* Default baud rate */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020061#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
Sergey Kubushync74b2102007-08-10 20:26:18 +020062/*===================*/
63/* I2C Configuration */
64/*===================*/
65#define CONFIG_HARD_I2C
66#define CONFIG_DRIVER_DAVINCI_I2C
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020067#define CONFIG_SYS_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
68#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
Sergey Kubushync74b2102007-08-10 20:26:18 +020069/*==================================*/
70/* Network & Ethernet Configuration */
71/*==================================*/
72#define CONFIG_DRIVER_TI_EMAC
73#define CONFIG_MII
74#define CONFIG_BOOTP_DEFAULT
75#define CONFIG_BOOTP_DNS
76#define CONFIG_BOOTP_DNS2
77#define CONFIG_BOOTP_SEND_HOSTNAME
78#define CONFIG_NET_RETRY_COUNT 10
79#define CONFIG_OVERWRITE_ETHADDR_ONCE
Ben Warren84535872009-05-26 00:34:07 -070080#define CONFIG_NET_MULTI
Sergey Kubushync74b2102007-08-10 20:26:18 +020081/*=====================*/
82/* Flash & Environment */
83/*=====================*/
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +020084#undef CONFIG_ENV_IS_IN_FLASH
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020085#define CONFIG_SYS_NO_FLASH
Jean-Christophe PLAGNIOL-VILLARDee4f3e22009-03-30 18:58:39 +020086#define CONFIG_NAND_DAVINCI
Jean-Christophe PLAGNIOL-VILLARD51bfee12008-09-10 22:47:58 +020087#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +020088#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */
89#define CONFIG_ENV_SIZE SZ_128K
Sergey Kubushync74b2102007-08-10 20:26:18 +020090#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
91#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020092#define CONFIG_SYS_NAND_BASE 0x02000000
93#define CONFIG_SYS_NAND_HW_ECC
94#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +020095#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
Wolfgang Denk2eb99ca2009-07-18 21:52:24 +020096#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
Sergey Kubushync74b2102007-08-10 20:26:18 +020097/*=====================*/
98/* Board related stuff */
99/*=====================*/
100#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200101#define CONFIG_SYS_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200102#define CONFIG_HAS_UID
103#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200104#define CONFIG_SYS_UID_ADDR 0x50 /* UID chip I2C address */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200105/*==============================*/
106/* U-Boot general configuration */
107/*==============================*/
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200108#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200109#define CONFIG_MISC_INIT_R
110#undef CONFIG_BOOTDELAY
111#define CONFIG_BOOTFILE "uImage" /* Boot file name */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200112#define CONFIG_SYS_PROMPT "U-Boot > " /* Monitor Command Prompt */
113#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
114#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */
115#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
116#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
117#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
Sergey Kubushync74b2102007-08-10 20:26:18 +0200118#define CONFIG_VERSION_VARIABLE
119#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120#define CONFIG_SYS_HUSH_PARSER
121#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Sergey Kubushync74b2102007-08-10 20:26:18 +0200122#define CONFIG_CMDLINE_EDITING
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200123#define CONFIG_SYS_LONGHELP
Sergey Kubushync74b2102007-08-10 20:26:18 +0200124#define CONFIG_CRC32_VERIFY
125#define CONFIG_MX_CYCLIC
126/*===================*/
127/* Linux Information */
128/*===================*/
129#define LINUX_BOOT_PARAM_ADDR 0x80000100
130#define CONFIG_CMDLINE_TAG
131#define CONFIG_SETUP_MEMORY_TAGS
132#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
133#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
134/*=================*/
135/* U-Boot commands */
136/*=================*/
137#include <config_cmd_default.h>
138#define CONFIG_CMD_ASKENV
139#define CONFIG_CMD_DHCP
140#define CONFIG_CMD_DIAG
141#define CONFIG_CMD_I2C
142#define CONFIG_CMD_MII
143#define CONFIG_CMD_PING
144#define CONFIG_CMD_SAVES
145#define CONFIG_CMD_DATE
146#define CONFIG_CMD_NAND
147#undef CONFIG_CMD_EEPROM
148#undef CONFIG_CMD_BDI
149#undef CONFIG_CMD_FPGA
150#undef CONFIG_CMD_SETGETDCR
151#undef CONFIG_CMD_FLASH
152#undef CONFIG_CMD_IMLS
153/*=======================*/
154/* KGDB support (if any) */
155/*=======================*/
156#ifdef CONFIG_CMD_KGDB
157#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
158#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
159#endif
160#endif /* __CONFIG_H */