blob: 734918a2bb577a58715a060c23896d3d8f52b4a6 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Stefan Roese5d6050f2014-12-10 10:15:23 +01002/*
3 * Copyright (C) 2014, Barco (www.barco.com)
Stefan Roese5d6050f2014-12-10 10:15:23 +01004 */
5
6#ifndef __PLATINUM_CONFIG_H__
7#define __PLATINUM_CONFIG_H__
8
Stefan Roese5d6050f2014-12-10 10:15:23 +01009/* SPL */
Stefan Roese5d6050f2014-12-10 10:15:23 +010010
11/* Location in NAND to read U-Boot from */
12#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
13
14#include "imx6_spl.h" /* common IMX6 SPL configuration */
15#include "mx6_common.h"
Stefan Roese5d6050f2014-12-10 10:15:23 +010016
17/*
Stefan Roese5d6050f2014-12-10 10:15:23 +010018 * Hardware configuration
19 */
20
Stefan Roese5d6050f2014-12-10 10:15:23 +010021/* UART config */
22#define CONFIG_MXC_UART
23#define CONFIG_MXC_UART_BASE UART1_BASE
Stefan Roese5d6050f2014-12-10 10:15:23 +010024
25/* I2C config */
26#define CONFIG_SYS_I2C
27#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)03544c62015-09-21 22:43:38 +020028#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
29#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
York Sunf8cb1012015-03-20 10:20:40 -070030#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
Stefan Roese5d6050f2014-12-10 10:15:23 +010031#define CONFIG_SYS_I2C_SPEED 100000
32
33/* MMC config */
Stefan Roese5d6050f2014-12-10 10:15:23 +010034#define CONFIG_SYS_FSL_ESDHC_ADDR 0
35#define CONFIG_SYS_FSL_USDHC_NUM 1
Stefan Roese5d6050f2014-12-10 10:15:23 +010036
37/* Ethernet config */
38#define CONFIG_FEC_MXC
39#define CONFIG_MII
40#define IMX_FEC_BASE ENET_BASE_ADDR
41
Stefan Roese5d6050f2014-12-10 10:15:23 +010042/* USB config */
Stefan Roese5d6050f2014-12-10 10:15:23 +010043#define CONFIG_MXC_USB_PORT 1
44#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
45#define CONFIG_MXC_USB_FLAGS 0
46
47/* Memory config */
48#define CONFIG_NR_DRAM_BANKS 1
49#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
50#ifndef PHYS_SDRAM_SIZE
51#define PHYS_SDRAM_SIZE (1024 << 20)
52#endif
53
54#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
55#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
56#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
57
58#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
59 GENERATED_GBL_DATA_SIZE)
60#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
61 CONFIG_SYS_INIT_SP_OFFSET)
62
63#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
64
Stefan Roese5d6050f2014-12-10 10:15:23 +010065#ifdef CONFIG_CMD_NAND
66
67/* NAND config */
Stefan Roese5d6050f2014-12-10 10:15:23 +010068#ifndef CONFIG_SYS_NAND_MAX_CHIPS
69#define CONFIG_SYS_NAND_MAX_CHIPS 2
70#endif
71#define CONFIG_SYS_MAX_NAND_DEVICE 1
72#define CONFIG_SYS_NAND_BASE 0x40000000
73#define CONFIG_SYS_NAND_5_ADDR_CYCLE
74#define CONFIG_SYS_NAND_ONFI_DETECTION
75
76/* DMA config, needed for GPMI/MXS NAND support */
Stefan Roese5d6050f2014-12-10 10:15:23 +010077
Stefan Roese5d6050f2014-12-10 10:15:23 +010078/* Environment in NAND */
Stefan Roese5d6050f2014-12-10 10:15:23 +010079#define CONFIG_ENV_OFFSET (16 << 20)
80#define CONFIG_ENV_SECT_SIZE (128 << 10)
81#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
82#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
83#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
84
85#else /* CONFIG_CMD_NAND */
86
87/* Environment in MMC */
88#define CONFIG_ENV_SIZE (8 << 10)
Stefan Roese5d6050f2014-12-10 10:15:23 +010089#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
90#define CONFIG_SYS_MMC_ENV_DEV 0
91
92#endif /* CONFIG_CMD_NAND */
93
94/*
95 * U-Boot configuration
96 */
97
Stefan Roese5d6050f2014-12-10 10:15:23 +010098/* Board startup config */
Stefan Roese5d6050f2014-12-10 10:15:23 +010099#define CONFIG_MISC_INIT_R
100
Stefan Roese5d6050f2014-12-10 10:15:23 +0100101#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
102#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
103 PHYS_SDRAM_SIZE - (12 << 20))
104
Stefan Roese5d6050f2014-12-10 10:15:23 +0100105#define CONFIG_BOOTCOMMAND "run bootubi_scr"
106
107/* Miscellaneous configurable options */
Stefan Roese5d6050f2014-12-10 10:15:23 +0100108#define CONFIG_PREBOOT
109
Stefan Roese5d6050f2014-12-10 10:15:23 +0100110/* MTD/UBI/UBIFS config */
Stefan Roese5d6050f2014-12-10 10:15:23 +0100111#define CONFIG_MTD_DEVICE
112#define CONFIG_MTD_PARTITIONS
Stefan Roese5d6050f2014-12-10 10:15:23 +0100113
Stefan Roese5d6050f2014-12-10 10:15:23 +0100114/*
115 * Environment configuration
116 */
117
118#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
119#define CONFIG_COMMON_ENV_UBI \
120 "setubipartition=env set ubipartition ubi\0" \
121 "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
122#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
123#define CONFIG_COMMON_ENV_UBI \
124 "setubipartition=env set ubipartition ubi$boot_vol\0" \
125 "setubirfs=env set ubirfs ubi0:rootfs\0"
126#endif
127
128#define CONFIG_COMMON_ENV_MISC \
129 "user=user\0" \
130 "project="CONFIG_PLATINUM_PROJECT"\0" \
131 "uimage=uImage\0" \
132 "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
133 "serverip=serverip\0" \
134 "memaddrlinux=0x10800000\0" \
135 "memaddrsrc=0x11000000\0" \
136 "memaddrdtb=0x12000000\0" \
137 "console=ttymxc0\0" \
138 "baudrate=115200\0" \
139 "boot_scr=boot.uboot\0" \
140 "boot_vol=0\0" \
Tom Rini43ede0b2017-10-22 17:55:07 -0400141 "mtdids="CONFIG_MTDIDS_DEFAULT"\0" \
142 "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
Stefan Roese5d6050f2014-12-10 10:15:23 +0100143 "mmcfs=ext2\0" \
144 "mmcrootpart=1\0" \
145 \
146 "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
147 "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
148 "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
149 "setubifilelinux=env set ubifilelinux boot/$uimage\0" \
150 "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
151 "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
152 "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
153 "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
154 \
155 "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
156 "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
157 "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
158 "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
159 "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
160 "$mmcfilelinux\0" \
161 "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
162 "$mmcfiledtb\0" \
163 \
164 "ubipart=ubi part $ubipartition\0" \
165 "ubimount=ubifsmount $ubirfs\0" \
166 \
167 "setbootargscommon=env set bootargs $bootargs " \
168 "console=$console,$baudrate enable_wait_mode=off\0" \
169 "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
170 "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
171 "setbootargsubirfs=env set bootargs $bootargs " \
172 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
173 "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
174 "nfsroot=$serverip:$nfspath,v3,tcp\0" \
175 "setbootargsmmcrfs=env set bootargs $bootargs " \
176 "root=$mmcrootdev rootwait rw\0" \
177 \
178 "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
179 "setbootargscommon setbootargsmtd setbootargsdhcp " \
180 "setbootargsnfsrfs;" \
181 "run loadtftpkernel loadtftpdtb;" \
182 "bootm $memaddrlinux - $memaddrdtb\0" \
183 "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
184 "run setubipartition setubirfs;" \
185 "run setbootargscommon setbootargsmtd " \
186 "setbootargsubirfs;" \
187 "run loadtftpkernel loadtftpdtb;" \
188 "bootm $memaddrlinux - $memaddrdtb\0" \
189 "bootubi=run setubipartition setubirfs setubifilelinux " \
190 "setubipfiledtb;" \
191 "run setbootargscommon setbootargsmtd " \
192 "setbootargsubirfs;" \
193 "run ubipart ubimount loadubikernel loadubidtb;" \
194 "bootm $memaddrlinux - $memaddrdtb\0" \
195 "bootubi_scr=run setubipartition setubirfs;" \
196 "run ubipart ubimount;" \
197 "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
198 "then source ${memaddrsrc}; else run bootubi; fi\0" \
199 "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
200 "setbootargscommon setbootargsmmcrfs;" \
201 "run loadmmckernel loadmmcdtb;" \
202 "bootm $memaddrlinux - $memaddrdtb\0" \
203 \
204 "bootcmd="CONFIG_BOOTCOMMAND"\0"
205
206#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
207 CONFIG_COMMON_ENV_UBI
208#endif /* __PLATINUM_CONFIG_H__ */