Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 4659eb24f1882f61d86d8638c94197b17dd88529 / . / drivers / usb / host / Kconfig
blob: 94ac969058e680a0c4bdccb414346382213d2446 [file] [log] [blame]
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]1#
2# USB Host Controller Drivers
3#
4comment "USB Host Controller Drivers"
5
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]6config USB_HOST
7 bool
8
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]9config USB_XHCI_HCD
10 bool "xHCI HCD (USB 3.0) support"
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]11 select USB_HOST
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]12 ---help---
13 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
14 "SuperSpeed" host controller hardware.
15
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]16if USB_XHCI_HCD
17
Masahiro Yamada10db7502016-06-04 07:35:04 +0900[diff] [blame]18config USB_XHCI_DWC3
19 bool "DesignWare USB3 DRD Core Support"
20 help
21 Say Y or if your system has a Dual Role SuperSpeed
22 USB controller based on the DesignWare USB3 IP Core.
23
Neil Armstrongca7fdc82018-04-11 17:08:00 +0200[diff] [blame]24config USB_XHCI_DWC3_OF_SIMPLE
25 bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
Jean-Jacques Hiblot103774b2018-04-12 10:41:10 +0200[diff] [blame]26 depends on DM_USB
Mark Kettenisaaa8d6b2019-06-30 18:01:54 +0200[diff] [blame]27 default y if ARCH_ROCKCHIP
Jean-Jacques Hiblotcc73ba92018-04-12 10:41:11 +0200[diff] [blame]28 default y if DRA7XX
Neil Armstrongca7fdc82018-04-11 17:08:00 +0200[diff] [blame]29 help
30 Support USB2/3 functionality in simple SoC integrations with
31 USB controller based on the DesignWare USB3 IP Core.
32
Stefan Roese81c1f6f2016-07-14 11:39:20 +0200[diff] [blame]33config USB_XHCI_MVEBU
34 bool "MVEBU USB 3.0 support"
35 default y
36 depends on ARCH_MVEBU
Konstantin Porotchkin81192b72017-02-12 11:10:30 +0200[diff] [blame]37 select DM_REGULATOR
Stefan Roese81c1f6f2016-07-14 11:39:20 +0200[diff] [blame]38 help
39 Choose this option to add support for USB 3.0 driver on mvebu
40 SoCs, which includes Armada8K, Armada3700 and other Armada
41 family SoCs.
42
Bin Mengd7cde282017-07-19 21:50:08 +0800[diff] [blame]43config USB_XHCI_PCI
44 bool "Support for PCI-based xHCI USB controller"
Bin Meng978f6a32017-07-19 21:51:07 +0800[diff] [blame]45 depends on DM_USB
Bin Mengd7cde282017-07-19 21:50:08 +0800[diff] [blame]46 default y if X86
47 help
48 Enables support for the PCI-based xHCI controller.
49
Kever Yangf7bb27a2016-09-21 11:35:42 +0800[diff] [blame]50config USB_XHCI_ROCKCHIP
51 bool "Support for Rockchip on-chip xHCI USB controller"
52 depends on ARCH_ROCKCHIP
Meng Dongyange85f00a2017-06-28 19:22:39 +0800[diff] [blame]53 depends on DM_REGULATOR
54 depends on DM_USB
Kever Yangf7bb27a2016-09-21 11:35:42 +0800[diff] [blame]55 default y
56 help
57 Enables support for the on-chip xHCI controller on Rockchip SoCs.
58
Marek Vasute1cc60c2017-10-15 15:01:29 +0200[diff] [blame]59config USB_XHCI_RCAR
60 bool "Renesas RCar USB 3.0 support"
61 default y
62 depends on ARCH_RMOBILE
63 help
64 Choose this option to add support for USB 3.0 driver on Renesas
65 RCar Gen3 SoCs.
66
Patrice Chotard40d1a312017-09-05 11:04:24 +0200[diff] [blame]67config USB_XHCI_STI
68 bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller"
69 depends on ARCH_STI
70 default y
71 help
72 Enables support for the on-chip xHCI controller on STMicroelectronics
73 STiH407 family SoCs. This is a driver for the dwc3 to provide the glue logic
74 to configure the controller.
75
Uri Mashiachef3f3b82017-02-23 15:39:36 +0200[diff] [blame]76config USB_XHCI_DRA7XX_INDEX
77 int "DRA7XX xHCI USB index"
78 range 0 1
79 default 0
80 depends on DRA7XX
81 help
82 Select the DRA7XX xHCI USB index.
83 Current supported values: 0, 1.
84
Ran Wang420b0eb2017-10-23 10:09:22 +0800[diff] [blame]85config USB_XHCI_FSL
86 bool "Support for NXP Layerscape on-chip xHCI USB controller"
87 default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2
88 depends on !SPL_NO_USB
89 help
90 Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
Rayagonda Kokatanur9cadf052020-04-09 09:23:15 +0530[diff] [blame]91
92config USB_XHCI_BRCM
93 bool "Broadcom USB3 Host XHCI controller"
94 depends on DM_USB
95 help
96 USB controller based on the Broadcom USB3 IP Core.
97 Supports USB2/3 functionality.
98
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]99endif # USB_XHCI_HCD
Alexey Brodkinfee331f2015-12-14 17:18:50 +0300[diff] [blame]100
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]101config USB_EHCI_HCD
102 bool "EHCI HCD (USB 2.0) support"
Tom Rini64d6ac52017-05-12 22:33:28 -0400[diff] [blame]103 default y if ARCH_MX5 || ARCH_MX6
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]104 select USB_HOST
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]105 ---help---
106 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
107 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
108 If your USB host controller supports USB 2.0, you will likely want to
109 configure this Host Controller Driver.
110
111 EHCI controllers are packaged with "companion" host controllers (OHCI
112 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
113 will connect to EHCI if the device is high speed, otherwise they
114 connect to a companion controller. If you configure EHCI, you should
115 probably configure the OHCI (for NEC and some other vendors) USB Host
116 Controller Driver or UHCI (for Via motherboards) Host Controller
117 Driver too.
118
119 You may want to read <file:Documentation/usb/ehci.txt>.
120
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]121if USB_EHCI_HCD
122
Wenyou Yang17b68b52016-08-05 08:57:35 +0800[diff] [blame]123config USB_EHCI_ATMEL
124 bool "Support for Atmel on-chip EHCI USB controller"
125 depends on ARCH_AT91
126 default y
127 ---help---
128 Enables support for the on-chip EHCI controller on Atmel chips.
129
Stefan Roesecd482252015-09-01 11:39:44 +0200[diff] [blame]130config USB_EHCI_MARVELL
Tom Rini80f1f322017-05-12 22:33:29 -0400[diff] [blame]131 bool "Support for Marvell on-chip EHCI USB controller"
132 depends on ARCH_MVEBU || KIRKWOOD || ORION5X
Stefan Roesecd482252015-09-01 11:39:44 +0200[diff] [blame]133 default y
134 ---help---
135 Enables support for the on-chip EHCI controller on MVEBU SoCs.
136
Lukasz Majewski400b9722019-04-04 12:26:55 +0200[diff] [blame]137config USB_EHCI_MX5
138 bool "Support for i.MX5 on-chip EHCI USB controller"
139 depends on ARCH_MX5
140 default n
141 help
142 Enables support for the on-chip EHCI controller on i.MX5 SoCs.
143
Nikita Kiryanov919e8022015-07-23 17:19:35 +0300[diff] [blame]144config USB_EHCI_MX6
Ye Li235f5e12019-10-24 10:29:32 -0300[diff] [blame]145 bool "Support for i.MX6/i.MX7ULP on-chip EHCI USB controller"
146 depends on ARCH_MX6 || ARCH_MX7ULP
Nikita Kiryanov919e8022015-07-23 17:19:35 +0300[diff] [blame]147 default y
148 ---help---
149 Enables support for the on-chip EHCI controller on i.MX6 SoCs.
150
Stefan Agner2deebe22016-07-13 00:25:36 -0700[diff] [blame]151config USB_EHCI_MX7
152 bool "Support for i.MX7 on-chip EHCI USB controller"
153 depends on ARCH_MX7
154 default y
155 ---help---
156 Enables support for the on-chip EHCI controller on i.MX7 SoCs.
157
Tom Rini1d1ab612017-05-12 22:33:30 -0400[diff] [blame]158config USB_EHCI_OMAP
159 bool "Support for OMAP3+ on-chip EHCI USB controller"
160 depends on ARCH_OMAP2PLUS
161 default y
162 ---help---
163 Enables support for the on-chip EHCI controller on OMAP3 and later
164 SoCs.
165
Marcel Ziswiler20df4b52019-03-25 17:24:54 +0100[diff] [blame]166config USB_EHCI_VF
167 bool "Support for Vybrid on-chip EHCI USB controller"
168 depends on ARCH_VF610
169 default y
170 help
171 Enables support for the on-chip EHCI controller on Vybrid SoCs.
172
Ye Li235f5e12019-10-24 10:29:32 -0300[diff] [blame]173if USB_EHCI_MX6 || USB_EHCI_MX7
Stefan Agnerc4483092016-07-13 00:25:38 -0700[diff] [blame]174
175config MXC_USB_OTG_HACTIVE
176 bool "USB Power pin high active"
177 ---help---
178 Set the USB Power pin polarity to be high active (PWR_POL)
179
180endif
181
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]182config USB_EHCI_MSM
183 bool "Support for Qualcomm on-chip EHCI USB controller"
184 depends on DM_USB
185 select USB_ULPI_VIEWPORT
Ramon Fried0ac0b6e2018-09-21 13:35:50 +0300[diff] [blame]186 select MSM8916_USB_PHY
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]187 default n
188 ---help---
189 Enables support for the on-chip EHCI controller on Qualcomm
190 Snapdragon SoCs.
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]191
Bin Menga11a5b82017-08-09 00:21:54 -0700[diff] [blame]192config USB_EHCI_PCI
193 bool "Support for PCI-based EHCI USB controller"
194 default y if X86
195 help
196 Enables support for the PCI-based EHCI controller.
197
Peter Robinson747fed52019-02-20 12:17:27 +0000[diff] [blame]198config USB_EHCI_TEGRA
199 bool "Support for NVIDIA Tegra on-chip EHCI USB controller"
200 depends on TEGRA
201 ---help---
202 Enable support for Tegra on-chip EHCI USB controller
203
Siva Durga Prasad Paladugu2cdc7782016-07-22 14:51:51 +0530[diff] [blame]204config USB_EHCI_ZYNQ
205 bool "Support for Xilinx Zynq on-chip EHCI USB controller"
206 depends on ARCH_ZYNQ
207 default y
208 ---help---
209 Enable support for Zynq on-chip EHCI USB controller
210
Alexey Brodkin90fbb282015-12-02 12:32:02 +0300[diff] [blame]211config USB_EHCI_GENERIC
212 bool "Support for generic EHCI USB controller"
213 depends on OF_CONTROL
214 depends on DM_USB
Jagan Teki29d280c2018-12-22 18:18:10 +0530[diff] [blame]215 default ARCH_SUNXI
Alexey Brodkin90fbb282015-12-02 12:32:02 +0300[diff] [blame]216 default n
217 ---help---
218 Enables support for generic EHCI controller.
219
Ran Wang91f4fb92017-12-20 10:34:20 +0800[diff] [blame]220config USB_EHCI_FSL
221 bool "Support for FSL on-chip EHCI USB controller"
222 default n
223 select CONFIG_EHCI_HCD_INIT_AFTER_RESET
224 ---help---
225 Enables support for the on-chip EHCI controller on FSL chips.
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]226endif # USB_EHCI_HCD
227
228config USB_OHCI_HCD
229 bool "OHCI HCD (USB 1.1) support"
230 ---help---
231 The Open Host Controller Interface (OHCI) is a standard for accessing
232 USB 1.1 host controller hardware. It does more in hardware than Intel's
233 UHCI specification. If your USB host controller follows the OHCI spec,
234 say Y. On most non-x86 systems, and on x86 hardware that's not using a
235 USB controller from Intel or VIA, this is appropriate. If your host
236 controller doesn't use PCI, this is probably appropriate. For a PCI
237 based system where you're not sure, the "lspci -v" entry will list the
238 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
239
Heiko Schocher991e6602019-07-16 10:49:07 +0200[diff] [blame]240config USB_OHCI_PCI
241 bool "Support for PCI-based OHCI USB controller"
242 depends on DM_USB
243 default n
244 help
245 Enables support for the PCI-based OHCI controller.
246
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]247if USB_OHCI_HCD
248
249config USB_OHCI_GENERIC
250 bool "Support for generic OHCI USB controller"
251 depends on OF_CONTROL
252 depends on DM_USB
Jagan Teki29d280c2018-12-22 18:18:10 +0530[diff] [blame]253 default ARCH_SUNXI
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]254 select USB_HOST
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]255 ---help---
256 Enables support for generic OHCI controller.
257
Adam Ford9da54742019-04-30 05:21:41 -0500[diff] [blame]258config USB_OHCI_DA8XX
259 bool "Support for da850 OHCI USB controller"
260 help
261 Enable support for the da850 USB controller.
262
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]263endif # USB_OHCI_HCD
Masahiro Yamada96d82842016-08-01 00:16:33 +0900[diff] [blame]264
265config USB_UHCI_HCD
266 bool "UHCI HCD (most Intel and VIA) support"
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]267 select USB_HOST
Masahiro Yamada96d82842016-08-01 00:16:33 +0900[diff] [blame]268 ---help---
269 The Universal Host Controller Interface is a standard by Intel for
270 accessing the USB hardware in the PC (which is also called the USB
271 host controller). If your USB host controller conforms to this
272 standard, you may want to say Y, but see below. All recent boards
273 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
274 i810, i820) conform to this standard. Also all VIA PCI chipsets
275 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
276 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
277 If unsure, say Y.
278
279if USB_UHCI_HCD
280
281endif # USB_UHCI_HCD
Philipp Tomsich4ac72f52017-07-03 18:30:06 +0200[diff] [blame]282
283config USB_DWC2
284 bool "DesignWare USB2 Core support"
285 select USB_HOST
286 ---help---
287 The DesignWare USB 2.0 controller is compliant with the
288 USB-Implementers Forum (USB-IF) USB 2.0 specifications.
289 Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps)
290 operation is compliant to the controller Supplement. If you want to
291 enable this controller in host mode, say Y.
Alexey Brodkin42637fd2018-02-28 16:16:58 +0300[diff] [blame]292
293if USB_DWC2
294config USB_DWC2_BUFFER_SIZE
295 int "Data buffer size in kB"
296 default 64
297 ---help---
298 By default 64 kB buffer is used but if amount of RAM avaialble on
299 the target is not enough to accommodate allocation of buffer of
300 that size it is possible to shrink it. Smaller sizes should be fine
301 because larger transactions could be split in smaller ones.
302
303endif # USB_DWC2
Marek Vasuta3d65652019-08-11 13:23:43 +0200[diff] [blame]304
305config USB_R8A66597_HCD
306 bool "Renesas R8A66597 USB Core support"
307 depends on OF_CONTROL
308 depends on DM_USB
309 select USB_HOST
310 ---help---
311 This enables support for the on-chip Renesas R8A66597 USB 2.0
312 controller, present in various RZ and SH SoCs.