blob: ff52f8449f08ef16ba27cde783ac62de92c65d61 [file] [log] [blame]
Heiko Schocher381e4e62008-01-11 01:12:06 +01001/*
2 * (C) Copyright 2007
3 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC866 1 /* This is a MPC866 CPU */
37#define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */
38
Heiko Schocher82afabf2008-03-07 08:15:28 +010039/* Do boardspecific init */
40#define CONFIG_BOARD_EARLY_INIT_R 1
41
Heiko Schocher381e4e62008-01-11 01:12:06 +010042#define CONFIG_8xx_GCLK_FREQ 66000000
43
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020044#define CONFIG_SYS_SMC_UCODE_PATCH 1 /* Relocate SMC1 */
45#define CONFIG_SYS_SMC_DPMEM_OFFSET 0x1fc0
Heiko Schocher381e4e62008-01-11 01:12:06 +010046#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
47
48#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
49
50#define CONFIG_BOOTCOUNT_LIMIT
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020051#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR 0x1eb0 /* In case of SMC relocation, the
Heiko Schocherf7e51b22008-10-15 09:41:33 +020052 * default value is not working */
Heiko Schocher381e4e62008-01-11 01:12:06 +010053
54#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
55
56#define CONFIG_BOARD_TYPES 1 /* support board types */
57
58#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010059 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
Heiko Schocher381e4e62008-01-11 01:12:06 +010060 "echo"
61
62#undef CONFIG_BOOTARGS
63
Detlev Zundelc61e0332008-04-03 14:18:48 +020064#define CONFIG_EXTRA_ENV_SETTINGS \
65 "netdev=eth0\0" \
Detlev Zundelf3085722008-04-03 14:18:47 +020066 "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \
Detlev Zundelc61e0332008-04-03 14:18:48 +020067 "nfsargs=setenv bootargs root=/dev/nfs rw " \
68 "nfsroot=${serverip}:${rootpath}\0" \
69 "ramargs=setenv bootargs root=/dev/ram rw\0" \
70 "addip=setenv bootargs ${bootargs} " \
71 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
72 ":${hostname}:${netdev}:off panic=1\0" \
73 "flash_nfs=run nfsargs addip;" \
74 "bootm ${kernel_addr}\0" \
75 "flash_self=run ramargs addip;" \
76 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
77 "net_nfs=tftp ${kernel_addr} ${bootfile}; " \
78 "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;" \
79 "bootm ${kernel_addr} - ${fdt_addr}\0" \
80 "rootpath=/opt/eldk/ppc_8xx\0" \
81 "bootfile=/tftpboot/mgsuvd/uImage\0" \
82 "fdt_addr=400000\0" \
83 "kernel_addr=200000\0" \
84 "fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0" \
85 "load=tftp 200000 ${u-boot}\0" \
86 "update=protect off f0000000 +${filesize};" \
87 "erase f0000000 +${filesize};" \
88 "cp.b 200000 f0000000 ${filesize};" \
89 "protect on f0000000 +${filesize}\0" \
Heiko Schocher381e4e62008-01-11 01:12:06 +010090 ""
91#define CONFIG_BOOTCOMMAND "run flash_self"
92
93#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020094#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
Heiko Schocher381e4e62008-01-11 01:12:06 +010095
96#undef CONFIG_WATCHDOG /* watchdog disabled */
97
98/*
99 * BOOTP options
100 */
101#define CONFIG_BOOTP_SUBNETMASK
102#define CONFIG_BOOTP_GATEWAY
103#define CONFIG_BOOTP_HOSTNAME
104#define CONFIG_BOOTP_BOOTPATH
105#define CONFIG_BOOTP_BOOTFILESIZE
106
107#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */
108
109#define CONFIG_TIMESTAMP /* but print image timestmps */
110
111/*
112 * Command line configuration.
113 */
114#include <config_cmd_default.h>
115
116#define CONFIG_CMD_ASKENV
117#define CONFIG_CMD_DHCP
Heiko Schochere5e4edd2008-10-15 09:38:07 +0200118#define CONFIG_CMD_DTT
Heiko Schocherf2202452008-10-15 09:36:33 +0200119#define CONFIG_CMD_EEPROM
Heiko Schocher9661bf92008-10-15 09:36:03 +0200120#define CONFIG_CMD_I2C
Heiko Schocher381e4e62008-01-11 01:12:06 +0100121#define CONFIG_CMD_NFS
122#define CONFIG_CMD_PING
123
124/*
125 * Miscellaneous configurable options
126 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127#define CONFIG_SYS_LONGHELP /* undef to save memory */
128#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100129
130#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
132#ifdef CONFIG_SYS_HUSH_PARSER
133#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Heiko Schocher8f64da72008-10-15 09:41:00 +0200134#define CONFIG_HUSH_INIT_VAR 1
Heiko Schocher381e4e62008-01-11 01:12:06 +0100135#endif
136
137#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100139#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200140#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100141#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200142#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
143#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
144#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100145
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
147#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100148
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200149#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100150
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200151#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100152
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
Heiko Schocher381e4e62008-01-11 01:12:06 +0100154
155/*
156 * Low Level Configuration Settings
157 * (address mappings, register initial values, etc.)
158 * You should know what you are doing if you make changes here.
159 */
160/*-----------------------------------------------------------------------
161 * Internal Memory Mapped Register
162 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163#define CONFIG_SYS_IMMR 0xFFF00000
Heiko Schocher381e4e62008-01-11 01:12:06 +0100164
165/*-----------------------------------------------------------------------
166 * Definitions for initial stack pointer and data area (in DPRAM)
167 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200168#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
169#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
170#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
171#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
172#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Heiko Schocher381e4e62008-01-11 01:12:06 +0100173
174/*-----------------------------------------------------------------------
175 * Start addresses for the final memory configuration
176 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
Heiko Schocher381e4e62008-01-11 01:12:06 +0100178 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200179#define CONFIG_SYS_SDRAM_BASE 0x00000000
180#define CONFIG_SYS_FLASH_BASE 0xf0000000
181#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
182#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
183#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100184
185/*
186 * For booting Linux, the board info and command line data
187 * have to be in the first 8 MB of memory, since this is
188 * the maximum mapped by the Linux kernel during initialization.
189 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200190#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100191
192/*-----------------------------------------------------------------------
193 * FLASH organization
194 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200195#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
196#define CONFIG_SYS_FLASH_SIZE 32
197#define CONFIG_SYS_FLASH_CFI
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200198#define CONFIG_FLASH_CFI_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100200
201
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200202#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
203#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100204
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200205#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200206#define CONFIG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
207#define CONFIG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
Heiko Schocher53ebf0c2008-10-17 18:23:27 +0200208#define CONFIG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100209
210/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200211#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
212#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Heiko Schocher381e4e62008-01-11 01:12:06 +0100213
Heiko Schocher381e4e62008-01-11 01:12:06 +0100214/*-----------------------------------------------------------------------
215 * Cache Configuration
216 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200217#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100218#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200219#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100220#endif
221
222/*-----------------------------------------------------------------------
223 * SYPCR - System Protection Control 11-9
224 * SYPCR can only be written once after reset!
225 *-----------------------------------------------------------------------
226 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
227 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200228#define CONFIG_SYS_SYPCR 0xffffff89
Heiko Schocher381e4e62008-01-11 01:12:06 +0100229
230/*-----------------------------------------------------------------------
231 * SIUMCR - SIU Module Configuration 11-6
232 *-----------------------------------------------------------------------
233 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200234#define CONFIG_SYS_SIUMCR 0x00610480
Heiko Schocher381e4e62008-01-11 01:12:06 +0100235
236/*-----------------------------------------------------------------------
237 * TBSCR - Time Base Status and Control 11-26
238 *-----------------------------------------------------------------------
239 * Clear Reference Interrupt Status, Timebase freezing enabled
240 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200241#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
Heiko Schocher381e4e62008-01-11 01:12:06 +0100242
243/*-----------------------------------------------------------------------
244 * PISCR - Periodic Interrupt Status and Control 11-31
245 *-----------------------------------------------------------------------
246 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
247 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
Heiko Schocher381e4e62008-01-11 01:12:06 +0100249
250/*-----------------------------------------------------------------------
251 * SCCR - System Clock and reset Control Register 15-27
252 *-----------------------------------------------------------------------
253 * Set clock output, timebase and RTC source and divider,
254 * power management and some other internal clocks
255 */
256#define SCCR_MASK 0x01800000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200257#define CONFIG_SYS_SCCR 0x01800000
Heiko Schocher381e4e62008-01-11 01:12:06 +0100258
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200259#define CONFIG_SYS_DER 0
Heiko Schocher381e4e62008-01-11 01:12:06 +0100260
261/*
262 * Init Memory Controller:
263 *
264 * BR0/1 and OR0/1 (FLASH)
265 */
266
267#define FLASH_BASE0_PRELIM 0xf0000000 /* FLASH bank #0 */
268
269/* used to re-map FLASH both when starting from SRAM or FLASH:
270 * restrict access enough to keep SRAM working (if any)
271 * but not too much to meddle with FLASH accesses
272 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
274#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
Heiko Schocher381e4e62008-01-11 01:12:06 +0100275
276/*
277 * FLASH timing: Default value of OR0 after reset
278 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200279#define CONFIG_SYS_OR0_PRELIM 0xfe000954
280#define CONFIG_SYS_BR0_PRELIM 0xf0000401
Heiko Schocher381e4e62008-01-11 01:12:06 +0100281
282/*
283 * BR1 and OR1 (SDRAM)
284 *
285 */
286#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */
287#define SDRAM_MAX_SIZE (64 << 20) /* max 64 MB per bank */
288
289/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200290#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
Heiko Schocher381e4e62008-01-11 01:12:06 +0100291
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200292#define CONFIG_SYS_OR1_PRELIM 0xfc000800
293#define CONFIG_SYS_BR1_PRELIM (0x000000C0 | 0x01)
Heiko Schocher381e4e62008-01-11 01:12:06 +0100294
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200295#define CONFIG_SYS_MPTPR 0x0200
Heiko Schocher381e4e62008-01-11 01:12:06 +0100296/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used),
297 1 Write loop Cycle (not used), 1 Timer Loop Cycle */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200298#define CONFIG_SYS_MBMR 0x10964111
299#define CONFIG_SYS_MAR 0x00000088
Heiko Schocher381e4e62008-01-11 01:12:06 +0100300
301/*
302 * 4096 Rows from SDRAM example configuration
303 * 1000 factor s -> ms
304 * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration
305 * 4 Number of refresh cycles per period
306 * 64 Refresh cycle in ms per number of rows
307 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200308#define CONFIG_SYS_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
Heiko Schocher82afabf2008-03-07 08:15:28 +0100309
310/* GPIO/PIGGY on CS3 initialization values
311*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200312#define CONFIG_SYS_PIGGY_BASE (0x30000000)
313#define CONFIG_SYS_OR3_PRELIM (0xfe000d24)
314#define CONFIG_SYS_BR3_PRELIM (0x30000401)
Heiko Schocher381e4e62008-01-11 01:12:06 +0100315
316/*
317 * Internal Definitions
318 *
319 * Boot Flags
320 */
321#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
322#define BOOTFLAG_WARM 0x02 /* Software reboot */
323
324#define CONFIG_SCC3_ENET
325#define CONFIG_ETHPRIME "SCC ETHERNET"
326#define CONFIG_HAS_ETH0
327
328/* pass open firmware flat tree */
329#define CONFIG_OF_LIBFDT 1
330#define CONFIG_OF_BOARD_SETUP 1
331
332#define OF_CPU "PowerPC,866@0"
Heiko Schocher82afabf2008-03-07 08:15:28 +0100333#define OF_SOC "soc@fff00000"
Heiko Schocher381e4e62008-01-11 01:12:06 +0100334#define OF_TBCLK (bd->bi_busfreq / 4)
335#define OF_STDOUT_PATH "/soc/cpm/serial@a80"
336
Heiko Schocher9661bf92008-10-15 09:36:03 +0200337/* enable I2C and select the hardware/software driver */
338#undef CONFIG_HARD_I2C /* I2C with hardware support */
339#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200340#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */
341#define CONFIG_SYS_I2C_SLAVE 0x7F
Heiko Schocher9661bf92008-10-15 09:36:03 +0200342#define I2C_SOFT_DECLARATIONS
343
344/*
345 * Software (bit-bang) I2C driver configuration
346 */
Heiko Schochera21ca952008-10-17 13:52:51 +0200347#define I2C_BASE_DIR ((u16 *)(CONFIG_SYS_PIGGY_BASE + 0x04))
348#define I2C_BASE_PORT ((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x09))
Heiko Schocher9661bf92008-10-15 09:36:03 +0200349
350#define SDA_BIT 0x40
351#define SCL_BIT 0x80
352#define SDA_CONF 0x1000
353#define SCL_CONF 0x2000
354
355#define I2C_ACTIVE do {} while (0)
356#define I2C_TRISTATE do {} while (0)
Heiko Schochera21ca952008-10-17 13:52:51 +0200357#define I2C_READ ((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT)
Heiko Schocher9661bf92008-10-15 09:36:03 +0200358#define I2C_SDA(bit) if(bit) { \
Heiko Schochera21ca952008-10-17 13:52:51 +0200359 clrbits(be16, I2C_BASE_DIR, SDA_CONF); \
Heiko Schochercac9cf72008-10-17 12:15:05 +0200360 } else { \
Heiko Schochera21ca952008-10-17 13:52:51 +0200361 clrbits(8, I2C_BASE_PORT, SDA_BIT); \
362 setbits(be16, I2C_BASE_DIR, SDA_CONF); \
Heiko Schochercac9cf72008-10-17 12:15:05 +0200363 }
Heiko Schocher9661bf92008-10-15 09:36:03 +0200364#define I2C_SCL(bit) if(bit) { \
Heiko Schochera21ca952008-10-17 13:52:51 +0200365 clrbits(be16, I2C_BASE_DIR, SCL_CONF); \
Heiko Schochercac9cf72008-10-17 12:15:05 +0200366 } else { \
Heiko Schochera21ca952008-10-17 13:52:51 +0200367 clrbits(8, I2C_BASE_PORT, SCL_BIT); \
368 setbits(be16, I2C_BASE_DIR, SCL_CONF); \
Heiko Schochercac9cf72008-10-17 12:15:05 +0200369 }
Heiko Schocher9661bf92008-10-15 09:36:03 +0200370#define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */
371
372#define CONFIG_I2C_MULTI_BUS 1
373#define CONFIG_I2C_CMD_TREE 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200374#define CONFIG_SYS_MAX_I2C_BUS 2
375#define CONFIG_SYS_I2C_INIT_BOARD 1
Heiko Schocher67b23a32008-10-15 09:39:47 +0200376#define CONFIG_I2C_MUX 1
Heiko Schocher9661bf92008-10-15 09:36:03 +0200377
Heiko Schocherf2202452008-10-15 09:36:33 +0200378/* EEprom support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200379#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
380#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
381#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
382#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
383#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
Heiko Schocher9661bf92008-10-15 09:36:03 +0200384
Heiko Schocher8f64da72008-10-15 09:41:00 +0200385/* Support the IVM EEprom */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200386#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
387#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
388#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
Heiko Schocher8f64da72008-10-15 09:41:00 +0200389
Heiko Schochere5e4edd2008-10-15 09:38:07 +0200390/* I2C SYSMON (LM75, AD7414 is almost compatible) */
391#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
392#define CONFIG_DTT_SENSORS {0, 2, 4, 6} /* Sensor addresses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200393#define CONFIG_SYS_DTT_MAX_TEMP 70
394#define CONFIG_SYS_DTT_LOW_TEMP -30
395#define CONFIG_SYS_DTT_HYSTERESIS 3
396#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS)
Heiko Schochere5e4edd2008-10-15 09:38:07 +0200397
Heiko Schocher381e4e62008-01-11 01:12:06 +0100398#endif /* __CONFIG_H */