blob: 964e5e9b90205061ebb7147f4b6a814d2b9fe77b [file] [log] [blame]
Mugunthan V Ne8131382016-09-27 13:01:41 +05301/*
Lokesh Vutla7aa1a402016-11-23 13:25:29 +05302 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
Mugunthan V Ne8131382016-09-27 13:01:41 +05303 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra72x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053012#include <dt-bindings/clk/ti-dra7-atl.h>
Mugunthan V Ne8131382016-09-27 13:01:41 +053013
14/ {
15 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
16
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053017 aliases {
18 display0 = &hdmi0;
19 };
20
Mugunthan V Ne8131382016-09-27 13:01:41 +053021 chosen {
22 stdout-path = &uart1;
Mugunthan V Ne8131382016-09-27 13:01:41 +053023 };
24
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053025 evm_12v0: fixedregulator-evm12v0 {
26 /* main supply */
27 compatible = "regulator-fixed";
28 regulator-name = "evm_12v0";
29 regulator-min-microvolt = <12000000>;
30 regulator-max-microvolt = <12000000>;
31 regulator-always-on;
32 regulator-boot-on;
Mugunthan V Ne8131382016-09-27 13:01:41 +053033 };
34
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053035 evm_5v0: fixedregulator-evm5v0 {
36 /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
37 /* Output 1 of LM5140QRWGTQ1 on dra71-evm */
38 compatible = "regulator-fixed";
39 regulator-name = "evm_5v0";
40 regulator-min-microvolt = <5000000>;
41 regulator-max-microvolt = <5000000>;
42 vin-supply = <&evm_12v0>;
43 regulator-always-on;
44 regulator-boot-on;
45 };
46
47 vsys_3v3: fixedregulator-vsys3v3 {
48 /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
49 /* Output 2 of LM5140QRWGTQ1 on dra71-evm */
50 compatible = "regulator-fixed";
51 regulator-name = "vsys_3v3";
52 regulator-min-microvolt = <3300000>;
53 regulator-max-microvolt = <3300000>;
54 vin-supply = <&evm_12v0>;
55 regulator-always-on;
56 regulator-boot-on;
57 };
58
59 evm_3v3_sw: fixedregulator-evm_3v3 {
60 /* TPS22965DSG */
Mugunthan V Ne8131382016-09-27 13:01:41 +053061 compatible = "regulator-fixed";
62 regulator-name = "evm_3v3";
63 regulator-min-microvolt = <3300000>;
64 regulator-max-microvolt = <3300000>;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +053065 vin-supply = <&vsys_3v3>;
66 regulator-always-on;
67 regulator-boot-on;
68 };
69
70 aic_dvdd: fixedregulator-aic_dvdd {
71 /* TPS77018DBVT */
72 compatible = "regulator-fixed";
73 regulator-name = "aic_dvdd";
74 vin-supply = <&evm_3v3_sw>;
75 regulator-min-microvolt = <1800000>;
76 regulator-max-microvolt = <1800000>;
77 };
78
79 evm_3v3_sd: fixedregulator-sd {
80 compatible = "regulator-fixed";
81 regulator-name = "evm_3v3_sd";
82 regulator-min-microvolt = <3300000>;
83 regulator-max-microvolt = <3300000>;
84 vin-supply = <&evm_3v3_sw>;
85 enable-active-high;
86 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
Mugunthan V Ne8131382016-09-27 13:01:41 +053087 };
88
89 extcon_usb1: extcon_usb1 {
90 compatible = "linux,extcon-usb-gpio";
91 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
92 };
93
94 extcon_usb2: extcon_usb2 {
95 compatible = "linux,extcon-usb-gpio";
96 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
97 };
98
99 hdmi0: connector {
100 compatible = "hdmi-connector";
101 label = "hdmi";
102
103 type = "a";
104
105 port {
106 hdmi_connector_in: endpoint {
107 remote-endpoint = <&tpd12s015_out>;
108 };
109 };
110 };
111
112 tpd12s015: encoder {
113 compatible = "ti,tpd12s015";
114
115 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
116 <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
117 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
118
119 ports {
120 #address-cells = <1>;
121 #size-cells = <0>;
122
123 port@0 {
124 reg = <0>;
125
126 tpd12s015_in: endpoint {
127 remote-endpoint = <&hdmi_out>;
128 };
129 };
130
131 port@1 {
132 reg = <1>;
133
134 tpd12s015_out: endpoint {
135 remote-endpoint = <&hdmi_connector_in>;
136 };
137 };
138 };
139 };
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530140
141 sound0: sound0 {
142 compatible = "simple-audio-card";
143 simple-audio-card,name = "DRA7xx-EVM";
144 simple-audio-card,widgets =
145 "Headphone", "Headphone Jack",
146 "Line", "Line Out",
147 "Microphone", "Mic Jack",
148 "Line", "Line In";
149 simple-audio-card,routing =
150 "Headphone Jack", "HPLOUT",
151 "Headphone Jack", "HPROUT",
152 "Line Out", "LLOUT",
153 "Line Out", "RLOUT",
154 "MIC3L", "Mic Jack",
155 "MIC3R", "Mic Jack",
156 "Mic Jack", "Mic Bias",
157 "LINE1L", "Line In",
158 "LINE1R", "Line In";
159 simple-audio-card,format = "dsp_b";
160 simple-audio-card,bitclock-master = <&sound0_master>;
161 simple-audio-card,frame-master = <&sound0_master>;
162 simple-audio-card,bitclock-inversion;
163
164 sound0_master: simple-audio-card,cpu {
165 sound-dai = <&mcasp3>;
166 system-clock-frequency = <5644800>;
167 };
168
169 simple-audio-card,codec {
170 sound-dai = <&tlv320aic3106>;
171 clocks = <&atl_clkin2_ck>;
172 };
173 };
Mugunthan V Ne8131382016-09-27 13:01:41 +0530174};
175
176&dra7_pmx_core {
177 mmc1_pins_default: mmc1_pins_default {
178 pinctrl-single,pins = <
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530179 DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
180 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
181 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
182 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
183 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
184 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
185 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
Mugunthan V Ne8131382016-09-27 13:01:41 +0530186 >;
187 };
188
189 mmc2_pins_default: mmc2_pins_default {
190 pinctrl-single,pins = <
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530191 DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
192 DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
193 DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
194 DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
195 DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
196 DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
197 DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
198 DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
199 DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
200 DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
Mugunthan V Ne8131382016-09-27 13:01:41 +0530201 >;
202 };
203
204 dcan1_pins_default: dcan1_pins_default {
205 pinctrl-single,pins = <
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530206 DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
207 DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
Mugunthan V Ne8131382016-09-27 13:01:41 +0530208 >;
209 };
210
211 dcan1_pins_sleep: dcan1_pins_sleep {
212 pinctrl-single,pins = <
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530213 DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
214 DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
Mugunthan V Ne8131382016-09-27 13:01:41 +0530215 >;
216 };
217};
218
219&i2c1 {
220 status = "okay";
221 clock-frequency = <400000>;
222
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530223 pcf_lcd: gpio@20 {
224 compatible = "nxp,pcf8575";
225 reg = <0x20>;
226 gpio-controller;
227 #gpio-cells = <2>;
228 interrupt-controller;
229 #interrupt-cells = <2>;
230 };
231
Mugunthan V Ne8131382016-09-27 13:01:41 +0530232 pcf_gpio_21: gpio@21 {
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530233 compatible = "ti,pcf8575", "nxp,pcf8575";
Mugunthan V Ne8131382016-09-27 13:01:41 +0530234 reg = <0x21>;
235 lines-initial-states = <0x1408>;
236 gpio-controller;
237 #gpio-cells = <2>;
Mugunthan V Ne8131382016-09-27 13:01:41 +0530238 interrupt-controller;
239 #interrupt-cells = <2>;
240 };
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530241
242 tlv320aic3106: tlv320aic3106@19 {
243 #sound-dai-cells = <0>;
244 compatible = "ti,tlv320aic3106";
245 reg = <0x19>;
246 adc-settle-ms = <40>;
247 ai3x-micbias-vg = <1>; /* 2.0V */
248 status = "okay";
249
250 /* Regulators */
251 AVDD-supply = <&evm_3v3_sw>;
252 IOVDD-supply = <&evm_3v3_sw>;
253 DRVDD-supply = <&evm_3v3_sw>;
254 DVDD-supply = <&aic_dvdd>;
255 };
Mugunthan V Ne8131382016-09-27 13:01:41 +0530256};
257
258&i2c5 {
259 status = "okay";
260 clock-frequency = <400000>;
261
262 pcf_hdmi: pcf8575@26 {
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530263 compatible = "ti,pcf8575", "nxp,pcf8575";
Mugunthan V Ne8131382016-09-27 13:01:41 +0530264 reg = <0x26>;
265 gpio-controller;
266 #gpio-cells = <2>;
267 /*
268 * initial state is used here to keep the mdio interface
269 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
270 * VIN2_S0 driven high otherwise Ethernet stops working
271 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
272 */
273 lines-initial-states = <0x0f2b>;
274
275 p1 {
276 /* vin6_sel_s0: high: VIN6, low: audio */
277 gpio-hog;
278 gpios = <1 GPIO_ACTIVE_HIGH>;
279 output-low;
280 line-name = "vin6_sel_s0";
281 };
282 };
283};
284
285&uart1 {
286 status = "okay";
287 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
288 <&dra7_pmx_core 0x3e0>;
289};
290
291&elm {
292 status = "okay";
293};
294
295&gpmc {
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530296 /*
297 * For the existing IOdelay configuration via U-Boot we don't
298 * support NAND on dra72-evm. Keep it disabled. Enabling it
299 * requires a different configuration by U-Boot.
300 */
301 status = "disabled";
Mugunthan V Ne8131382016-09-27 13:01:41 +0530302 ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
303 nand@0,0 {
304 /* To use NAND, DIP switch SW5 must be set like so:
305 * SW5.1 (NAND_SELn) = ON (LOW)
306 * SW5.9 (GPMC_WPN) = OFF (HIGH)
307 */
308 compatible = "ti,omap2-nand";
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530309 reg = <0 0 4>; /* device IO registers */
Mugunthan V Ne8131382016-09-27 13:01:41 +0530310 interrupt-parent = <&gpmc>;
311 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530312 <1 IRQ_TYPE_NONE>; /* termcount */
313 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530314 ti,nand-xfer-type = "prefetch-dma";
Mugunthan V Ne8131382016-09-27 13:01:41 +0530315 ti,nand-ecc-opt = "bch8";
316 ti,elm-id = <&elm>;
317 nand-bus-width = <16>;
318 gpmc,device-width = <2>;
319 gpmc,sync-clk-ps = <0>;
320 gpmc,cs-on-ns = <0>;
321 gpmc,cs-rd-off-ns = <80>;
322 gpmc,cs-wr-off-ns = <80>;
323 gpmc,adv-on-ns = <0>;
324 gpmc,adv-rd-off-ns = <60>;
325 gpmc,adv-wr-off-ns = <60>;
326 gpmc,we-on-ns = <10>;
327 gpmc,we-off-ns = <50>;
328 gpmc,oe-on-ns = <4>;
329 gpmc,oe-off-ns = <40>;
330 gpmc,access-ns = <40>;
331 gpmc,wr-access-ns = <80>;
332 gpmc,rd-cycle-ns = <80>;
333 gpmc,wr-cycle-ns = <80>;
334 gpmc,bus-turnaround-ns = <0>;
335 gpmc,cycle2cycle-delay-ns = <0>;
336 gpmc,clk-activation-ns = <0>;
Mugunthan V Ne8131382016-09-27 13:01:41 +0530337 gpmc,wr-data-mux-bus-ns = <0>;
338 /* MTD partition table */
339 /* All SPL-* partitions are sized to minimal length
340 * which can be independently programmable. For
341 * NAND flash this is equal to size of erase-block */
342 #address-cells = <1>;
343 #size-cells = <1>;
344 partition@0 {
345 label = "NAND.SPL";
346 reg = <0x00000000 0x000020000>;
347 };
348 partition@1 {
349 label = "NAND.SPL.backup1";
350 reg = <0x00020000 0x00020000>;
351 };
352 partition@2 {
353 label = "NAND.SPL.backup2";
354 reg = <0x00040000 0x00020000>;
355 };
356 partition@3 {
357 label = "NAND.SPL.backup3";
358 reg = <0x00060000 0x00020000>;
359 };
360 partition@4 {
361 label = "NAND.u-boot-spl-os";
362 reg = <0x00080000 0x00040000>;
363 };
364 partition@5 {
365 label = "NAND.u-boot";
366 reg = <0x000c0000 0x00100000>;
367 };
368 partition@6 {
369 label = "NAND.u-boot-env";
370 reg = <0x001c0000 0x00020000>;
371 };
372 partition@7 {
373 label = "NAND.u-boot-env.backup1";
374 reg = <0x001e0000 0x00020000>;
375 };
376 partition@8 {
377 label = "NAND.kernel";
378 reg = <0x00200000 0x00800000>;
379 };
380 partition@9 {
381 label = "NAND.file-system";
382 reg = <0x00a00000 0x0f600000>;
383 };
384 };
385};
386
Mugunthan V Ne8131382016-09-27 13:01:41 +0530387&omap_dwc3_1 {
388 extcon = <&extcon_usb1>;
389};
390
391&omap_dwc3_2 {
392 extcon = <&extcon_usb2>;
393};
394
395&usb1 {
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530396 dr_mode = "otg";
397 extcon = <&extcon_usb1>;
Mugunthan V Ne8131382016-09-27 13:01:41 +0530398};
399
400&usb2 {
401 dr_mode = "host";
402};
403
404&mmc1 {
405 status = "okay";
406 pinctrl-names = "default";
407 pinctrl-0 = <&mmc1_pins_default>;
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530408 vmmc-supply = <&evm_3v3_sd>;
Mugunthan V Ne8131382016-09-27 13:01:41 +0530409 bus-width = <4>;
410 /*
411 * SDCD signal is not being used here - using the fact that GPIO mode
412 * is a viable alternative
413 */
414 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
415 max-frequency = <192000000>;
416};
417
418&mmc2 {
419 /* SW5-3 in ON position */
420 status = "okay";
421 pinctrl-names = "default";
422 pinctrl-0 = <&mmc2_pins_default>;
Mugunthan V Ne8131382016-09-27 13:01:41 +0530423 bus-width = <8>;
424 ti,non-removable;
425 max-frequency = <192000000>;
426};
427
428&mac {
429 status = "okay";
430};
431
432&dcan1 {
Roger Quadros72f78c62021-08-24 14:07:27 +0300433 status = "okay";
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530434 pinctrl-names = "default", "sleep", "active";
435 pinctrl-0 = <&dcan1_pins_sleep>;
436 pinctrl-1 = <&dcan1_pins_sleep>;
437 pinctrl-2 = <&dcan1_pins_default>;
Mugunthan V Ne8131382016-09-27 13:01:41 +0530438};
439
440&qspi {
441 status = "okay";
442
443 spi-max-frequency = <76800000>;
444 m25p80@0 {
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530445 compatible = "s25fl256s1";
Vignesh R84295f22016-11-05 16:05:15 +0530446 spi-max-frequency = <76800000>;
Mugunthan V Ne8131382016-09-27 13:01:41 +0530447 reg = <0>;
448 spi-tx-bus-width = <1>;
449 spi-rx-bus-width = <4>;
450 #address-cells = <1>;
451 #size-cells = <1>;
452
453 /* MTD partition table.
454 * The ROM checks the first four physical blocks
455 * for a valid file to boot and the flash here is
456 * 64KiB block size.
457 */
458 partition@0 {
459 label = "QSPI.SPL";
460 reg = <0x00000000 0x000010000>;
461 };
462 partition@1 {
463 label = "QSPI.SPL.backup1";
464 reg = <0x00010000 0x00010000>;
465 };
466 partition@2 {
467 label = "QSPI.SPL.backup2";
468 reg = <0x00020000 0x00010000>;
469 };
470 partition@3 {
471 label = "QSPI.SPL.backup3";
472 reg = <0x00030000 0x00010000>;
473 };
474 partition@4 {
475 label = "QSPI.u-boot";
476 reg = <0x00040000 0x00100000>;
477 };
478 partition@5 {
479 label = "QSPI.u-boot-spl-os";
480 reg = <0x00140000 0x00080000>;
481 };
482 partition@6 {
483 label = "QSPI.u-boot-env";
484 reg = <0x001c0000 0x00010000>;
485 };
486 partition@7 {
487 label = "QSPI.u-boot-env.backup1";
488 reg = <0x001d0000 0x0010000>;
489 };
490 partition@8 {
491 label = "QSPI.kernel";
492 reg = <0x001e0000 0x0800000>;
493 };
494 partition@9 {
495 label = "QSPI.file-system";
496 reg = <0x009e0000 0x01620000>;
497 };
498 };
499};
500
501&dss {
Roger Quadros72f78c62021-08-24 14:07:27 +0300502 status = "okay";
Mugunthan V Ne8131382016-09-27 13:01:41 +0530503};
504
505&hdmi {
Roger Quadros72f78c62021-08-24 14:07:27 +0300506 status = "okay";
Mugunthan V Ne8131382016-09-27 13:01:41 +0530507
508 port {
509 hdmi_out: endpoint {
510 remote-endpoint = <&tpd12s015_in>;
511 };
512 };
513};
Lokesh Vutla7aa1a402016-11-23 13:25:29 +0530514
515&atl {
516 assigned-clocks = <&abe_dpll_sys_clk_mux>,
517 <&atl_gfclk_mux>,
518 <&dpll_abe_ck>,
519 <&dpll_abe_m2x2_ck>,
520 <&atl_clkin2_ck>;
521 assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
522 assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
523
524 status = "okay";
525
526 atl2 {
527 bws = <DRA7_ATL_WS_MCASP2_FSX>;
528 aws = <DRA7_ATL_WS_MCASP3_FSX>;
529 };
530};
531
532&mcasp3 {
533 #sound-dai-cells = <0>;
534
535 assigned-clocks = <&mcasp3_ahclkx_mux>;
536 assigned-clock-parents = <&atl_clkin2_ck>;
537
538 status = "okay";
539
540 op-mode = <0>; /* MCASP_IIS_MODE */
541 tdm-slots = <2>;
542 /* 4 serializer */
543 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
544 1 2 0 0
545 >;
546 tx-num-evt = <32>;
547 rx-num-evt = <32>;
548};
549
550&mailbox5 {
551 status = "okay";
552 mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
553 status = "okay";
554 };
555 mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
556 status = "okay";
557 };
558};
559
560&mailbox6 {
561 status = "okay";
562 mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
563 status = "okay";
564 };
565};
Lokesh Vutla4ddaa6c2017-08-21 12:50:59 +0530566
567&pcie1_rc {
568 status = "okay";
569};