blob: 1898a8235618d4e5ef2fa90f5598e7f10056c343 [file] [log] [blame]
TENART Antoine425faf72013-07-02 12:06:00 +02001/*
2 * ti816x_evm.h
3 *
4 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
5 * Antoine Tenart, <atenart@adeneo-embedded.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#ifndef __CONFIG_TI816X_EVM_H
11#define __CONFIG_TI816X_EVM_H
12
Tom Rini1d7f6ad2017-05-16 14:46:39 -040013#include <configs/ti_armv7_omap.h>
TENART Antoine425faf72013-07-02 12:06:00 +020014#include <asm/arch/omap.h>
15
16#define CONFIG_ENV_SIZE 0x2000
TENART Antoine425faf72013-07-02 12:06:00 +020017#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
18
TENART Antoine425faf72013-07-02 12:06:00 +020019#define CONFIG_EXTRA_ENV_SETTINGS \
Tom Rini1d7f6ad2017-05-16 14:46:39 -040020 DEFAULT_LINUX_BOOT_ENV \
21 "mtdids=" MTDIDS_DEFAULT "\0" \
22 "mtdparts=" MTDPARTS_DEFAULT "\0" \
TENART Antoine425faf72013-07-02 12:06:00 +020023
24#define CONFIG_BOOTCOMMAND \
25 "mmc rescan;" \
26 "fatload mmc 0 ${loadaddr} uImage;" \
27 "bootm ${loadaddr}" \
28
TENART Antoine425faf72013-07-02 12:06:00 +020029/* Clock Defines */
30#define V_OSCK 24000000 /* Clock output from T2 */
31#define V_SCLK (V_OSCK >> 1)
32
Simon Glass4848d892017-04-26 22:27:50 -060033#define CONFIG_CMD_ASKENV
TENART Antoine425faf72013-07-02 12:06:00 +020034
TENART Antoine425faf72013-07-02 12:06:00 +020035#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */
Tom Rini1d7f6ad2017-05-16 14:46:39 -040036#define CONFIG_SYS_SDRAM_BASE 0x80000000
TENART Antoine425faf72013-07-02 12:06:00 +020037
38/**
39 * Platform/Board specific defs
40 */
41#define CONFIG_SYS_CLK_FREQ 27000000
42#define CONFIG_SYS_TIMERBASE 0x4802E000
43#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
44
TENART Antoine425faf72013-07-02 12:06:00 +020045/*
46 * NS16550 Configuration
47 */
TENART Antoine425faf72013-07-02 12:06:00 +020048#define CONFIG_SYS_NS16550_SERIAL
49#define CONFIG_SYS_NS16550_REG_SIZE (-4)
50#define CONFIG_SYS_NS16550_CLK (48000000)
51#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
52
TENART Antoine425faf72013-07-02 12:06:00 +020053/* allow overwriting serial config and ethaddr */
54#define CONFIG_ENV_OVERWRITE
55
56#define CONFIG_SERIAL1
57#define CONFIG_SERIAL2
58#define CONFIG_SERIAL3
59#define CONFIG_CONS_INDEX 1
TENART Antoine425faf72013-07-02 12:06:00 +020060
Tom Rini77e99272017-05-16 14:46:37 -040061/*
62 * GPMC NAND block. We support 1 device and the physical address to
63 * access CS0 at is 0x8000000.
64 */
65#define CONFIG_SYS_NAND_BASE 0x8000000
66#define CONFIG_SYS_MAX_NAND_DEVICE 1
67
68/* NAND: SPL related configs */
Tom Rini77e99272017-05-16 14:46:37 -040069#define CONFIG_SPL_NAND_AM33XX_BCH
Tom Rini77e99272017-05-16 14:46:37 -040070
71/* NAND: device related configs */
72#define CONFIG_SYS_NAND_5_ADDR_CYCLE
73#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
74#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
75 CONFIG_SYS_NAND_PAGE_SIZE)
76#define CONFIG_SYS_NAND_PAGE_SIZE 2048
77#define CONFIG_SYS_NAND_OOBSIZE 64
78#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
79/* NAND: driver related configs */
Tom Rini77e99272017-05-16 14:46:37 -040080#define CONFIG_NAND_OMAP_GPMC_PREFETCH
81#define CONFIG_NAND_OMAP_ELM
82#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
83#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
84 10, 11, 12, 13, 14, 15, 16, 17, \
85 18, 19, 20, 21, 22, 23, 24, 25, \
86 26, 27, 28, 29, 30, 31, 32, 33, \
87 34, 35, 36, 37, 38, 39, 40, 41, \
88 42, 43, 44, 45, 46, 47, 48, 49, \
89 50, 51, 52, 53, 54, 55, 56, 57, }
90
91#define CONFIG_SYS_NAND_ECCSIZE 512
92#define CONFIG_SYS_NAND_ECCBYTES 14
93#define CONFIG_SYS_NAND_ONFI_DETECTION
94#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
95#define MTDIDS_DEFAULT "nand0=nand.0"
96#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
97 "128k(NAND.SPL)," \
98 "128k(NAND.SPL.backup1)," \
99 "128k(NAND.SPL.backup2)," \
100 "128k(NAND.SPL.backup3)," \
101 "256k(NAND.u-boot-spl-os)," \
102 "1m(NAND.u-boot)," \
103 "128k(NAND.u-boot-env)," \
104 "128k(NAND.u-boot-env.backup1)," \
105 "8m(NAND.kernel)," \
106 "-(NAND.file-system)"
107#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
Tom Rini77e99272017-05-16 14:46:37 -0400108#define CONFIG_ENV_OFFSET 0x001c0000
109#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
110#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
TENART Antoine425faf72013-07-02 12:06:00 +0200111
112/* SPL */
113/* Defines for SPL */
Tom Rini77e99272017-05-16 14:46:37 -0400114#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
TENART Antoine425faf72013-07-02 12:06:00 +0200115#define CONFIG_SPL_TEXT_BASE 0x40400000
Tom Rinifa2f81b2016-08-26 13:30:43 -0400116#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
117 CONFIG_SPL_TEXT_BASE)
TENART Antoine425faf72013-07-02 12:06:00 +0200118
TENART Antoine425faf72013-07-02 12:06:00 +0200119#define CONFIG_SYS_TEXT_BASE 0x80800000
TENART Antoine425faf72013-07-02 12:06:00 +0200120
Tom Rinide820362017-05-10 12:01:02 -0400121#define CONFIG_DRIVER_TI_EMAC
122#define CONFIG_MII
123#define CONFIG_BOOTP_DNS
124#define CONFIG_BOOTP_DNS2
125#define CONFIG_BOOTP_SEND_HOSTNAME
126#define CONFIG_BOOTP_GATEWAY
127#define CONFIG_BOOTP_SUBNETMASK
128#define CONFIG_NET_RETRY_COUNT 10
129
TENART Antoine425faf72013-07-02 12:06:00 +0200130/* Since SPL did pll and ddr initialization for us,
131 * we don't need to do it twice.
132 */
133#ifndef CONFIG_SPL_BUILD
134#define CONFIG_SKIP_LOWLEVEL_INIT
135#endif
136
Tom Rini1d7f6ad2017-05-16 14:46:39 -0400137/*
138 * Disable MMC DM for SPL build and can be re-enabled after adding
139 * DM support in SPL
140 */
141#ifdef CONFIG_SPL_BUILD
142#undef CONFIG_DM_MMC
143#undef CONFIG_TIMER
Tom Rini1d7f6ad2017-05-16 14:46:39 -0400144#endif
TENART Antoine425faf72013-07-02 12:06:00 +0200145#endif