rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2015 |
Kamil Lulko | 6656241 | 2015-12-01 09:08:19 +0100 | [diff] [blame] | 3 | * Kamil Lulko, <kamil.lulko@gmail.com> |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #ifndef __CONFIG_H |
| 9 | #define __CONFIG_H |
| 10 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 11 | #define CONFIG_STM32F4DISCOVERY |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 12 | |
Antonio Borneo | 089fddf | 2015-07-19 22:19:46 +0800 | [diff] [blame] | 13 | #define CONFIG_MISC_INIT_R |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 14 | |
| 15 | #define CONFIG_SYS_FLASH_BASE 0x08000000 |
| 16 | |
| 17 | #define CONFIG_SYS_INIT_SP_ADDR 0x10010000 |
| 18 | #define CONFIG_SYS_TEXT_BASE 0x08000000 |
| 19 | |
| 20 | #define CONFIG_SYS_ICACHE_OFF |
| 21 | #define CONFIG_SYS_DCACHE_OFF |
| 22 | |
| 23 | /* |
| 24 | * Configuration of the external SDRAM memory |
| 25 | */ |
| 26 | #define CONFIG_NR_DRAM_BANKS 1 |
| 27 | #define CONFIG_SYS_RAM_SIZE (8 << 20) |
| 28 | #define CONFIG_SYS_RAM_CS 1 |
| 29 | #define CONFIG_SYS_RAM_FREQ_DIV 2 |
| 30 | #define CONFIG_SYS_RAM_BASE 0xD0000000 |
| 31 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE |
| 32 | #define CONFIG_SYS_LOAD_ADDR 0xD0400000 |
| 33 | #define CONFIG_LOADADDR 0xD0400000 |
| 34 | |
| 35 | #define CONFIG_SYS_MAX_FLASH_SECT 12 |
| 36 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 |
| 37 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 38 | #define CONFIG_ENV_OFFSET (256 << 10) |
| 39 | #define CONFIG_ENV_SECT_SIZE (128 << 10) |
| 40 | #define CONFIG_ENV_SIZE (8 << 10) |
| 41 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 42 | #define CONFIG_RED_LED 110 |
| 43 | #define CONFIG_GREEN_LED 109 |
| 44 | |
| 45 | #define CONFIG_STM32_GPIO |
Vikas Manocha | 9ecb0c4 | 2016-03-09 15:18:13 -0800 | [diff] [blame] | 46 | #define CONFIG_STM32_FLASH |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 47 | #define CONFIG_STM32_SERIAL |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 48 | |
| 49 | #define CONFIG_STM32_HSE_HZ 8000000 |
| 50 | |
Antonio Borneo | f9fa4a2 | 2015-07-19 22:19:48 +0800 | [diff] [blame] | 51 | #define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */ |
| 52 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 53 | #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ |
| 54 | |
| 55 | #define CONFIG_CMDLINE_TAG |
| 56 | #define CONFIG_SETUP_MEMORY_TAGS |
| 57 | #define CONFIG_INITRD_TAG |
| 58 | #define CONFIG_REVISION_TAG |
| 59 | |
| 60 | #define CONFIG_SYS_CBSIZE 1024 |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 61 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 62 | #define CONFIG_SYS_MALLOC_LEN (2 << 20) |
| 63 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 64 | #define CONFIG_BOOTCOMMAND \ |
| 65 | "run bootcmd_romfs" |
| 66 | |
| 67 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 68 | "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \ |
| 69 | "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ |
| 70 | "bootm 0x08044000 - 0x08042000\0" |
| 71 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 72 | /* |
| 73 | * Command line configuration. |
| 74 | */ |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 75 | #define CONFIG_SYS_LONGHELP |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 76 | #define CONFIG_AUTO_COMPLETE |
| 77 | #define CONFIG_CMDLINE_EDITING |
| 78 | |
rev13@wp.pl | ed09a55 | 2015-03-01 12:44:42 +0100 | [diff] [blame] | 79 | #endif /* __CONFIG_H */ |