blob: c3e3fae44f05cc518f85752db3db71a2d5e6d1f1 [file] [log] [blame]
Mingkai Hu4f1d1b72011-07-07 12:29:15 +08001/*
ramneek mehresh3d7506f2012-04-18 19:39:53 +00002 * Copyright 2011-2012 Freescale Semiconductor, Inc.
Mingkai Hu4f1d1b72011-07-07 12:29:15 +08003 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Mingkai Hu4f1d1b72011-07-07 12:29:15 +08005 */
6
7/*
8 * P2041 RDB board configuration file
Scott Wood3e978f52012-08-14 10:14:51 +00009 * Also supports P2040 RDB
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080010 */
11#ifndef __CONFIG_H
12#define __CONFIG_H
13
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080014#ifdef CONFIG_RAMBOOT_PBL
15#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
16#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
Masahiro Yamadae4536f82014-03-11 11:05:16 +090017#define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
18#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080019#endif
20
Liu Gang461632b2012-08-09 05:10:03 +000021#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
Liu Gangff65f122012-08-09 05:09:59 +000022/* Set 1M boot space */
Liu Gang461632b2012-08-09 05:10:03 +000023#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
24#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
25 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
Liu Gangff65f122012-08-09 05:09:59 +000026#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
Liu Gangff65f122012-08-09 05:09:59 +000027#endif
28
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080029/* High Level Configuration Options */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080030#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080031#define CONFIG_MP /* support multiple processors */
32
33#ifndef CONFIG_SYS_TEXT_BASE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053034#define CONFIG_SYS_TEXT_BASE 0xeff40000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080035#endif
36
37#ifndef CONFIG_RESET_VECTOR_ADDRESS
38#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
39#endif
40
41#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
York Sun51370d52016-12-28 08:43:45 -080042#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
Robert P. J. Dayb38eaec2016-05-03 19:52:49 -040043#define CONFIG_PCIE1 /* PCIE controller 1 */
44#define CONFIG_PCIE2 /* PCIE controller 2 */
45#define CONFIG_PCIE3 /* PCIE controller 3 */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080046#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
47#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
48
49#define CONFIG_SYS_SRIO
50#define CONFIG_SRIO1 /* SRIO port 1 */
51#define CONFIG_SRIO2 /* SRIO port 2 */
Liu Gangc8b28152013-05-07 16:30:46 +080052#define CONFIG_SRIO_PCIE_BOOT_MASTER
Kumar Gala4d28db82011-10-14 13:28:52 -050053#define CONFIG_SYS_DPAA_RMAN /* RMan */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080054
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080055#define CONFIG_ENV_OVERWRITE
56
Masahiro Yamadae856bdc2017-02-11 22:43:54 +090057#ifndef CONFIG_MTD_NOR_FLASH
Liu Gang461632b2012-08-09 05:10:03 +000058#if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080059#define CONFIG_ENV_IS_NOWHERE
Shaohui Xie0f57f6a2012-06-28 23:35:34 +000060#endif
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080061#else
62#define CONFIG_FLASH_CFI_DRIVER
63#define CONFIG_SYS_FLASH_CFI
Shaohui Xie0f57f6a2012-06-28 23:35:34 +000064#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080065#endif
66
67#if defined(CONFIG_SPIFLASH)
68 #define CONFIG_SYS_EXTRA_ENV_RELOC
69 #define CONFIG_ENV_IS_IN_SPI_FLASH
70 #define CONFIG_ENV_SPI_BUS 0
71 #define CONFIG_ENV_SPI_CS 0
72 #define CONFIG_ENV_SPI_MAX_HZ 10000000
73 #define CONFIG_ENV_SPI_MODE 0
74 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */
75 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
76 #define CONFIG_ENV_SECT_SIZE 0x10000
77#elif defined(CONFIG_SDCARD)
78 #define CONFIG_SYS_EXTRA_ENV_RELOC
79 #define CONFIG_ENV_IS_IN_MMC
Fabio Estevam4394d0c2012-01-11 09:20:50 +000080 #define CONFIG_FSL_FIXED_MMC_LOCATION
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080081 #define CONFIG_SYS_MMC_ENV_DEV 0
82 #define CONFIG_ENV_SIZE 0x2000
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053083 #define CONFIG_ENV_OFFSET (512 * 1658)
Shaohui Xie15c8c6c2012-02-28 23:28:40 +000084#elif defined(CONFIG_NAND)
85#define CONFIG_SYS_EXTRA_ENV_RELOC
86#define CONFIG_ENV_IS_IN_NAND
87#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +053088#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
Liu Gang461632b2012-08-09 05:10:03 +000089#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
Liu Gangff65f122012-08-09 05:09:59 +000090#define CONFIG_ENV_IS_IN_REMOTE
91#define CONFIG_ENV_ADDR 0xffe20000
92#define CONFIG_ENV_SIZE 0x2000
Shaohui Xie0f57f6a2012-06-28 23:35:34 +000093#elif defined(CONFIG_ENV_IS_NOWHERE)
Liu Gangff65f122012-08-09 05:09:59 +000094#define CONFIG_ENV_SIZE 0x2000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +080095#else
96 #define CONFIG_ENV_IS_IN_FLASH
97 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
98 - CONFIG_ENV_SECT_SIZE)
99 #define CONFIG_ENV_SIZE 0x2000
100 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
101#endif
102
Shaohui Xie44d50f02011-09-13 17:55:11 +0800103#ifndef __ASSEMBLY__
104unsigned long get_board_sys_clk(unsigned long dummy);
105#endif
106#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800107
108/*
109 * These can be toggled for performance analysis, otherwise use default.
110 */
111#define CONFIG_SYS_CACHE_STASHING
Mingkai Hucd420e02011-07-21 17:03:54 -0500112#define CONFIG_BACKSIDE_L2_CACHE
113#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800114#define CONFIG_BTB /* toggle branch predition */
115
116#define CONFIG_ENABLE_36BIT_PHYS
117
118#ifdef CONFIG_PHYS_64BIT
119#define CONFIG_ADDR_MAP
120#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
121#endif
122
123#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
124#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
125#define CONFIG_SYS_MEMTEST_END 0x00400000
126#define CONFIG_SYS_ALT_MEMTEST
127#define CONFIG_PANIC_HANG /* do not reset board on panic */
128
129/*
130 * Config the L3 Cache as L3 SRAM
131 */
132#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
133#ifdef CONFIG_PHYS_64BIT
134#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \
135 CONFIG_RAMBOOT_TEXT_BASE)
136#else
137#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
138#endif
139#define CONFIG_SYS_L3_SIZE (1024 << 10)
140#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
141
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800142#ifdef CONFIG_PHYS_64BIT
143#define CONFIG_SYS_DCSRBAR 0xf0000000
144#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
145#endif
146
147/* EEPROM */
148#define CONFIG_ID_EEPROM
149#define CONFIG_SYS_I2C_EEPROM_NXID
150#define CONFIG_SYS_EEPROM_BUS_NUM 0
151#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
152#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
153
154/*
155 * DDR Setup
156 */
157#define CONFIG_VERY_BIG_RAM
158#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
159#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
160
161#define CONFIG_DIMM_SLOTS_PER_CTLR 1
162#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
163
164#define CONFIG_DDR_SPD
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800165
166#define CONFIG_SYS_SPD_BUS_NUM 0
167#define SPD_EEPROM_ADDRESS 0x52
168#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
169
170/*
171 * Local Bus Definitions
172 */
173
174/* Set the local bus clock 1/8 of platform clock */
175#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
176
York Sunca1b0b82012-10-26 16:40:15 +0000177/*
178 * This board doesn't have a promjet connector.
179 * However, it uses commone corenet board LAW and TLB.
180 * It is necessary to use the same start address with proper offset.
181 */
182#define CONFIG_SYS_FLASH_BASE 0xe0000000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800183#ifdef CONFIG_PHYS_64BIT
York Sunca1b0b82012-10-26 16:40:15 +0000184#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800185#else
186#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
187#endif
188
Shaohui Xiec9b2fea2012-02-28 23:28:07 +0000189#define CONFIG_SYS_FLASH_BR_PRELIM \
York Sunca1b0b82012-10-26 16:40:15 +0000190 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
191 BR_PS_16 | BR_V)
Shaohui Xiec9b2fea2012-02-28 23:28:07 +0000192#define CONFIG_SYS_FLASH_OR_PRELIM \
193 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
194 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800195
196#define CONFIG_FSL_CPLD
197#define CPLD_BASE 0xffdf0000 /* CPLD registers */
198#ifdef CONFIG_PHYS_64BIT
199#define CPLD_BASE_PHYS 0xfffdf0000ull
200#else
201#define CPLD_BASE_PHYS CPLD_BASE
202#endif
203
204#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
205#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
206
207#define PIXIS_LBMAP_SWITCH 7
208#define PIXIS_LBMAP_MASK 0xf0
209#define PIXIS_LBMAP_SHIFT 4
210#define PIXIS_LBMAP_ALTBANK 0x40
211
212#define CONFIG_SYS_FLASH_QUIET_TEST
213#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
214
215#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
216#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
217#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */
218#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */
219
220#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
221
222#if defined(CONFIG_RAMBOOT_PBL)
223#define CONFIG_SYS_RAMBOOT
224#endif
225
Shaohui Xiec9b2fea2012-02-28 23:28:07 +0000226#define CONFIG_NAND_FSL_ELBC
227/* Nand Flash */
228#ifdef CONFIG_NAND_FSL_ELBC
229#define CONFIG_SYS_NAND_BASE 0xffa00000
230#ifdef CONFIG_PHYS_64BIT
231#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
232#else
233#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
234#endif
235
236#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
237#define CONFIG_SYS_MAX_NAND_DEVICE 1
Shaohui Xiec9b2fea2012-02-28 23:28:07 +0000238#define CONFIG_CMD_NAND
239#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
240
241/* NAND flash config */
242#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
243 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
244 | BR_PS_8 /* Port Size = 8 bit */ \
245 | BR_MS_FCM /* MSEL = FCM */ \
246 | BR_V) /* valid */
247#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
248 | OR_FCM_PGS /* Large Page*/ \
249 | OR_FCM_CSCT \
250 | OR_FCM_CST \
251 | OR_FCM_CHT \
252 | OR_FCM_SCY_1 \
253 | OR_FCM_TRLX \
254 | OR_FCM_EHTR)
255
256#ifdef CONFIG_NAND
257#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
258#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
259#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
260#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
261#else
262#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
263#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
264#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
265#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
266#endif
267#else
268#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
269#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
270#endif /* CONFIG_NAND_FSL_ELBC */
271
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800272#define CONFIG_SYS_FLASH_EMPTY_INFO
273#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
York Sunca1b0b82012-10-26 16:40:15 +0000274#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800275
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800276#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
277#define CONFIG_MISC_INIT_R
278
279#define CONFIG_HWCONFIG
280
281/* define to use L1 as initial stack */
282#define CONFIG_L1_INIT_RAM
283#define CONFIG_SYS_INIT_RAM_LOCK
284#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
285#ifdef CONFIG_PHYS_64BIT
286#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
287#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
288/* The assembler doesn't like typecast */
289#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
290 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
291 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
292#else
293#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
294#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
295#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
296#endif
297#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
298
299#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
300 GENERATED_GBL_DATA_SIZE)
301#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
302
Prabhakar Kushwaha9307cba2014-03-31 15:31:48 +0530303#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800304#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
305
306/* Serial Port - controlled on board with jumper J8
307 * open - index 2
308 * shorted - index 1
309 */
310#define CONFIG_CONS_INDEX 1
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800311#define CONFIG_SYS_NS16550_SERIAL
312#define CONFIG_SYS_NS16550_REG_SIZE 1
313#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
314
315#define CONFIG_SYS_BAUDRATE_TABLE \
316 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
317
318#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
319#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
320#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
321#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
322
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800323/* I2C */
Heiko Schocher00f792e2012-10-24 13:48:22 +0200324#define CONFIG_SYS_I2C
325#define CONFIG_SYS_I2C_FSL
326#define CONFIG_SYS_FSL_I2C_SPEED 400000
327#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
Shaohui Xie2bd1aab2013-09-10 16:15:07 +0800328#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
Heiko Schocher00f792e2012-10-24 13:48:22 +0200329#define CONFIG_SYS_FSL_I2C2_SPEED 400000
330#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
Shaohui Xie2bd1aab2013-09-10 16:15:07 +0800331#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800332
333/*
334 * RapidIO
335 */
336#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000
337#ifdef CONFIG_PHYS_64BIT
338#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
339#else
340#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000
341#endif
342#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
343
344#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000
345#ifdef CONFIG_PHYS_64BIT
346#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
347#else
348#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000
349#endif
350#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
351
352/*
Liu Gangff65f122012-08-09 05:09:59 +0000353 * for slave u-boot IMAGE instored in master memory space,
354 * PHYS must be aligned based on the SIZE
355 */
Liu Gange4911812014-05-15 14:30:34 +0800356#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
357#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
358#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
359#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
Liu Gangff65f122012-08-09 05:09:59 +0000360/*
361 * for slave UCODE and ENV instored in master memory space,
362 * PHYS must be aligned based on the SIZE
363 */
Liu Gange4911812014-05-15 14:30:34 +0800364#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
Liu Gangb5f7c872012-08-09 05:10:02 +0000365#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
366#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
Liu Gangff65f122012-08-09 05:09:59 +0000367
368/* slave core release by master*/
Liu Gangb5f7c872012-08-09 05:10:02 +0000369#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
370#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
Liu Gangff65f122012-08-09 05:09:59 +0000371
372/*
Liu Gang461632b2012-08-09 05:10:03 +0000373 * SRIO_PCIE_BOOT - SLAVE
Liu Gangff65f122012-08-09 05:09:59 +0000374 */
Liu Gang461632b2012-08-09 05:10:03 +0000375#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
376#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
377#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
378 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
Liu Gangff65f122012-08-09 05:09:59 +0000379#endif
380
381/*
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800382 * eSPI - Enhanced SPI
383 */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800384#define CONFIG_SF_DEFAULT_SPEED 10000000
385#define CONFIG_SF_DEFAULT_MODE 0
386
387/*
388 * General PCI
389 * Memory space is mapped 1-1, but I/O space must start from 0.
390 */
391
392/* controller 1, direct to uli, tgtid 3, Base address 20000 */
393#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
394#ifdef CONFIG_PHYS_64BIT
395#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
396#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
397#else
398#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
399#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
400#endif
401#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
402#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
403#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
404#ifdef CONFIG_PHYS_64BIT
405#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
406#else
407#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
408#endif
409#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
410
411/* controller 2, Slot 2, tgtid 2, Base address 201000 */
412#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
413#ifdef CONFIG_PHYS_64BIT
414#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
415#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
416#else
417#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
418#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
419#endif
420#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
421#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
422#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
423#ifdef CONFIG_PHYS_64BIT
424#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
425#else
426#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
427#endif
428#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
429
430/* controller 3, Slot 1, tgtid 1, Base address 202000 */
431#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
432#ifdef CONFIG_PHYS_64BIT
433#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
434#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
435#else
436#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
437#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
438#endif
439#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
440#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
441#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
442#ifdef CONFIG_PHYS_64BIT
443#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
444#else
445#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
446#endif
447#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
448
449/* Qman/Bman */
450#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
451#define CONFIG_SYS_BMAN_NUM_PORTALS 10
452#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
453#ifdef CONFIG_PHYS_64BIT
454#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
455#else
456#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
457#endif
458#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
Jeffrey Ladouceur3fa66db2014-12-08 14:54:01 -0500459#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
460#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
461#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
462#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
463#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
464 CONFIG_SYS_BMAN_CENA_SIZE)
465#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
466#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800467#define CONFIG_SYS_QMAN_NUM_PORTALS 10
468#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
469#ifdef CONFIG_PHYS_64BIT
470#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
471#else
472#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
473#endif
474#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
Jeffrey Ladouceur3fa66db2014-12-08 14:54:01 -0500475#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
476#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
477#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
478#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
479#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
480 CONFIG_SYS_QMAN_CENA_SIZE)
481#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
482#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800483
484#define CONFIG_SYS_DPAA_FMAN
485#define CONFIG_SYS_DPAA_PME
486/* Default address of microcode for the Linux Fman driver */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800487#if defined(CONFIG_SPIFLASH)
488/*
489 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
490 * env, so we got 0x110000.
491 */
Timur Tabif2717b42011-11-22 09:21:25 -0600492#define CONFIG_SYS_QE_FW_IN_SPIFLASH
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800493#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800494#elif defined(CONFIG_SDCARD)
495/*
496 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
Prabhakar Kushwahae222b1f2014-01-14 11:34:26 +0530497 * about 825KB (1650 blocks), Env is stored after the image, and the env size is
498 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800499 */
Timur Tabif2717b42011-11-22 09:21:25 -0600500#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800501#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800502#elif defined(CONFIG_NAND)
Timur Tabif2717b42011-11-22 09:21:25 -0600503#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800504#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
Liu Gang461632b2012-08-09 05:10:03 +0000505#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
Liu Gangff65f122012-08-09 05:09:59 +0000506/*
507 * Slave has no ucode locally, it can fetch this from remote. When implementing
508 * in two corenet boards, slave's ucode could be stored in master's memory
509 * space, the address can be mapped from slave TLB->slave LAW->
Liu Gang461632b2012-08-09 05:10:03 +0000510 * slave SRIO or PCIE outbound window->master inbound window->
511 * master LAW->the ucode address in master's memory space.
Liu Gangff65f122012-08-09 05:09:59 +0000512 */
513#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800514#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800515#else
Timur Tabif2717b42011-11-22 09:21:25 -0600516#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
Zhao Qiangdcf1d772014-03-21 16:21:44 +0800517#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800518#endif
Timur Tabif2717b42011-11-22 09:21:25 -0600519#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
520#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800521
522#ifdef CONFIG_SYS_DPAA_FMAN
523#define CONFIG_FMAN_ENET
Mingkai Hu0787ecc2011-07-19 16:20:13 +0800524#define CONFIG_PHYLIB_10G
525#define CONFIG_PHY_VITESSE
526#define CONFIG_PHY_TERANETICS
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800527#endif
528
529#ifdef CONFIG_PCI
Gabor Juhos842033e2013-05-30 07:06:12 +0000530#define CONFIG_PCI_INDIRECT_BRIDGE
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800531
532#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800533#endif /* CONFIG_PCI */
534
Mingkai Huaa7f281c2011-07-27 09:55:51 +0800535/* SATA */
Zang Roy-R619119760b272012-11-26 00:05:38 +0000536#define CONFIG_FSL_SATA_V2
537
538#ifdef CONFIG_FSL_SATA_V2
Mingkai Huaa7f281c2011-07-27 09:55:51 +0800539#define CONFIG_FSL_SATA
Timur Tabi3e0529f2011-11-21 17:10:22 -0600540#define CONFIG_LIBATA
Mingkai Huaa7f281c2011-07-27 09:55:51 +0800541
542#define CONFIG_SYS_SATA_MAX_DEVICE 2
543#define CONFIG_SATA1
544#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
545#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
546#define CONFIG_SATA2
547#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
548#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
549
550#define CONFIG_LBA48
551#define CONFIG_CMD_SATA
Mingkai Huaa7f281c2011-07-27 09:55:51 +0800552#endif
553
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800554#ifdef CONFIG_FMAN_ENET
555#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2
556#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3
557#define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4
558#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1
559#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0
560
561#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
562#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
563#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e
564#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f
565
Mingkai Hu0787ecc2011-07-19 16:20:13 +0800566#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0
567
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800568#define CONFIG_SYS_TBIPA_VALUE 8
569#define CONFIG_MII /* MII PHY management */
570#define CONFIG_ETHPRIME "FM1@DTSEC1"
571#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
572#endif
573
574/*
575 * Environment
576 */
577#define CONFIG_LOADS_ECHO /* echo on for serial download */
578#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
579
580/*
581 * Command line configuration.
582 */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800583#define CONFIG_CMD_ERRATA
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800584#define CONFIG_CMD_IRQ
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800585
586#ifdef CONFIG_PCI
587#define CONFIG_CMD_PCI
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800588#endif
589
590/*
591* USB
592*/
ramneek mehresh3d7506f2012-04-18 19:39:53 +0000593#define CONFIG_HAS_FSL_DR_USB
594#define CONFIG_HAS_FSL_MPH_USB
595
596#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800597#define CONFIG_USB_EHCI
598#define CONFIG_USB_EHCI_FSL
599#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
ramneek mehresh3d7506f2012-04-18 19:39:53 +0000600#endif
601
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800602#ifdef CONFIG_MMC
603#define CONFIG_FSL_ESDHC
604#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
605#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800606#endif
607
Ruchika Gupta737537e2014-10-15 11:35:31 +0530608/* Hash command with SHA acceleration supported in hardware */
609#ifdef CONFIG_FSL_CAAM
610#define CONFIG_CMD_HASH
611#define CONFIG_SHA_HW_ACCEL
612#endif
613
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800614/*
615 * Miscellaneous configurable options
616 */
617#define CONFIG_SYS_LONGHELP /* undef to save memory */
618#define CONFIG_CMDLINE_EDITING /* Command-line editing */
619#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
620#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800621#ifdef CONFIG_CMD_KGDB
622#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
623#else
624#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
625#endif
626/* Print Buffer Size */
627#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
628 sizeof(CONFIG_SYS_PROMPT)+16)
629#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
630/* Boot Argument Buffer Size */
631#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800632
633/*
634 * For booting Linux, the board info and command line data
635 * have to be in the first 64 MB of memory, since this is
636 * the maximum mapped by the Linux kernel during initialization.
637 */
638#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */
639#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
640
641#ifdef CONFIG_CMD_KGDB
642#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800643#endif
644
645/*
646 * Environment Configuration
647 */
Joe Hershberger8b3637c2011-10-13 13:03:47 +0000648#define CONFIG_ROOTPATH "/opt/nfsroot"
Joe Hershbergerb3f44c22011-10-13 13:03:48 +0000649#define CONFIG_BOOTFILE "uImage"
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800650#define CONFIG_UBOOTPATH u-boot.bin
651
652/* default location for tftp and bootm */
653#define CONFIG_LOADADDR 1000000
654
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800655#define __USB_PHY_TYPE utmi
656
657#define CONFIG_EXTRA_ENV_SETTINGS \
658 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
659 "bank_intlv=cs0_cs1\0" \
660 "netdev=eth0\0" \
Marek Vasut5368c552012-09-23 17:41:24 +0200661 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
662 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800663 "tftpflash=tftpboot $loadaddr $uboot && " \
664 "protect off $ubootaddr +$filesize && " \
665 "erase $ubootaddr +$filesize && " \
666 "cp.b $loadaddr $ubootaddr $filesize && " \
667 "protect on $ubootaddr +$filesize && " \
668 "cmp.b $loadaddr $ubootaddr $filesize\0" \
669 "consoledev=ttyS0\0" \
Marek Vasut5368c552012-09-23 17:41:24 +0200670 "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800671 "usb_dr_mode=host\0" \
672 "ramdiskaddr=2000000\0" \
673 "ramdiskfile=p2041rdb/ramdisk.uboot\0" \
Scott Woodb24a4f62016-07-19 17:52:06 -0500674 "fdtaddr=1e00000\0" \
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800675 "fdtfile=p2041rdb/p2041rdb.dtb\0" \
Kim Phillips32465842014-05-14 19:33:45 -0500676 "bdev=sda3\0"
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800677
678#define CONFIG_HDBOOT \
679 "setenv bootargs root=/dev/$bdev rw " \
680 "console=$consoledev,$baudrate $othbootargs;" \
681 "tftp $loadaddr $bootfile;" \
682 "tftp $fdtaddr $fdtfile;" \
683 "bootm $loadaddr - $fdtaddr"
684
685#define CONFIG_NFSBOOTCOMMAND \
686 "setenv bootargs root=/dev/nfs rw " \
687 "nfsroot=$serverip:$rootpath " \
688 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
689 "console=$consoledev,$baudrate $othbootargs;" \
690 "tftp $loadaddr $bootfile;" \
691 "tftp $fdtaddr $fdtfile;" \
692 "bootm $loadaddr - $fdtaddr"
693
694#define CONFIG_RAMBOOTCOMMAND \
695 "setenv bootargs root=/dev/ram rw " \
696 "console=$consoledev,$baudrate $othbootargs;" \
697 "tftp $ramdiskaddr $ramdiskfile;" \
698 "tftp $loadaddr $bootfile;" \
699 "tftp $fdtaddr $fdtfile;" \
700 "bootm $loadaddr $ramdiskaddr $fdtaddr"
701
702#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
703
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800704#include <asm/fsl_secure_boot.h>
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800705
Mingkai Hu4f1d1b72011-07-07 12:29:15 +0800706#endif /* __CONFIG_H */