blob: a4ae304ade4586e46edd9f73cc7f9b3645ce9ecd [file] [log] [blame]
Stefano Babicd81b27a2012-10-10 21:11:46 +00001/*
2 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
3 *
4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
5 *
6 * Configuration for the woodburn board.
7 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02008 * SPDX-License-Identifier: GPL-2.0+
Stefano Babicd81b27a2012-10-10 21:11:46 +00009 */
10
11#ifndef __WOODBURN_COMMON_CONFIG_H
12#define __WOODBURN_COMMON_CONFIG_H
13
14#include <asm/arch/imx-regs.h>
15
16 /* High Level Configuration Options */
Stefano Babicd81b27a2012-10-10 21:11:46 +000017#define CONFIG_MX35
18#define CONFIG_MX35_HCLK_FREQ 24000000
Gong Qianyu18fb0e32015-10-26 19:47:42 +080019#define CONFIG_SYS_FSL_CLK
Stefano Babicd81b27a2012-10-10 21:11:46 +000020
21#define CONFIG_SYS_DCACHE_OFF
22#define CONFIG_SYS_CACHELINE_SIZE 32
23
24#define CONFIG_DISPLAY_CPUINFO
25
26/* Only in case the value is not present in mach-types.h */
27#ifndef MACH_TYPE_FLEA3
28#define MACH_TYPE_FLEA3 3668
29#endif
30
31#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
32
33/* This is required to setup the ESDC controller */
34
35#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
36#define CONFIG_REVISION_TAG
37#define CONFIG_SETUP_MEMORY_TAGS
38#define CONFIG_INITRD_TAG
39
40/*
41 * Size of malloc() pool
42 */
43#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
44
45/*
46 * Hardware drivers
47 */
tremb089d032013-09-21 18:13:36 +020048#define CONFIG_SYS_I2C
49#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)03544c62015-09-21 22:43:38 +020050#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
51#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
York Sunf8cb1012015-03-20 10:20:40 -070052#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
tremb089d032013-09-21 18:13:36 +020053#define CONFIG_SYS_SPD_BUS_NUM 0
Stefano Babicd81b27a2012-10-10 21:11:46 +000054#define CONFIG_MXC_SPI
55#define CONFIG_MXC_GPIO
56
57/* PMIC Controller */
Stefano Babic05a860c2012-12-08 12:02:45 +010058#define CONFIG_POWER
59#define CONFIG_POWER_I2C
60#define CONFIG_POWER_FSL
Simon Glass913702c2014-05-20 06:01:34 -060061#define CONFIG_POWER_FSL_MC13892
Stefano Babicd81b27a2012-10-10 21:11:46 +000062#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
63#define CONFIG_RTC_MC13XXX
64
Stefano Babicd81b27a2012-10-10 21:11:46 +000065/* mmc driver */
66#define CONFIG_MMC
67#define CONFIG_GENERIC_MMC
68#define CONFIG_FSL_ESDHC
69#define CONFIG_SYS_FSL_ESDHC_ADDR 0
70#define CONFIG_SYS_FSL_ESDHC_NUM 1
71
72/*
73 * UART (console)
74 */
75#define CONFIG_MXC_UART
76#define CONFIG_MXC_UART_BASE UART1_BASE
77
78/* allow to overwrite serial and ethaddr */
79#define CONFIG_ENV_OVERWRITE
80#define CONFIG_CONS_INDEX 1
81#define CONFIG_BAUDRATE 115200
82
83/*
84 * Command definition
85 */
Stefano Babicd81b27a2012-10-10 21:11:46 +000086#define CONFIG_CMD_DATE
Stefano Babicd81b27a2012-10-10 21:11:46 +000087#define CONFIG_BOOTP_SUBNETMASK
88#define CONFIG_BOOTP_GATEWAY
89#define CONFIG_BOOTP_DNS
90
91#define CONFIG_CMD_NAND
Stefano Babicd81b27a2012-10-10 21:11:46 +000092
Stefano Babicd81b27a2012-10-10 21:11:46 +000093#define CONFIG_DOS_PARTITION
94#define CONFIG_EFI_PARTITION
Stefano Babicd81b27a2012-10-10 21:11:46 +000095
Stefano Babicd81b27a2012-10-10 21:11:46 +000096#define CONFIG_MXC_GPIO
97
98#define CONFIG_NET_RETRY_COUNT 100
99
100#define CONFIG_BOOTDELAY 3
101
102#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
103
Stefano Babicd81b27a2012-10-10 21:11:46 +0000104/*
105 * Ethernet on SOC (FEC)
106 */
107#define CONFIG_FEC_MXC
108#define IMX_FEC_BASE FEC_BASE_ADDR
109#define CONFIG_PHYLIB
110#define CONFIG_PHY_MICREL
111#define CONFIG_FEC_MXC_PHYADDR 0x1
112
113#define CONFIG_MII
114#define CONFIG_DISCOVER_PHY
115
116#define CONFIG_ARP_TIMEOUT 200UL
117
118/*
119 * Miscellaneous configurable options
120 */
121#define CONFIG_SYS_LONGHELP /* undef to save memory */
Stefano Babicd81b27a2012-10-10 21:11:46 +0000122#define CONFIG_CMDLINE_EDITING
Stefano Babicd81b27a2012-10-10 21:11:46 +0000123
124#define CONFIG_AUTO_COMPLETE
125#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
126/* Print Buffer Size */
127#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
128#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
129#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
130
131#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
132#define CONFIG_SYS_MEMTEST_END 0x10000
133
Stefano Babicd81b27a2012-10-10 21:11:46 +0000134#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
135
Stefano Babicd81b27a2012-10-10 21:11:46 +0000136/*
137 * Stack sizes
138 *
139 * The stack sizes are set up in start.S using the settings below
140 */
141#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
142
143/*
144 * Physical Memory Map
145 */
146#define CONFIG_NR_DRAM_BANKS 1
147#define PHYS_SDRAM_1 CSD0_BASE_ADDR
148#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024)
149
150#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
151
152#define CONFIG_SYS_GBL_DATA_OFFSET (LOW_LEVEL_SRAM_STACK - \
153 IRAM_BASE_ADDR - \
154 GENERATED_GBL_DATA_SIZE)
155#define CONFIG_SYS_INIT_SP_ADDR (IRAM_BASE_ADDR + \
156 CONFIG_SYS_GBL_DATA_OFFSET)
157
158/*
159 * MTD Command for mtdparts
160 */
161#define CONFIG_CMD_MTDPARTS
162#define CONFIG_MTD_DEVICE
163#define CONFIG_FLASH_CFI_MTD
164#define CONFIG_MTD_PARTITIONS
165#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0"
166#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \
167 "32m(rootfb)," \
168 "64m(pcache)," \
169 "64m(app1)," \
170 "10m(app2),-(spool);" \
171 "physmap-flash.0:512k(u-boot),64k(env1)," \
172 "64k(env2),3776k(kernel1),3776k(kernel2)"
173
174/*
175 * FLASH and environment organization
176 */
177#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
178#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
179#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
180/* Monitor at beginning of flash */
181#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
182#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
183
184#define CONFIG_ENV_SECT_SIZE (128 * 1024)
185#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
186
187/* Address and size of Redundant Environment Sector */
188#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
189#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
190
191#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
192 CONFIG_SYS_MONITOR_LEN)
193
194#define CONFIG_ENV_IS_IN_FLASH
195
196/*
197 * CFI FLASH driver setup
198 */
199#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
200#define CONFIG_FLASH_CFI_DRIVER
201
202/* A non-standard buffered write algorithm */
203#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */
204#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
205
206/*
207 * NAND FLASH driver setup
208 */
209#define CONFIG_NAND_MXC
210#define CONFIG_NAND_MXC_V1_1
211#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
212#define CONFIG_SYS_MAX_NAND_DEVICE 1
213#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
214#define CONFIG_MXC_NAND_HWECC
215#define CONFIG_SYS_NAND_LARGEPAGE
216
217#if 0
218#define CONFIG_MTD_DEBUG
219#define CONFIG_MTD_DEBUG_VERBOSE 7
220#endif
221#define CONFIG_SYS_NAND_ONFI_DETECTION
222
223/*
224 * Default environment and default scripts
225 * to update uboot and load kernel
226 */
Stefano Babicd81b27a2012-10-10 21:11:46 +0000227
228#define CONFIG_HOSTNAME woodburn
229#define CONFIG_EXTRA_ENV_SETTINGS \
230 "netdev=eth0\0" \
231 "nfsargs=setenv bootargs root=/dev/nfs rw " \
232 "nfsroot=${serverip}:${rootpath}\0" \
233 "ramargs=setenv bootargs root=/dev/ram rw\0" \
234 "addip_sta=setenv bootargs ${bootargs} " \
235 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
236 ":${hostname}:${netdev}:off panic=1\0" \
237 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
238 "addip=if test -n ${ipdyn};then run addip_dyn;" \
239 "else run addip_sta;fi\0" \
240 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
241 "addtty=setenv bootargs ${bootargs}" \
242 " console=ttymxc0,${baudrate}\0" \
243 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
244 "loadaddr=80800000\0" \
245 "kernel_addr_r=80800000\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200246 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
247 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
248 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
Stefano Babicd81b27a2012-10-10 21:11:46 +0000249 "flash_self=run ramargs addip addtty addmtd addmisc;" \
250 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
251 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
252 "bootm ${kernel_addr}\0" \
253 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
254 "run nfsargs addip addtty addmtd addmisc;" \
255 "bootm ${kernel_addr_r}\0" \
256 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
257 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
258 "net_self=if run net_self_load;then " \
259 "run ramargs addip addtty addmtd addmisc;" \
260 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
261 "else echo Images not loades;fi\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200262 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
Stefano Babicd81b27a2012-10-10 21:11:46 +0000263 "load=tftp ${loadaddr} ${u-boot}\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +0200264 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
Stefano Babicd81b27a2012-10-10 21:11:46 +0000265 "update=protect off ${uboot_addr} +80000;" \
266 "erase ${uboot_addr} +80000;" \
267 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
268 "upd=if run load;then echo Updating u-boot;if run update;" \
269 "then echo U-Boot updated;" \
270 "else echo Error updating u-boot !;" \
271 "echo Board without bootloader !!;" \
272 "fi;" \
273 "else echo U-Boot not downloaded..exiting;fi\0" \
274 "bootcmd=run net_nfs\0"
275
276#endif /* __CONFIG_H */