blob: 4c469e3ba88100b8b60219341f91c8dae3c154de [file] [log] [blame]
wdenk75dc29e2002-08-19 15:30:13 +00001/*
Wolfgang Denk7c803be2008-09-16 18:02:19 +02002 * (C) Copyright 2000-2008
wdenk75dc29e2002-08-19 15:30:13 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31#undef TQM8xxL_80MHz /* 1 / * define for 80 MHz CPU only */
32
33/*
34 * High Level Configuration Options
35 * (easy to change)
36 */
37
38#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
39#define CONFIG_SM850 1 /*...on a MPC850 Service Module */
40
41#undef CONFIG_8xx_CONS_SMC1 /* SMC1 not usable because Ethernet on SCC3 */
42#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
43#undef CONFIG_8xx_CONS_NONE
44#define CONFIG_BAUDRATE 115200
45#if 0
46#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
47#else
48#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
49#endif
50
51#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
52
53#define CONFIG_BOARD_TYPES 1 /* support board types */
54
55#undef CONFIG_BOOTARGS
56#define CONFIG_BOOTCOMMAND \
Wolfgang Denk53677ef2008-05-20 16:00:29 +020057 "bootp; " \
58 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
59 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
wdenk75dc29e2002-08-19 15:30:13 +000060 "bootm"
61
62#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020063#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
wdenk75dc29e2002-08-19 15:30:13 +000064
65#undef CONFIG_WATCHDOG /* watchdog disabled */
66
67#undef CONFIG_STATUS_LED /* Status LED not enabled */
68
69#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
70
Jon Loeliger18225e82007-07-09 21:31:24 -050071/*
72 * BOOTP options
73 */
74#define CONFIG_BOOTP_SUBNETMASK
75#define CONFIG_BOOTP_GATEWAY
76#define CONFIG_BOOTP_HOSTNAME
77#define CONFIG_BOOTP_BOOTPATH
78#define CONFIG_BOOTP_BOOTFILESIZE
79
wdenk75dc29e2002-08-19 15:30:13 +000080
81#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
82
wdenk75dc29e2002-08-19 15:30:13 +000083
Jon Loeligerfe7f7822007-07-08 15:02:44 -050084/*
85 * Command line configuration.
86 */
87#include <config_cmd_default.h>
88
89#define CONFIG_CMD_DHCP
90#define CONFIG_CMD_DATE
91
wdenk75dc29e2002-08-19 15:30:13 +000092
93/*
94 * Miscellaneous configurable options
95 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020096#define CONFIG_SYS_LONGHELP /* undef to save memory */
97#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeligerfe7f7822007-07-08 15:02:44 -050098#if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk75dc29e2002-08-19 15:30:13 +0000100#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200101#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk75dc29e2002-08-19 15:30:13 +0000102#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
104#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
105#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk75dc29e2002-08-19 15:30:13 +0000106
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200107#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
108#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenk75dc29e2002-08-19 15:30:13 +0000109
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200110#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
wdenk75dc29e2002-08-19 15:30:13 +0000111
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200112#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenk75dc29e2002-08-19 15:30:13 +0000113
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200114#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenk75dc29e2002-08-19 15:30:13 +0000115
116/*
117 * Low Level Configuration Settings
118 * (address mappings, register initial values, etc.)
119 * You should know what you are doing if you make changes here.
120 */
121/*-----------------------------------------------------------------------
122 * Internal Memory Mapped Register
123 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124#define CONFIG_SYS_IMMR 0xFFF00000
wdenk75dc29e2002-08-19 15:30:13 +0000125
126/*-----------------------------------------------------------------------
127 * Definitions for initial stack pointer and data area (in DPRAM)
128 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200129#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
130#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
131#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
132#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
133#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenk75dc29e2002-08-19 15:30:13 +0000134
135/*-----------------------------------------------------------------------
136 * Start addresses for the final memory configuration
137 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenk75dc29e2002-08-19 15:30:13 +0000139 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200140#define CONFIG_SYS_SDRAM_BASE 0x00000000
141#define CONFIG_SYS_FLASH_BASE 0x40000000
wdenk75dc29e2002-08-19 15:30:13 +0000142#if defined(DEBUG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
wdenk75dc29e2002-08-19 15:30:13 +0000144#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
wdenk75dc29e2002-08-19 15:30:13 +0000146#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
148#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
wdenk75dc29e2002-08-19 15:30:13 +0000149
150/*
151 * For booting Linux, the board info and command line data
152 * have to be in the first 8 MB of memory, since this is
153 * the maximum mapped by the Linux kernel during initialization.
154 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenk75dc29e2002-08-19 15:30:13 +0000156
157/*-----------------------------------------------------------------------
158 * FLASH organization
159 */
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200160/* use CFI flash driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200161#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200162#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size }
164#define CONFIG_SYS_FLASH_EMPTY_INFO
165#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
166#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
167#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
wdenk75dc29e2002-08-19 15:30:13 +0000168
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200169#define CONFIG_ENV_IS_IN_FLASH 1
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200170#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200171#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
wdenk75dc29e2002-08-19 15:30:13 +0000172
Wolfgang Denk7c803be2008-09-16 18:02:19 +0200173#define CONFIG_MISC_INIT_R /* Make sure to remap flashes correctly */
174
wdenk75dc29e2002-08-19 15:30:13 +0000175/*-----------------------------------------------------------------------
176 * Hardware Information Block
177 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200178#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
179#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
180#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
wdenk75dc29e2002-08-19 15:30:13 +0000181
182/*-----------------------------------------------------------------------
183 * Cache Configuration
184 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeligerfe7f7822007-07-08 15:02:44 -0500186#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200187#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
wdenk75dc29e2002-08-19 15:30:13 +0000188#endif
189
190/*-----------------------------------------------------------------------
191 * SYPCR - System Protection Control 11-9
192 * SYPCR can only be written once after reset!
193 *-----------------------------------------------------------------------
194 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
195 */
196#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
wdenk75dc29e2002-08-19 15:30:13 +0000198 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
199#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200200#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
wdenk75dc29e2002-08-19 15:30:13 +0000201#endif
202
203/*-----------------------------------------------------------------------
204 * SIUMCR - SIU Module Configuration 11-6
205 *-----------------------------------------------------------------------
206 * PCMCIA config., multi-function pin tri-state
207 */
208#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200209#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenk75dc29e2002-08-19 15:30:13 +0000210#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
wdenk75dc29e2002-08-19 15:30:13 +0000212#endif /* CONFIG_CAN_DRIVER */
213
214/*-----------------------------------------------------------------------
215 * TBSCR - Time Base Status and Control 11-26
216 *-----------------------------------------------------------------------
217 * Clear Reference Interrupt Status, Timebase freezing enabled
218 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200219#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
wdenk75dc29e2002-08-19 15:30:13 +0000220
221/*-----------------------------------------------------------------------
222 * RTCSC - Real-Time Clock Status and Control Register 11-27
223 *-----------------------------------------------------------------------
224 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200225#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
wdenk75dc29e2002-08-19 15:30:13 +0000226
227/*-----------------------------------------------------------------------
228 * PISCR - Periodic Interrupt Status and Control 11-31
229 *-----------------------------------------------------------------------
230 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
231 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200232#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
wdenk75dc29e2002-08-19 15:30:13 +0000233
234/*-----------------------------------------------------------------------
235 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
236 *-----------------------------------------------------------------------
237 * Reset PLL lock status sticky bit, timer expired status bit and timer
238 * interrupt status bit
239 *
240 * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
241 */
242#ifdef TQM8xxL_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200243#define CONFIG_SYS_PLPRCR \
wdenk75dc29e2002-08-19 15:30:13 +0000244 ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
245#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200246#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenk75dc29e2002-08-19 15:30:13 +0000247#endif /* TQM8xxL_80MHz */
248
249/*-----------------------------------------------------------------------
250 * SCCR - System Clock and reset Control Register 15-27
251 *-----------------------------------------------------------------------
252 * Set clock output, timebase and RTC source and divider,
253 * power management and some other internal clocks
254 */
255#define SCCR_MASK SCCR_EBDF11
256#ifdef TQM8xxL_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200257#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ \
wdenk75dc29e2002-08-19 15:30:13 +0000258 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
259 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
260 SCCR_DFALCD00)
261#else /* up to 50 MHz we use a 1:1 clock */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200262#define CONFIG_SYS_SCCR (SCCR_TBS | \
wdenk75dc29e2002-08-19 15:30:13 +0000263 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
264 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
265 SCCR_DFALCD00)
266#endif /* TQM8xxL_80MHz */
267
268/*-----------------------------------------------------------------------
269 * PCMCIA stuff
270 *-----------------------------------------------------------------------
271 *
272 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
274#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
275#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
276#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
277#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
278#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
279#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
280#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
wdenk75dc29e2002-08-19 15:30:13 +0000281
282/*-----------------------------------------------------------------------
283 *
284 *-----------------------------------------------------------------------
285 *
286 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200287#define CONFIG_SYS_DER 0
wdenk75dc29e2002-08-19 15:30:13 +0000288
289/*
290 * Init Memory Controller:
291 *
292 * BR0/1 and OR0/1 (FLASH)
293 */
294
295#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
296#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
297
298/* used to re-map FLASH both when starting from SRAM or FLASH:
299 * restrict access enough to keep SRAM working (if any)
300 * but not too much to meddle with FLASH accesses
301 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200302#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
303#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
wdenk75dc29e2002-08-19 15:30:13 +0000304
305/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200306#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
wdenk75dc29e2002-08-19 15:30:13 +0000307 OR_SCY_5_CLK | OR_EHTR)
308
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200309#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
310#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
311#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
wdenk75dc29e2002-08-19 15:30:13 +0000312
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200313#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
314#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
315#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
wdenk75dc29e2002-08-19 15:30:13 +0000316
317/*
318 * BR2/3 and OR2/3 (SDRAM)
319 *
320 */
321#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
322#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
323#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
324
325/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200326#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
wdenk75dc29e2002-08-19 15:30:13 +0000327
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200328#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
329#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenk75dc29e2002-08-19 15:30:13 +0000330
331#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200332#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
333#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
wdenk75dc29e2002-08-19 15:30:13 +0000334#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200335#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
336#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
337#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
338#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
wdenk75dc29e2002-08-19 15:30:13 +0000339 BR_PS_8 | BR_MS_UPMB | BR_V )
340#endif /* CONFIG_CAN_DRIVER */
341
342/*
343 * Memory Periodic Timer Prescaler
344 */
345
346/* periodic timer for refresh */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
wdenk75dc29e2002-08-19 15:30:13 +0000348
349/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200350#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
351#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
wdenk75dc29e2002-08-19 15:30:13 +0000352
353/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200354#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
355#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
wdenk75dc29e2002-08-19 15:30:13 +0000356
357/*
358 * MAMR settings for SDRAM
359 */
360
361/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200362#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenk75dc29e2002-08-19 15:30:13 +0000363 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
364 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
365/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200366#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
wdenk75dc29e2002-08-19 15:30:13 +0000367 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
368 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
369
370
371/*
372 * Internal Definitions
373 *
374 * Boot Flags
375 */
376#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
377#define BOOTFLAG_WARM 0x02 /* Software reboot */
378
379#endif /* __CONFIG_H */