blob: c7c3e7d8b3c81c8f4b1711d601b1a5869e5ca56e [file] [log] [blame]
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +02001/*
2 * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
3 * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun8i-h3.dtsi"
46#include "sunxi-common-regulators.dtsi"
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/input.h>
50
51/ {
52 aliases {
53 serial0 = &uart0;
54 };
55
56 chosen {
57 stdout-path = "serial0:115200n8";
58 };
59
60 leds {
61 compatible = "gpio-leds";
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020062
Andre Przywara8fcf1fa2021-05-25 01:20:25 +010063 led-0 {
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020064 label = "nanopi:blue:status";
65 gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
66 linux,default-trigger = "heartbeat";
67 };
68
Andre Przywara8fcf1fa2021-05-25 01:20:25 +010069 led-1 {
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020070 label = "nanopi:green:pwr";
71 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
72 default-state = "on";
73 };
74 };
75
76 r_gpio_keys {
77 compatible = "gpio-keys";
78 input-name = "k1";
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020079
Andre Przywara2d0c3d62018-07-04 14:16:38 +010080 k1 {
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020081 label = "k1";
82 linux,code = <KEY_POWER>;
83 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
84 };
85 };
86};
87
88&ehci3 {
89 status = "okay";
90};
91
92&mmc0 {
93 bus-width = <4>;
Andre Przywara2d0c3d62018-07-04 14:16:38 +010094 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +020095 status = "okay";
96 vmmc-supply = <&reg_vcc3v3>;
97};
98
99&ohci3 {
100 status = "okay";
101};
102
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +0200103&uart0 {
104 pinctrl-names = "default";
Chen-Yu Tsaib5fe5232020-01-12 23:36:13 +0800105 pinctrl-0 = <&uart0_pa_pins>;
Mylene JOSSERANDa647ea12017-05-10 08:26:07 +0200106 status = "okay";
107};
108
109&usbphy {
110 status = "okay";
111};