Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 74102834154c2e575c14e050a62f63e2e52f96de / . / drivers / usb / host / Kconfig
blob: 2f381dc9580c37794d86efeddca63e6dc2eac18d [file] [log] [blame]
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]1#
2# USB Host Controller Drivers
3#
4comment "USB Host Controller Drivers"
5
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]6config USB_HOST
7 bool
8
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]9config USB_XHCI_HCD
10 bool "xHCI HCD (USB 3.0) support"
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]11 select USB_HOST
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]12 ---help---
13 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
14 "SuperSpeed" host controller hardware.
15
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]16if USB_XHCI_HCD
17
Masahiro Yamada10db7502016-06-04 07:35:04 +0900[diff] [blame]18config USB_XHCI_DWC3
19 bool "DesignWare USB3 DRD Core Support"
20 help
21 Say Y or if your system has a Dual Role SuperSpeed
22 USB controller based on the DesignWare USB3 IP Core.
23
Neil Armstrongca7fdc82018-04-11 17:08:00 +0200[diff] [blame]24config USB_XHCI_DWC3_OF_SIMPLE
25 bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
Jean-Jacques Hiblot103774b2018-04-12 10:41:10 +0200[diff] [blame]26 depends on DM_USB
Mark Kettenisaaa8d6b2019-06-30 18:01:54 +0200[diff] [blame]27 default y if ARCH_ROCKCHIP
Jean-Jacques Hiblotcc73ba92018-04-12 10:41:11 +0200[diff] [blame]28 default y if DRA7XX
Neil Armstrongca7fdc82018-04-11 17:08:00 +0200[diff] [blame]29 help
30 Support USB2/3 functionality in simple SoC integrations with
31 USB controller based on the DesignWare USB3 IP Core.
32
Chunfeng Yun74102832020-05-02 11:35:18 +0200[diff] [blame^]33config USB_XHCI_MTK
34 bool "Support for MediaTek on-chip xHCI USB controller"
35 depends on ARCH_MEDIATEK
36 help
37 Enables support for the on-chip xHCI controller on MediaTek SoCs.
38
Stefan Roese81c1f6f2016-07-14 11:39:20 +0200[diff] [blame]39config USB_XHCI_MVEBU
40 bool "MVEBU USB 3.0 support"
41 default y
42 depends on ARCH_MVEBU
Konstantin Porotchkin81192b72017-02-12 11:10:30 +0200[diff] [blame]43 select DM_REGULATOR
Stefan Roese81c1f6f2016-07-14 11:39:20 +0200[diff] [blame]44 help
45 Choose this option to add support for USB 3.0 driver on mvebu
46 SoCs, which includes Armada8K, Armada3700 and other Armada
47 family SoCs.
48
Bin Mengd7cde282017-07-19 21:50:08 +0800[diff] [blame]49config USB_XHCI_PCI
50 bool "Support for PCI-based xHCI USB controller"
Bin Meng978f6a32017-07-19 21:51:07 +0800[diff] [blame]51 depends on DM_USB
Bin Mengd7cde282017-07-19 21:50:08 +0800[diff] [blame]52 default y if X86
53 help
54 Enables support for the PCI-based xHCI controller.
55
Kever Yangf7bb27a2016-09-21 11:35:42 +0800[diff] [blame]56config USB_XHCI_ROCKCHIP
57 bool "Support for Rockchip on-chip xHCI USB controller"
58 depends on ARCH_ROCKCHIP
Meng Dongyange85f00a2017-06-28 19:22:39 +0800[diff] [blame]59 depends on DM_REGULATOR
60 depends on DM_USB
Kever Yangf7bb27a2016-09-21 11:35:42 +0800[diff] [blame]61 default y
62 help
63 Enables support for the on-chip xHCI controller on Rockchip SoCs.
64
Marek Vasute1cc60c2017-10-15 15:01:29 +0200[diff] [blame]65config USB_XHCI_RCAR
66 bool "Renesas RCar USB 3.0 support"
67 default y
68 depends on ARCH_RMOBILE
69 help
70 Choose this option to add support for USB 3.0 driver on Renesas
71 RCar Gen3 SoCs.
72
Patrice Chotard40d1a312017-09-05 11:04:24 +0200[diff] [blame]73config USB_XHCI_STI
74 bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller"
75 depends on ARCH_STI
76 default y
77 help
78 Enables support for the on-chip xHCI controller on STMicroelectronics
79 STiH407 family SoCs. This is a driver for the dwc3 to provide the glue logic
80 to configure the controller.
81
Uri Mashiachef3f3b82017-02-23 15:39:36 +0200[diff] [blame]82config USB_XHCI_DRA7XX_INDEX
83 int "DRA7XX xHCI USB index"
84 range 0 1
85 default 0
86 depends on DRA7XX
87 help
88 Select the DRA7XX xHCI USB index.
89 Current supported values: 0, 1.
90
Ran Wang420b0eb2017-10-23 10:09:22 +0800[diff] [blame]91config USB_XHCI_FSL
92 bool "Support for NXP Layerscape on-chip xHCI USB controller"
93 default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2
94 depends on !SPL_NO_USB
95 help
96 Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
Rayagonda Kokatanur9cadf052020-04-09 09:23:15 +0530[diff] [blame]97
98config USB_XHCI_BRCM
99 bool "Broadcom USB3 Host XHCI controller"
100 depends on DM_USB
101 help
102 USB controller based on the Broadcom USB3 IP Core.
103 Supports USB2/3 functionality.
104
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]105endif # USB_XHCI_HCD
Alexey Brodkinfee331f2015-12-14 17:18:50 +0300[diff] [blame]106
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]107config USB_EHCI_HCD
108 bool "EHCI HCD (USB 2.0) support"
Tom Rini64d6ac52017-05-12 22:33:28 -0400[diff] [blame]109 default y if ARCH_MX5 || ARCH_MX6
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]110 select USB_HOST
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]111 ---help---
112 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
113 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
114 If your USB host controller supports USB 2.0, you will likely want to
115 configure this Host Controller Driver.
116
117 EHCI controllers are packaged with "companion" host controllers (OHCI
118 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
119 will connect to EHCI if the device is high speed, otherwise they
120 connect to a companion controller. If you configure EHCI, you should
121 probably configure the OHCI (for NEC and some other vendors) USB Host
122 Controller Driver or UHCI (for Via motherboards) Host Controller
123 Driver too.
124
125 You may want to read <file:Documentation/usb/ehci.txt>.
126
Masahiro Yamada6e7e9292014-11-07 18:48:31 +0900[diff] [blame]127if USB_EHCI_HCD
128
Wenyou Yang17b68b52016-08-05 08:57:35 +0800[diff] [blame]129config USB_EHCI_ATMEL
130 bool "Support for Atmel on-chip EHCI USB controller"
131 depends on ARCH_AT91
132 default y
133 ---help---
134 Enables support for the on-chip EHCI controller on Atmel chips.
135
Stefan Roesecd482252015-09-01 11:39:44 +0200[diff] [blame]136config USB_EHCI_MARVELL
Tom Rini80f1f322017-05-12 22:33:29 -0400[diff] [blame]137 bool "Support for Marvell on-chip EHCI USB controller"
138 depends on ARCH_MVEBU || KIRKWOOD || ORION5X
Stefan Roesecd482252015-09-01 11:39:44 +0200[diff] [blame]139 default y
140 ---help---
141 Enables support for the on-chip EHCI controller on MVEBU SoCs.
142
Lukasz Majewski400b9722019-04-04 12:26:55 +0200[diff] [blame]143config USB_EHCI_MX5
144 bool "Support for i.MX5 on-chip EHCI USB controller"
145 depends on ARCH_MX5
146 default n
147 help
148 Enables support for the on-chip EHCI controller on i.MX5 SoCs.
149
Nikita Kiryanov919e8022015-07-23 17:19:35 +0300[diff] [blame]150config USB_EHCI_MX6
Ye Li235f5e12019-10-24 10:29:32 -0300[diff] [blame]151 bool "Support for i.MX6/i.MX7ULP on-chip EHCI USB controller"
152 depends on ARCH_MX6 || ARCH_MX7ULP
Nikita Kiryanov919e8022015-07-23 17:19:35 +0300[diff] [blame]153 default y
154 ---help---
155 Enables support for the on-chip EHCI controller on i.MX6 SoCs.
156
Stefan Agner2deebe22016-07-13 00:25:36 -0700[diff] [blame]157config USB_EHCI_MX7
158 bool "Support for i.MX7 on-chip EHCI USB controller"
159 depends on ARCH_MX7
160 default y
161 ---help---
162 Enables support for the on-chip EHCI controller on i.MX7 SoCs.
163
Tom Rini1d1ab612017-05-12 22:33:30 -0400[diff] [blame]164config USB_EHCI_OMAP
165 bool "Support for OMAP3+ on-chip EHCI USB controller"
166 depends on ARCH_OMAP2PLUS
167 default y
168 ---help---
169 Enables support for the on-chip EHCI controller on OMAP3 and later
170 SoCs.
171
Marcel Ziswiler20df4b52019-03-25 17:24:54 +0100[diff] [blame]172config USB_EHCI_VF
173 bool "Support for Vybrid on-chip EHCI USB controller"
174 depends on ARCH_VF610
175 default y
176 help
177 Enables support for the on-chip EHCI controller on Vybrid SoCs.
178
Ye Li235f5e12019-10-24 10:29:32 -0300[diff] [blame]179if USB_EHCI_MX6 || USB_EHCI_MX7
Stefan Agnerc4483092016-07-13 00:25:38 -0700[diff] [blame]180
181config MXC_USB_OTG_HACTIVE
182 bool "USB Power pin high active"
183 ---help---
184 Set the USB Power pin polarity to be high active (PWR_POL)
185
186endif
187
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]188config USB_EHCI_MSM
189 bool "Support for Qualcomm on-chip EHCI USB controller"
190 depends on DM_USB
191 select USB_ULPI_VIEWPORT
Ramon Fried0ac0b6e2018-09-21 13:35:50 +0300[diff] [blame]192 select MSM8916_USB_PHY
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]193 default n
194 ---help---
195 Enables support for the on-chip EHCI controller on Qualcomm
196 Snapdragon SoCs.
Mateusz Kulikowski5a822112016-03-31 23:12:26 +0200[diff] [blame]197
Bin Menga11a5b82017-08-09 00:21:54 -0700[diff] [blame]198config USB_EHCI_PCI
199 bool "Support for PCI-based EHCI USB controller"
200 default y if X86
201 help
202 Enables support for the PCI-based EHCI controller.
203
Peter Robinson747fed52019-02-20 12:17:27 +0000[diff] [blame]204config USB_EHCI_TEGRA
205 bool "Support for NVIDIA Tegra on-chip EHCI USB controller"
206 depends on TEGRA
207 ---help---
208 Enable support for Tegra on-chip EHCI USB controller
209
Siva Durga Prasad Paladugu2cdc7782016-07-22 14:51:51 +0530[diff] [blame]210config USB_EHCI_ZYNQ
211 bool "Support for Xilinx Zynq on-chip EHCI USB controller"
212 depends on ARCH_ZYNQ
213 default y
214 ---help---
215 Enable support for Zynq on-chip EHCI USB controller
216
Alexey Brodkin90fbb282015-12-02 12:32:02 +0300[diff] [blame]217config USB_EHCI_GENERIC
218 bool "Support for generic EHCI USB controller"
219 depends on OF_CONTROL
220 depends on DM_USB
Jagan Teki29d280c2018-12-22 18:18:10 +0530[diff] [blame]221 default ARCH_SUNXI
Alexey Brodkin90fbb282015-12-02 12:32:02 +0300[diff] [blame]222 default n
223 ---help---
224 Enables support for generic EHCI controller.
225
Ran Wang91f4fb92017-12-20 10:34:20 +0800[diff] [blame]226config USB_EHCI_FSL
227 bool "Support for FSL on-chip EHCI USB controller"
228 default n
229 select CONFIG_EHCI_HCD_INIT_AFTER_RESET
230 ---help---
231 Enables support for the on-chip EHCI controller on FSL chips.
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]232endif # USB_EHCI_HCD
233
234config USB_OHCI_HCD
235 bool "OHCI HCD (USB 1.1) support"
236 ---help---
237 The Open Host Controller Interface (OHCI) is a standard for accessing
238 USB 1.1 host controller hardware. It does more in hardware than Intel's
239 UHCI specification. If your USB host controller follows the OHCI spec,
240 say Y. On most non-x86 systems, and on x86 hardware that's not using a
241 USB controller from Intel or VIA, this is appropriate. If your host
242 controller doesn't use PCI, this is probably appropriate. For a PCI
243 based system where you're not sure, the "lspci -v" entry will list the
244 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
245
Heiko Schocher991e6602019-07-16 10:49:07 +0200[diff] [blame]246config USB_OHCI_PCI
247 bool "Support for PCI-based OHCI USB controller"
248 depends on DM_USB
249 default n
250 help
251 Enables support for the PCI-based OHCI controller.
252
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]253if USB_OHCI_HCD
254
255config USB_OHCI_GENERIC
256 bool "Support for generic OHCI USB controller"
257 depends on OF_CONTROL
258 depends on DM_USB
Jagan Teki29d280c2018-12-22 18:18:10 +0530[diff] [blame]259 default ARCH_SUNXI
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]260 select USB_HOST
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]261 ---help---
262 Enables support for generic OHCI controller.
263
Adam Ford9da54742019-04-30 05:21:41 -0500[diff] [blame]264config USB_OHCI_DA8XX
265 bool "Support for da850 OHCI USB controller"
266 help
267 Enable support for the da850 USB controller.
268
Masahiro Yamada93cb8242016-08-01 00:16:32 +0900[diff] [blame]269endif # USB_OHCI_HCD
Masahiro Yamada96d82842016-08-01 00:16:33 +0900[diff] [blame]270
271config USB_UHCI_HCD
272 bool "UHCI HCD (most Intel and VIA) support"
Masahiro Yamada2b58e1b2016-08-01 00:16:34 +0900[diff] [blame]273 select USB_HOST
Masahiro Yamada96d82842016-08-01 00:16:33 +0900[diff] [blame]274 ---help---
275 The Universal Host Controller Interface is a standard by Intel for
276 accessing the USB hardware in the PC (which is also called the USB
277 host controller). If your USB host controller conforms to this
278 standard, you may want to say Y, but see below. All recent boards
279 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
280 i810, i820) conform to this standard. Also all VIA PCI chipsets
281 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
282 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
283 If unsure, say Y.
284
285if USB_UHCI_HCD
286
287endif # USB_UHCI_HCD
Philipp Tomsich4ac72f52017-07-03 18:30:06 +0200[diff] [blame]288
289config USB_DWC2
290 bool "DesignWare USB2 Core support"
291 select USB_HOST
292 ---help---
293 The DesignWare USB 2.0 controller is compliant with the
294 USB-Implementers Forum (USB-IF) USB 2.0 specifications.
295 Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps)
296 operation is compliant to the controller Supplement. If you want to
297 enable this controller in host mode, say Y.
Alexey Brodkin42637fd2018-02-28 16:16:58 +0300[diff] [blame]298
299if USB_DWC2
300config USB_DWC2_BUFFER_SIZE
301 int "Data buffer size in kB"
302 default 64
303 ---help---
304 By default 64 kB buffer is used but if amount of RAM avaialble on
305 the target is not enough to accommodate allocation of buffer of
306 that size it is possible to shrink it. Smaller sizes should be fine
307 because larger transactions could be split in smaller ones.
308
309endif # USB_DWC2
Marek Vasuta3d65652019-08-11 13:23:43 +0200[diff] [blame]310
311config USB_R8A66597_HCD
312 bool "Renesas R8A66597 USB Core support"
313 depends on OF_CONTROL
314 depends on DM_USB
315 select USB_HOST
316 ---help---
317 This enables support for the on-chip Renesas R8A66597 USB 2.0
318 controller, present in various RZ and SH SoCs.