blob: c47be514d8ac8011c9c541d7db34ddb437140a2f [file] [log] [blame]
rev13@wp.pled09a552015-03-01 12:44:42 +01001/*
2 * (C) Copyright 2015
Kamil Lulko66562412015-12-01 09:08:19 +01003 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pled09a552015-03-01 12:44:42 +01004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
rev13@wp.pled09a552015-03-01 12:44:42 +010011#define CONFIG_STM32F4DISCOVERY
rev13@wp.pled09a552015-03-01 12:44:42 +010012
Antonio Borneo089fddf2015-07-19 22:19:46 +080013#define CONFIG_MISC_INIT_R
rev13@wp.pled09a552015-03-01 12:44:42 +010014
15#define CONFIG_SYS_FLASH_BASE 0x08000000
16
17#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
18#define CONFIG_SYS_TEXT_BASE 0x08000000
19
20#define CONFIG_SYS_ICACHE_OFF
21#define CONFIG_SYS_DCACHE_OFF
22
23/*
24 * Configuration of the external SDRAM memory
25 */
26#define CONFIG_NR_DRAM_BANKS 1
27#define CONFIG_SYS_RAM_SIZE (8 << 20)
28#define CONFIG_SYS_RAM_CS 1
29#define CONFIG_SYS_RAM_FREQ_DIV 2
30#define CONFIG_SYS_RAM_BASE 0xD0000000
31#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
32#define CONFIG_SYS_LOAD_ADDR 0xD0400000
33#define CONFIG_LOADADDR 0xD0400000
34
35#define CONFIG_SYS_MAX_FLASH_SECT 12
36#define CONFIG_SYS_MAX_FLASH_BANKS 2
37
rev13@wp.pled09a552015-03-01 12:44:42 +010038#define CONFIG_ENV_OFFSET (256 << 10)
39#define CONFIG_ENV_SECT_SIZE (128 << 10)
40#define CONFIG_ENV_SIZE (8 << 10)
41
rev13@wp.pled09a552015-03-01 12:44:42 +010042#define CONFIG_RED_LED 110
43#define CONFIG_GREEN_LED 109
44
45#define CONFIG_STM32_GPIO
Vikas Manocha9ecb0c42016-03-09 15:18:13 -080046#define CONFIG_STM32_FLASH
rev13@wp.pled09a552015-03-01 12:44:42 +010047#define CONFIG_STM32_SERIAL
rev13@wp.pled09a552015-03-01 12:44:42 +010048
49#define CONFIG_STM32_HSE_HZ 8000000
50
Antonio Borneof9fa4a22015-07-19 22:19:48 +080051#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
52
rev13@wp.pled09a552015-03-01 12:44:42 +010053#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
54
55#define CONFIG_CMDLINE_TAG
56#define CONFIG_SETUP_MEMORY_TAGS
57#define CONFIG_INITRD_TAG
58#define CONFIG_REVISION_TAG
59
60#define CONFIG_SYS_CBSIZE 1024
61#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
62 + sizeof(CONFIG_SYS_PROMPT) + 16)
63
64#define CONFIG_SYS_MAXARGS 16
65
66#define CONFIG_SYS_MALLOC_LEN (2 << 20)
67
rev13@wp.pled09a552015-03-01 12:44:42 +010068#define CONFIG_BOOTARGS \
rev13@wp.pl6b330562015-07-05 12:54:23 +020069 "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
rev13@wp.pled09a552015-03-01 12:44:42 +010070#define CONFIG_BOOTCOMMAND \
71 "run bootcmd_romfs"
72
73#define CONFIG_EXTRA_ENV_SETTINGS \
74 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
75 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
76 "bootm 0x08044000 - 0x08042000\0"
77
rev13@wp.pled09a552015-03-01 12:44:42 +010078/*
79 * Command line configuration.
80 */
rev13@wp.pled09a552015-03-01 12:44:42 +010081#define CONFIG_SYS_LONGHELP
rev13@wp.pled09a552015-03-01 12:44:42 +010082#define CONFIG_AUTO_COMPLETE
83#define CONFIG_CMDLINE_EDITING
84
rev13@wp.pled09a552015-03-01 12:44:42 +010085#define CONFIG_CMD_MEM
rev13@wp.pled09a552015-03-01 12:44:42 +010086
87#endif /* __CONFIG_H */