blob: 6f03de239e6073d11e95858d84b58f0f7c4166ee [file] [log] [blame]
Codrin Ciubotariu6706b112015-01-12 14:08:33 +02001This file contains information for VSC9953, a Vitesse L2 Switch IP
2which is integrated in the T1040/T1020 Freescale SoCs.
3
4About Device:
5=============
6VSC9953 is an 8-port Gigabit Ethernet switch supports the following features:
7 - 8192 MAC addresses
8 - Static Address provisioning
9 - Dynamic learning of MAC addresses and aging
10 - 4096 VLANs
11 - Independent and shared VLAN learning (IVL, SVL)
12 - Policing with storm control and MC/BC protection
13 - IPv4 and IPv6 multicast
14 - Jumbo frames (9.6 KB)
15 - Access Control List
16 - VLAN editing, translation and remarking
17 - RMON counters per port
18
19Switch interfaces:
20 - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs
21 - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links)
22 to FMan ports (FM1@DTSEC1 and FM1@DTSEC2)
23
24Commands Overview:
25=============
26Commands supported
Codrin Ciubotariu3507cf72015-12-15 15:21:04 +020027 - enable/disable a port or show its configuration (speed, duplexity, status, etc.)
28 - port statistics
29 - MAC learning
30 - add/remove FDB entries
31 - Port-based VLAN
32 - Private/Shared VLAN learning
33 - VLAN ingress filtering
Codrin Ciubotariuaae0e682015-12-15 15:21:06 +020034 - Port LAG
Codrin Ciubotariu6706b112015-01-12 14:08:33 +020035
36Commands syntax
Codrin Ciubotariu3507cf72015-12-15 15:21:04 +020037ethsw [port <port_no>] { enable | disable | show } - enable/disable a port; show a port's configuration
38ethsw [port <port_no>] statistics { [help] | [clear] } - show an l2 switch port's statistics
39ethsw [port <port_no>] learning { [help] | show | auto | disable } - enable/disable/show learning configuration on a port
40ethsw [port <port_no>] [vlan <vid>] fdb { [help] | show | flush | { add | del } <mac> } - add/delete a mac entry in FDB; use show to see FDB entries;
41 if [vlan <vid>] is missing, VID 1 will be used
42ethsw [port <port_no>] pvid { [help] | show | <pvid> } - set/show PVID (ingress and egress VLAN tagging) for a port
43ethsw [port <port_no>] vlan { [help] | show | add <vid> | del <vid> } - add a VLAN to a port (VLAN members)
44ethsw [port <port_no>] untagged { [help] | show | all | none | pvid } - set egress tagging mode for a port
45ethsw [port <port_no>] egress tag { [help] | show | pvid | classified } - configure VID source for egress tag.
46 Tag's VID could be the frame's classified VID or the PVID of the port
47ethsw vlan fdb { [help] | show | shared | private } - make VLAN learning shared or private
48ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port
Codrin Ciubotariuaae0e682015-12-15 15:21:06 +020049ethsw [port <port_no>] aggr { [help] | show | <lag_group_no> } - get/set LAG group for a port
Codrin Ciubotariu6706b112015-01-12 14:08:33 +020050
Codrin Ciubotariu3507cf72015-12-15 15:21:04 +020051=> ethsw show
Codrin Ciubotariu6706b112015-01-12 14:08:33 +020052 Port Status Link Speed Duplex
53 0 enabled down 10 half
54 1 enabled down 10 half
55 2 enabled down 10 half
56 3 enabled up 1000 full
57 4 disabled down - half
58 5 disabled down - half
59 6 disabled down - half
60 7 disabled down - half
61 8 enabled up 2500 full
62 9 enabled up 2500 full
63=>