blob: 586daccb4a0ba16c5a7b04fae1876d90328b5d66 [file] [log] [blame]
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +00001/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +00005 */
6
7#include <common.h>
8#include <asm/processor.h>
9#include <asm/mmu.h>
10#include <asm/cache.h>
11#include <asm/immap_85xx.h>
12#include <asm/io.h>
13#include <miiphy.h>
14#include <libfdt.h>
15#include <fdt_support.h>
16#include <fsl_mdio.h>
17#include <tsec.h>
18#include <mmc.h>
19#include <netdev.h>
York Sun0b665132013-10-22 12:39:02 -070020#include <fsl_ifc.h>
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +000021#include <hwconfig.h>
22#include <i2c.h>
York Sun5614e712013-09-30 09:22:09 -070023#include <fsl_ddr_sdram.h>
Ashish Kumar42a9e2f2014-10-06 18:24:56 +053024#include <jffs2/load_kernel.h>
25#include <mtd_node.h>
26#include <flash.h>
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +000027
28#ifdef CONFIG_PCI
29#include <pci.h>
30#include <asm/fsl_pci.h>
31#endif
32
33#include "../common/qixis.h"
34DECLARE_GLOBAL_DATA_PTR;
35
36
37int board_early_init_f(void)
38{
Jaiprakash Singh39b0bbb2015-03-20 19:28:27 -070039 struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +000040
Jaiprakash Singh39b0bbb2015-03-20 19:28:27 -070041 setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +000042
43 return 0;
44}
45
46void board_config_serdes_mux(void)
47{
48 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
49 u32 pordevsr = in_be32(&gur->pordevsr);
50 u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
51 MPC85xx_PORDEVSR_IO_SEL_SHIFT;
52
53 switch (srds_cfg) {
54 /* PEX(1) PEX(2) CPRI 2 CPRI 1 */
55 case 1:
56 case 2:
57 case 3:
58 case 4:
59 case 5:
60 case 22:
61 case 23:
62 case 24:
63 case 25:
64 case 26:
65 QIXIS_WRITE_I2C(brdcfg[4], 0x03);
66 break;
67
68 /* PEX(1) PEX(2) SGMII1 CPRI 1 */
69 case 6:
70 case 7:
71 case 8:
72 case 9:
73 case 10:
74 case 27:
75 case 28:
76 case 29:
77 case 30:
78 case 31:
79 QIXIS_WRITE_I2C(brdcfg[4], 0x01);
80 break;
81
82 /* PEX(1) PEX(2) SGMII1 SGMII2 */
83 case 11:
84 case 32:
85 QIXIS_WRITE_I2C(brdcfg[4], 0x00);
86 break;
87
88 /* PEX(1) SGMII2 CPRI 2 CPRI 1 */
89 case 12:
90 case 13:
91 case 14:
92 case 15:
93 case 16:
94 case 33:
95 case 34:
96 case 35:
97 case 36:
98 case 37:
99 QIXIS_WRITE_I2C(brdcfg[4], 0x07);
100 break;
101
102 /* PEX(1) SGMII2 SGMII1 CPRI 1 */
103 case 17:
104 case 18:
105 case 19:
106 case 20:
107 case 21:
108 case 38:
109 case 39:
110 case 40:
111 case 41:
112 case 42:
113 QIXIS_WRITE_I2C(brdcfg[4], 0x05);
114 break;
115
116 /* SGMII1 SGMII2 CPRI 2 CPRI 1 */
117 case 43:
118 case 44:
119 case 45:
120 case 46:
121 case 47:
122 QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
123 break;
124
125
126 default:
127 break;
128 }
129}
130
Priyanka Jainf9d379a2013-07-02 09:22:23 +0530131/* Configure DSP DDR controller */
132void dsp_ddr_configure(void)
133{
134 /*
135 *There are separate DDR-controllers for DSP and PowerPC side DDR.
136 *copy the ddr controller settings from PowerPC side DDR controller
137 *to the DSP DDR controller as connected DDR memories are similar.
138 */
York Sun9a17eb52013-11-18 10:29:32 -0800139 struct ccsr_ddr __iomem *pa_ddr =
140 (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
141 struct ccsr_ddr temp_ddr;
142 struct ccsr_ddr __iomem *dsp_ddr =
143 (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR;
Priyanka Jainf9d379a2013-07-02 09:22:23 +0530144
York Sun9a17eb52013-11-18 10:29:32 -0800145 memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr));
Priyanka Jainf9d379a2013-07-02 09:22:23 +0530146 temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS;
147 temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN;
York Sun9a17eb52013-11-18 10:29:32 -0800148 memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr));
Priyanka Jainf9d379a2013-07-02 09:22:23 +0530149 dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN;
150}
151
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000152int board_early_init_r(void)
153{
154#ifndef CONFIG_SYS_NO_FLASH
155 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
York Sun9d045682014-06-24 21:16:20 -0700156 int flash_esel = find_tlb_idx((void *)flashbase, 1);
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000157
158 /*
159 * Remap Boot flash region to caching-inhibited
160 * so that flash can be erased properly.
161 */
162
163 /* Flush d-cache and invalidate i-cache of any FLASH data */
164 flush_dcache();
165 invalidate_icache();
166
York Sun9d045682014-06-24 21:16:20 -0700167 if (flash_esel == -1) {
168 /* very unlikely unless something is messed up */
169 puts("Error: Could not find TLB for FLASH BASE\n");
170 flash_esel = 2; /* give our best effort to continue */
171 } else {
172 /* invalidate existing TLB entry for flash */
173 disable_tlb(flash_esel);
174 }
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000175
176 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
177 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
178 0, flash_esel, BOOKE_PAGESZ_64M, 1);
179
180 set_tlb(1, flashbase + 0x4000000,
181 CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
182 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
183 0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
184#endif
185 board_config_serdes_mux();
Priyanka Jainf9d379a2013-07-02 09:22:23 +0530186 dsp_ddr_configure();
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000187 return 0;
188}
189
190#ifdef CONFIG_PCI
191void pci_init_board(void)
192{
193 fsl_pcie_init_board(0);
194}
195#endif /* ifdef CONFIG_PCI */
196
197int checkboard(void)
198{
199 struct cpu_type *cpu;
200 u8 sw;
201
Simon Glass67ac13b2012-12-13 20:48:48 +0000202 cpu = gd->arch.cpu;
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000203 printf("Board: %sQDS\n", cpu->name);
204
205 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
206 QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
207
208 sw = QIXIS_READ(brdcfg[0]);
209 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
210
211 printf("IFC chip select:");
212 switch (sw) {
213 case 0:
214 printf("NOR\n");
215 break;
216 case 2:
217 printf("Promjet\n");
218 break;
219 case 4:
220 printf("NAND\n");
221 break;
222 default:
223 printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
224 break;
225 }
226
227 return 0;
228}
229
230#ifdef CONFIG_TSEC_ENET
231int board_eth_init(bd_t *bis)
232{
233 struct fsl_pq_mdio_info mdio_info;
234 struct tsec_info_struct tsec_info[4];
235 int num = 0;
236
237#ifdef CONFIG_TSEC1
238 SET_STD_TSEC_INFO(tsec_info[num], 1);
239 num++;
240
241#endif
242
243#ifdef CONFIG_TSEC2
244 SET_STD_TSEC_INFO(tsec_info[num], 2);
245 num++;
246#endif
247
248 mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
249 mdio_info.name = DEFAULT_MII_NAME;
250
251 fsl_pq_mdio_init(bis, &mdio_info);
252 tsec_eth_init(bis, tsec_info, num);
253
254 #ifdef CONFIG_PCI
255 pci_eth_init(bis);
256 #endif
257
258 return 0;
259}
260#endif
261
262#define USBMUX_SEL_MASK 0xc0
263#define USBMUX_SEL_UART2 0xc0
264#define USBMUX_SEL_USB 0x40
265#define SPIMUX_SEL_UART3 0x80
266#define GPS_MUX_SEL_GPS 0x40
267
268#define TSEC_1588_CLKIN_MASK 0x03
269#define CON_XCVR_REF_CLK 0x00
270
271int misc_init_r(void)
272{
273 u8 val;
274 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
275 u32 porbmsr = in_be32(&gur->porbmsr);
Andy Fleming8bd00c92013-06-20 14:54:33 -0500276 u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000277
278 /*Configure 1588 clock-in source from RF Card*/
279 val = QIXIS_READ_I2C(brdcfg[5]);
280 QIXIS_WRITE_I2C(brdcfg[5],
281 (val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
282
283 if (hwconfig("uart2") && hwconfig("usb1")) {
284 printf("UART2 and USB cannot work together on the board\n");
285 printf("Remove one from hwconfig and reset\n");
286 } else {
287 if (hwconfig("uart2")) {
288 val = QIXIS_READ_I2C(brdcfg[5]);
289 QIXIS_WRITE_I2C(brdcfg[5],
290 (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
291 clrbits_be32(&gur->pmuxcr3,
292 MPC85xx_PMUXCR3_USB_SEL_MASK);
293 setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
294 } else {
295 /* By default USB should be selected.
296 * Programming FPGA to select USB. */
297 val = QIXIS_READ_I2C(brdcfg[5]);
298 QIXIS_WRITE_I2C(brdcfg[5],
299 (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
300 }
301
302 }
303
304 if (hwconfig("sim")) {
305 if (romloc == PORBMSR_ROMLOC_NAND_2K ||
306 romloc == PORBMSR_ROMLOC_NOR ||
307 romloc == PORBMSR_ROMLOC_SPI) {
308
309 val = QIXIS_READ_I2C(brdcfg[3]);
310 QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
311 clrbits_be32(&gur->pmuxcr,
312 MPC85xx_PMUXCR0_SIM_SEL_MASK);
313 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
314 }
315 }
316
317 if (hwconfig("uart3")) {
318 if (romloc == PORBMSR_ROMLOC_NAND_2K ||
319 romloc == PORBMSR_ROMLOC_NOR ||
320 romloc == PORBMSR_ROMLOC_SDHC) {
321
322 /* UART3 and SPI1 (Flashes) are muxed together */
323 val = QIXIS_READ_I2C(brdcfg[3]);
324 QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
325 clrbits_be32(&gur->pmuxcr3,
326 MPC85xx_PMUXCR3_UART3_SEL_MASK);
327 setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
328
329 /* MUX to select UART3 connection to J24 header
330 * or to GPS */
331 val = QIXIS_READ_I2C(brdcfg[6]);
332 if (hwconfig("gps"))
333 QIXIS_WRITE_I2C(brdcfg[6],
334 (val | GPS_MUX_SEL_GPS));
335 else
336 QIXIS_WRITE_I2C(brdcfg[6],
337 (val & ~(GPS_MUX_SEL_GPS)));
338 }
339 }
340 return 0;
341}
342
343void fdt_del_node_compat(void *blob, const char *compatible)
344{
345 int err;
346 int off = fdt_node_offset_by_compatible(blob, -1, compatible);
347 if (off < 0) {
348 printf("WARNING: could not find compatible node %s: %s.\n",
349 compatible, fdt_strerror(off));
350 return;
351 }
352 err = fdt_del_node(blob, off);
353 if (err < 0) {
354 printf("WARNING: could not remove %s: %s.\n",
355 compatible, fdt_strerror(err));
356 }
357}
358
359#if defined(CONFIG_OF_BOARD_SETUP)
Ashish Kumar42a9e2f2014-10-06 18:24:56 +0530360#ifdef CONFIG_FDT_FIXUP_PARTITIONS
361struct node_info nodes[] = {
362 { "cfi-flash", MTD_DEV_TYPE_NOR, },
363 { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
364};
365#endif
Simon Glasse895a4b2014-10-23 18:58:47 -0600366int ft_board_setup(void *blob, bd_t *bd)
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000367{
368 phys_addr_t base;
369 phys_size_t size;
370
371 ft_cpu_setup(blob, bd);
372
373 base = getenv_bootm_low();
374 size = getenv_bootm_size();
375
376 #if defined(CONFIG_PCI)
377 FT_FSL_PCI_SETUP;
378 #endif
379
380 fdt_fixup_memory(blob, (u64)base, (u64)size);
Ashish Kumar42a9e2f2014-10-06 18:24:56 +0530381#ifdef CONFIG_FDT_FIXUP_PARTITIONS
382 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
383#endif
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000384
385 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
386 u32 porbmsr = in_be32(&gur->porbmsr);
Andy Fleming8bd00c92013-06-20 14:54:33 -0500387 u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf;
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000388
389 if (!(hwconfig("uart2") && hwconfig("usb1"))) {
390 /* If uart2 is there in hwconfig remove usb node from
391 * device tree */
392
393 if (hwconfig("uart2")) {
394 /* remove dts usb node */
395 fdt_del_node_compat(blob, "fsl-usb2-dr");
396 } else {
397 fdt_fixup_dr_usb(blob, bd);
398 fdt_del_node_and_alias(blob, "serial2");
399 }
400 }
401
402 if (hwconfig("uart3")) {
403 if (romloc == PORBMSR_ROMLOC_NAND_2K ||
404 romloc == PORBMSR_ROMLOC_NOR ||
405 romloc == PORBMSR_ROMLOC_SDHC)
406 /* Delete SPI node from the device tree */
407 fdt_del_node_and_alias(blob, "spi1");
408 } else
409 fdt_del_node_and_alias(blob, "serial3");
410
411 if (hwconfig("sim")) {
412 if (romloc == PORBMSR_ROMLOC_NAND_2K ||
413 romloc == PORBMSR_ROMLOC_NOR ||
414 romloc == PORBMSR_ROMLOC_SPI) {
415
416 /* remove dts sdhc node */
417 fdt_del_node_compat(blob, "fsl,esdhc");
418 } else if (romloc == PORBMSR_ROMLOC_SDHC) {
419
420 /* remove dts sim node */
421 fdt_del_node_compat(blob, "fsl,sim-v1.0");
422 printf("SIM & SDHC can't work together on the board");
423 printf("\nRemove sim from hwconfig and reset\n");
424 }
425 }
Simon Glasse895a4b2014-10-23 18:58:47 -0600426
427 return 0;
Prabhakar Kushwaha41d91012013-01-14 18:26:57 +0000428}
429#endif