blob: c6f94aebba76dfa7376023020a50c100e4f32d8c [file] [log] [blame]
wdenk281e00a2004-08-01 22:48:16 +00001/*
2 * Copyright (C) 2003 ETC s.r.o.
3 *
4 * This code was inspired by Marius Groeger and Kyle Harris code
5 * available in other board ports for U-Boot
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 *
25 * Written by Peter Figuli <peposh@etc.sk>, 2003.
26 *
27 */
28
29#include <common.h>
30#include "intel.h"
31
32
33/*
34 * This code should handle CFI FLASH memory device. This code is very
35 * minimalistic approach without many essential error handling code as well.
36 * Because U-Boot actually is missing smart handling of FLASH device,
37 * we just set flash_id to anything else to FLASH_UNKNOW, so common code
38 * can call us without any restrictions.
39 * TODO: Add CFI Query, to be able to determine FLASH device.
40 * TODO: Add error handling code
41 * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
42 * hopefully may work with other configurations.
43 */
44
45#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
46# define FLASH_BUS vu_char
Jean-Christophe PLAGNIOL-VILLARDdb695b72008-03-09 10:44:01 +010047# define FLASH_BUS_RET u_char
wdenk281e00a2004-08-01 22:48:16 +000048# if ( SCB9328_FLASH_INTERLEAVE == 1 )
49# define FLASH_CMD( x ) x
50# else
51# error "With 8bit bus only one chip is allowed"
52# endif
53
54
55#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
56# define FLASH_BUS vu_short
Jean-Christophe PLAGNIOL-VILLARDdb695b72008-03-09 10:44:01 +010057# define FLASH_BUS_RET u_short
wdenk281e00a2004-08-01 22:48:16 +000058# if ( SCB9328_FLASH_INTERLEAVE == 1 )
59# define FLASH_CMD( x ) x
60# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
61# define FLASH_CMD( x ) (( x << 8 )| x )
62# else
63# error "With 16bit bus only 1 or 2 chip(s) are allowed"
64# endif
65
66
67#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
68# define FLASH_BUS vu_long
Jean-Christophe PLAGNIOL-VILLARDdb695b72008-03-09 10:44:01 +010069# define FLASH_BUS_RET u_long
wdenk281e00a2004-08-01 22:48:16 +000070# if ( SCB9328_FLASH_INTERLEAVE == 1 )
71# define FLASH_CMD( x ) x
72# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
73# define FLASH_CMD( x ) (( x << 16 )| x )
74# elif ( SCB9328_FLASH_INTERLEAVE == 4 )
75# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
76# else
77# error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
78# endif
79
80#else
81# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
82#endif
83
84
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020085flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
wdenk281e00a2004-08-01 22:48:16 +000086
Jean-Christophe PLAGNIOL-VILLARDdb695b72008-03-09 10:44:01 +010087static FLASH_BUS_RET flash_status_reg (void)
wdenk281e00a2004-08-01 22:48:16 +000088{
89
90 FLASH_BUS *addr = (FLASH_BUS *) 0;
91
92 *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
93
94 return *addr;
95}
96
97static int flash_ready (ulong timeout)
98{
99 int ok = 1;
100
101 reset_timer_masked ();
102 while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
103 FLASH_CMD (CFI_INTEL_SR_READY)) {
104 if (get_timer_masked () > timeout && timeout != 0) {
105 ok = 0;
106 break;
107 }
108 }
109 return ok;
110}
111
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200112#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 )
wdenk281e00a2004-08-01 22:48:16 +0000113# error "SCB9328 platform has only one flash bank!"
114#endif
115
116
117ulong flash_init (void)
118{
119 int i;
120 unsigned long address = SCB9328_FLASH_BASE;
121
122 flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200123 flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
wdenk281e00a2004-08-01 22:48:16 +0000124 flash_info[0].flash_id = INTEL_MANUFACT;
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200125 memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
wdenk281e00a2004-08-01 22:48:16 +0000126
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127 for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) {
wdenk281e00a2004-08-01 22:48:16 +0000128 flash_info[0].start[i] = address;
129#ifdef SCB9328_FLASH_UNLOCK
130 /* Some devices are hw locked after start. */
131 *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
132 *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
133 flash_ready (0);
134 *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
135#endif
136 address += SCB9328_FLASH_SECT_SIZE;
137 }
138
139 flash_protect (FLAG_PROTECT_SET,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200140 CONFIG_SYS_FLASH_BASE,
141 CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
wdenk281e00a2004-08-01 22:48:16 +0000142 &flash_info[0]);
143
144 flash_protect (FLAG_PROTECT_SET,
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200145 CONFIG_ENV_ADDR,
146 CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
wdenk281e00a2004-08-01 22:48:16 +0000147
148 return SCB9328_FLASH_BANK_SIZE;
149}
150
151void flash_print_info (flash_info_t * info)
152{
153 int i;
154
155 printf (" Intel vendor\n");
156 printf (" Size: %ld MB in %d Sectors\n",
157 info->size >> 20, info->sector_count);
158
159 printf (" Sector Start Addresses:");
160 for (i = 0; i < info->sector_count; i++) {
161 if (!(i % 5)) {
162 printf ("\n");
163 }
164
165 printf (" %08lX%s", info->start[i],
166 info->protect[i] ? " (RO)" : " ");
167 }
168 printf ("\n");
169}
170
171
172int flash_erase (flash_info_t * info, int s_first, int s_last)
173{
174 int flag, non_protected = 0, sector;
175 int rc = ERR_OK;
176
177 FLASH_BUS *address;
178
179 for (sector = s_first; sector <= s_last; sector++) {
180 if (!info->protect[sector]) {
181 non_protected++;
182 }
183 }
184
185 if (!non_protected) {
186 return ERR_PROTECTED;
187 }
188
189 /*
190 * Disable interrupts which might cause a timeout
191 * here. Remember that our exception vectors are
192 * at address 0 in the flash, and we don't want a
193 * (ticker) exception to happen while the flash
194 * chip is in programming mode.
195 */
196 flag = disable_interrupts ();
197
198
199 /* Start erase on unprotected sectors */
200 for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
201 if (info->protect[sector]) {
202 printf ("Protected sector %2d skipping...\n", sector);
203 continue;
204 } else {
205 printf ("Erasing sector %2d ... ", sector);
206 }
207
208 address = (FLASH_BUS *) (info->start[sector]);
209
210 *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
211 *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200212 if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) {
wdenk281e00a2004-08-01 22:48:16 +0000213 *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
214 printf ("ok.\n");
215 } else {
216 *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
217 rc = ERR_TIMOUT;
218 printf ("timeout! Aborting...\n");
219 break;
220 }
221 *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
222 }
223 if (ctrlc ())
224 printf ("User Interrupt!\n");
225
226 /* allow flash to settle - wait 10 ms */
227 udelay_masked (10000);
228 if (flag) {
229 enable_interrupts ();
230 }
231
232 return rc;
233}
234
235static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
236{
237 FLASH_BUS *address = (FLASH_BUS *) dest;
238 int rc = ERR_OK;
239 int flag;
240
241 /* Check if Flash is (sufficiently) erased */
242 if ((*address & data) != data) {
243 return ERR_NOT_ERASED;
244 }
245
246 /*
247 * Disable interrupts which might cause a timeout
248 * here. Remember that our exception vectors are
249 * at address 0 in the flash, and we don't want a
250 * (ticker) exception to happen while the flash
251 * chip is in programming mode.
252 */
253
254 flag = disable_interrupts ();
255
256 *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
257 *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
258 *address = data;
259
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200260 if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) {
wdenk281e00a2004-08-01 22:48:16 +0000261 *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
262 rc = ERR_TIMOUT;
263 printf ("timeout! Aborting...\n");
264 }
265
266 *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
267 if (flag) {
268 enable_interrupts ();
269 }
270
271 return rc;
272}
273
274int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
275{
276 ulong read_addr, write_addr;
277 FLASH_BUS data;
278 int i, result = ERR_OK;
279
280
281 read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
282 write_addr = read_addr;
283 if (read_addr != addr) {
284 data = 0;
285 for (i = 0; i < sizeof (FLASH_BUS); i++) {
286 if (read_addr < addr || cnt == 0) {
287 data |= *((uchar *) read_addr) << i * 8;
288 } else {
289 data |= (*src++) << i * 8;
290 cnt--;
291 }
292 read_addr++;
293 }
294 if ((result = write_data (info, write_addr, data)) != ERR_OK) {
295 return result;
296 }
297 write_addr += sizeof (FLASH_BUS);
298 }
299 for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
300 if ((result = write_data (info, write_addr,
301 *((FLASH_BUS *) src))) != ERR_OK) {
302 return result;
303 }
304 write_addr += sizeof (FLASH_BUS);
305 src += sizeof (FLASH_BUS);
306 }
307 if (cnt > 0) {
308 read_addr = write_addr;
309 data = 0;
310 for (i = 0; i < sizeof (FLASH_BUS); i++) {
311 if (cnt > 0) {
312 data |= (*src++) << i * 8;
313 cnt--;
314 } else {
315 data |= *((uchar *) read_addr) << i * 8;
316 }
317 read_addr++;
318 }
319 if ((result = write_data (info, write_addr, data)) != 0) {
320 return result;
321 }
322 }
323 return ERR_OK;
324}