Andy Fleming | 9082eea | 2011-04-07 21:56:05 -0500 | [diff] [blame^] | 1 | /* |
| 2 | * Vitesse PHY drivers |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or |
| 5 | * modify it under the terms of the GNU General Public License as |
| 6 | * published by the Free Software Foundation; either version 2 of |
| 7 | * the License, or (at your option) any later version. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | * |
| 14 | * You should have received a copy of the GNU General Public License |
| 15 | * along with this program; if not, write to the Free Software |
| 16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 17 | * MA 02111-1307 USA |
| 18 | * |
| 19 | * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| 20 | * author Andy Fleming |
| 21 | * |
| 22 | */ |
| 23 | #include <miiphy.h> |
| 24 | |
| 25 | /* Cicada Auxiliary Control/Status Register */ |
| 26 | #define MIIM_CIS82xx_AUX_CONSTAT 0x1c |
| 27 | #define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004 |
| 28 | #define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020 |
| 29 | #define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018 |
| 30 | #define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010 |
| 31 | #define MIIM_CIS82xx_AUXCONSTAT_100 0x0008 |
| 32 | |
| 33 | /* Cicada Extended Control Register 1 */ |
| 34 | #define MIIM_CIS82xx_EXT_CON1 0x17 |
| 35 | #define MIIM_CIS8201_EXTCON1_INIT 0x0000 |
| 36 | |
| 37 | /* Cicada 8204 Extended PHY Control Register 1 */ |
| 38 | #define MIIM_CIS8204_EPHY_CON 0x17 |
| 39 | #define MIIM_CIS8204_EPHYCON_INIT 0x0006 |
| 40 | #define MIIM_CIS8204_EPHYCON_RGMII 0x1100 |
| 41 | |
| 42 | /* Cicada 8204 Serial LED Control Register */ |
| 43 | #define MIIM_CIS8204_SLED_CON 0x1b |
| 44 | #define MIIM_CIS8204_SLEDCON_INIT 0x1115 |
| 45 | |
| 46 | /* Vitesse VSC8601 Extended PHY Control Register 1 */ |
| 47 | #define MIIM_VSC8601_EPHY_CON 0x17 |
| 48 | #define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 |
| 49 | #define MIIM_VSC8601_SKEW_CTRL 0x1c |
| 50 | |
| 51 | #define PHY_EXT_PAGE_ACCESS 0x1f |
| 52 | |
| 53 | /* CIS8201 */ |
| 54 | static int vitesse_config(struct phy_device *phydev) |
| 55 | { |
| 56 | /* Override PHY config settings */ |
| 57 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT, |
| 58 | MIIM_CIS82xx_AUXCONSTAT_INIT); |
| 59 | /* Set up the interface mode */ |
| 60 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1, |
| 61 | MIIM_CIS8201_EXTCON1_INIT); |
| 62 | |
| 63 | genphy_config_aneg(phydev); |
| 64 | |
| 65 | return 0; |
| 66 | } |
| 67 | |
| 68 | static int vitesse_parse_status(struct phy_device *phydev) |
| 69 | { |
| 70 | int speed; |
| 71 | int mii_reg; |
| 72 | |
| 73 | mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT); |
| 74 | |
| 75 | if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX) |
| 76 | phydev->duplex = DUPLEX_FULL; |
| 77 | else |
| 78 | phydev->duplex = DUPLEX_HALF; |
| 79 | |
| 80 | speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED; |
| 81 | switch (speed) { |
| 82 | case MIIM_CIS82xx_AUXCONSTAT_GBIT: |
| 83 | phydev->speed = SPEED_1000; |
| 84 | break; |
| 85 | case MIIM_CIS82xx_AUXCONSTAT_100: |
| 86 | phydev->speed = SPEED_100; |
| 87 | break; |
| 88 | default: |
| 89 | phydev->speed = SPEED_10; |
| 90 | break; |
| 91 | } |
| 92 | |
| 93 | return 0; |
| 94 | } |
| 95 | |
| 96 | static int vitesse_startup(struct phy_device *phydev) |
| 97 | { |
| 98 | genphy_update_link(phydev); |
| 99 | vitesse_parse_status(phydev); |
| 100 | |
| 101 | return 0; |
| 102 | } |
| 103 | |
| 104 | static int cis8204_config(struct phy_device *phydev) |
| 105 | { |
| 106 | /* Override PHY config settings */ |
| 107 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT, |
| 108 | MIIM_CIS82xx_AUXCONSTAT_INIT); |
| 109 | |
| 110 | genphy_config_aneg(phydev); |
| 111 | |
| 112 | if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| 113 | (phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| 114 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) || |
| 115 | (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)) |
| 116 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON, |
| 117 | MIIM_CIS8204_EPHYCON_INIT | |
| 118 | MIIM_CIS8204_EPHYCON_RGMII); |
| 119 | else |
| 120 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON, |
| 121 | MIIM_CIS8204_EPHYCON_INIT); |
| 122 | |
| 123 | return 0; |
| 124 | } |
| 125 | |
| 126 | /* Vitesse VSC8601 */ |
| 127 | int vsc8601_config(struct phy_device *phydev) |
| 128 | { |
| 129 | /* Configure some basic stuff */ |
| 130 | #ifdef CONFIG_SYS_VSC8601_SKEWFIX |
| 131 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON, |
| 132 | MIIM_VSC8601_EPHY_CON_INIT_SKEW); |
| 133 | #if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX) |
| 134 | phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1); |
| 135 | #define VSC8101_SKEW \ |
| 136 | ((CONFIG_SYS_VSC8601_SKEW_TX << 14) \ |
| 137 | | (CONFIG_SYS_VSC8601_SKEW_RX << 12)) |
| 138 | phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL, |
| 139 | VSC8101_SKEW); |
| 140 | phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); |
| 141 | #endif |
| 142 | #endif |
| 143 | |
| 144 | genphy_config_aneg(phydev); |
| 145 | |
| 146 | return 0; |
| 147 | } |
| 148 | |
| 149 | static struct phy_driver VSC8211_driver = { |
| 150 | .name = "Vitesse VSC8211", |
| 151 | .uid = 0xfc4b0, |
| 152 | .mask = 0xffff0, |
| 153 | .features = PHY_GBIT_FEATURES, |
| 154 | .config = &vitesse_config, |
| 155 | .startup = &vitesse_startup, |
| 156 | .shutdown = &genphy_shutdown, |
| 157 | }; |
| 158 | |
| 159 | static struct phy_driver VSC8221_driver = { |
| 160 | .name = "Vitesse VSC8221", |
| 161 | .uid = 0xfc550, |
| 162 | .mask = 0xffff0, |
| 163 | .features = PHY_GBIT_FEATURES, |
| 164 | .config = &genphy_config_aneg, |
| 165 | .startup = &vitesse_startup, |
| 166 | .shutdown = &genphy_shutdown, |
| 167 | }; |
| 168 | |
| 169 | static struct phy_driver VSC8244_driver = { |
| 170 | .name = "Vitesse VSC8244", |
| 171 | .uid = 0xfc6c0, |
| 172 | .mask = 0xffff0, |
| 173 | .features = PHY_GBIT_FEATURES, |
| 174 | .config = &genphy_config_aneg, |
| 175 | .startup = &vitesse_startup, |
| 176 | .shutdown = &genphy_shutdown, |
| 177 | }; |
| 178 | |
| 179 | static struct phy_driver VSC8234_driver = { |
| 180 | .name = "Vitesse VSC8234", |
| 181 | .uid = 0xfc620, |
| 182 | .mask = 0xffff0, |
| 183 | .features = PHY_GBIT_FEATURES, |
| 184 | .config = &genphy_config_aneg, |
| 185 | .startup = &vitesse_startup, |
| 186 | .shutdown = &genphy_shutdown, |
| 187 | }; |
| 188 | |
| 189 | static struct phy_driver VSC8601_driver = { |
| 190 | .name = "Vitesse VSC8601", |
| 191 | .uid = 0x70420, |
| 192 | .mask = 0xffff0, |
| 193 | .features = PHY_GBIT_FEATURES, |
| 194 | .config = &vsc8601_config, |
| 195 | .startup = &vitesse_startup, |
| 196 | .shutdown = &genphy_shutdown, |
| 197 | }; |
| 198 | |
| 199 | static struct phy_driver VSC8641_driver = { |
| 200 | .name = "Vitesse VSC8641", |
| 201 | .uid = 0x70430, |
| 202 | .mask = 0xffff0, |
| 203 | .features = PHY_GBIT_FEATURES, |
| 204 | .config = &genphy_config_aneg, |
| 205 | .startup = &vitesse_startup, |
| 206 | .shutdown = &genphy_shutdown, |
| 207 | }; |
| 208 | |
| 209 | /* Vitesse bought Cicada, so we'll put these here */ |
| 210 | static struct phy_driver cis8201_driver = { |
| 211 | .name = "CIS8201", |
| 212 | .uid = 0xfc410, |
| 213 | .mask = 0xffff0, |
| 214 | .features = PHY_GBIT_FEATURES, |
| 215 | .config = &vitesse_config, |
| 216 | .startup = &vitesse_startup, |
| 217 | .shutdown = &genphy_shutdown, |
| 218 | }; |
| 219 | |
| 220 | static struct phy_driver cis8204_driver = { |
| 221 | .name = "Cicada Cis8204", |
| 222 | .uid = 0xfc440, |
| 223 | .mask = 0xffff0, |
| 224 | .features = PHY_GBIT_FEATURES, |
| 225 | .config = &cis8204_config, |
| 226 | .startup = &vitesse_startup, |
| 227 | .shutdown = &genphy_shutdown, |
| 228 | }; |
| 229 | |
| 230 | int phy_vitesse_init(void) |
| 231 | { |
| 232 | phy_register(&VSC8641_driver); |
| 233 | phy_register(&VSC8601_driver); |
| 234 | phy_register(&VSC8234_driver); |
| 235 | phy_register(&VSC8244_driver); |
| 236 | phy_register(&VSC8211_driver); |
| 237 | phy_register(&VSC8221_driver); |
| 238 | phy_register(&cis8201_driver); |
| 239 | phy_register(&cis8204_driver); |
| 240 | |
| 241 | return 0; |
| 242 | } |