blob: af9daad32072db7077ae8b02a1567fce6d63034e [file] [log] [blame]
rev13@wp.pled09a552015-03-01 12:44:42 +01001/*
2 * (C) Copyright 2015
Kamil Lulko66562412015-12-01 09:08:19 +01003 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pled09a552015-03-01 12:44:42 +01004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
rev13@wp.pled09a552015-03-01 12:44:42 +010011#define CONFIG_STM32F4DISCOVERY
rev13@wp.pled09a552015-03-01 12:44:42 +010012
Antonio Borneo089fddf2015-07-19 22:19:46 +080013#define CONFIG_MISC_INIT_R
rev13@wp.pled09a552015-03-01 12:44:42 +010014
15#define CONFIG_SYS_FLASH_BASE 0x08000000
16
17#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
18#define CONFIG_SYS_TEXT_BASE 0x08000000
19
20#define CONFIG_SYS_ICACHE_OFF
21#define CONFIG_SYS_DCACHE_OFF
22
23/*
24 * Configuration of the external SDRAM memory
25 */
26#define CONFIG_NR_DRAM_BANKS 1
rev13@wp.pled09a552015-03-01 12:44:42 +010027#define CONFIG_SYS_RAM_CS 1
28#define CONFIG_SYS_RAM_FREQ_DIV 2
29#define CONFIG_SYS_RAM_BASE 0xD0000000
30#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
31#define CONFIG_SYS_LOAD_ADDR 0xD0400000
32#define CONFIG_LOADADDR 0xD0400000
33
34#define CONFIG_SYS_MAX_FLASH_SECT 12
35#define CONFIG_SYS_MAX_FLASH_BANKS 2
36
rev13@wp.pled09a552015-03-01 12:44:42 +010037#define CONFIG_ENV_OFFSET (256 << 10)
38#define CONFIG_ENV_SECT_SIZE (128 << 10)
39#define CONFIG_ENV_SIZE (8 << 10)
40
rev13@wp.pled09a552015-03-01 12:44:42 +010041#define CONFIG_RED_LED 110
42#define CONFIG_GREEN_LED 109
43
Vikas Manocha9ecb0c42016-03-09 15:18:13 -080044#define CONFIG_STM32_FLASH
rev13@wp.pled09a552015-03-01 12:44:42 +010045
Antonio Borneof9fa4a22015-07-19 22:19:48 +080046#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
47
rev13@wp.pled09a552015-03-01 12:44:42 +010048#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
49
50#define CONFIG_CMDLINE_TAG
51#define CONFIG_SETUP_MEMORY_TAGS
52#define CONFIG_INITRD_TAG
53#define CONFIG_REVISION_TAG
54
55#define CONFIG_SYS_CBSIZE 1024
rev13@wp.pled09a552015-03-01 12:44:42 +010056
rev13@wp.pled09a552015-03-01 12:44:42 +010057#define CONFIG_SYS_MALLOC_LEN (2 << 20)
58
rev13@wp.pled09a552015-03-01 12:44:42 +010059#define CONFIG_BOOTCOMMAND \
60 "run bootcmd_romfs"
61
62#define CONFIG_EXTRA_ENV_SETTINGS \
63 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
64 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
65 "bootm 0x08044000 - 0x08042000\0"
66
rev13@wp.pled09a552015-03-01 12:44:42 +010067/*
68 * Command line configuration.
69 */
rev13@wp.pled09a552015-03-01 12:44:42 +010070#define CONFIG_SYS_LONGHELP
rev13@wp.pled09a552015-03-01 12:44:42 +010071#define CONFIG_AUTO_COMPLETE
72#define CONFIG_CMDLINE_EDITING
73
rev13@wp.pled09a552015-03-01 12:44:42 +010074#endif /* __CONFIG_H */