blob: 6cba892e78d990f9213f6f7f223fa529d901109b [file] [log] [blame]
wdenk7d393ae2002-10-25 21:08:05 +00001/*
2 * (C) Copyright 2001
3 * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 *
23 *
24 * TODO: clean-up
25 */
26
27#include <common.h>
28#include "pip405.h"
29#include <asm/processor.h>
30#include <i2c.h>
31#include "../common/isa.h"
32#include "../common/common_util.h"
33
Wolfgang Denkd87080b2006-03-31 18:32:53 +020034DECLARE_GLOBAL_DATA_PTR;
35
wdenk7d393ae2002-10-25 21:08:05 +000036#undef SDRAM_DEBUG
37
38#define FALSE 0
39#define TRUE 1
40
41/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
42#ifndef __ldiv_t_defined
43typedef struct {
44 long int quot; /* Quotient */
45 long int rem; /* Remainder */
46} ldiv_t;
47extern ldiv_t ldiv (long int __numer, long int __denom);
48
49# define __ldiv_t_defined 1
50#endif
51
52
53typedef enum {
54 SDRAM_NO_ERR,
55 SDRAM_SPD_COMM_ERR,
56 SDRAM_SPD_CHKSUM_ERR,
57 SDRAM_UNSUPPORTED_ERR,
58 SDRAM_UNKNOWN_ERR
59} SDRAM_ERR;
60
61typedef struct {
62 const unsigned char mode;
63 const unsigned char row;
64 const unsigned char col;
65 const unsigned char bank;
66} SDRAM_SETUP;
67
68static const SDRAM_SETUP sdram_setup_table[] = {
69 {1, 11, 9, 2},
70 {1, 11, 10, 2},
71 {2, 12, 9, 4},
72 {2, 12, 10, 4},
73 {3, 13, 9, 4},
74 {3, 13, 10, 4},
75 {3, 13, 11, 4},
76 {4, 12, 8, 2},
77 {4, 12, 8, 4},
78 {5, 11, 8, 2},
79 {5, 11, 8, 4},
80 {6, 13, 8, 2},
81 {6, 13, 8, 4},
82 {7, 13, 9, 2},
83 {7, 13, 10, 2},
84 {0, 0, 0, 0}
85};
86
87static const unsigned char cal_indextable[] = {
88 9, 23, 25
89};
90
91
92/*
93 * translate ns.ns/10 coding of SPD timing values
94 * into 10 ps unit values
95 */
96
97unsigned short NS10to10PS (unsigned char spd_byte, unsigned char spd_version)
98{
99 unsigned short ns, ns10;
100
101 /* isolate upper nibble */
102 ns = (spd_byte >> 4) & 0x0F;
103 /* isolate lower nibble */
104 ns10 = (spd_byte & 0x0F);
105
106 return (ns * 100 + ns10 * 10);
107}
108
109/*
110 * translate ns.ns/4 coding of SPD timing values
111 * into 10 ps unit values
112 */
113
114unsigned short NS4to10PS (unsigned char spd_byte, unsigned char spd_version)
115{
116 unsigned short ns, ns4;
117
118 /* isolate upper 6 bits */
119 ns = (spd_byte >> 2) & 0x3F;
120 /* isloate lower 2 bits */
121 ns4 = (spd_byte & 0x03);
122
123 return (ns * 100 + ns4 * 25);
124}
125
126/*
127 * translate ns coding of SPD timing values
128 * into 10 ps unit values
129 */
130
131unsigned short NSto10PS (unsigned char spd_byte)
132{
133 return (spd_byte * 100);
134}
135
136void SDRAM_err (const char *s)
137{
138#ifndef SDRAM_DEBUG
wdenk7d393ae2002-10-25 21:08:05 +0000139 (void) get_clocks ();
140 gd->baudrate = 9600;
141 serial_init ();
142#endif
143 serial_puts ("\n");
144 serial_puts (s);
145 serial_puts ("\n enable SDRAM_DEBUG for more info\n");
146 for (;;);
147}
148
149
150#ifdef SDRAM_DEBUG
151
152void write_hex (unsigned char i)
153{
154 char cc;
155
156 cc = i >> 4;
157 cc &= 0xf;
158 if (cc > 9)
159 serial_putc (cc + 55);
160 else
161 serial_putc (cc + 48);
162 cc = i & 0xf;
163 if (cc > 9)
164 serial_putc (cc + 55);
165 else
166 serial_putc (cc + 48);
167}
168
169void write_4hex (unsigned long val)
170{
171 write_hex ((unsigned char) (val >> 24));
172 write_hex ((unsigned char) (val >> 16));
173 write_hex ((unsigned char) (val >> 8));
174 write_hex ((unsigned char) val);
175}
176
177#endif
178
wdenkc837dcb2004-01-20 23:12:12 +0000179int board_early_init_f (void)
wdenk7d393ae2002-10-25 21:08:05 +0000180{
181 unsigned char dataout[1];
182 unsigned char datain[128];
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200183 unsigned long sdram_size = 0;
wdenk7d393ae2002-10-25 21:08:05 +0000184 SDRAM_SETUP *t = (SDRAM_SETUP *) sdram_setup_table;
185 unsigned long memclk;
186 unsigned long tmemclk = 0;
187 unsigned long tmp, bank, baseaddr, bank_size;
188 unsigned short i;
189 unsigned char rows, cols, banks, sdram_banks, density;
190 unsigned char supported_cal, trp_clocks, trcd_clocks, tras_clocks,
191 trc_clocks, tctp_clocks;
192 unsigned char cal_index, cal_val, spd_version, spd_chksum;
193 unsigned char buf[8];
wdenk7205e402003-09-10 22:30:53 +0000194 /* set up the config port */
195 mtdcr (ebccfga, pb7ap);
196 mtdcr (ebccfgd, CONFIG_PORT_AP);
197 mtdcr (ebccfga, pb7cr);
198 mtdcr (ebccfgd, CONFIG_PORT_CR);
wdenk7d393ae2002-10-25 21:08:05 +0000199
200 memclk = get_bus_freq (tmemclk);
201 tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */
202
203#ifdef SDRAM_DEBUG
204 (void) get_clocks ();
205 gd->baudrate = 9600;
206 serial_init ();
207 serial_puts ("\nstart SDRAM Setup\n");
208#endif
209
210 /* Read Serial Presence Detect Information */
211 i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
212 dataout[0] = 0;
213 for (i = 0; i < 128; i++)
214 datain[i] = 127;
215 i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128);
216#ifdef SDRAM_DEBUG
217 serial_puts ("\ni2c_read returns ");
218 write_hex (i);
219 serial_puts ("\n");
220#endif
221
222#ifdef SDRAM_DEBUG
223 for (i = 0; i < 128; i++) {
224 write_hex (datain[i]);
225 serial_puts (" ");
226 if (((i + 1) % 16) == 0)
227 serial_puts ("\n");
228 }
229 serial_puts ("\n");
230#endif
231 spd_chksum = 0;
232 for (i = 0; i < 63; i++) {
233 spd_chksum += datain[i];
234 } /* endfor */
235 if (datain[63] != spd_chksum) {
236#ifdef SDRAM_DEBUG
237 serial_puts ("SPD chksum: 0x");
238 write_hex (datain[63]);
239 serial_puts (" != calc. chksum: 0x");
240 write_hex (spd_chksum);
241 serial_puts ("\n");
242#endif
243 SDRAM_err ("SPD checksum Error");
244 }
245 /* SPD seems to be ok, use it */
246
247 /* get SPD version */
248 spd_version = datain[62];
249
250 /* do some sanity checks on the kind of RAM */
251 if ((datain[0] < 0x80) || /* less than 128 valid bytes in SPD */
252 (datain[2] != 0x04) || /* if not SDRAM */
253 (!((datain[6] == 0x40) || (datain[6] == 0x48))) || /* or not (64 Bit or 72 Bit) */
254 (datain[7] != 0x00) || (datain[8] != 0x01) || /* or not LVTTL signal levels */
255 (datain[126] == 0x66)) /* or a 66Mhz modules */
256 SDRAM_err ("unsupported SDRAM");
257#ifdef SDRAM_DEBUG
258 serial_puts ("SDRAM sanity ok\n");
259#endif
260
261 /* get number of rows/cols/banks out of byte 3+4+5 */
262 rows = datain[3];
263 cols = datain[4];
264 banks = datain[5];
265
266 /* get number of SDRAM banks out of byte 17 and
267 supported CAS latencies out of byte 18 */
268 sdram_banks = datain[17];
269 supported_cal = datain[18] & ~0x81;
270
271 while (t->mode != 0) {
272 if ((t->row == rows) && (t->col == cols)
273 && (t->bank == sdram_banks))
274 break;
275 t++;
276 } /* endwhile */
277
278#ifdef SDRAM_DEBUG
279 serial_puts ("rows: ");
280 write_hex (rows);
281 serial_puts (" cols: ");
282 write_hex (cols);
283 serial_puts (" banks: ");
284 write_hex (banks);
285 serial_puts (" mode: ");
286 write_hex (t->mode);
287 serial_puts ("\n");
288#endif
289 if (t->mode == 0)
290 SDRAM_err ("unsupported SDRAM");
291 /* get tRP, tRCD, tRAS and density from byte 27+29+30+31 */
292#ifdef SDRAM_DEBUG
293 serial_puts ("tRP: ");
294 write_hex (datain[27]);
295 serial_puts ("\ntRCD: ");
296 write_hex (datain[29]);
297 serial_puts ("\ntRAS: ");
298 write_hex (datain[30]);
299 serial_puts ("\n");
300#endif
301
302 trp_clocks = (NSto10PS (datain[27]) + (tmemclk - 1)) / tmemclk;
303 trcd_clocks = (NSto10PS (datain[29]) + (tmemclk - 1)) / tmemclk;
304 tras_clocks = (NSto10PS (datain[30]) + (tmemclk - 1)) / tmemclk;
305 density = datain[31];
306
307 /* trc_clocks is sum of trp_clocks + tras_clocks */
308 trc_clocks = trp_clocks + tras_clocks;
309 /* ctp = ((trp + tras) - trp - trcd) => tras - trcd */
310 tctp_clocks =
311 ((NSto10PS (datain[30]) - NSto10PS (datain[29])) +
312 (tmemclk - 1)) / tmemclk;
313
314#ifdef SDRAM_DEBUG
315 serial_puts ("c_RP: ");
316 write_hex (trp_clocks);
317 serial_puts ("\nc_RCD: ");
318 write_hex (trcd_clocks);
319 serial_puts ("\nc_RAS: ");
320 write_hex (tras_clocks);
321 serial_puts ("\nc_RC: (RP+RAS): ");
322 write_hex (trc_clocks);
323 serial_puts ("\nc_CTP: ((RP+RAS)-RP-RCD): ");
324 write_hex (tctp_clocks);
325 serial_puts ("\nt_CTP: RAS - RCD: ");
326 write_hex ((unsigned
327 char) ((NSto10PS (datain[30]) -
328 NSto10PS (datain[29])) >> 8));
329 write_hex ((unsigned char) (NSto10PS (datain[30]) - NSto10PS (datain[29])));
330 serial_puts ("\ntmemclk: ");
331 write_hex ((unsigned char) (tmemclk >> 8));
332 write_hex ((unsigned char) (tmemclk));
333 serial_puts ("\n");
334#endif
335
336
337 cal_val = 255;
338 for (i = 6, cal_index = 0; (i > 0) && (cal_index < 3); i--) {
339 /* is this CAS latency supported ? */
340 if ((supported_cal >> i) & 0x01) {
341 buf[0] = datain[cal_indextable[cal_index]];
342 if (cal_index < 2) {
343 if (NS10to10PS (buf[0], spd_version) <= tmemclk)
344 cal_val = i;
345 } else {
346 /* SPD bytes 25+26 have another format */
347 if (NS4to10PS (buf[0], spd_version) <= tmemclk)
348 cal_val = i;
349 } /* endif */
350 cal_index++;
351 } /* endif */
352 } /* endfor */
353#ifdef SDRAM_DEBUG
354 serial_puts ("CAL: ");
355 write_hex (cal_val + 1);
356 serial_puts ("\n");
357#endif
358
359 if (cal_val == 255)
360 SDRAM_err ("unsupported SDRAM");
361
362 /* get SDRAM timing register */
363 mtdcr (memcfga, mem_sdtr1);
364 tmp = mfdcr (memcfgd) & ~0x018FC01F;
365 /* insert CASL value */
366/* tmp |= ((unsigned long)cal_val) << 23; */
367 tmp |= ((unsigned long) cal_val) << 23;
368 /* insert PTA value */
369 tmp |= ((unsigned long) (trp_clocks - 1)) << 18;
370 /* insert CTP value */
371/* tmp |= ((unsigned long)(trc_clocks - trp_clocks - trcd_clocks - 1)) << 16; */
372 tmp |= ((unsigned long) (trc_clocks - trp_clocks - trcd_clocks)) << 16;
373 /* insert LDF (always 01) */
374 tmp |= ((unsigned long) 0x01) << 14;
375 /* insert RFTA value */
376 tmp |= ((unsigned long) (trc_clocks - 4)) << 2;
377 /* insert RCD value */
378 tmp |= ((unsigned long) (trcd_clocks - 1)) << 0;
379
380#ifdef SDRAM_DEBUG
381 serial_puts ("sdtr: ");
382 write_4hex (tmp);
383 serial_puts ("\n");
384#endif
385
386 /* write SDRAM timing register */
387 mtdcr (memcfga, mem_sdtr1);
388 mtdcr (memcfgd, tmp);
389 baseaddr = CFG_SDRAM_BASE;
390 bank_size = (((unsigned long) density) << 22) / 2;
391 /* insert AM value */
392 tmp = ((unsigned long) t->mode - 1) << 13;
393 /* insert SZ value; */
394 switch (bank_size) {
395 case 0x00400000:
396 tmp |= ((unsigned long) 0x00) << 17;
397 break;
398 case 0x00800000:
399 tmp |= ((unsigned long) 0x01) << 17;
400 break;
401 case 0x01000000:
402 tmp |= ((unsigned long) 0x02) << 17;
403 break;
404 case 0x02000000:
405 tmp |= ((unsigned long) 0x03) << 17;
406 break;
407 case 0x04000000:
408 tmp |= ((unsigned long) 0x04) << 17;
409 break;
410 case 0x08000000:
411 tmp |= ((unsigned long) 0x05) << 17;
412 break;
413 case 0x10000000:
414 tmp |= ((unsigned long) 0x06) << 17;
415 break;
416 default:
417 SDRAM_err ("unsupported SDRAM");
418 } /* endswitch */
419 /* get SDRAM bank 0 register */
420 mtdcr (memcfga, mem_mb0cf);
421 bank = mfdcr (memcfgd) & ~0xFFCEE001;
422 bank |= (baseaddr | tmp | 0x01);
423#ifdef SDRAM_DEBUG
424 serial_puts ("bank0: baseaddr: ");
425 write_4hex (baseaddr);
426 serial_puts (" banksize: ");
427 write_4hex (bank_size);
428 serial_puts (" mb0cf: ");
429 write_4hex (bank);
430 serial_puts ("\n");
431#endif
432 baseaddr += bank_size;
433 sdram_size += bank_size;
434
435 /* write SDRAM bank 0 register */
436 mtdcr (memcfga, mem_mb0cf);
437 mtdcr (memcfgd, bank);
438
439 /* get SDRAM bank 1 register */
440 mtdcr (memcfga, mem_mb1cf);
441 bank = mfdcr (memcfgd) & ~0xFFCEE001;
442 sdram_size = 0;
443
444#ifdef SDRAM_DEBUG
445 serial_puts ("bank1: baseaddr: ");
446 write_4hex (baseaddr);
447 serial_puts (" banksize: ");
448 write_4hex (bank_size);
449#endif
450 if (banks == 2) {
451 bank |= (baseaddr | tmp | 0x01);
452 baseaddr += bank_size;
453 sdram_size += bank_size;
454 } /* endif */
455#ifdef SDRAM_DEBUG
456 serial_puts (" mb1cf: ");
457 write_4hex (bank);
458 serial_puts ("\n");
459#endif
460 /* write SDRAM bank 1 register */
461 mtdcr (memcfga, mem_mb1cf);
462 mtdcr (memcfgd, bank);
463
464 /* get SDRAM bank 2 register */
465 mtdcr (memcfga, mem_mb2cf);
466 bank = mfdcr (memcfgd) & ~0xFFCEE001;
467
468 bank |= (baseaddr | tmp | 0x01);
469
470#ifdef SDRAM_DEBUG
471 serial_puts ("bank2: baseaddr: ");
472 write_4hex (baseaddr);
473 serial_puts (" banksize: ");
474 write_4hex (bank_size);
475 serial_puts (" mb2cf: ");
476 write_4hex (bank);
477 serial_puts ("\n");
478#endif
479
480 baseaddr += bank_size;
481 sdram_size += bank_size;
482
483 /* write SDRAM bank 2 register */
484 mtdcr (memcfga, mem_mb2cf);
485 mtdcr (memcfgd, bank);
486
487 /* get SDRAM bank 3 register */
488 mtdcr (memcfga, mem_mb3cf);
489 bank = mfdcr (memcfgd) & ~0xFFCEE001;
490
491#ifdef SDRAM_DEBUG
492 serial_puts ("bank3: baseaddr: ");
493 write_4hex (baseaddr);
494 serial_puts (" banksize: ");
495 write_4hex (bank_size);
496#endif
497
498 if (banks == 2) {
499 bank |= (baseaddr | tmp | 0x01);
500 baseaddr += bank_size;
501 sdram_size += bank_size;
502 }
503 /* endif */
504#ifdef SDRAM_DEBUG
505 serial_puts (" mb3cf: ");
506 write_4hex (bank);
507 serial_puts ("\n");
508#endif
509
510 /* write SDRAM bank 3 register */
511 mtdcr (memcfga, mem_mb3cf);
512 mtdcr (memcfgd, bank);
513
514
515 /* get SDRAM refresh interval register */
516 mtdcr (memcfga, mem_rtr);
517 tmp = mfdcr (memcfgd) & ~0x3FF80000;
518
519 if (tmemclk < NSto10PS (16))
520 tmp |= 0x05F00000;
521 else
522 tmp |= 0x03F80000;
523
524 /* write SDRAM refresh interval register */
525 mtdcr (memcfga, mem_rtr);
526 mtdcr (memcfgd, tmp);
527
528 /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
529 mtdcr (memcfga, mem_mcopt1);
530 tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80E00000;
531 mtdcr (memcfga, mem_mcopt1);
532 mtdcr (memcfgd, tmp);
533
534
wdenk7d393ae2002-10-25 21:08:05 +0000535 /*-------------------------------------------------------------------------+
536 | Interrupt controller setup for the PIP405 board.
537 | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
538 | IRQ 16 405GP internally generated; active low; level sensitive
539 | IRQ 17-24 RESERVED
540 | IRQ 25 (EXT IRQ 0) SouthBridg; active low; level sensitive
541 | IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive
542 | IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive
543 | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
544 | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
545 | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
546 | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
547 | Note for PIP405 board:
548 | An interrupt taken for the SouthBridge (IRQ 25) indicates that
549 | the Interrupt Controller in the South Bridge has caused the
550 | interrupt. The IC must be read to determine which device
551 | caused the interrupt.
552 |
553 +-------------------------------------------------------------------------*/
554 mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
555 mtdcr (uicer, 0x00000000); /* disable all ints */
556 mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */
557 mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
558 mtdcr (uictr, 0x10000000); /* set int trigger levels */
559 mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
560 mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
561
562 return 0;
563}
564
565
566/* ------------------------------------------------------------------------- */
567
568/*
569 * Check Board Identity:
570 */
571
572int checkboard (void)
573{
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200574 char s[50];
wdenk7d393ae2002-10-25 21:08:05 +0000575 unsigned char bc;
576 int i;
577 backup_t *b = (backup_t *) s;
578
579 puts ("Board: ");
580
Wolfgang Denk77ddac92005-10-13 16:45:02 +0200581 i = getenv_r ("serial#", (char *)s, 32);
582 if ((i == 0) || strncmp ((char *)s, "PIP405", 6)) {
wdenk7d393ae2002-10-25 21:08:05 +0000583 get_backup_values (b);
584 if (strncmp (b->signature, "MPL\0", 4) != 0) {
585 puts ("### No HW ID - assuming PIP405");
586 } else {
587 b->serial_name[6] = 0;
588 printf ("%s SN: %s", b->serial_name,
589 &b->serial_name[7]);
590 }
591 } else {
592 s[6] = 0;
593 printf ("%s SN: %s", s, &s[7]);
594 }
595 bc = in8 (CONFIG_PORT_ADDR);
596 printf (" Boot Config: 0x%x\n", bc);
597 return (0);
598}
599
600
601/* ------------------------------------------------------------------------- */
602/* ------------------------------------------------------------------------- */
603/*
604 initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
605 the necessary info for SDRAM controller configuration
606*/
607/* ------------------------------------------------------------------------- */
608/* ------------------------------------------------------------------------- */
609static int test_dram (unsigned long ramsize);
610
Becky Bruce9973e3c2008-06-09 16:03:40 -0500611phys_size_t initdram (int board_type)
wdenk7d393ae2002-10-25 21:08:05 +0000612{
wdenk7d393ae2002-10-25 21:08:05 +0000613 unsigned long bank_reg[4], tmp, bank_size;
614 int i, ds;
615 unsigned long TotalSize;
616
617 ds = 0;
618 /* since the DRAM controller is allready set up,
619 * calculate the size with the bank registers
620 */
621 mtdcr (memcfga, mem_mb0cf);
622 bank_reg[0] = mfdcr (memcfgd);
623 mtdcr (memcfga, mem_mb1cf);
624 bank_reg[1] = mfdcr (memcfgd);
625 mtdcr (memcfga, mem_mb2cf);
626 bank_reg[2] = mfdcr (memcfgd);
627 mtdcr (memcfga, mem_mb3cf);
628 bank_reg[3] = mfdcr (memcfgd);
629 TotalSize = 0;
630 for (i = 0; i < 4; i++) {
631 if ((bank_reg[i] & 0x1) == 0x1) {
632 tmp = (bank_reg[i] >> 17) & 0x7;
633 bank_size = 4 << tmp;
634 TotalSize += bank_size;
635 } else
636 ds = 1;
637 }
638 if (ds == 1)
639 printf ("single-sided DIMM ");
640 else
641 printf ("double-sided DIMM ");
642 test_dram (TotalSize * 1024 * 1024);
643 /* bank 2 (SDRAM Clock 2) is not usable if 133MHz SDRAM IF */
644 (void) get_clocks();
645 if (gd->cpu_clk > 220000000)
646 TotalSize /= 2;
647 return (TotalSize * 1024 * 1024);
648}
649
650/* ------------------------------------------------------------------------- */
651
652
653static int test_dram (unsigned long ramsize)
654{
655 /* not yet implemented */
656 return (1);
657}
658
659
wdenk7205e402003-09-10 22:30:53 +0000660extern flash_info_t flash_info[]; /* info for FLASH chips */
661
wdenk7d393ae2002-10-25 21:08:05 +0000662int misc_init_r (void)
663{
wdenk7205e402003-09-10 22:30:53 +0000664 /* adjust flash start and size as well as the offset */
665 gd->bd->bi_flashstart=0-flash_info[0].size;
666 gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
667 gd->bd->bi_flashoffset=0;
668
669 /* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
670 if (mfdcr(strap) & PSR_ROM_LOC)
671 mtspr(ccr0, (mfspr(ccr0) & ~0x80));
672
wdenk7d393ae2002-10-25 21:08:05 +0000673 return (0);
674}
675
676/***************************************************************************
677 * some helping routines
678 */
679
680int overwrite_console (void)
681{
682 return (in8 (CONFIG_PORT_ADDR) & 0x1); /* return TRUE if console should be overwritten */
683}
684
685
wdenk7d393ae2002-10-25 21:08:05 +0000686extern int isa_init (void);
687
688
689void print_pip405_rev (void)
690{
691 unsigned char part, vers, cfg;
692
693 part = in8 (PLD_PART_REG);
694 vers = in8 (PLD_VERS_REG);
695 cfg = in8 (PLD_BOARD_CFG_REG);
696 printf ("Rev: PIP405-%d Rev %c PLD%d %d PLD%d %d\n",
697 16 - ((cfg >> 4) & 0xf), (cfg & 0xf) + 'A', part & 0xf,
698 vers & 0xf, (part >> 4) & 0xf, (vers >> 4) & 0xf);
699}
700
701extern void check_env(void);
702
703
704int last_stage_init (void)
705{
706 print_pip405_rev ();
707 isa_init ();
708 show_stdio_dev ();
709 check_env();
710 return 0;
711}
712
713/************************************************************************
714* Print PIP405 Info
715************************************************************************/
716void print_pip405_info (void)
717{
718 unsigned char part, vers, cfg, ledu, sysman, flashcom, can, serpwr,
719 compwr, nicvga, scsirst;
720
721 part = in8 (PLD_PART_REG);
722 vers = in8 (PLD_VERS_REG);
723 cfg = in8 (PLD_BOARD_CFG_REG);
724 ledu = in8 (PLD_LED_USER_REG);
725 sysman = in8 (PLD_SYS_MAN_REG);
726 flashcom = in8 (PLD_FLASH_COM_REG);
727 can = in8 (PLD_CAN_REG);
728 serpwr = in8 (PLD_SER_PWR_REG);
729 compwr = in8 (PLD_COM_PWR_REG);
730 nicvga = in8 (PLD_NIC_VGA_REG);
731 scsirst = in8 (PLD_SCSI_RST_REG);
732 printf ("PLD Part %d version %d\n",
733 part & 0xf, vers & 0xf);
734 printf ("PLD Part %d version %d\n",
735 (part >> 4) & 0xf, (vers >> 4) & 0xf);
736 printf ("Board Revision %c\n", (cfg & 0xf) + 'A');
737 printf ("Population Options %d %d %d %d\n",
738 (cfg >> 4) & 0x1, (cfg >> 5) & 0x1,
739 (cfg >> 6) & 0x1, (cfg >> 7) & 0x1);
740 printf ("User LED0 %s User LED1 %s\n",
741 ((ledu & 0x1) == 0x1) ? "on" : "off",
742 ((ledu & 0x2) == 0x2) ? "on" : "off");
743 printf ("Additionally Options %d %d\n",
744 (ledu >> 2) & 0x1, (ledu >> 3) & 0x1);
745 printf ("User Config Switch %d %d %d %d\n",
746 (ledu >> 4) & 0x1, (ledu >> 5) & 0x1,
747 (ledu >> 6) & 0x1, (ledu >> 7) & 0x1);
748 switch (sysman & 0x3) {
749 case 0:
750 printf ("PCI Clocks are running\n");
751 break;
752 case 1:
753 printf ("PCI Clocks are stopped in POS State\n");
754 break;
755 case 2:
756 printf ("PCI Clocks are stopped when PCI_STP# is asserted\n");
757 break;
758 case 3:
759 printf ("PCI Clocks are stopped\n");
760 break;
761 }
762 switch ((sysman >> 2) & 0x3) {
763 case 0:
764 printf ("Main Clocks are running\n");
765 break;
766 case 1:
767 printf ("Main Clocks are stopped in POS State\n");
768 break;
769 case 2:
770 case 3:
771 printf ("PCI Clocks are stopped\n");
772 break;
773 }
774 printf ("INIT asserts %sINT2# (SMI)\n",
775 ((sysman & 0x10) == 0x10) ? "" : "not ");
776 printf ("INIT asserts %sINT1# (NMI)\n",
777 ((sysman & 0x20) == 0x20) ? "" : "not ");
778 printf ("INIT occured %d\n", (sysman >> 6) & 0x1);
779 printf ("SER1 is routed to %s\n",
780 ((flashcom & 0x1) == 0x1) ? "RS485" : "RS232");
781 printf ("COM2 is routed to %s\n",
782 ((flashcom & 0x2) == 0x2) ? "RS485" : "RS232");
783 printf ("RS485 is configured as %s duplex\n",
784 ((flashcom & 0x4) == 0x4) ? "full" : "half");
785 printf ("RS485 is connected to %s\n",
786 ((flashcom & 0x8) == 0x8) ? "COM1" : "COM2");
787 printf ("SER1 uses handshakes %s\n",
788 ((flashcom & 0x10) == 0x10) ? "DTR/DSR" : "RTS/CTS");
789 printf ("Bootflash is %swriteprotected\n",
790 ((flashcom & 0x20) == 0x20) ? "not " : "");
791 printf ("Bootflash VPP is %s\n",
792 ((flashcom & 0x40) == 0x40) ? "on" : "off");
793 printf ("Bootsector is %swriteprotected\n",
794 ((flashcom & 0x80) == 0x80) ? "not " : "");
795 switch ((can) & 0x3) {
796 case 0:
797 printf ("CAN Controller is on address 0x1000..0x10FF\n");
798 break;
799 case 1:
800 printf ("CAN Controller is on address 0x8000..0x80FF\n");
801 break;
802 case 2:
803 printf ("CAN Controller is on address 0xE000..0xE0FF\n");
804 break;
805 case 3:
806 printf ("CAN Controller is disabled\n");
807 break;
808 }
809 switch ((can >> 2) & 0x3) {
810 case 0:
811 printf ("CAN Controller Reset is ISA Reset\n");
812 break;
813 case 1:
814 printf ("CAN Controller Reset is ISA Reset and POS State\n");
815 break;
816 case 2:
817 case 3:
818 printf ("CAN Controller is in reset\n");
819 break;
820 }
821 if (((can >> 4) < 3) || ((can >> 4) == 8) || ((can >> 4) == 13))
822 printf ("CAN Interrupt is disabled\n");
823 else
824 printf ("CAN Interrupt is ISA INT%d\n", (can >> 4) & 0xf);
825 switch (serpwr & 0x3) {
826 case 0:
827 printf ("SER0 Drivers are enabled\n");
828 break;
829 case 1:
830 printf ("SER0 Drivers are disabled in the POS state\n");
831 break;
832 case 2:
833 case 3:
834 printf ("SER0 Drivers are disabled\n");
835 break;
836 }
837 switch ((serpwr >> 2) & 0x3) {
838 case 0:
839 printf ("SER1 Drivers are enabled\n");
840 break;
841 case 1:
842 printf ("SER1 Drivers are disabled in the POS state\n");
843 break;
844 case 2:
845 case 3:
846 printf ("SER1 Drivers are disabled\n");
847 break;
848 }
849 switch (compwr & 0x3) {
850 case 0:
851 printf ("COM1 Drivers are enabled\n");
852 break;
853 case 1:
854 printf ("COM1 Drivers are disabled in the POS state\n");
855 break;
856 case 2:
857 case 3:
858 printf ("COM1 Drivers are disabled\n");
859 break;
860 }
861 switch ((compwr >> 2) & 0x3) {
862 case 0:
863 printf ("COM2 Drivers are enabled\n");
864 break;
865 case 1:
866 printf ("COM2 Drivers are disabled in the POS state\n");
867 break;
868 case 2:
869 case 3:
870 printf ("COM2 Drivers are disabled\n");
871 break;
872 }
873 switch ((nicvga) & 0x3) {
874 case 0:
875 printf ("PHY is running\n");
876 break;
877 case 1:
878 printf ("PHY is in Power save mode in POS state\n");
879 break;
880 case 2:
881 case 3:
882 printf ("PHY is in Power save mode\n");
883 break;
884 }
885 switch ((nicvga >> 2) & 0x3) {
886 case 0:
887 printf ("VGA is running\n");
888 break;
889 case 1:
890 printf ("VGA is in Power save mode in POS state\n");
891 break;
892 case 2:
893 case 3:
894 printf ("VGA is in Power save mode\n");
895 break;
896 }
897 printf ("PHY is %sreseted\n", ((nicvga & 0x10) == 0x10) ? "" : "not ");
898 printf ("VGA is %sreseted\n", ((nicvga & 0x20) == 0x20) ? "" : "not ");
899 printf ("Reserved Configuration is %d %d\n", (nicvga >> 6) & 0x1,
900 (nicvga >> 7) & 0x1);
901 switch ((scsirst) & 0x3) {
902 case 0:
903 printf ("SCSI Controller is running\n");
904 break;
905 case 1:
906 printf ("SCSI Controller is in Power save mode in POS state\n");
907 break;
908 case 2:
909 case 3:
910 printf ("SCSI Controller is in Power save mode\n");
911 break;
912 }
913 printf ("SCSI termination is %s\n",
914 ((scsirst & 0x4) == 0x4) ? "disabled" : "enabled");
915 printf ("SCSI Controller is %sreseted\n",
916 ((scsirst & 0x10) == 0x10) ? "" : "not ");
917 printf ("IDE disks are %sreseted\n",
918 ((scsirst & 0x20) == 0x20) ? "" : "not ");
919 printf ("ISA Bus is %sreseted\n",
920 ((scsirst & 0x40) == 0x40) ? "" : "not ");
921 printf ("Super IO is %sreseted\n",
922 ((scsirst & 0x80) == 0x80) ? "" : "not ");
923}
924
925void user_led0 (unsigned char on)
926{
927 if (on == TRUE)
928 out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1));
929 else
930 out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe));
931}
932
933void user_led1 (unsigned char on)
934{
935 if (on == TRUE)
936 out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2));
937 else
938 out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd));
939}
940
941void ide_set_reset (int idereset)
942{
943 /* if reset = 1 IDE reset will be asserted */
944 unsigned char resreg;
945
946 resreg = in8 (PLD_SCSI_RST_REG);
947 if (idereset == 1)
948 resreg |= 0x20;
949 else {
950 udelay(10000);
951 resreg &= 0xdf;
952 }
953 out8 (PLD_SCSI_RST_REG, resreg);
954}