blob: 86fbec5ea2988c127c1ee4b4fa113b487ee4a8d9 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Thomas Chou8cbb0dd2010-04-21 08:40:59 +08002/*
3 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
4 * Scott McNutt <smcnutt@psyent.com>
5 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
Thomas Chou8cbb0dd2010-04-21 08:40:59 +08006 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11/*
12 * BOARD/CPU
13 */
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080014
15/*
16 * SERIAL
17 */
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080018
19/*
Thomas Chou6168dc62015-10-23 14:55:36 +080020 * CFI Flash
21 */
Thomas Chou6168dc62015-10-23 14:55:36 +080022#define CONFIG_FLASH_CFI_DRIVER
23#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
24#define CONFIG_SYS_FLASH_CFI
25#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
26#define CONFIG_SYS_FLASH_PROTECTION
Thomas Chouaf54c182015-10-28 15:10:39 +080027#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
Thomas Chou6168dc62015-10-23 14:55:36 +080028#define CONFIG_SYS_MAX_FLASH_SECT 512
29
30/*
Thomas Chouc3c44952015-11-05 16:37:33 +080031 * NET options
Thomas Chou96fa1e42015-10-22 15:29:11 +080032 */
Thomas Chouc3c44952015-11-05 16:37:33 +080033#define CONFIG_SYS_RX_ETH_BUFFER 0
Thomas Choue07eee32015-10-29 16:43:46 +080034#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
Thomas Chou96fa1e42015-10-22 15:29:11 +080035
36/*
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080037 * BOOTP options
38 */
39#define CONFIG_BOOTP_BOOTFILESIZE
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080040
41/*
Thomas Chouca1d80c2015-08-26 21:24:35 +080042 * FDT options
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080043 */
Thomas Chou857b9cb2014-08-30 17:45:23 +080044#define CONFIG_LMB
45
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080046/*
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080047 * MEMORY ORGANIZATION
Thomas Chou7dfb0602012-04-23 10:55:02 +080048 * -Monitor at top of sdram.
49 * -The heap is placed below the monitor
50 * -The stack is placed below the heap (&grows down).
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080051 */
Thomas Chou6168dc62015-10-23 14:55:36 +080052#define CONFIG_SYS_SDRAM_BASE 0xD0000000
53#define CONFIG_SYS_SDRAM_SIZE 0x08000000
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080054#define CONFIG_MONITOR_IS_IN_RAM
Marek Vasut7ef051e2015-12-15 03:09:23 +010055#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080056#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
57 CONFIG_SYS_SDRAM_SIZE - \
58 CONFIG_SYS_MONITOR_LEN)
Thomas Chou2925e2b2015-11-04 13:28:29 +080059#define CONFIG_SYS_MALLOC_LEN 0x20000
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080060
61/*
Marek Vasut2aee06a2015-12-15 03:09:22 +010062 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
63 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
64 * reset address, no? This will keep the environment in user region
65 * of flash. NOTE: the monitor length must be multiple of sector size
66 * (which is common practice).
67 */
Marek Vasut2aee06a2015-12-15 03:09:22 +010068
69#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */
70#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
71#define CONFIG_ENV_ADDR (0xe2800000 + CONFIG_SYS_MONITOR_LEN)
72
73/*
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080074 * MISC
75 */
Marek Vasutbc3abe12015-12-15 03:09:24 +010076#define CONFIG_SYS_LOAD_ADDR 0xd4000000 /* Half of RAM */
77#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080078#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
Thomas Chou540bb542015-11-04 13:25:20 +080079#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
80 CONFIG_ENV_SIZE - \
81 CONFIG_SYS_MALLOC_LEN - \
82 0x10000)
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080083
Thomas Chou8cbb0dd2010-04-21 08:40:59 +080084#endif /* __CONFIG_H */