blob: c0dc3d38c1237f9441ff68c146dcda330d3da4bd [file] [log] [blame]
Chris Packhama6477f72018-06-25 22:34:57 +12001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
4 */
5
6#ifndef _CONFIG_SBX81LIFXCAT_H
7#define _CONFIG_SBX81LIFXCAT_H
8
9/*
10 * High Level Configuration Options (easy to change)
11 */
12#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
13#define CONFIG_KW88F6281 1 /* SOC Name */
14#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
15#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
Chris Packhama6477f72018-06-25 22:34:57 +120016
17/* additions for new ARM relocation support */
18#define CONFIG_SYS_SDRAM_BASE 0x00000000
19
20#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
21#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
22#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
23#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
24#define CONFIG_KIRKWOOD_GPIO 1
25
Chris Packhama6477f72018-06-25 22:34:57 +120026/*
27 * NS16550 Configuration
28 */
29#define CONFIG_SYS_NS16550
30#define CONFIG_SYS_NS16550_SERIAL
31#define CONFIG_SYS_NS16550_REG_SIZE (-4)
32#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
33#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
34
35/*
36 * Serial Port configuration
37 * The following definitions let you select what serial you want to use
38 * for your console driver.
39 */
40
Chris Packhama6477f72018-06-25 22:34:57 +120041/*
42 * For booting Linux, the board info and command line data
43 * have to be in the first 8 MB of memory, since this is
44 * the maximum mapped by the Linux kernel during initialization.
45 */
46#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
47#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
48#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
49
50#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
51#define MTDPARTS_MTDOOPS "errlog"
52#define CONFIG_DOS_PARTITION
53
54/*
55 * Environment variables configurations
56 */
Chris Packhama6477f72018-06-25 22:34:57 +120057
58/*
59 * U-Boot bootcode configuration
60 */
61
62#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
63#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */
64
65/*
66 * For booting Linux, the board info and command line data
67 * have to be in the first 8 MB of memory, since this is
68 * the maximum mapped by the Linux kernel during initialization.
69 */
70#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
71
72/* size in bytes reserved for initial data */
73
74#include <asm/arch/config.h>
75/* There is no PHY directly connected so don't ask it for link status */
76#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
77
78/*
79 * Other required minimal configurations
80 */
Chris Packhama6477f72018-06-25 22:34:57 +120081#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
82
83/*
84 * Ethernet Driver configuration
85 */
86#ifdef CONFIG_CMD_NET
Chris Packhama6477f72018-06-25 22:34:57 +120087#define CONFIG_NET_MULTI /* specify more that one ports available */
Chris Packhama6477f72018-06-25 22:34:57 +120088#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
89#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
90#define CONFIG_PHY_BASE_ADR 0x01
Chris Packhama6477f72018-06-25 22:34:57 +120091#endif /* CONFIG_CMD_NET */
92
93#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */
94
95#endif /* _CONFIG_SBX81LIFXCAT_H */