blob: 153391e59841aae7b6966942e03d3164711b9dbc [file] [log] [blame]
wdenkfe8c2802002-11-03 00:38:21 +00001/*
Stefan Roese36d830c2007-02-20 10:35:42 +01002 * cpu/ppc4xx/44x_spd_ddr.c
3 * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
4 * DDR controller. Those are 440GP/GX/EP/GR.
5 *
wdenkfe8c2802002-11-03 00:38:21 +00006 * (C) Copyright 2001
7 * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
8 *
9 * Based on code by:
10 *
wdenkdb2f721f2003-03-06 00:58:30 +000011 * Kenneth Johansson ,Ericsson AB.
12 * kenneth.johansson@etx.ericsson.se
wdenkfe8c2802002-11-03 00:38:21 +000013 *
14 * hacked up by bill hunter. fixed so we could run before
15 * serial_init and console_init. previous version avoided this by
16 * running out of cache memory during serial/console init, then running
17 * this code later.
18 *
19 * (C) Copyright 2002
20 * Jun Gu, Artesyn Technology, jung@artesyncp.com
Wolfgang Denk0c8721a2005-09-23 11:05:55 +020021 * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
wdenkfe8c2802002-11-03 00:38:21 +000022 *
Stefan Roesed2d43272007-06-01 15:09:50 +020023 * (C) Copyright 2005-2007
Stefan Roesec157d8e2005-08-01 16:41:48 +020024 * Stefan Roese, DENX Software Engineering, sr@denx.de.
25 *
wdenkfe8c2802002-11-03 00:38:21 +000026 * See file CREDITS for list of people who contributed to this
27 * project.
28 *
29 * This program is free software; you can redistribute it and/or
30 * modify it under the terms of the GNU General Public License as
31 * published by the Free Software Foundation; either version 2 of
32 * the License, or (at your option) any later version.
33 *
34 * This program is distributed in the hope that it will be useful,
35 * but WITHOUT ANY WARRANTY; without even the implied warranty of
36 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
37 * GNU General Public License for more details.
38 *
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
42 * MA 02111-1307 USA
43 */
44
Stefan Roesed2d43272007-06-01 15:09:50 +020045/* define DEBUG for debugging output (obviously ;-)) */
46#if 0
47#define DEBUG
48#endif
49
wdenkfe8c2802002-11-03 00:38:21 +000050#include <common.h>
51#include <asm/processor.h>
52#include <i2c.h>
53#include <ppc4xx.h>
Stefan Roesee2ebe692007-03-07 16:39:36 +010054#include <asm/mmu.h>
wdenkfe8c2802002-11-03 00:38:21 +000055
Grant Ericksonc821b5f2008-05-22 14:44:14 -070056#include "ecc.h"
57
Stefan Roese36d830c2007-02-20 10:35:42 +010058#if defined(CONFIG_SPD_EEPROM) && \
59 (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
60 defined(CONFIG_440EP) || defined(CONFIG_440GR))
wdenkfe8c2802002-11-03 00:38:21 +000061
62/*
63 * Set default values
64 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020065#ifndef CONFIG_SYS_I2C_SPEED
66#define CONFIG_SYS_I2C_SPEED 50000
wdenkfe8c2802002-11-03 00:38:21 +000067#endif
68
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020069#ifndef CONFIG_SYS_I2C_SLAVE
70#define CONFIG_SYS_I2C_SLAVE 0xFE
wdenkfe8c2802002-11-03 00:38:21 +000071#endif
72
Wolfgang Denkf013dac2005-12-04 00:40:34 +010073#define ONE_BILLION 1000000000
Stefan Roesec157d8e2005-08-01 16:41:48 +020074
Heiko Schochera5d71e22007-06-25 19:11:37 +020075/*
76 * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
77 */
78void __spd_ddr_init_hang (void)
79{
80 hang ();
81}
82void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
Heiko Schocher566a4942007-06-22 19:11:54 +020083
wdenkfe8c2802002-11-03 00:38:21 +000084/*-----------------------------------------------------------------------------+
Stefan Roesec157d8e2005-08-01 16:41:48 +020085 | General Definition
86 +-----------------------------------------------------------------------------*/
Wolfgang Denkf013dac2005-12-04 00:40:34 +010087#define DEFAULT_SPD_ADDR1 0x53
88#define DEFAULT_SPD_ADDR2 0x52
89#define MAXBANKS 4 /* at most 4 dimm banks */
90#define MAX_SPD_BYTES 256
91#define NUMHALFCYCLES 4
92#define NUMMEMTESTS 8
93#define NUMMEMWORDS 8
94#define MAXBXCR 4
95#define TRUE 1
96#define FALSE 0
wdenkfe8c2802002-11-03 00:38:21 +000097
Stefan Roesee2ebe692007-03-07 16:39:36 +010098/*
99 * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
100 * region. Right now the cache should still be disabled in U-Boot because of the
101 * EMAC driver, that need it's buffer descriptor to be located in non cached
102 * memory.
103 *
104 * If at some time this restriction doesn't apply anymore, just define
Stefan Roeseea2e1422007-10-31 20:57:11 +0100105 * CONFIG_4xx_DCACHE in the board config file and this code should setup
Stefan Roesee2ebe692007-03-07 16:39:36 +0100106 * everything correctly.
107 */
Stefan Roeseea2e1422007-10-31 20:57:11 +0100108#ifdef CONFIG_4xx_DCACHE
Stefan Roesee2ebe692007-03-07 16:39:36 +0100109#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
110#else
111#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
112#endif
113
Stefan Roesefd49bf02005-11-15 16:04:58 +0100114/* bank_parms is used to sort the bank sizes by descending order */
115struct bank_param {
116 unsigned long cr;
117 unsigned long bank_size_bytes;
118};
119
120typedef struct bank_param BANKPARMS;
121
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200122#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
Eugene OBriend2f68002007-07-31 10:24:56 +0200123extern const unsigned char cfg_simulate_spd_eeprom[128];
Stefan Roesefd49bf02005-11-15 16:04:58 +0100124#endif
wdenkfe8c2802002-11-03 00:38:21 +0000125
Stefan Roesed2d43272007-06-01 15:09:50 +0200126static unsigned char spd_read(uchar chip, uint addr);
127static void get_spd_info(unsigned long *dimm_populated,
128 unsigned char *iic0_dimm_addr,
129 unsigned long num_dimm_banks);
130static void check_mem_type(unsigned long *dimm_populated,
131 unsigned char *iic0_dimm_addr,
132 unsigned long num_dimm_banks);
133static void check_volt_type(unsigned long *dimm_populated,
134 unsigned char *iic0_dimm_addr,
135 unsigned long num_dimm_banks);
136static void program_cfg0(unsigned long *dimm_populated,
137 unsigned char *iic0_dimm_addr,
138 unsigned long num_dimm_banks);
139static void program_cfg1(unsigned long *dimm_populated,
140 unsigned char *iic0_dimm_addr,
141 unsigned long num_dimm_banks);
142static void program_rtr(unsigned long *dimm_populated,
143 unsigned char *iic0_dimm_addr,
144 unsigned long num_dimm_banks);
145static void program_tr0(unsigned long *dimm_populated,
146 unsigned char *iic0_dimm_addr,
147 unsigned long num_dimm_banks);
148static void program_tr1(void);
wdenkfe8c2802002-11-03 00:38:21 +0000149
Stefan Roesed2d43272007-06-01 15:09:50 +0200150static unsigned long program_bxcr(unsigned long *dimm_populated,
151 unsigned char *iic0_dimm_addr,
152 unsigned long num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000153
154/*
155 * This function is reading data from the DIMM module EEPROM over the SPD bus
156 * and uses that to program the sdram controller.
157 *
Wolfgang Denk0c8721a2005-09-23 11:05:55 +0200158 * This works on boards that has the same schematics that the AMCC walnut has.
wdenkfe8c2802002-11-03 00:38:21 +0000159 *
160 * BUG: Don't handle ECC memory
161 * BUG: A few values in the TR register is currently hardcoded
162 */
wdenkfe8c2802002-11-03 00:38:21 +0000163long int spd_sdram(void) {
Stefan Roesec157d8e2005-08-01 16:41:48 +0200164 unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
165 unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
166 unsigned long total_size;
167 unsigned long cfg0;
168 unsigned long mcsts;
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100169 unsigned long num_dimm_banks; /* on board dimm banks */
wdenkfe8c2802002-11-03 00:38:21 +0000170
Stefan Roesec157d8e2005-08-01 16:41:48 +0200171 num_dimm_banks = sizeof(iic0_dimm_addr);
wdenkfe8c2802002-11-03 00:38:21 +0000172
173 /*
174 * Make sure I2C controller is initialized
175 * before continuing.
176 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
wdenkfe8c2802002-11-03 00:38:21 +0000178
Stefan Roesec157d8e2005-08-01 16:41:48 +0200179 /*
180 * Read the SPD information using I2C interface. Check to see if the
181 * DIMM slots are populated.
182 */
183 get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000184
Stefan Roesec157d8e2005-08-01 16:41:48 +0200185 /*
186 * Check the memory type for the dimms plugged.
187 */
188 check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000189
Stefan Roesec157d8e2005-08-01 16:41:48 +0200190 /*
191 * Check the voltage type for the dimms plugged.
192 */
193 check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000194
Stefan Roeseea2e1422007-10-31 20:57:11 +0100195#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
Stefan Roesec157d8e2005-08-01 16:41:48 +0200196 /*
197 * Soft-reset SDRAM controller.
198 */
199 mtsdr(sdr_srst, SDR0_SRST_DMC);
200 mtsdr(sdr_srst, 0x00000000);
wdenk63153492005-04-03 20:55:38 +0000201#endif
202
Stefan Roesec157d8e2005-08-01 16:41:48 +0200203 /*
204 * program 440GP SDRAM controller options (SDRAM0_CFG0)
205 */
206 program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000207
Stefan Roesec157d8e2005-08-01 16:41:48 +0200208 /*
209 * program 440GP SDRAM controller options (SDRAM0_CFG1)
210 */
211 program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000212
Stefan Roesec157d8e2005-08-01 16:41:48 +0200213 /*
214 * program SDRAM refresh register (SDRAM0_RTR)
215 */
216 program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000217
Stefan Roesec157d8e2005-08-01 16:41:48 +0200218 /*
219 * program SDRAM Timing Register 0 (SDRAM0_TR0)
220 */
221 program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000222
Stefan Roesec157d8e2005-08-01 16:41:48 +0200223 /*
224 * program the BxCR registers to find out total sdram installed
225 */
226 total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
227 num_dimm_banks);
wdenkfe8c2802002-11-03 00:38:21 +0000228
Stefan Roesee2ebe692007-03-07 16:39:36 +0100229#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
230 /* and program tlb entries for this size (dynamic) */
Stefan Roesedbca2082007-06-14 11:14:32 +0200231 program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
Stefan Roesee2ebe692007-03-07 16:39:36 +0100232#endif
233
Stefan Roesec157d8e2005-08-01 16:41:48 +0200234 /*
235 * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
236 */
237 mtsdram(mem_clktr, 0x40000000);
wdenkfe8c2802002-11-03 00:38:21 +0000238
Stefan Roesec157d8e2005-08-01 16:41:48 +0200239 /*
240 * delay to ensure 200 usec has elapsed
241 */
242 udelay(400);
wdenkfe8c2802002-11-03 00:38:21 +0000243
Stefan Roesec157d8e2005-08-01 16:41:48 +0200244 /*
245 * enable the memory controller
246 */
247 mfsdram(mem_cfg0, cfg0);
248 mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
wdenkfe8c2802002-11-03 00:38:21 +0000249
Stefan Roesec157d8e2005-08-01 16:41:48 +0200250 /*
251 * wait for SDRAM_CFG0_DC_EN to complete
252 */
253 while (1) {
254 mfsdram(mem_mcsts, mcsts);
Stefan Roesed2d43272007-06-01 15:09:50 +0200255 if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
Stefan Roesec157d8e2005-08-01 16:41:48 +0200256 break;
wdenk8bde7f72003-06-27 21:31:46 +0000257 }
wdenkfe8c2802002-11-03 00:38:21 +0000258
Stefan Roesec157d8e2005-08-01 16:41:48 +0200259 /*
260 * program SDRAM Timing Register 1, adding some delays
261 */
262 program_tr1();
wdenkfe8c2802002-11-03 00:38:21 +0000263
Stefan Roesed2d43272007-06-01 15:09:50 +0200264#ifdef CONFIG_DDR_ECC
Stefan Roesec157d8e2005-08-01 16:41:48 +0200265 /*
Stefan Roesed2d43272007-06-01 15:09:50 +0200266 * If ecc is enabled, initialize the parity bits.
Stefan Roesec157d8e2005-08-01 16:41:48 +0200267 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200268 ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
Stefan Roesed2d43272007-06-01 15:09:50 +0200269#endif
wdenkfe8c2802002-11-03 00:38:21 +0000270
271 return total_size;
272}
273
Stefan Roesed2d43272007-06-01 15:09:50 +0200274static unsigned char spd_read(uchar chip, uint addr)
Stefan Roesefd49bf02005-11-15 16:04:58 +0100275{
wdenkfe8c2802002-11-03 00:38:21 +0000276 unsigned char data[2];
277
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200278#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
279 if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
Stefan Roesefd49bf02005-11-15 16:04:58 +0100280 /*
281 * Onboard spd eeprom requested -> simulate values
282 */
283 return cfg_simulate_spd_eeprom[addr];
284 }
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
Stefan Roesefd49bf02005-11-15 16:04:58 +0100286
Stefan Roesec157d8e2005-08-01 16:41:48 +0200287 if (i2c_probe(chip) == 0) {
288 if (i2c_read(chip, addr, 1, data, 1) == 0) {
289 return data[0];
290 }
291 }
292
293 return 0;
wdenkfe8c2802002-11-03 00:38:21 +0000294}
295
Stefan Roesed2d43272007-06-01 15:09:50 +0200296static void get_spd_info(unsigned long *dimm_populated,
297 unsigned char *iic0_dimm_addr,
298 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +0000299{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200300 unsigned long dimm_num;
301 unsigned long dimm_found;
302 unsigned char num_of_bytes;
303 unsigned char total_size;
wdenkfe8c2802002-11-03 00:38:21 +0000304
Stefan Roesec157d8e2005-08-01 16:41:48 +0200305 dimm_found = FALSE;
306 for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
307 num_of_bytes = 0;
308 total_size = 0;
wdenkfe8c2802002-11-03 00:38:21 +0000309
Stefan Roesec157d8e2005-08-01 16:41:48 +0200310 num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
311 total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
wdenkfe8c2802002-11-03 00:38:21 +0000312
Stefan Roesec157d8e2005-08-01 16:41:48 +0200313 if ((num_of_bytes != 0) && (total_size != 0)) {
314 dimm_populated[dimm_num] = TRUE;
315 dimm_found = TRUE;
Stefan Roesed2d43272007-06-01 15:09:50 +0200316 debug("DIMM slot %lu: populated\n", dimm_num);
Stefan Roesec157d8e2005-08-01 16:41:48 +0200317 } else {
318 dimm_populated[dimm_num] = FALSE;
Stefan Roesed2d43272007-06-01 15:09:50 +0200319 debug("DIMM slot %lu: Not populated\n", dimm_num);
Stefan Roesec157d8e2005-08-01 16:41:48 +0200320 }
wdenk8bde7f72003-06-27 21:31:46 +0000321 }
wdenkfe8c2802002-11-03 00:38:21 +0000322
Stefan Roesec157d8e2005-08-01 16:41:48 +0200323 if (dimm_found == FALSE) {
324 printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
Heiko Schochera5d71e22007-06-25 19:11:37 +0200325 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +0200326 }
wdenkfe8c2802002-11-03 00:38:21 +0000327}
328
Stefan Roesed2d43272007-06-01 15:09:50 +0200329static void check_mem_type(unsigned long *dimm_populated,
330 unsigned char *iic0_dimm_addr,
331 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +0000332{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200333 unsigned long dimm_num;
334 unsigned char dimm_type;
wdenkfe8c2802002-11-03 00:38:21 +0000335
Stefan Roesec157d8e2005-08-01 16:41:48 +0200336 for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
337 if (dimm_populated[dimm_num] == TRUE) {
338 dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
339 switch (dimm_type) {
340 case 7:
Stefan Roesed2d43272007-06-01 15:09:50 +0200341 debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
Stefan Roesec157d8e2005-08-01 16:41:48 +0200342 break;
343 default:
344 printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
345 dimm_num);
346 printf("Only DDR SDRAM DIMMs are supported.\n");
347 printf("Replace the DIMM module with a supported DIMM.\n\n");
Heiko Schochera5d71e22007-06-25 19:11:37 +0200348 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +0200349 break;
350 }
351 }
wdenk8bde7f72003-06-27 21:31:46 +0000352 }
wdenkfe8c2802002-11-03 00:38:21 +0000353}
354
Stefan Roesed2d43272007-06-01 15:09:50 +0200355static void check_volt_type(unsigned long *dimm_populated,
356 unsigned char *iic0_dimm_addr,
357 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +0000358{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200359 unsigned long dimm_num;
360 unsigned long voltage_type;
wdenkfe8c2802002-11-03 00:38:21 +0000361
Stefan Roesec157d8e2005-08-01 16:41:48 +0200362 for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
363 if (dimm_populated[dimm_num] == TRUE) {
364 voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
365 if (voltage_type != 0x04) {
366 printf("ERROR: DIMM %lu with unsupported voltage level.\n",
367 dimm_num);
Heiko Schochera5d71e22007-06-25 19:11:37 +0200368 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +0200369 } else {
Stefan Roesed2d43272007-06-01 15:09:50 +0200370 debug("DIMM %lu voltage level supported.\n", dimm_num);
Stefan Roesec157d8e2005-08-01 16:41:48 +0200371 }
372 break;
373 }
wdenk8bde7f72003-06-27 21:31:46 +0000374 }
wdenkfe8c2802002-11-03 00:38:21 +0000375}
376
Stefan Roesed2d43272007-06-01 15:09:50 +0200377static void program_cfg0(unsigned long *dimm_populated,
378 unsigned char *iic0_dimm_addr,
379 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +0000380{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200381 unsigned long dimm_num;
382 unsigned long cfg0;
383 unsigned long ecc_enabled;
384 unsigned char ecc;
385 unsigned char attributes;
386 unsigned long data_width;
387 unsigned long dimm_32bit;
388 unsigned long dimm_64bit;
wdenkfe8c2802002-11-03 00:38:21 +0000389
Stefan Roesec157d8e2005-08-01 16:41:48 +0200390 /*
391 * get Memory Controller Options 0 data
392 */
393 mfsdram(mem_cfg0, cfg0);
wdenkfe8c2802002-11-03 00:38:21 +0000394
Stefan Roesec157d8e2005-08-01 16:41:48 +0200395 /*
396 * clear bits
397 */
398 cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
399 SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
400 SDRAM_CFG0_DMWD_MASK |
401 SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
wdenkfe8c2802002-11-03 00:38:21 +0000402
403
Stefan Roesec157d8e2005-08-01 16:41:48 +0200404 /*
405 * FIXME: assume the DDR SDRAMs in both banks are the same
406 */
407 ecc_enabled = TRUE;
408 for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
409 if (dimm_populated[dimm_num] == TRUE) {
410 ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
411 if (ecc != 0x02) {
412 ecc_enabled = FALSE;
413 }
wdenkfe8c2802002-11-03 00:38:21 +0000414
Stefan Roesec157d8e2005-08-01 16:41:48 +0200415 /*
416 * program Registered DIMM Enable
417 */
418 attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
419 if ((attributes & 0x02) != 0x00) {
420 cfg0 |= SDRAM_CFG0_RDEN;
421 }
wdenkfe8c2802002-11-03 00:38:21 +0000422
Stefan Roesec157d8e2005-08-01 16:41:48 +0200423 /*
424 * program DDR SDRAM Data Width
425 */
426 data_width =
427 (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
428 (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
429 if (data_width == 64 || data_width == 72) {
430 dimm_64bit = TRUE;
431 cfg0 |= SDRAM_CFG0_DMWD_64;
432 } else if (data_width == 32 || data_width == 40) {
433 dimm_32bit = TRUE;
434 cfg0 |= SDRAM_CFG0_DMWD_32;
435 } else {
436 printf("WARNING: DIMM with datawidth of %lu bits.\n",
437 data_width);
438 printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
Heiko Schochera5d71e22007-06-25 19:11:37 +0200439 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +0200440 }
441 break;
442 }
wdenk8bde7f72003-06-27 21:31:46 +0000443 }
wdenkfe8c2802002-11-03 00:38:21 +0000444
Stefan Roesec157d8e2005-08-01 16:41:48 +0200445 /*
446 * program Memory Data Error Checking
447 */
448 if (ecc_enabled == TRUE) {
449 cfg0 |= SDRAM_CFG0_MCHK_GEN;
450 } else {
451 cfg0 |= SDRAM_CFG0_MCHK_NON;
452 }
wdenkfe8c2802002-11-03 00:38:21 +0000453
Stefan Roesec157d8e2005-08-01 16:41:48 +0200454 /*
Stefan Roesea2c95a72006-07-28 18:34:58 +0200455 * program Page Management Unit (0 == enabled)
Stefan Roesec157d8e2005-08-01 16:41:48 +0200456 */
Stefan Roesea2c95a72006-07-28 18:34:58 +0200457 cfg0 &= ~SDRAM_CFG0_PMUD;
wdenkfe8c2802002-11-03 00:38:21 +0000458
Stefan Roesec157d8e2005-08-01 16:41:48 +0200459 /*
460 * program Memory Controller Options 0
461 * Note: DCEN must be enabled after all DDR SDRAM controller
462 * configuration registers get initialized.
463 */
464 mtsdram(mem_cfg0, cfg0);
wdenkfe8c2802002-11-03 00:38:21 +0000465}
466
Stefan Roesed2d43272007-06-01 15:09:50 +0200467static void program_cfg1(unsigned long *dimm_populated,
468 unsigned char *iic0_dimm_addr,
469 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +0000470{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200471 unsigned long cfg1;
472 mfsdram(mem_cfg1, cfg1);
wdenkfe8c2802002-11-03 00:38:21 +0000473
Stefan Roesec157d8e2005-08-01 16:41:48 +0200474 /*
475 * Self-refresh exit, disable PM
476 */
477 cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
wdenkfe8c2802002-11-03 00:38:21 +0000478
Stefan Roesec157d8e2005-08-01 16:41:48 +0200479 /*
480 * program Memory Controller Options 1
481 */
482 mtsdram(mem_cfg1, cfg1);
wdenkfe8c2802002-11-03 00:38:21 +0000483}
484
Stefan Roesed2d43272007-06-01 15:09:50 +0200485static void program_rtr(unsigned long *dimm_populated,
486 unsigned char *iic0_dimm_addr,
487 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +0000488{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200489 unsigned long dimm_num;
490 unsigned long bus_period_x_10;
491 unsigned long refresh_rate = 0;
492 unsigned char refresh_rate_type;
493 unsigned long refresh_interval;
494 unsigned long sdram_rtr;
Stefan Roese087dfdb2007-10-21 08:12:41 +0200495 PPC4xx_SYS_INFO sys_info;
wdenkfe8c2802002-11-03 00:38:21 +0000496
Stefan Roesec157d8e2005-08-01 16:41:48 +0200497 /*
498 * get the board info
499 */
500 get_sys_info(&sys_info);
501 bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
wdenkfe8c2802002-11-03 00:38:21 +0000502
Stefan Roesec157d8e2005-08-01 16:41:48 +0200503 for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
504 if (dimm_populated[dimm_num] == TRUE) {
505 refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
506 switch (refresh_rate_type) {
507 case 0x00:
508 refresh_rate = 15625;
509 break;
510 case 0x01:
511 refresh_rate = 15625/4;
512 break;
513 case 0x02:
514 refresh_rate = 15625/2;
515 break;
516 case 0x03:
517 refresh_rate = 15626*2;
518 break;
519 case 0x04:
520 refresh_rate = 15625*4;
521 break;
522 case 0x05:
523 refresh_rate = 15625*8;
524 break;
525 default:
526 printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
527 dimm_num);
528 printf("Replace the DIMM module with a supported DIMM.\n");
529 break;
530 }
wdenkfe8c2802002-11-03 00:38:21 +0000531
Stefan Roesec157d8e2005-08-01 16:41:48 +0200532 break;
533 }
wdenk8bde7f72003-06-27 21:31:46 +0000534 }
wdenkfe8c2802002-11-03 00:38:21 +0000535
Stefan Roesec157d8e2005-08-01 16:41:48 +0200536 refresh_interval = refresh_rate * 10 / bus_period_x_10;
537 sdram_rtr = (refresh_interval & 0x3ff8) << 16;
wdenkfe8c2802002-11-03 00:38:21 +0000538
Stefan Roesec157d8e2005-08-01 16:41:48 +0200539 /*
540 * program Refresh Timer Register (SDRAM0_RTR)
541 */
542 mtsdram(mem_rtr, sdram_rtr);
wdenkfe8c2802002-11-03 00:38:21 +0000543}
544
Stefan Roesed2d43272007-06-01 15:09:50 +0200545static void program_tr0(unsigned long *dimm_populated,
546 unsigned char *iic0_dimm_addr,
547 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +0000548{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200549 unsigned long dimm_num;
550 unsigned long tr0;
551 unsigned char wcsbc;
552 unsigned char t_rp_ns;
553 unsigned char t_rcd_ns;
554 unsigned char t_ras_ns;
555 unsigned long t_rp_clk;
556 unsigned long t_ras_rcd_clk;
557 unsigned long t_rcd_clk;
558 unsigned long t_rfc_clk;
559 unsigned long plb_check;
560 unsigned char cas_bit;
561 unsigned long cas_index;
562 unsigned char cas_2_0_available;
563 unsigned char cas_2_5_available;
564 unsigned char cas_3_0_available;
565 unsigned long cycle_time_ns_x_10[3];
566 unsigned long tcyc_3_0_ns_x_10;
567 unsigned long tcyc_2_5_ns_x_10;
568 unsigned long tcyc_2_0_ns_x_10;
569 unsigned long tcyc_reg;
570 unsigned long bus_period_x_10;
Stefan Roese087dfdb2007-10-21 08:12:41 +0200571 PPC4xx_SYS_INFO sys_info;
Stefan Roesec157d8e2005-08-01 16:41:48 +0200572 unsigned long residue;
wdenkfe8c2802002-11-03 00:38:21 +0000573
Stefan Roesec157d8e2005-08-01 16:41:48 +0200574 /*
575 * get the board info
576 */
577 get_sys_info(&sys_info);
578 bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
wdenkfe8c2802002-11-03 00:38:21 +0000579
Stefan Roesec157d8e2005-08-01 16:41:48 +0200580 /*
581 * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
582 */
583 mfsdram(mem_tr0, tr0);
584 tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
585 SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
586 SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
587 SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
wdenkfe8c2802002-11-03 00:38:21 +0000588
Stefan Roesec157d8e2005-08-01 16:41:48 +0200589 /*
590 * initialization
591 */
592 wcsbc = 0;
593 t_rp_ns = 0;
594 t_rcd_ns = 0;
595 t_ras_ns = 0;
596 cas_2_0_available = TRUE;
597 cas_2_5_available = TRUE;
598 cas_3_0_available = TRUE;
599 tcyc_2_0_ns_x_10 = 0;
600 tcyc_2_5_ns_x_10 = 0;
601 tcyc_3_0_ns_x_10 = 0;
wdenkfe8c2802002-11-03 00:38:21 +0000602
Stefan Roesec157d8e2005-08-01 16:41:48 +0200603 for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
604 if (dimm_populated[dimm_num] == TRUE) {
605 wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100606 t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
Stefan Roesec157d8e2005-08-01 16:41:48 +0200607 t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
608 t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
609 cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
wdenkfe8c2802002-11-03 00:38:21 +0000610
Stefan Roesec157d8e2005-08-01 16:41:48 +0200611 for (cas_index = 0; cas_index < 3; cas_index++) {
612 switch (cas_index) {
613 case 0:
614 tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
615 break;
616 case 1:
617 tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
618 break;
619 default:
620 tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
621 break;
622 }
623
624 if ((tcyc_reg & 0x0F) >= 10) {
625 printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
626 dimm_num);
Heiko Schochera5d71e22007-06-25 19:11:37 +0200627 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +0200628 }
629
630 cycle_time_ns_x_10[cas_index] =
631 (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
632 }
633
634 cas_index = 0;
635
636 if ((cas_bit & 0x80) != 0) {
637 cas_index += 3;
638 } else if ((cas_bit & 0x40) != 0) {
639 cas_index += 2;
640 } else if ((cas_bit & 0x20) != 0) {
641 cas_index += 1;
642 }
643
644 if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
645 tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
646 cas_index++;
647 } else {
648 if (cas_index != 0) {
649 cas_index++;
650 }
651 cas_3_0_available = FALSE;
652 }
653
654 if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
655 tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
656 cas_index++;
657 } else {
658 if (cas_index != 0) {
659 cas_index++;
660 }
661 cas_2_5_available = FALSE;
662 }
663
664 if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
665 tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
666 cas_index++;
667 } else {
668 if (cas_index != 0) {
669 cas_index++;
670 }
671 cas_2_0_available = FALSE;
672 }
673
674 break;
wdenk8bde7f72003-06-27 21:31:46 +0000675 }
wdenk8bde7f72003-06-27 21:31:46 +0000676 }
wdenkfe8c2802002-11-03 00:38:21 +0000677
Stefan Roesec157d8e2005-08-01 16:41:48 +0200678 /*
679 * Program SD_WR and SD_WCSBC fields
680 */
Wolfgang Denkf013dac2005-12-04 00:40:34 +0100681 tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
Stefan Roesec157d8e2005-08-01 16:41:48 +0200682 switch (wcsbc) {
683 case 0:
684 tr0 |= SDRAM_TR0_SDWD_0_CLK;
685 break;
686 default:
687 tr0 |= SDRAM_TR0_SDWD_1_CLK;
688 break;
689 }
wdenkfe8c2802002-11-03 00:38:21 +0000690
Stefan Roesec157d8e2005-08-01 16:41:48 +0200691 /*
692 * Program SD_CASL field
693 */
694 if ((cas_2_0_available == TRUE) &&
695 (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
696 tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
697 } else if ((cas_2_5_available == TRUE) &&
698 (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
699 tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
700 } else if ((cas_3_0_available == TRUE) &&
701 (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
702 tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
703 } else {
704 printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
705 printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
706 printf("Make sure the PLB speed is within the supported range.\n");
Heiko Schochera5d71e22007-06-25 19:11:37 +0200707 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +0200708 }
wdenkfe8c2802002-11-03 00:38:21 +0000709
Stefan Roesec157d8e2005-08-01 16:41:48 +0200710 /*
711 * Calculate Trp in clock cycles and round up if necessary
712 * Program SD_PTA field
713 */
714 t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
715 plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
716 if (sys_info.freqPLB != plb_check) {
717 t_rp_clk++;
718 }
719 switch ((unsigned long)t_rp_clk) {
720 case 0:
721 case 1:
722 case 2:
723 tr0 |= SDRAM_TR0_SDPA_2_CLK;
724 break;
725 case 3:
726 tr0 |= SDRAM_TR0_SDPA_3_CLK;
727 break;
728 default:
729 tr0 |= SDRAM_TR0_SDPA_4_CLK;
730 break;
731 }
wdenkfe8c2802002-11-03 00:38:21 +0000732
Stefan Roesec157d8e2005-08-01 16:41:48 +0200733 /*
734 * Program SD_CTP field
735 */
736 t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
737 plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
738 if (sys_info.freqPLB != plb_check) {
739 t_ras_rcd_clk++;
740 }
741 switch (t_ras_rcd_clk) {
742 case 0:
743 case 1:
744 case 2:
745 tr0 |= SDRAM_TR0_SDCP_2_CLK;
746 break;
747 case 3:
748 tr0 |= SDRAM_TR0_SDCP_3_CLK;
749 break;
750 case 4:
751 tr0 |= SDRAM_TR0_SDCP_4_CLK;
752 break;
753 default:
754 tr0 |= SDRAM_TR0_SDCP_5_CLK;
755 break;
756 }
wdenkfe8c2802002-11-03 00:38:21 +0000757
Stefan Roesec157d8e2005-08-01 16:41:48 +0200758 /*
759 * Program SD_LDF field
760 */
761 tr0 |= SDRAM_TR0_SDLD_2_CLK;
wdenkfe8c2802002-11-03 00:38:21 +0000762
Stefan Roesec157d8e2005-08-01 16:41:48 +0200763 /*
764 * Program SD_RFTA field
765 * FIXME tRFC hardcoded as 75 nanoseconds
766 */
767 t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
768 residue = sys_info.freqPLB % (ONE_BILLION / 75);
769 if (residue >= (ONE_BILLION / 150)) {
770 t_rfc_clk++;
771 }
772 switch (t_rfc_clk) {
773 case 0:
774 case 1:
775 case 2:
776 case 3:
777 case 4:
778 case 5:
779 case 6:
780 tr0 |= SDRAM_TR0_SDRA_6_CLK;
781 break;
782 case 7:
783 tr0 |= SDRAM_TR0_SDRA_7_CLK;
784 break;
785 case 8:
786 tr0 |= SDRAM_TR0_SDRA_8_CLK;
787 break;
788 case 9:
789 tr0 |= SDRAM_TR0_SDRA_9_CLK;
790 break;
791 case 10:
792 tr0 |= SDRAM_TR0_SDRA_10_CLK;
793 break;
794 case 11:
795 tr0 |= SDRAM_TR0_SDRA_11_CLK;
796 break;
797 case 12:
798 tr0 |= SDRAM_TR0_SDRA_12_CLK;
799 break;
800 default:
801 tr0 |= SDRAM_TR0_SDRA_13_CLK;
802 break;
803 }
wdenkfe8c2802002-11-03 00:38:21 +0000804
Stefan Roesec157d8e2005-08-01 16:41:48 +0200805 /*
806 * Program SD_RCD field
807 */
808 t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
809 plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
810 if (sys_info.freqPLB != plb_check) {
811 t_rcd_clk++;
812 }
813 switch (t_rcd_clk) {
814 case 0:
815 case 1:
816 case 2:
817 tr0 |= SDRAM_TR0_SDRD_2_CLK;
818 break;
819 case 3:
820 tr0 |= SDRAM_TR0_SDRD_3_CLK;
821 break;
822 default:
823 tr0 |= SDRAM_TR0_SDRD_4_CLK;
824 break;
825 }
wdenkfe8c2802002-11-03 00:38:21 +0000826
Stefan Roesed2d43272007-06-01 15:09:50 +0200827 debug("tr0: %x\n", tr0);
Stefan Roesec157d8e2005-08-01 16:41:48 +0200828 mtsdram(mem_tr0, tr0);
wdenkfe8c2802002-11-03 00:38:21 +0000829}
830
Stefan Roesed2d43272007-06-01 15:09:50 +0200831static int short_mem_test(void)
832{
833 unsigned long i, j;
834 unsigned long bxcr_num;
835 unsigned long *membase;
836 const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
837 {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
838 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
839 {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
840 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
841 {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
842 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
843 {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
844 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
845 {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
846 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
847 {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
848 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
849 {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
850 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
851 {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
852 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
853
854 for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
855 mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
856 if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
857 /* Bank is enabled */
858 membase = (unsigned long*)
859 (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
860
861 /*
862 * Run the short memory test
863 */
864 for (i = 0; i < NUMMEMTESTS; i++) {
865 for (j = 0; j < NUMMEMWORDS; j++) {
Wolfgang Denk239f05e2007-07-12 01:45:34 +0200866 /* printf("bank enabled base:%x\n", &membase[j]); */
Stefan Roesed2d43272007-06-01 15:09:50 +0200867 membase[j] = test[i][j];
868 ppcDcbf((unsigned long)&(membase[j]));
869 }
870
871 for (j = 0; j < NUMMEMWORDS; j++) {
872 if (membase[j] != test[i][j]) {
873 ppcDcbf((unsigned long)&(membase[j]));
874 return 0;
875 }
876 ppcDcbf((unsigned long)&(membase[j]));
877 }
878
879 if (j < NUMMEMWORDS)
880 return 0;
881 }
882
883 /*
884 * see if the rdclt value passed
885 */
886 if (i < NUMMEMTESTS)
887 return 0;
888 }
889 }
890
891 return 1;
892}
893
894static void program_tr1(void)
wdenkfe8c2802002-11-03 00:38:21 +0000895{
Stefan Roesec157d8e2005-08-01 16:41:48 +0200896 unsigned long tr0;
897 unsigned long tr1;
898 unsigned long cfg0;
899 unsigned long ecc_temp;
900 unsigned long dlycal;
901 unsigned long dly_val;
Stefan Roesed2d43272007-06-01 15:09:50 +0200902 unsigned long k;
Stefan Roesec157d8e2005-08-01 16:41:48 +0200903 unsigned long max_pass_length;
904 unsigned long current_pass_length;
905 unsigned long current_fail_length;
906 unsigned long current_start;
907 unsigned long rdclt;
908 unsigned long rdclt_offset;
909 long max_start;
910 long max_end;
911 long rdclt_average;
912 unsigned char window_found;
913 unsigned char fail_found;
914 unsigned char pass_found;
Stefan Roese087dfdb2007-10-21 08:12:41 +0200915 PPC4xx_SYS_INFO sys_info;
wdenkfe8c2802002-11-03 00:38:21 +0000916
Stefan Roesec157d8e2005-08-01 16:41:48 +0200917 /*
918 * get the board info
919 */
920 get_sys_info(&sys_info);
wdenkfe8c2802002-11-03 00:38:21 +0000921
Stefan Roesec157d8e2005-08-01 16:41:48 +0200922 /*
923 * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
924 */
925 mfsdram(mem_tr1, tr1);
926 tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
927 SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
wdenkfe8c2802002-11-03 00:38:21 +0000928
Stefan Roesec157d8e2005-08-01 16:41:48 +0200929 mfsdram(mem_tr0, tr0);
930 if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
931 (sys_info.freqPLB > 100000000)) {
932 tr1 |= SDRAM_TR1_RDSS_TR2;
933 tr1 |= SDRAM_TR1_RDSL_STAGE3;
934 tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
935 } else {
936 tr1 |= SDRAM_TR1_RDSS_TR1;
937 tr1 |= SDRAM_TR1_RDSL_STAGE2;
938 tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
wdenk8bde7f72003-06-27 21:31:46 +0000939 }
wdenkfe8c2802002-11-03 00:38:21 +0000940
Stefan Roesec157d8e2005-08-01 16:41:48 +0200941 /*
942 * save CFG0 ECC setting to a temporary variable and turn ECC off
943 */
944 mfsdram(mem_cfg0, cfg0);
945 ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
946 mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
947
948 /*
949 * get the delay line calibration register value
950 */
951 mfsdram(mem_dlycal, dlycal);
952 dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
953
954 max_pass_length = 0;
955 max_start = 0;
956 max_end = 0;
957 current_pass_length = 0;
958 current_fail_length = 0;
959 current_start = 0;
960 rdclt_offset = 0;
961 window_found = FALSE;
962 fail_found = FALSE;
963 pass_found = FALSE;
Stefan Roesed2d43272007-06-01 15:09:50 +0200964 debug("Starting memory test ");
965
Stefan Roesec157d8e2005-08-01 16:41:48 +0200966 for (k = 0; k < NUMHALFCYCLES; k++) {
Stefan Roesed2d43272007-06-01 15:09:50 +0200967 for (rdclt = 0; rdclt < dly_val; rdclt++) {
Stefan Roesec157d8e2005-08-01 16:41:48 +0200968 /*
969 * Set the timing reg for the test.
970 */
971 mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
972
Stefan Roesed2d43272007-06-01 15:09:50 +0200973 if (short_mem_test()) {
Stefan Roesec157d8e2005-08-01 16:41:48 +0200974 if (fail_found == TRUE) {
975 pass_found = TRUE;
976 if (current_pass_length == 0) {
977 current_start = rdclt_offset + rdclt;
978 }
979
980 current_fail_length = 0;
981 current_pass_length++;
982
983 if (current_pass_length > max_pass_length) {
984 max_pass_length = current_pass_length;
985 max_start = current_start;
986 max_end = rdclt_offset + rdclt;
987 }
988 }
989 } else {
990 current_pass_length = 0;
991 current_fail_length++;
992
993 if (current_fail_length >= (dly_val>>2)) {
994 if (fail_found == FALSE) {
995 fail_found = TRUE;
996 } else if (pass_found == TRUE) {
997 window_found = TRUE;
998 break;
999 }
1000 }
1001 }
1002 }
Stefan Roesed2d43272007-06-01 15:09:50 +02001003 debug(".");
1004
Stefan Roesec157d8e2005-08-01 16:41:48 +02001005 if (window_found == TRUE) {
1006 break;
1007 }
1008
1009 tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
1010 rdclt_offset += dly_val;
1011 }
Stefan Roesed2d43272007-06-01 15:09:50 +02001012 debug("\n");
wdenkfe8c2802002-11-03 00:38:21 +00001013
Stefan Roesec157d8e2005-08-01 16:41:48 +02001014 /*
1015 * make sure we find the window
1016 */
1017 if (window_found == FALSE) {
1018 printf("ERROR: Cannot determine a common read delay.\n");
Heiko Schochera5d71e22007-06-25 19:11:37 +02001019 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +02001020 }
wdenkfe8c2802002-11-03 00:38:21 +00001021
Stefan Roesec157d8e2005-08-01 16:41:48 +02001022 /*
1023 * restore the orignal ECC setting
1024 */
1025 mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
wdenkfe8c2802002-11-03 00:38:21 +00001026
Stefan Roesec157d8e2005-08-01 16:41:48 +02001027 /*
1028 * set the SDRAM TR1 RDCD value
1029 */
1030 tr1 &= ~SDRAM_TR1_RDCD_MASK;
1031 if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
1032 tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
1033 } else {
1034 tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
1035 }
wdenkfe8c2802002-11-03 00:38:21 +00001036
Stefan Roesec157d8e2005-08-01 16:41:48 +02001037 /*
1038 * set the SDRAM TR1 RDCLT value
1039 */
1040 tr1 &= ~SDRAM_TR1_RDCT_MASK;
1041 while (max_end >= (dly_val << 1)) {
1042 max_end -= (dly_val << 1);
1043 max_start -= (dly_val << 1);
1044 }
wdenkfe8c2802002-11-03 00:38:21 +00001045
Stefan Roesec157d8e2005-08-01 16:41:48 +02001046 rdclt_average = ((max_start + max_end) >> 1);
wdenkfe8c2802002-11-03 00:38:21 +00001047
Stefan Roesec157d8e2005-08-01 16:41:48 +02001048 if (rdclt_average < 0) {
1049 rdclt_average = 0;
1050 }
wdenkfe8c2802002-11-03 00:38:21 +00001051
Stefan Roesec157d8e2005-08-01 16:41:48 +02001052 if (rdclt_average >= dly_val) {
1053 rdclt_average -= dly_val;
1054 tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
1055 }
1056 tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
wdenkfe8c2802002-11-03 00:38:21 +00001057
Stefan Roesed2d43272007-06-01 15:09:50 +02001058 debug("tr1: %x\n", tr1);
1059
Stefan Roesec157d8e2005-08-01 16:41:48 +02001060 /*
1061 * program SDRAM Timing Register 1 TR1
1062 */
1063 mtsdram(mem_tr1, tr1);
wdenkfe8c2802002-11-03 00:38:21 +00001064}
1065
Stefan Roesed2d43272007-06-01 15:09:50 +02001066static unsigned long program_bxcr(unsigned long *dimm_populated,
1067 unsigned char *iic0_dimm_addr,
1068 unsigned long num_dimm_banks)
wdenkfe8c2802002-11-03 00:38:21 +00001069{
Stefan Roesec157d8e2005-08-01 16:41:48 +02001070 unsigned long dimm_num;
Stefan Roesec157d8e2005-08-01 16:41:48 +02001071 unsigned long bank_base_addr;
Stefan Roesec157d8e2005-08-01 16:41:48 +02001072 unsigned long cr;
1073 unsigned long i;
Stefan Roesefd49bf02005-11-15 16:04:58 +01001074 unsigned long j;
Stefan Roesec157d8e2005-08-01 16:41:48 +02001075 unsigned long temp;
1076 unsigned char num_row_addr;
1077 unsigned char num_col_addr;
1078 unsigned char num_banks;
1079 unsigned char bank_size_id;
Stefan Roesefd49bf02005-11-15 16:04:58 +01001080 unsigned long ctrl_bank_num[MAXBANKS];
1081 unsigned long bx_cr_num;
1082 unsigned long largest_size_index;
Wolfgang Denkf013dac2005-12-04 00:40:34 +01001083 unsigned long largest_size;
1084 unsigned long current_size_index;
Stefan Roesefd49bf02005-11-15 16:04:58 +01001085 BANKPARMS bank_parms[MAXBXCR];
1086 unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
1087 unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
wdenkfe8c2802002-11-03 00:38:21 +00001088
Stefan Roesec157d8e2005-08-01 16:41:48 +02001089 /*
1090 * Set the BxCR regs. First, wipe out the bank config registers.
1091 */
Stefan Roesefd49bf02005-11-15 16:04:58 +01001092 for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
1093 mtdcr(memcfga, mem_b0cr + (bx_cr_num << 2));
Stefan Roesec157d8e2005-08-01 16:41:48 +02001094 mtdcr(memcfgd, 0x00000000);
Stefan Roesefd49bf02005-11-15 16:04:58 +01001095 bank_parms[bx_cr_num].bank_size_bytes = 0;
wdenk8bde7f72003-06-27 21:31:46 +00001096 }
Stefan Roesefd49bf02005-11-15 16:04:58 +01001097
1098#ifdef CONFIG_BAMBOO
1099 /*
1100 * This next section is hardware dependent and must be programmed
Stefan Roesed2d43272007-06-01 15:09:50 +02001101 * to match the hardware. For bamboo, the following holds...
1102 * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard)
Stefan Roesefd49bf02005-11-15 16:04:58 +01001103 * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
1104 * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
1105 * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
1106 * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
1107 */
1108 ctrl_bank_num[0] = 0;
1109 ctrl_bank_num[1] = 1;
1110 ctrl_bank_num[2] = 3;
1111#else
Stefan Roesed2d43272007-06-01 15:09:50 +02001112 /*
1113 * Ocotea, Ebony and the other IBM/AMCC eval boards have
1114 * 2 DIMM slots with each max 2 banks
1115 */
Stefan Roesefd49bf02005-11-15 16:04:58 +01001116 ctrl_bank_num[0] = 0;
Stefan Roesed2d43272007-06-01 15:09:50 +02001117 ctrl_bank_num[1] = 2;
Stefan Roese17f50f222005-08-04 17:09:16 +02001118#endif
wdenkfe8c2802002-11-03 00:38:21 +00001119
Stefan Roesec157d8e2005-08-01 16:41:48 +02001120 /*
1121 * reset the bank_base address
1122 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +02001123 bank_base_addr = CONFIG_SYS_SDRAM_BASE;
Stefan Roesec157d8e2005-08-01 16:41:48 +02001124
1125 for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
1126 if (dimm_populated[dimm_num] == TRUE) {
1127 num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
1128 num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
1129 num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
1130 bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
Stefan Roesed2d43272007-06-01 15:09:50 +02001131 debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num,
1132 num_row_addr, num_col_addr, num_banks);
Stefan Roesec157d8e2005-08-01 16:41:48 +02001133
1134 /*
1135 * Set the SDRAM0_BxCR regs
1136 */
1137 cr = 0;
Stefan Roesec157d8e2005-08-01 16:41:48 +02001138 switch (bank_size_id) {
1139 case 0x02:
1140 cr |= SDRAM_BXCR_SDSZ_8;
1141 break;
1142 case 0x04:
1143 cr |= SDRAM_BXCR_SDSZ_16;
1144 break;
1145 case 0x08:
1146 cr |= SDRAM_BXCR_SDSZ_32;
1147 break;
1148 case 0x10:
1149 cr |= SDRAM_BXCR_SDSZ_64;
1150 break;
1151 case 0x20:
1152 cr |= SDRAM_BXCR_SDSZ_128;
1153 break;
1154 case 0x40:
1155 cr |= SDRAM_BXCR_SDSZ_256;
1156 break;
1157 case 0x80:
1158 cr |= SDRAM_BXCR_SDSZ_512;
1159 break;
1160 default:
1161 printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
1162 dimm_num);
1163 printf("ERROR: Unsupported value for the banksize: %d.\n",
1164 bank_size_id);
1165 printf("Replace the DIMM module with a supported DIMM.\n\n");
Heiko Schochera5d71e22007-06-25 19:11:37 +02001166 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +02001167 }
1168
1169 switch (num_col_addr) {
1170 case 0x08:
1171 cr |= SDRAM_BXCR_SDAM_1;
1172 break;
1173 case 0x09:
1174 cr |= SDRAM_BXCR_SDAM_2;
1175 break;
1176 case 0x0A:
1177 cr |= SDRAM_BXCR_SDAM_3;
1178 break;
1179 case 0x0B:
1180 cr |= SDRAM_BXCR_SDAM_4;
1181 break;
1182 default:
1183 printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
1184 dimm_num);
1185 printf("ERROR: Unsupported value for number of "
1186 "column addresses: %d.\n", num_col_addr);
1187 printf("Replace the DIMM module with a supported DIMM.\n\n");
Heiko Schochera5d71e22007-06-25 19:11:37 +02001188 spd_ddr_init_hang ();
Stefan Roesec157d8e2005-08-01 16:41:48 +02001189 }
1190
1191 /*
1192 * enable the bank
1193 */
1194 cr |= SDRAM_BXCR_SDBE;
1195
Wolfgang Denk1636d1c2007-06-22 23:59:00 +02001196 for (i = 0; i < num_banks; i++) {
Stefan Roesed2d43272007-06-01 15:09:50 +02001197 bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
1198 (4 << 20) * bank_size_id;
1199 bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
1200 debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
1201 dimm_num, i, ctrl_bank_num[dimm_num]+i,
1202 bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
Wolfgang Denk1636d1c2007-06-22 23:59:00 +02001203 }
Stefan Roesec157d8e2005-08-01 16:41:48 +02001204 }
1205 }
1206
Stefan Roesefd49bf02005-11-15 16:04:58 +01001207 /* Initialize sort tables */
1208 for (i = 0; i < MAXBXCR; i++) {
1209 sorted_bank_num[i] = i;
1210 sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
1211 }
1212
1213 for (i = 0; i < MAXBXCR-1; i++) {
1214 largest_size = sorted_bank_size[i];
1215 largest_size_index = 255;
1216
1217 /* Find the largest remaining value */
1218 for (j = i + 1; j < MAXBXCR; j++) {
1219 if (sorted_bank_size[j] > largest_size) {
1220 /* Save largest remaining value and its index */
1221 largest_size = sorted_bank_size[j];
1222 largest_size_index = j;
1223 }
1224 }
1225
1226 if (largest_size_index != 255) {
1227 /* Swap the current and largest values */
1228 current_size_index = sorted_bank_num[largest_size_index];
1229 sorted_bank_size[largest_size_index] = sorted_bank_size[i];
1230 sorted_bank_size[i] = largest_size;
1231 sorted_bank_num[largest_size_index] = sorted_bank_num[i];
1232 sorted_bank_num[i] = current_size_index;
1233 }
1234 }
1235
1236 /* Set the SDRAM0_BxCR regs thanks to sort tables */
1237 for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
1238 if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
1239 mtdcr(memcfga, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2));
1240 temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
1241 SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
1242 temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
1243 bank_parms[sorted_bank_num[bx_cr_num]].cr;
1244 mtdcr(memcfgd, temp);
1245 bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
Stefan Roesed2d43272007-06-01 15:09:50 +02001246 debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
Stefan Roesefd49bf02005-11-15 16:04:58 +01001247 }
1248 }
1249
Stefan Roesec157d8e2005-08-01 16:41:48 +02001250 return(bank_base_addr);
wdenkfe8c2802002-11-03 00:38:21 +00001251}
wdenkfe8c2802002-11-03 00:38:21 +00001252#endif /* CONFIG_SPD_EEPROM */