blob: 11f1bc3eab75c9f3f95416da5c5dae387e8593eb [file] [log] [blame]
Fabio Estevam47173482016-02-29 09:33:22 -03001/*
2 * Copyright (C) 2016 NXP Semiconductors
3 *
4 * Configuration settings for the i.MX7S Warp board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __WARP7_CONFIG_H
10#define __WARP7_CONFIG_H
11
Fabio Estevam47173482016-02-29 09:33:22 -030012#include "mx7_common.h"
13
14#define PHYS_SDRAM_SIZE SZ_512M
15
Fabio Estevam01f512b2016-03-26 13:30:48 -030016#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
17
Fabio Estevam6baa2612016-03-26 13:30:49 -030018/* Size of malloc() pool */
Fabio Estevam67ef2c12016-06-09 14:54:30 -030019#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
Fabio Estevam6baa2612016-03-26 13:30:49 -030020
Fabio Estevam47173482016-02-29 09:33:22 -030021/* MMC Config*/
22#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
23#define CONFIG_SUPPORT_EMMC_BOOT
24#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
25#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
26
27#define CONFIG_DFU_ENV_SETTINGS \
Fabio Estevam67ef2c12016-06-09 14:54:30 -030028 "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
Fabio Estevam47173482016-02-29 09:33:22 -030029
30#define CONFIG_EXTRA_ENV_SETTINGS \
31 CONFIG_DFU_ENV_SETTINGS \
32 "script=boot.scr\0" \
33 "image=zImage\0" \
34 "console=ttymxc0\0" \
Kevin Hilman25aaebd2016-12-16 13:08:10 -080035 "ethact=usb_ether\0" \
Fabio Estevam47173482016-02-29 09:33:22 -030036 "fdt_high=0xffffffff\0" \
37 "initrd_high=0xffffffff\0" \
Breno Limaed395222016-08-08 09:57:38 -030038 "fdt_file=imx7s-warp.dtb\0" \
Fabio Estevam47173482016-02-29 09:33:22 -030039 "fdt_addr=0x83000000\0" \
40 "boot_fdt=try\0" \
41 "ip_dyn=yes\0" \
42 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
43 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
Fabio Estevamca4f3382016-08-25 21:07:19 -030044 "finduuid=part uuid mmc 0:2 uuid\0" \
Fabio Estevam47173482016-02-29 09:33:22 -030045 "mmcargs=setenv bootargs console=${console},${baudrate} " \
Fabio Estevamca4f3382016-08-25 21:07:19 -030046 "root=PARTUUID=${uuid} rootwait rw\0" \
Fabio Estevam47173482016-02-29 09:33:22 -030047 "loadbootscript=" \
48 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
49 "bootscript=echo Running bootscript from mmc ...; " \
50 "source\0" \
51 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
52 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
53 "mmcboot=echo Booting from mmc ...; " \
Fabio Estevamca4f3382016-08-25 21:07:19 -030054 "run finduuid; " \
Fabio Estevam47173482016-02-29 09:33:22 -030055 "run mmcargs; " \
56 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
57 "if run loadfdt; then " \
58 "bootz ${loadaddr} - ${fdt_addr}; " \
59 "else " \
60 "if test ${boot_fdt} = try; then " \
61 "bootz; " \
62 "else " \
63 "echo WARN: Cannot load the DT; " \
64 "fi; " \
65 "fi; " \
66 "else " \
67 "bootz; " \
68 "fi;\0" \
69
70#define CONFIG_BOOTCOMMAND \
71 "mmc dev ${mmcdev};" \
72 "mmc dev ${mmcdev}; if mmc rescan; then " \
73 "if run loadbootscript; then " \
74 "run bootscript; " \
75 "else " \
76 "if run loadimage; then " \
77 "run mmcboot; " \
78 "fi; " \
79 "fi; " \
80 "fi"
81
Fabio Estevam47173482016-02-29 09:33:22 -030082#define CONFIG_SYS_MEMTEST_START 0x80000000
83#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
84
85#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
86#define CONFIG_SYS_HZ 1000
87
Fabio Estevam47173482016-02-29 09:33:22 -030088/* Physical Memory Map */
89#define CONFIG_NR_DRAM_BANKS 1
90#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
91
92#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
93#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
94#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
95
96#define CONFIG_SYS_INIT_SP_OFFSET \
97 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
98#define CONFIG_SYS_INIT_SP_ADDR \
99 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
100
Vanessa Maegima7d301a52016-08-19 10:21:36 -0300101/* I2C configs */
102#define CONFIG_SYS_I2C
103#define CONFIG_SYS_I2C_MXC
104#define CONFIG_SYS_I2C_MXC_I2C1
105#define CONFIG_SYS_I2C_SPEED 100000
106
107/* PMIC */
108#define CONFIG_POWER
109#define CONFIG_POWER_I2C
110#define CONFIG_POWER_PFUZE3000
111#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
112
Masahiro Yamadae856bdc2017-02-11 22:43:54 +0900113/* environment organization */
Fabio Estevam47173482016-02-29 09:33:22 -0300114#define CONFIG_ENV_SIZE SZ_8K
Fabio Estevam47173482016-02-29 09:33:22 -0300115
116#define CONFIG_ENV_OFFSET (8 * SZ_64K)
117#define CONFIG_SYS_FSL_USDHC_NUM 1
118
119#define CONFIG_SYS_MMC_ENV_DEV 0
120#define CONFIG_SYS_MMC_ENV_PART 0
Fabio Estevam47173482016-02-29 09:33:22 -0300121
122/* USB Configs */
Fabio Estevam47173482016-02-29 09:33:22 -0300123#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
124
125#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
126#define CONFIG_MXC_USB_FLAGS 0
127#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
128
129#define CONFIG_IMX_THERMAL
130
Fabio Estevam47173482016-02-29 09:33:22 -0300131#define CONFIG_USBD_HS
Fabio Estevam47173482016-02-29 09:33:22 -0300132
Fabio Estevam47173482016-02-29 09:33:22 -0300133#define CONFIG_USB_FUNCTION_MASS_STORAGE
Fabio Estevam47173482016-02-29 09:33:22 -0300134
135/* USB Device Firmware Update support */
Fabio Estevam47173482016-02-29 09:33:22 -0300136#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
137#define DFU_DEFAULT_POLL_TIMEOUT 300
138
Kevin Hilman25aaebd2016-12-16 13:08:10 -0800139#define CONFIG_USBNET_DEV_ADDR "de:ad:be:af:00:01"
140
Fabio Estevam47173482016-02-29 09:33:22 -0300141#endif